Used Atec (Total Plastics Solutions) Plastic Injection Molding Machine for sale (78,402)

Condition: used, Year of construction: 2018, clamping force: 500 kN, screw diameter: 27 mm, clearance between the columns: 360 mm, mold height (min.): 210 mm, ejector stroke: 70 mm, opening stroke: 600 mm, plate width: 500 mm, plate height: 470 mm, Equipment: documentation/manual, For sale is a used FANUC ROBOSHOT Alpha S50iA, manufactured in 2018. This compact injection molding machine is offered based on the current technical description and the attached machine photographs. Technical specifications: - Year of manufacture: 2018 - Clamping force: 500/650 kN - Screw diameter: 27 mm - Theoretical cylinder volume: 50 cm³ - Column spacing horizontal/vertical: 360 x 320 mm - Platen size: 500 x 470 mm - Mold height: 210 to 460 mm - Maximum opening stroke: 600 mm - Maximum ejector stroke: 70 mm Prjdpfszwhdijx Amxob - Core circle diameter: 125 mm - Hydraulic cores: 0 - Pneumatic circuits: 2 - Connected power: 30 kW Equipment and options: - Power transformer AC 400 V to AC 200 V - Air ejector, 3 circuits - Short shot detection - Euromap 67 - USB interface - Parallel tool movement / dosing - Parallel tool movement / ejector - Pre-injection function - Precision dosing function - Backflow measurement at the screw check valve - Nozzle with shut-off function, software - Hot runner valve control, 8 circuits (software) - Communication with temperature controllers (software) - Intelligent tool protection - Intelligent ejector protection - Tool set - Safety set - 21 freely programmable inputs/outputs - 2 analog inputs 0-10 V DC - Alarm column with audible signal - Czech operating manual Optional services available upon request: The following services can be offered upon request and are not included in the machine scope: - 1-day operator training at the customer's site - Commissioning - Automatic clamping force correction during operation Operating hours, control system, ejector force, injection speed, injection pressure, screw/cylinder design, and robot interface are not specified. The machine is offered used and in its current condition. Technical specifications and scope of supply are to be confirmed before the contract is concluded. The written confirmed scope of supply shall prevail. Inspection and further information are available upon request.

Condition: excellent (used), Year of construction: 2009, Arburg 470C 1500-400 Year of manufacture: July 2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Dosing volume: 254 cc Clamping unit: Clamping force: 150 t Type distance: 470 x 470 mm Clamping platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Core pull control Injection unit hardened - bimetal Screw diameter can be changed Dimensions: Weight: 4790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pumps/Motor: 18.5 kW Heating power: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request Prjdpszy I Ndjfx Amxob

Condition: excellent (used), Year of construction: 2011, Arburg 520H 1500-400 e² / Hybrid Machine Year of manufacture: 11.2011 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 520x520 mm Size of the mounting platens: 695x695 mm Ejector: electric Clamping unit: toggle Control system: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 on the side of the fixed mounting platen Air valve x 3 on the side of the moving mounting platen Hydraulic core pull x 1 on the side of the fixed mounting platen Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving The injection unit is driven by a servo motor controlled by an inverter Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Parallel movements Automatic tool height adjustment Dimensions: Weight: 6550 kg Length/Width/Height: 4.67x1.56x2.21 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Podpfxjzy I Imo Amxorb Price: On request.

Condition: excellent (used), Year of construction: 2006, Arburg 320C 500-170 with the Wittmann W811 robot Year of construction: 12/2006 Injection unit: Screw diameter: 30 mm Injection weight: 77 g Injection pressure: 2000 bar Dosing volume: 85 ccm Prsdpfx Amszy Ic Dexob Clamping unit: Clamping force: 50 t Distance between tie bars: 320x320 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Built-in sorting flap Robot Wittmann W811 Year of construction: 2010 4-axis robot: 3 axes are driven by servomotors (electric); axis C - pneumatic Travel in axes: X-420, Y-1200, Z-1500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 2400 kg Length/width/height: 3.41x1.47x1.99 m Drive: Pumps/motor: 11 kW Heating output: 9.4 kW Total output: 20.4 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Manufacturer: KRAUSS MAFFEI Type: KM 120-380 EX Podpfxszyn Ige Amxorb Control: MC5 Year of manufacture: 2008 Operating hours: 10113 h Technical data, clamping unit Clamping force: 1200 kN Tie bar spacing h x v: 470 x 470 mm Platen size h x v: 780 x 735 mm Minimum mold height: 200 mm Maximum mold height: 450 mm Maximum mold thickness: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centering of moving platen D: 160 mm Centering of fixed platen D: 125 mm Tool weight: 1485 kg Technical data, injection unit Screw diameter: 35 mm Injection volume: 156 cc Injection pressure: 2429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticizing rate: 27 g/s PS Injection rate into free air: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions L x W x H: 6 m x 1.7 m x 2.19 m Total weight: 9700 kg Equipment • Screen display in German • Screen display in English • CEE socket 16A • Hydraulic core pull, 2x • Machine with water manifold • Machine without material hopper • Leveling elements • EUROMAP 12 interface • Schuko socket 10A

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 2050/300 POWER injection molding machine Year of manufacture: 2005 Serial number: 155108 Control system: ENGEL CC200 Operating hours: approx. 88,000 h Design: columnless – Tie-Bar-Less Drive: hydraulic Clamping unit Clamping force: 3000 kN / 300 t Clamping system: ENGEL POWER – hydraulic, columnless Opening stroke: 900 mm Minimum mold height: 350 mm Maximum daylight opening: 1250 mm Dimensions of mounting plates: 1100 × 1000 mm Injection unit Injection unit: 2050 Screw diameter: 70 mm Injection volume: 1155 cm³ Injection weight for PS: approx. 1050 g Maximum injection pressure: approx. 1700 bar Screw L/D ratio: approx. 20:1 Control and equipment Prsdpfx Aozvdbujmxjb Control system: ENGEL CC200 Interface / robot preparation: yes Robot: none Hydraulic core control: 2 circuits Central lubrication system: yes Hydraulic oil cooling: yes Power supply Voltage: 400 V Frequency: 50 Hz Dimensions and weight Machine length: approx. 7300 mm Machine width: approx. 2200 mm Machine height: approx. 2500 mm Machine weight: approx. 20,400 kg

Condition: excellent (used), Year of construction: 2007, Engel Duo 11000H/7000H/1300 Year of manufacture: 2007 Technical Data Clamping Unit Clamping force: 13,000 kN Opening stroke: 3,000 mm Min. mould installation height: 1,000 mm Max. mould installation height: 1,800 mm Max. daylight between platens: 4,000 mm Mounting platen size: 2,200 x 1,990 mm Clear tie bar spacing: 1,530 x 1,275 mm Injection Unit 1 Screw diameter: 120 mm Dosing stroke: 570 mm Max. shot volume: 6,450 cm³ L/D screw ratio: 20 Specific injection pressure: 1,794 bar Nozzle stroke: 1,000 mm Number of heating zones: 6 Injection Unit 2 Screw diameter: 120 mm Dosing stroke: 4,800 mm Prsdpfx Ajx Up Rnemxob Max. shot volume: 5,430 cm³ Specific injection pressure: 1,370 bar Nozzle stroke: 1,000 mm

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 20 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 43 mm, clearance between the columns: 460 mm, displacement volume: 452 cm³, injection pressure: 1,340 bar, injection weight: 416 g, mold height (min.): 160 mm, ejector force: 42 N, ejector stroke: 140 mm, plate width: 690 mm, plate height: 690 mm, total length: 5,200 mm, total width: 1,400 mm, total height: 1,850 mm, overall weight: 4,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 114 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN120A5-IU604 D=43 Clamping force: 120T Tie bar spacing: 460x460 Pedpfx Ajzz Smcemxsrb Tool installation height: 160 to 520 Robot interfaces: Euromap 67, Euromap 18 Suitable 6kg or 12kg linear robot available upon request. Basic standard equipment: see brochure. Optional equipment: Water connections: 6 for fixed platens, 6 for movable platens 3 core pulls: 2 on movable platen and 1 on fixed platen 1x Harting connector for the core pull Ejector safety interface 6x cascade 1x valve connector 2x 16A sockets 1x 25A socket

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production line with the Arburg Multilift side robot / 2K machine Year of manufacture: 2003 Injection unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Psdpfx Amezy I Rhjxerb Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with the Arburg Multilift side robot 2K machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner Reinforced injection units – bimetal Proportional valves on injection units – precise injection The vertical injection unit - screw diameter: ⌀25 mm - 49 g/shot A rotary table can be purchased for an additional charge. Dimensions: Weight: 7300 kg All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request.

Condition: excellent (used), Year of construction: 2015, Arburg 420C 1000-290 e² / Hybrid machine / Production line with Arburg Multilift robot Year of manufacture: 10.2015 Injection unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2000 bar Dosing volume: 144 ccm Pedpfx Aszy I Adjmxsrb Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 6666 h in automatic mode Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - driven by servo motor with inverter - energy saving Proportional valve on the injection unit – precise injection Outputs for: Closing of the pneumatic nozzle and dosing device Arburg Multilift ML-S robot Year of manufacture: 10.2015 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Travel ranges in axes: X-400, Y-600, Z-1000 Robot with adapter, conveyor belt and safety housing Purchase of the robot and conveyor belt available at an additional cost Dimensions: Weight: 3720 kg Length/Width/Height: 4.30x1.63x2.07 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2017, Krauss Maffei KM 81-380 PX with Sepro Industrial Robot Succes 7 / Electric Machine Year of manufacture: 2020 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2429 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x370 mm Platen size: 560x510 mm Ejector: electric Clamping unit: toggle Control system: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Predpfszy Iacjx Amxeb Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Hydraulic core pull x 1 Control system with hot runner nozzles x 15 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Robot Industrial Robot Succes 7 Year of manufacture: 2017 4-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z; axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt and safety enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 7900 kg Length/Width/Height: 4.90x1.53x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron K-TEC 350-2650 / Production line with Sepro robot Year of manufacture: 2017 Injection unit: Screw diameter: 70 mm Shot weight: 1,104 g Injection pressure: 2,175 bar Dosage volume: 1,213 cm³ Clamping unit: Clamping force: 350 t Tie bar distance: 750 x 750 mm Platen size: 1,110 x 1,165 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MOSAIC - touchscreen Additional equipment: Very good technical condition High-speed machine Operating hours: approx. 10,000 h (automatic mode) Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 3 Hot runner control Hardened injection unit - bimetallic Proportional valve on injection unit – precise injection Parallel movements Machine equipped with cylinder / nitrogen accumulator (additional charge for high-speed operation) Energy-efficient machine – features a system with three variable output hydraulic pumps Machine has been regularly serviced by authorized service in Germany Dimensions: Weight: 22,000 kg Pedpfxjzy Ii Dj Amxjrb Length/Width/Height: 8.62 x 2.21 x 2.80 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the selected machine’s technical tests or participate in live technical demonstrations at our premises in Łódź. Price: On request

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 20 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 40 mm, clearance between the columns: 310 mm, displacement volume: 207 cm³, injection pressure: 142 bar, injection weight: 191 g, mold height (min.): 120 mm, ejector force: 22 N, ejector stroke: 60 mm, plate width: 470 mm, plate height: 470 mm, total length: 4,437 mm, total width: 1,418 mm, total height: 1,560 mm, overall weight: 2,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 95 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: UN60A5-IU295 D=40 Clamping force: 60T Tie bar spacing: 310x310 Podpjzzz N Tofx Amxorb Tool installation height: 120 to 330 Robot interfaces: Euromap 18 and Euromap 67 Basic standard equipment A suitable 6 kg linear robot is available upon request.

Condition: good (used), Year of construction: 2000, Krauss Maffei KM 800-8100 injection molding machine Year of manufacture: 2000 Serial number: 8I181A5 Control system: Krauss Maffei MC4 Technical data Clamping force: 8000 kN (800 t) Screw diameter: 95 mm L/D ratio: 23:1 Injection volume: 3721 cm³ Injection weight (PS): 3386 g Injection pressure: 2172 bar Maximum cylinder temperature: 375°C Screw speed: 126 rpm Injection rate: 659 cm³/s Plasticizing rate: 112 g/s Nozzle closing force: 166 kN Clamping unit Dimensions of mounting plates: 1600 × 1530 mm Distance between columns: 1120 × 1000 mm Opening stroke: 1400 mm Minimum mold height: 600 mm Maximum mold height: 1100 mm Maximum daylight opening: 2000 mm Ejector stroke: 250 mm Ejector force: 226 / 59 kN (front / rear) Electro-hydraulic system Pump motor power: 110 kW Installed heater power: 61 kW Number of heating zones: 7 Number of dry cycles (EUROMAP): 560 cycles/h Oil tank capacity: 1500 l Motor current: 235 A Total current consumption: 455 A Main fuse: 2 × 250 A Equipment Control system: Krauss Maffei MC4 Robot interface: Euromap 12 Hydraulic cores: 4 pcs. Pneumatic valves: 4 pcs. Robot preparation: Yes Central lubrication system: Yes Oil cooling system: Yes Dimensions and weight Length: approx. 10,600 mm Podpfezrw Adjx Amxsrb Width: approx. 2860 mm Height: approx. 2410 mm Weight: approx. 47,000 kg

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Psdpfx Amszy In Texerb Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2001, Arburg 320C 600-250 / machine in very good technical condition Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: clamping force: 60 t tie bar distance: 320x320 mm size of clamping platens: 446x446 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Core pull control Injection unit hardened - bimetal Built-in sorting flap Dimensions: Weight: 2330 kg Length/width/height: 3.65x1.48x1.99 m Drive: Pumps/motor: 15 kW Predezy If Eepfx Amxob Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, clamping force: 27,000 kN, screw diameter: 60 mm, clearance between the columns: 630,570 mm, injection weight: 760 g, MACHINE IN PERFECT CONDITION, AVAILABLE FOR ANY INSPECTION. Predpfx Aezw D Eismxjb

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 550-4300 GX injection molding machine Year of manufacture: 2013 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 4300 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 5500 kN / 550 t Mold opening force – pressure pads: 385 kN Platen dimensions (H × V): 1430 × 1350 mm Distance between columns (H × V): 1040 × 910 mm Maximum mold opening stroke: 1350 mm Minimum/maximum mold height: 400–950 mm Maximum distance between platens: 1750 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Prsdpfx Amszvm Dlsxob Screw diameter: 90 mm Ls/D ratio: 20:1 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Injection rate: 636 cm³/s Screw speed: 195 rpm Nozzle clamping force: 129 kN Electrical and hydraulic equipment Rated motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 728 mm Dry cycle time / stroke according to KraussMaffei standards: 2.5 s / 520 mm Oil tank capacity: 1180 l Dimensions and weight Machine dimensions (L × W × H): 8.08 × 2.80 × 2.39 m Net weight with control cabinet: 25.0 t

Condition: excellent (used), Year of construction: 2009, Arburg 420C 1000-350/150 / Production line with the Arburg Multilift H side robot / 2K machine Year of manufacture: 10.2009 Injection unit: Screw diameter: 45 mm Shot weight: 210 g Injection pressure: 1670 bar Dosing volume: 230 ccm Clamping unit: Clamping force: 100 t Tie bar distance: 420x420 mm Mold size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with the Arburg Multilift H side robot 2K machine with rotary table Control system with air valve Hydraulic core pull x 2 Control system with hot runner Reinforced injection units – bimetal Proportional valves on injection units – precise injection The vertical injection unit – screw diameter: ⌀30 mm – 71 g/shot Rotary table available at an extra charge Side robot Arburg Multilift H Year of manufacture: 2009 5-axis robot: Z-axis with servo motor (electric); X, Y, B and C axes pneumatic Safety package for robots Robot with adapter, conveyor belt, protective housing Purchase of the robot and conveyor belt available at an extra charge Prjdpfozy Iz Hsx Amxob Dimensions: Weight: 5210 kg All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request.

Condition: excellent (used), Year of construction: 2016, Engel Victory 2050/260 Tech Ecodrive with Engel Viper 20 robot / hybrid machine / operating hours: approx. 20,000 hours in automatic mode Year of manufacture: 2016 Injection unit: Screw diameter: 70 mm Shot weight: approx. 1020 g Injection pressure: 1780 bar Dosing volume: 1155 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 - touchscreen Additional equipment: Production line with Engel Viper 20 robot Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 20,000 in automatic mode Robot interface Air valve x 4 Hydraulic core pull x 2 on the side of the moving platen Hydraulic core pull x 6 on the side of the stationary platen Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Kistler sensor - tool pressure control Automatic, hydraulically operated tool mounting system, controlled via the machine control panel Integrated automatic cooling water regulator e-flomo with heating function Robot Engel Viper 20 Year of manufacture: 2016 6-axis robot: 6 axes are driven by servo motors (electric): X, Y, Z, B, C, A Payload: 11 kg Touch control panel Psdpfxozy Iv Ds Amxjrb Safety package for robots Robot with adapter, conveyor belt and safety enclosure Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 21000 kg Length/Width/Height: 7.36x2.06x2.37 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: Upon request

Condition: reconditioned (used), Year of construction: 2002, operating hours: 45,992 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 28 mm, injection pressure: 1,069 bar, injection weight: 9 g, total length: 2,050 mm, total width: 1,030 mm, total height: 2,780 mm, overall weight: 900 kg, warranty duration: 6 months, Equipment: documentation/manual, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this Boy 22AVV injection moulding machine. Prsdpoywx Hqefx Amxjb Vertical clamp with vertical injection is ideally suited for insert moulding, the operator can load parts for over moulding easily. The pneumatic gate ensures safe operation. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: excellent (used), Year of construction: 2012, Engel Victory 1350/300 Tech Ecodrive with Sepro Industrial Robot SDR 22S / Hybrid Machine / Operating Hours: approx. 18,000 hours in automatic operation Year of Construction: 2012 Injection Unit: Screw Diameter: 60 mm Shot Weight: approx. 670 g Injection Pressure: 1835 bar Dosing Volume: 735 ccm Clamping Unit: Clamping Force: 300 t Tie Bar Spacing: 0x0 mm Platen Size: 1200x1000 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: CC 200 - Touchscreen Prsdszy Iwhspfx Amxeb Additional Equipment: Production line with Sepro Industrial Robot SDR 22S Machine in very good technical condition Operating Hours: approx. 18,000 hours in automatic operation Tie-barless, hybrid machine: energy-saving and very quiet Hydraulic core pull x 2 Control system with hot runner system x 12 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - driven by a servomotor with inverter - energy saving Proportional valve on the injection unit – precise injection Option to purchase spacer plates (movable and fixed), water-cooled plates, screw hole diameter M20 Material supply system Motan (dosing and conveying unit) available at an extra charge Robot Sepro Industrial Robot SDR 22S Year of Construction: 2016 4-axis robot: 3 axes are driven by servomotors (electric); Axis C - pneumatic Travel distances in axes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Safety package for robot Robot with adapter, conveyor belt, and protective housing from Engel Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 19900 kg Length/Width/Height: 7.06x2.13x2.30 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, Arburg 270C 400-70 e² with Arburg Multilift Robot / Hybrid Machine Year of manufacture: 2016 Injection Unit: Pjdpfozy Ib Tjx Amxorb Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosage volume: 34 ccm Clamping Unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: energy efficient and extremely quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetallic Main machine motor - servo motor with inverter drive - energy saving Proportional valve on injection unit – precise injection Self-sealing nozzle Arburg Multilift Select 6 kg traverse robot Year of manufacture: 05.2016 5-axis robot: 3 axes driven by servo motors (electric); axes B and C Travel paths in axes: X-600, Y-800, Z-1000 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 2210 kg Length/Width/Height: 3.18x1.43x1.98 m All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2001, Engel ES 1350/275 HL with Engel ERC 53/1-E Robot / Machine in very good technical condition Year of manufacture: 2001 Injection unit: Prsdpfjzy Iwbox Amxsb Screw diameter: 60 mm Shot weight: 547 g Injection pressure: 1834 bar Metering volume: 618 cm³ Clamping unit: Clamping force: 275 t Tie bar distance: 0x0 mm Platen size: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 100 Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-barless machine Hydraulic core pull x 3 Hot runner control x 16 Injection unit hardened - bimetallic Machine has been regularly serviced by authorized Engel service Dimensions: Weight: 20,000 kg Length/Width/Height: 7.10x2.15x2.30 m All offered machines are started and tested by our service technicians before sale. You can request a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 370H 600-100 / Hybrid Machine Year of manufacture: November 2011 Injection unit: Screw diameter: 20 mm Injection weight: 29 g Injection pressure: 2500 bar Dosing volume: 31 cc Clamping unit: Clamping force: 60 t Type distance: 370 x 370 mm Clamping platen size: 510 x 510 mm Ejector: electric Clamping unit: toggle-type Control system: SELOGICA - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Pedpfjzy If Sex Amxerb Air valve x 3 Hydraulic core pull x 1 Control system with hot runners x 12 Hardened injection unit - bimetal Main machine motor - servo motor driven by an inverter - energy saving The injection unit is driven by the servo motor Driven by an inverter Machine with cylinder/battery with compressed nitrogen (additional charging for fast work) Central lubrication Dimensions: Weight: 3190 kg Length/Width/Height: 3.68 x 1.45 x 2.04 m All offered machines are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request