Used Balestrini Cp 100/6 for sale (64,105)

Condition: excellent (used), El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Hedpfsy Uuu Esx Ap Hsnn Salt: AS200 Washing system

Condition: used, maximum load weight: 2,000 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,675 mm, loading space width: 1,515 mm, loading space height: 30 mm, Gross weight: 2,600 kg, high-loader, open platform, overrun braked, rear tipper with pump, cordless screwdriver included. Loading height: 700 mm. Errors and prior sale excepted. Hnodpfx Apeym Ih Uo Hjn

Condition: ready for operation (used), Hydraulic press PYE 160 S - 2 units available Specifications: Capacity: 160 tons Hnjdpfjzdanzjx Ap Hjn Working pressure: 16 MPa Upward speed: 125 mm/sec Downward speed: 200 mm/sec Slide stroke: 500 mm Daylight: 360 mm Max. distance between table and slide: 800 mm Ejector capacity on the table: 63 tons Max. extraction depth: 200 mm Voltage: 380 V Total required power: 17 kW Nominal current: 35 A Total weight: 7 tons Hydraulic press ERFURT PYE 100 S - 2 units available Capacity: 100 tons Table dimensions: 750x560 mm Ram dimensions: 530x400 mm Table height above floor: 710 mm Max. shut height: 800 mm Throat: 360 mm Stroke: 500 mm Downward speed: 320 mm/sec Upward speed: 200 mm/sec Connection power: 17 kW Press weight: 5 tons

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: SV 5960/1, overall weight: 73 kg, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 21 A, type of input current: three-phase, rotational speed (max.): 2,930 rpm, protection type (IP code): IP55, For sale is a high-performance air blower / side channel compressor with a high-quality 11 kW three-phase motor. This unit is suitable for industrial applications such as ventilation and exhaust systems, dust extraction, pneumatic conveying, drying systems, or process air supply. Technical data: Power: 11 kW Voltage: 400 V (three-phase) Hodpfx Apey U Uhls Honn Frequency: 50 Hz Current consumption: 21.8 A Speed: 2,930 rpm Efficiency: IE3 Premium Efficiency (91.2%) Protection class: IP55 Insulation class: F Operating mode: S1 (continuous operation) Frame size: 132M Design: IMB5 Ambient temperature: up to 40 °C Weight: approx. 73 kg Made in Germany

Condition: good (used), Year of construction: 1978, scissors lift table make.TREPEL type:S100/6 year 1978 Load capacity: 10 000Kg. Working pressure : 220 Bar Panel size : LXB 2500mmX1250mm Height min: 670mm Hsdpjfluupefx Ap Hjnn Max height : 1230mm Operation via foot pedal .

Condition: used, machine/vehicle number: 13260, Rotor diameter: 600 mm Rotor width: 1000 mm Rotor knives: 5 Stator knives: 2 rows Infeed opening approx. 720 x 980 mm Drive motor: 75 kW Wet mill Hnedpjyr Txcofx Ap Hen

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower, side channel compressor with reversing valve -Type: Elmo-G 2BH6 100-0AC12 -Drive: 2.2 kW -Speed: 2860 rpm Hnjdpfx Apoy Tubpj Hsn -Dimensions: 375/335/H385 mm -Weight: 30.7 kg

Condition: used, Technical details: width: 1300 mm depth: 1000 mm height: 1600 mm weight of the machine ca.: 1950 / 1860 Stück kg 3pieces available (price per piece) according to DIN 650:nach DIN 650: T-Nutenbreite a=27,5; h= 55; b= 49; c= 21 mm; Abstand der T-Nuten 200 mm Spannfläche: B: 1300 x H: 1600 x Dicke: 63 mm Hjdpfxju Sq Ubo Ap Hjnn Bei Ihrer Anfrage beziehen Sie sich bitte auf die Anzahl der gewünschten Aufspannwinkel. *

Condition: used, mileage: 123,844 km, power: 74 kW (100.61 HP), first registration: 10/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,660 mm, fuel: diesel, CO₂ emissions: 166 g/km, fuel tank capacity: 60 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 4,540 mm, total width: 1,840 mm, total height: 1,860 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, electric window regulation, electronic stability program (ESP), fog lights, full service history, onboard computer, power assisted steering, power mirror, sliding door, traction control, trailer coupling, General information Number of doors: 5 Model range: May 2018 - Apr 2024 Cab: single Technical information Number of cylinders: 4 Engine capacity: 1.499 cc Measures length/height: L1H1 Weights Empty weight: 1.536 kg Carrying capacity: 844 kg GVW: 2.380 kg Interior Interior: black Consumption Average fuel consumption: 4,7 l/100km (60 MPG) Urban fuel consumption: 5 l/100km (56 MPG) Extra urban fuel consumption: 4,5 l/100km (63 MPG) Maintenance, history and condition Service history: Present (serviced by dealer) Number of owners: 3 APK (MOT): tested until 10/2026 Number of keys: 2 (2 hand transmitters) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Bluetooth car kit - Driver's airbag - Electrically operated front windows - Front central armrest - Front fog lights - Heated door mirrors - Heated windscreen - Height adjustable driver's seat - Height adjustable steering wheel - Immobiliser - Loading floor - Panelling - Partition - Radio - Rear doors - Remote central locking - Sliding side door right Hsdpfxoy Ti Svo Ap Hjnn - Telephone enabled with Bluetooth - Third brake light

Condition: used, Year of construction: 2000, Complete Mini Dairy Line – Seital 05X Separator + Malldison 1,000 L/h Self‑Heated Pasteuriser + Fords Little Gem 6/2 Glass Pint Bottle Filler Ideal for: Small dairies, farm bottling, cream production, test plants and product development. Line is designed for approx. 1,000 L/h milk processing into glass pint bottles. 1) Seital 05X Cream Separator • Make/Model: Seital 05X disk‑stack centrifuge • Application: Milk clarification / cream separation • Typical capacity: up to approx. 1,000 L/h (depending on product and setup) • Construction: Stainless steel product contact parts • Features: • Designed for continuous operation in dairy service • Compact footprint – suitable for small plants/farm dairies • Complete with bowl, drive and base frame • Condition: Used, in good overall condition; available for inspection • Suitable for: Whole milk separation into cream and skim milk prior to pasteurisation or standardisation. 2) Malldison 1,000 L/h Self‑Heated Pasteuriser • Make: Malldison • Capacity: 1,000 L/h • Type: Self‑heated HTST plate pasteuriser – no separate external boiler required • Product: Cow’s milk (also suitable for similar liquid dairy products) • Key features: • Plate heat exchanger with regeneration, heating, holding and cooling sections • Self‑contained heating system (self‑heated) for convenient installation Hsdpfxoy Rk T Aj Ap Hjnn • Designed for standard dairy temperatures (e.g. 72–75°C for 15 seconds, depending on setup) • Includes balance tank, pumps and control panel (as pictured / supplied) • Condition: Used, previously in dairy service, offered as is / tested prior to dispatch (as agreed). 3) Fords “Little Gem” 6/2 Glass Pint Bottle Filler • Make/Model: Fords “Little Gem” • Type: 6/2 rotary filler for glass pint milk bottles • Configuration: • 6 filling heads, 2 capping stations (6/2) • Suitable for returnable glass pint bottles • Application: • Filling pasteurised milk into pints for local delivery / farm shop / retail • Compact machine ideal for small to medium‑scale bottling • Features: • Stainless steel contact parts • Adjustable for standard UK‑style glass pint bottles • Simple, robust design with easy operation and cleaning • Condition: Used, good working order when last in production; inspection and test run available by arrangement. Line Summary This package offers a complete small‑scale milk processing and bottling line: 1. Seital 05X – separation of cream and skim milk 2. Malldison 1,000 L/h self‑heated pasteuriser – HTST pasteurisation without external boiler 3. Fords Little Gem 6/2 – rotary filling of glass pint bottles • Approximate throughput: up to 1,000 L/h (depending on product and operating conditions) • Ideal for: farm dairies, local milk brands, glass bottle milk delivery or artisan dairy operations. Additional Services (optional – include what you actually offer) • Loading and packing for transport • Assistance with installation/start‑up emote or on‑site by agreement • Export documentation if required

Condition: good (used), functionality: fully functional, Year of construction: 2023, total height: 3,500 mm, total length: 15,000 mm, total width: 6,500 mm, load capacity: 100 kg, Used ABUS and Yale Single-Girder Overhead Crane System EHB – HB110S Profile – incl. GM2 100 Electric Trolley For sale: a used ABUS single-girder overhead crane system (EHB) equipped with HB110S crane profiles. This system is suitable for light to medium-duty internal lifting and material handling applications in workshops, production facilities, and warehouses. Technical specifications: Manufacturer: ABUS Kransysteme/Yale Year of manufacture: 2023 and 2021 Type: EHB single-girder overhead crane Profile type: HB110S (500kg capacity) Fitted with power supply conductors Available track lengths: - 12,250 mm - 14,000 mm - 12,250 mm Hnsdpfx Ajyyq Ilop Hsn - 14,750 mm - 15,750 mm Crossbeams / Swing Beams: Length: 6,500 mm Quantity: 5 pcs (each length has 1 swing beam and chain hoist) Hoisting Equipment: - ABUS electric trolley - Type: GM2 100 The system is suitable for extension or integration into an existing EHB suspension crane installation. Ideal for efficient internal transport of materials and components within a production area. Scope of delivery: - As shown / dismantled from operation - Including crane documentation, drawings, and photos For more information, additional photos, or a quotation, please feel free to contact us. Price per unit: from €3,250.00 3 x Abus, 2 x Yale. Also available as a lot: 5 units.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, We are selling this grinding machine, which is connected and available for testing. Machine parameters: - Grinding of rotational parts clamped between centers with an accuracy of 0.001 mm - Max. swing diameter: 0–1,450 mm - Max. turning length: 6,000 mm - Max. workpiece weight: 20,000 kg (25,000 kg with steady rests) - Grinding wheel diameter: 915 mm - Wheel width: 100 mm - Non-contact measurement of dimensions, tolerances, and workpiece geometry, including printout of measurement protocol - 100% ultrasonic measurement possible - CNC control with capability for profile grinding (taper, concave and convex, CVC) - Grinding of ceramic and metallic coatings using diamond and ceramic grinding wheels The machine is currently completing an order. Hnodpfjxxrzzsx Ap Hon

Condition: good (used), machine/vehicle number: 2521, Year of construction: 2014, load capacity: 10,000 kg, lifting height: 5,500 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 5,000 mm, total width: 2,900 mm, operation weight: 16,660 kg, additional equipment features: Centralized greasing system, Engine heater, Equipment: lighting, Kalmar DCG100-6 from Uniktruck Hedpfeyuhn Rex Ap Hsnn Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 11.00x20 Wheel size – Steering wheel: 11.00x20

Condition: used, B&R X20 CP 3586 IF 2772 DI 9371 DO 9322 RA2038 Manufacturer: B&R Industrial Automation Hjdpfxok Abwls Ap Henn Components: 1x X20 CP 3586 3x X20 IF 2772 2x X20 DI 9371 1x X20 DO 9322 Intel ATOM 1.6 GHz with additional I/O processor Ethernet, POWERLINK with Poll Response Chaining and USB on board 3 slots for modular interface expansion CompactFlash as exchangeable program memory 512 MByte DDR2 SDRAM main memory Controller redundancy possible Fanless Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany

Condition: used, Year of construction: 1999, Transnorm spiral helix belt curve conveyor left 90°-775-600 IR600 RA2008 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 frame width (NB): 775 mm belt width (GuB): 600 mm overall height (BH): 210 mm Hnedpfx Apjk Abtpe Hjn inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 191mm rising) Incline: 191 mm / 90° = 764 mm / 360° Support feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gearmotor SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) year of construction: 1999 Optionally available: Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1998, Transnorm curved belt conveyor left 90°-800-600-IR600 RA2169 Make: Transnorm Running direction: 90° left running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 800 mm Nominal/outer width with Motor (MB): 1020 mm Inner radius (IR): 600 mm Height frame (BH): 200 mm Height frame with Motor (MH): 400 mm V 220/380, 0,37kW Conveying speed: contat us Optionally available: Supports Side guide one- and both sideds Frequency converter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Hnedpfeq Awytjx Ap Hon For individual, expert advice, simply get in touch with us. Just contact us by phone or mail or visit our website We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1996, Technical details: Manufacturer: Transnorm Type: belt curve 60° TS 1500 100 belt bend conveyors POS. 164 Year of construction: 1996 Hnodok Aa Acjpfx Ap Hon Angle: 60° Direction: Right Nominal radius: approx. 600 mm Width: 400 mm Usable width be expanded through fit the outer Guide Strap type: KT 58 Number: 1 x (article no. 20140058) Condition: Used / fully functional Color: Grey More information: incl. Guide Gear motor Manufacturer: SEW eurodrive Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Max. punching force: 600 kN Max. shear force: 1000 kN Punches 20 mm holes in 19 mm steel Cuts on the flat bar shear up to 500 mm with material thickness of 12 mm steel Further technical data on request Hnedoq D E Tcspfx Ap Hen With a range of punches and dies as desired Very good condition

Condition: used, Year of construction: 1986, pulling force - max. 6,3 t max. ram stroke 1000 mm max. workpiece diameter 400 mm groove width 6 mm total power requirement 2,9 kW weight of the machine ca. 1,5 t Hnsdpfx Apoy Ty Afo Hen dimensions of the machine ca. 1x1x2,2 m

Year of construction: 2006, condition: used, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling cutter Corner rounding unit Grooving unit Pressing system Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Number of motors: 2 Hedpfx Apsy Ur Hls Henn Positioning via NC Edge processing unit 2: Rough milling, top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522

Condition: good (used), machine/vehicle number: 1379, Year of construction: 2008, load capacity: 12,000 kg, lifting height: 5,000 mm, mast type: duplex, fork length: 2,400 mm, total length: 4,660 mm, total width: 2,500 mm, operation weight: 17,760 kg, additional equipment features: Centralized greasing system, Diesel cabin/engineheater, Kalmar DCE100-6 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Hnedpjyuhggjfx Ap Hon Wheel size – Drive wheel: 11.00-20 Wheel size – Steering wheel: 11.00-20

Condition: used, mileage: 139,972 km, power: 74 kW (100.61 HP), first registration: 06/2021, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,660 mm, fuel: diesel, CO₂ emissions: 137 g/km, fuel tank capacity: 60 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 4,560 mm, total width: 1,850 mm, total height: 1,870 mm, Year of construction: 2021, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, navigation system, onboard computer, power assisted steering, power mirror, sliding door, trailer coupling, General information Number of doors: 5 Model range: May 2018 - Apr 2024 Cab: single Technical information Number of cylinders: 4 Engine capacity: 1.499 cc Measures length/height: L1H1 Weights Empty weight: 1.517 kg Carrying capacity: 658 kg GVW: 2.175 kg Interior Interior: black Consumption Average fuel consumption: 5,1 l/100km (55 MPG) Maintenance, history and condition Service history: Present (serviced by dealer) APK (MOT): tested until 12/2026 Number of keys: 1 (1 hand transmitter) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Car kit - Co-driver's bench - Driver's airbag - Electrically operated front windows - Front central armrest - Front fog lights - Heated door mirrors - Heated windscreen - Height adjustable driver's seat - Height adjustable steering wheel - Immobiliser - Loading floor - Multifunctional steering wheel Hnjdpfxexf Tw Ds Ap Hsn - Panelling - Partition - Radio - Radio with DAB+ - Rear doors - Rear parking sensor - Remote central locking - Sliding side door right - Telephone enabled with Bluetooth

Condition: new, Year of construction: 2025, machine/vehicle number: 20250205007, Field of application: Construction Empty weight: 385 kg Generator capacity: 100 kVA Dimensions of cargo space: 82 x 54 x 62 cm CE mark: yes Hedpfx Apswqbq Ej Honn Frequency: 50 Voltage: 400 Production country: CN Please contact Team DPX for more information

Condition: ready for operation (used), Year of construction: 2013, number of axes: 3, total width: 1,630 mm, product length (max.): 5,875 mm, This 3-axis CMS NC PF 100 TCU was manufactured in 2013. It features a maximum tool length of 210 mm and a maximum tool diameter of 35 mm. The machine includes an automatic tool changer and a feeding conveyor with rollers, enhancing its operational efficiency. If you are looking to get high-quality CNC wood machining capabilities, consider the CMS NC PF 100 TCU machine we have for sale. Contact us for further details. • Material capacity: • Min: width 30 mm, length 150 mm, thickness 5 mm • Max: width 150 mm, length 2000 mm, thickness 15 mm • Tooling: • 8-position rack with pneumatic movement Hodoy S Sygspfx Ap Hsnn • Automatic tool changer • Max tool length: 210 mm • Max tool diameter: 35 mm • Power and utilities: • Power supply: 400V ±10/-15%, 50/60 Hz • Operating pressure: 6 bar • Software and monitoring: • CMS Manager software • Real-time spindle monitoring • Remote diagnostics capability • System dimensions: • Length: 5875 mm • Including infeed conveyor: 1985 mm • Including out conveyor: 2160 mm • Width: 1630 mm • Special modifications: • Mechanical: • Working height adjusted to 960 mm (from 965 mm) • 50 mm isolation plate + 10 mm sheet for EHRT alignment • Double-channel emergency stop system (enhanced safety) • Automation & integration: • Specialized I/O signal interface for EHRT communication • Ethernet connectivity (TCP/IP) • File-based protocol: for part code tracking • Bidirectional signal exchange (Ready Part Load, Part Loading, Emergency) Additional equipment • Feeding conveyor with rollers • Slow down photocell for approach detection • Unloading conveyor for finished parts • Waste collection tanks under working area • Display (15" TFT color monitor) • Safety enclosure against moving parts • External air-oil mist spray device (replaces original 6 l unit)

Condition: good (used), overall weight: 41,000 kg, Year of construction: 2004, operating hours: 5,500 h, Single-toggle jaw crusher Inlet: 1,000 x 650 mm Finished product: approx. 0/70-0/200 mm Feed hopper, vibrating feeder Electric drive with 220 kVA generator Side and main discharge conveyor Hjdpfxjtpakte Ap Henn Overhead magnet