Used Avalon Sciences Ltd Geophone for sale (3,791)

Condition: used, Haas TM1, Year 02/2009, 4000RPM Spindle. BT40, Laedpfx Aozvrhijcfef

Condition: used, Haas Mini Mill with 4th Axis 5C Collet System (HA5C P1), 10 Station ATC, 6000RPM, Table 12 x 28", Coolant Lasdezvrgxjpfx Acfjf

Condition: used, Haas Mill, New 2018, Table 12 x 36", 10 Station ATC, BT 40, 6000RPM Spindle, USB, Coolant. Lasdozvrf Uspfx Acfof

Condition: used, Haas St 10, 6.5" Diameter 3 Jaw Chuck, Serial No 3092094, Year 05/2015, Complete with Multifeed MX-1B Bar Feed Unit, Note no tailstock. Lasdpjzvrd Rsfx Acfsf Specifications: Swing: 25.25" Machining Length: 16.5" Chuck Size: 6.5" Bar Capacity: 1.75" Power: 15 hp Max RPM: 6,000 RPM Turning Dia: 14"

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 12,000 kg, input voltage: 415 V, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. This production line comprises of the following equipment/machinery: 1. 2 x sets of tooling complete with trollies, one set for pies with casing diameter of 110mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 6. Rademaker Tamping unit 1 (used to tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘TAMPING UNIT’ 2 for tamping filling down into casings. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Crimping unit / marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie exit/discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. Laodpfx Acjzvmy Hsfef 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. NOTES – BUYER TO REMOVE FROM SITE.

Condition: used, Year of construction: 2006, FANUC ROBOCUT ALPHA- OiC WIRE ERODING MACHINE YEAR: 2006 X STROKE: 320.0mm RAPID: 900mm/min Y STROKE: 220.0mm RAPID: 900mm/min Z STROKE: 255.0mm RAPID: 900mm/min U STROKE: 120.0mm RAPID: 450mm/min V STROKE: 120.0mm RAPID: 450mm/min MAX. TABLE WEIGHT: 500.0 kgs COMPLETE WITH.... CHILLER SYSTEM COOLANT FILTRATION SYSTEM TRANSFORMER Ledpjzv En Asfx Acfeaf RENISHAW MACHINE MANUALS

Condition: used, Year of construction: 1987, FRIEDRICH DECKEL PRECISION MILLING MACHINE MODEL: FP4M YEAR: 1987 approx. HEIDENHAIN DIGITAL READ OUT CLEAN Lajdpfx Acezv Eg Ssfof

Condition: used, Year of construction: 2001, functionality: fully functional, OKAMOTO ACC 64 DX Surface Grinding Machine Lodpfxezv Ef Us Acfjaf Year: 2001 Servo Automatic Downfeed Electromagnetic chuck Coolant filtraion system

Condition: new, Model MDH 3 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 3 Micron Dryer manufactured by Hosokawa Micron. Installed Power – 45 kW (Rotor) 2,2 kW (Classifier) Airflow - 6,000 m3/hour Evaporative 600 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder, natural gas fired air heater and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Lodpezvxxnjfx Acfoaf Please check out our other listings and subscribe to our stock list.

Condition: used, Model MDH 2 Hosokawa Micron Dryer Ledozvxvajpfx Acfsaf Flash Drying of Filter Cakes, Powders and Granules. Model MDH 2 Micron Dryer manufactured by Hosokawa Micron. Machine was built in 1995 for a pilot plant operation drying a Precipitated Calcium Carbonate (PCC) Filter Cake. The dryer ran periodically for around 2 years and has been in storage ever since. Installed Power – 30 kW (Rotor) 2,2 kW (Classifier) Airflow - 3,000 m3/hour Evaporative 310 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: repair required (used), Year of construction: 2006, functionality: not functional, machine/vehicle number: 143527, 1 x VMI heavy-duty industrial fork mixer designed for bakery production supplied with 2 x 330L bowls. Lodjzvydfopfx Acfoaf Model – 2330MAEHW. Serial number – 143527. Date of manufacture – 2006. Bowl capacity – 330 litres (per bowl). Dough capacity – 150 kg (approx.). Electrical requirements – 400 V / 50 hz / 3 phase. Power – 18.6 Amps / 8.67 kW. NOTES – Suitable for refurbishment or spares / repairs only.

Condition: repair required (used), Year of construction: 2000, functionality: limited functionality, machine/vehicle number: 121982, 1 x VMI heavy-duty industrial fork mixer designed for bakery production supplied with 2 x 330L bowls. Model – 2330MAEHW. Serial number – 121982. Date of manufacture – 2000. Bowl capacity – 330 litres (per bowl). Dough capacity – 150 kg (approx.). Electrical requirements – 400 V / 50 hz / 3 phase. Lasdozvybqepfx Acfsf Power – 18.43 Amps / 8.67 kW. NOTES – Works but suitable for refurbishment or spares / repairs only.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 371, total length: 2,200 mm, total width: 1,250 mm, total height: 2,150 mm, input voltage: 400 V, power: 10 kW (13.60 HP), input frequency: 50 Hz, 1 x Weber high-speed slicer suitable for the industrial slicing of various products such as meats, sausage and cheese. Manufacturer - Weber Maschinenbau. Model - CCS-602. Serial number – 371. Laodpfx Acezvx Dkofsf Date of manufacture - 2003. Knife – 460mm diameter circular knife. Speed / output – up to 600 slices / minute. Maximum product length – 1,200mm long. Product cutting thickness – 0.1mm to 50mm (depending on product). Electrical requirements – 400 V / 50 hz / 3 phase. Power – 10 kW. Air (pneumatic) requirements – 10 bar. Overall dimensions – 2200mm long x 1250mm wide x 2150mm high.

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Lodpfx Acor Hr Arsfoaf Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total length: 9,250 mm, total width: 1,200 mm, total height: 2,200 mm, overall weight: 1,500 kg, input voltage: 415 V, input frequency: 50 Hz, 2021 Complete Coating, Breading and Battering line, suitable for poultry, seafood, red meat, plant-based proteins, and cheese products. This system comprises of the following machinery: Manufacturer - Jinan Hiwell. Date of manufacture - 2021. 2 x DJJ100-II Batter Mixers mounted on mobile frame, and each fitted with a Flat Vane Pump. Mixing vessel capacity – 100 litres (per unit). 1 x SJJ600-IV Batter Coating machine with recirculating pump. While the products pass through the batter shower on the conveyer, the underside of the products are coated by the batter stored in the tank; the topside is enclosed with batter by the batter weir fall. 1 x SXJ600-IV Breading/Flouring Machine. This works as a continuous, automated system that applies an even, uniform layer of dry flour or breadcrumbs to food products. As products enter the machine, they ride on a wire-mesh conveyor belt that passes over a bed of flour or breadcrumbs, coating the underside of the food. Heavy-duty air blowers and vibrators remove loose, excess flour or crumbs from the coated products before they exit the machine. An integrated screw and circulation system continuously gathers, sifts, and recycles the unused flour or crumbs back into the hopper to maintain high material efficiency. 1 x NJJ600-IV Tempura Battering Machine. This machine automatically applies thick or thin tempura batters to products through an immersive dipping process. As food moves along the line, it travels between an upper and lower mesh belt that completely submerge the product into a batter bath, ensuring 100% coverage. It is built specifically to handle the high viscosity characteristic of traditional tempura batters. You can easily adjust the gap between the upper and lower mesh belts to accommodate products of varying sizes and shapes. Output capacity – up to 500 kg/h (approx.), subject to the product, belt speed, coating pickup, and product spacing. Electrical requirements – all machines are rated to 415 V / 50 hz / 3 phase. Laedszvrfbjpfx Acfef Useable wire mesh conveyor belt width – 600mm wide. Total line/system footprint dimensions – 9.25m long x 1.2m wide x 2.2m high.

Condition: used, This listing is for a Siemens Immulite 1000 Automated Immunoassay System The unit is in full working condition and ready for immediate use Lasdpfx Acjxzhmfefjf The Siemens Immulite 1000 is a compact benchtop automated immunoassay analyser designed for routine and specialised testing. It provides random-access operation, enzyme-amplified chemiluminescence technology and throughput of up to 120 tests per hour. It supports serum and plasma samples and offers a broad assay menu.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 50,000 l, usable tank capacity: 30,000 l, total height: 4,275 mm, inner diameter: 4,000 mm, outer diameter: 4,020 mm, overall weight: 4,250 kg, wall material: stainless steel, wall thickness: 10 mm, operating temperature: 100 °C, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 10mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 30,000 Litres. Shell ID: 4,000mm. Overall Height: 4,275mm. Shell & Dish Wall Thickness: 10mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 4,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19785. Factory Tested: July 2021. Nozzles and fittings include 610mm hinged manway with grill, triple CIP sprayball arrangement, inlet connections, vent, pressure relief valve connection, Endress & Hauser hygienic thermowell, dual level switches, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Lasdpfxezhn Rqs Acfof Please contact us for further information or to discuss delivery and installation options.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 100,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Laedpjzhnlzsfx Acfef Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: used, Bitzer LHV7E/4CE-9F3Y-40S Condensing Unit Bitzer Ecostar condensing unit, with integrated frequency inverter, duel speed controlled EC fans, cooling capacity approx 32Kw, 3Ph Laedpfozvlnpjx Acfjf

Condition: used, HARDINGE Conical Ball Mill 6’-0” dia x 36” ball mill for the dry grinding of industrial minerals. Mill fitted with Manganese steel liners for operation will steel ball grinding media. White Metal Bearings on trunnions. 90 kW Motor fitted (could be reduced to 75 kW). Laedszvgvnjpfx Acfjf Mill with countershaft drive but could be converted to gearbox.

Condition: used, Clyde Denseveyor Model 50/12/6 Denseveyor Features the "dome valve" on the feed inlet and product outlet for optimum performance and reliability. Capacity: 1420 litres Inlet: 300 mm dia Conveying Pipeline: 150 mm (6”) NB Vessel No. 5669/2 Year of Manufacture: 2007 Includes dome valves on inlet, outlet and vent line. Lasdpfx Acozvgu Refsf Overall height of vessel including isolation valve above inlet: 2960 mm. Dense phase pneumatic conveying of powders and granules. 2 machines available. Also, a 70/12/6 Denseveyor.

Condition: good (used), Year of construction: 2019, Centauro MTE-4J2-24 Industrial cubic air evaporator 2019, used for commercial refrigeration and cold rooms, powered by dual 450mm fans, cooling capacity of around 24Kw, two in stock, 3Ph Laodszvllbopfx Acfef

Year of construction: 2020, condition: good (used), Gough Engineering Sieving station and filtration unit Lasdpfozvlk Dox Acfef Stainless, sieving station with WMF dust extraction unit, 555mm diameter mesh, 3Ph

Condition: good (used), Robot Coupe R60 Vertical Cutter Mixer Stainless, 60L bowl capacity, three blade assembly, safety lid, variable speed, with timer, 3Ph Lasdpfozvlkwsx Acfef

Condition: good (used), Murzan PI-50 Double diaphragm pump Lsdpfx Acjzvlkqsfjaf two in stock, ideal for handling suspended solids or shear sensitive products with no damage, easy to clean in place, applications juice, drinks, tomato paste, ketchup, yogurt, cottage cheese, eggs and more, 3 inch inlet and outlet, download PDF for full spec