Used Behringer Hbp 310-523 Ga Na 3000 Pc for sale (22,043)

Condition: used, Year of construction: 2006, number of axes: 3, working width: 2,040 mm, working length: 3,680 mm, TECHNICAL DETAILS MACHINING PROCESS Machining process: Drilling and milling WORKING AREA X-axis working area: 3,680 mm Y-axis working area: 2,040 mm Number of working areas: 2 Number of controlled axes: 3 Dcjdpez Enz Ujfx Adron WORKTABLE Table type: Flat table / Nesting table Number of tables: 1 Table width: 3,680 mm Table length: 2,040 mm Table material: Aluminum DRILLING UNIT Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 7 Horizontal drilling spindles, X-axis: 2 Horizontal drilling spindles, Y-axis: 2 Total number of drilling spindles: 11 MILLING SPINDLE Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 3 Motor power: 13 kW Speed: 24,000 rpm Automatic tool changer: yes TOOL MAGAZINE Number of tool magazines: 1 Tool slots: 12 Tool magazine: positioned at the head VACUUM SYSTEM Number of vacuum pumps: 1 Suction capacity: 250 m³/h CONTROL AND SOFTWARE Control: PC-based control Programming software: Xylog Plus MACHINE DETAILS MAIN DRIVE Power of main electric spindle: 13 kW SAFETY CE marking: yes Protective guard: permanently mounted on the machine Safety system: front safety mats EQUIPMENT Aluminum nesting table Suction cups for workpiece clamping Vacuum pump Drilling unit with 11 drilling spindles Milling spindle with automatic tool changer Tool magazine with 12 tool slots PC-based control Programming software Xylog Plus Protective guard permanently mounted on the machine Front safety mats

Condition: ready for operation (used), Siemens 1FT5064-0AC71-2-Z Permanent Magnet Motor, without encoder!, serial number as shown in the photo, used, professionally overhauled and tested, with a 12-month warranty on replaced components, 100% functional, scope of delivery as shown in the photos. Djdpji D R T Djfx Adrjcn

Condition: used, This listing is for a Atas Optic 2 Programmable Injector GC Dcjdpfxsxzhrzs Adrjn

Condition: used, This listing is for a Varian Saturn 2100T GC/MS ion trap with turbomolecular pump comes complete with Varian CP-8200 Autosampler Varian 3900 GC-gas chromatograph, includes Software/PC/Printer Dedpoxzh A Tefx Adrscn Equipment can be serviced/renovated/refurbished on request at extra cost.

Condition: used, This listing is for the Techne TC 3000 Well Thermal Cycler The unit is in full working condition and is ready for immediate use The Techne TC‑3000 (models FTC3/02 and FTC3/05) is a compact, robust, and cost-effective PCR thermal cycler, ideal for personal use, educational settings, and basic molecular biology research. Despite its small footprint, it delivers high performance, reproducibility, and flexibility. Key Features Compact and Low Cost One of the smallest and most affordable thermal cyclers on the market. Weighing ~5 kg with a footprint of just 33 × 17 cm, it's perfect for labs with limited space. Available with interchangeable blocks: FTC3/02: 25 × 0.2 mL microtubes FTC3/05: 20 × 0.5 mL microtubes Fast Peltier-Based Cycling Efficient thermal transfer with rapid heating (up to 3.6 °C/s) and cooling (up to 2 °C/s) using advanced Peltier elements. Heated Lid with Selectable Temperature Adjustable from 100–115 °C, the heated lid minimizes condensation and reduces the risk of sample evaporation. It can be enabled or disabled as needed, making it suitable for a range of PCR tubes and strip types. Unparalleled Block Uniformity Delivers consistent results with ±0.1 °C block uniformity at 50 °C, ensuring optimal reproducibility across samples. Wide Temperature Range Dcjdpfx Aoxhfzajdrjn From 4 °C to 99 °C with precision control (±0.1 °C), supporting even demanding PCR protocols.

Condition: used, This listing is for the Hitech Instruments GIR250 Gas Analyser The unit is in full working condition and is ready for immediate use The GIR250 is a bench‑top / transportable analyser designed to measure oxygen (O₂) and carbon dioxide (CO₂) simultaneously in gas samples. It is made by Hitech Instruments (now part of the MTL / Eaton group). Its design emphasizes ease of use, reliability, and low maintenance cost. Other supporting features: The instrument can be programmed with pass/fail criteria for each gas (alarms). It provides analog outputs, typically 4–20 mA, for external logging or control systems. Calibration is designed to be simple (via the front panel keypad) to reduce training burden. The O₂ galvanic cell is user-replaceable (i.e. maintenance can be performed in the field). Mechanical, Electrical & Operational Details Djdpfx Adexhdqtorscn The GIR250 is housed in a rugged, transportable case (lab-style) so it can be used as a benchtop or mobile analyser. Sample inlet and outlet connections use 0.25″ (~6 mm) tubing. The sample system should avoid condensation and contaminants; non‑condensing sample environment is required. Operating ambient temperature: –5 to +40 °C (for non‑condensing conditions) Power / interface: standard for bench‑top analysers (the catalogue doesn’t always detail it, but likely mains or DC supply, suitable for lab use) Typical Applications & Suitability Because it can measure both O₂ and CO₂ in a single unit, the GIR250 is used in applications such as: Respiration / breathing gas analysis / Douglas bag analysis (i.e. in physiological or experimental gas mixture measurement) Fermentation / bioprocess monitoring (where O₂ and CO₂ both matter) Gas mixture / inertisation / process gas quality (checking gas purity, calibrating mixtures) It is not primarily intended for measuring very low trace levels (ppm-level) of O₂ or CO₂ unless its ranges are suitably adapted or specified. The design is more for percent-range analysis

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH stationary stone crushing plants are designed with a focus on high efficiency and durability, offering long-lasting industrial solutions. Each plant is specifically configured based on the hardness and abrasiveness of the material to be crushed and the desired product size. With production capacities ranging from 50 t/h to 1,000 t/h, they perfectly adapt to projects of different scales. The crusher types used in the plants are selected according to material properties to achieve maximum performance. Our design team creates optimized 3D layout plans using feeder, crusher, screen, bunker, washer, and conveyor components. This ensures high capacity, low energy consumption, and minimal maintenance costs throughout the production process. Each plant is custom-designed to suit the investment budget and operating conditions. Our engineering team offers the most suitable projects and proposals to prevent unnecessary expenses. Dcodjxqhzhepfx Adrjn CONSTMACH stationary crushing and screening plants are equipped with high-quality electronic components from SIEMENS and SCHNEIDER, and minimize operator intervention thanks to a PLC-based fully automated system. This provides safe, fast, and stable production. Fixed Stone Crushing Plant Technical Specifications Production Capacity: 50 – 1,000 t/h Type of Material to be Crushed: Varies according to the desired product type Final Product Dimensions: Adjustable upon request Crusher Types: Jaw, impact, cone, or vertical shaft crusher options Why Choose a Fixed Stone Crushing Plant from CONSTMACH? CONSTMACH makes a difference with its engineering approach that offers customized solutions to each customer. Our plants operate continuously for many years thanks to high-quality components, energy-efficient designs, and reliable automation systems. With our after-sales support service that prioritizes customer satisfaction, we are by your side at every stage of your investment. CONSTMACH is the right choice for fixed rock crushing plants offering powerful performance, low operating costs, and maximum efficiency. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 151255, measuring range X-axis: 750 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 250 kg, total height: 3,020 mm, type of input current: AC, total width: 2,092 mm, total length: 2,140 mm, overall weight: 4,500 kg, table width: 900 mm, table height: 860 mm, table length: 1,300 mm, travel speed (max.): 520 mm/min, table load: 250 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, maximum load weight: 250 kg, Equipment: type plate available, For sale is a used ZEISS GageMax 7/5/5 Navigator 3D coordinate measuring machine with serial number 156521 and manufactured in 2011. The machine has a measuring range of 750 × 500 × 500 mm and is designed for workpieces up to 250 kg. It is equipped with a ZEISS VAST XT probe system. The measuring volume also includes a multi-probe changer with various probe holders. Dcodpfx Adez Ebzborsn According to the original auction description, the offered lot includes accessories and computer equipment. The available images show, among other things, a computer, monitor, keyboard, mouse, and other components belonging to the machine. The scope of delivery is based on the images or the components available during inspection. Technical data: Manufacturer: ZEISS Model: GageMax 7/5/5 Navigator Serial number: 156521 Year of manufacture: 2011 Measuring range X/Y/Z: 750 × 500 × 500 mm Maximum workpiece weight: 250 kg Probe system: ZEISS VAST XT Multi-probe changer included Computer equipment included Last documented calibration: 02/2025 The machine is in used condition. A current functional test was carried out by ZEISS. An on-site inspection is possible by arrangement and is expressly welcome. The machine is preferably sold for collection. Loading and transport can be arranged by agreement. Scope of delivery as shown in the images. Subject to prior sale.

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 650 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 650 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Crossbars in orange - New BLT / PR65 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 650 cm x 110 cm, disassembled. - 30 x crossbar approx. 270 x 14 x 5 cm, T30. - 60 x safety pins. - Levels: Floor + 3 Dodoz I Ngqjpfx Adrjcn - 60 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2400,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater Dcjdpfjx Ihg Iox Adrsn UDSA Gas-Fired Warm Air Heater – efficient, even at peak performance The most well-known unit from REZNOR is the UDSA gas-fired warm air heater, which ensures even air distribution in industrial halls. This easy-to-install recirculating air unit is available in 14 performance sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from the outside or from the room, as standard. The UDSA warm air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of units, halls can be heated in a particularly economical way – directly, that is, without central heating – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-Fired Warm Air Heater. The advantages: Efficiency of more than 92% Unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Standard vertical and horizontal air guide vanes Modulation of the heating output up to 50% EC technology ErP Ready These units are direct-fired gas warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas warm air heater, including the gas and exhaust connections, must be carried out by an authorized installation company. These gas warm air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculating air operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation with 1 stage or 2 stages* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day-night-week program - Exhaust gas extraction via roof, version B or C ° - Exhaust gas extraction through the outer wall, version C ° Gas warm air heater type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Maximum nominal heat input (Hs) QN: 30.08 kW Maximum nominal heat input (Hi) QN: 27.75 kW Maximum nominal heat output: 25.53 kW Minimum nominal heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Hommel Dura measuring plate/inspection plate made of natural hard stone (granite plate) Hommel Dura measuring plate made of hard stone (granite plate) Length: 3000 mm Width: 1000 mm Thickness: 300 mm 1 x T-slot No. 2724 Suitable as a measuring plate, inspection plate and precision work surface. You can find more measuring plates in other sizes – new and used – in our shop! Dcsdpfxek Shcue Adren International shipping costs available upon request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater, 54.74 kW, Heating Capacity 5830 m³/h UDSA Gas-Fired Warm Air Heater – Efficient, even at peak loads The most well-known product from REZNOR is the UDSA gas-fired warm air heater, which ensures even air distribution in industrial halls. This easy-to-install unit is available in 14 sizes, ranging from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from the outside or from the room itself. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of units, halls can be heated in a particularly economical way – directly, without a central heating system – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-Fired Warm Air Heater. The advantages: Efficiency of more than 92% Unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Modulation of the heating output up to 50% EC technology ErP Ready These units are directly heated gas-fired warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired warm air heater, including the gas and exhaust connections, must only be carried out by an approved installation company. Dsdowb A Hispfx Adrecn The gas-fired warm air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculation operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage*, controlled via a room thermostat and a heating control switch - Ventilation, controlled via ECOtronic TN - L, with day-night-week program - Exhaust discharge via the roof, version B or C - Exhaust discharge through the outer wall, version C Gas-fired warm air heater type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. rated heat input (Hs) QN: 66.04 kW Max. rated heat input (Hi) QN: 59.50 kW Min. rated heat input (Hs) QN: 33.02 kW Min. rated heat input (Hi) QN: 29.75 kW Max. rated heat output: 54.74 kW Min. rated heat output: 26.92 kW Connection voltage: 230V 1N, 50Hz Air volume flow: 5830 m³/h Protection class: IP20 Pin No. 0461BN0677 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 4,492 h, load capacity: 3,000 kg, lifting height: 4,900 mm, free lift: 1,318 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: TOYOTA 4Y, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 125 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: cushion tires (black), rear tire size: 22 X 10 X 16, overall weight: 9,555 kg, empty load weight: 6,555 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: yellow, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, all wheel drive, cabin, fork extension, front guard, head guard, hydraulic fork positioner, lighting, pallet forks, sideshift, # 🚜 COMBILIFT CB3000 | TRIPLEX 4900 MM | FULLY HEATED CAB | TOYOTA 4Y LPG | FORK POSITIONER | FREE LIFT | READY TO WORK 🔧 FULLY SERVICED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY If you are looking for a forklift that starts generating value from day one instead of creating unexpected service costs, this COMBILIFT CB3000 is an excellent choice. We are offering a 2020 COMBILIFT CB3000, fully inspected, serviced, and prepared for immediate operation. The machine has undergone comprehensive technical inspection and operational testing and is ready for use in manufacturing plants, warehouses, logistics centers, and demanding industrial environments. ## ⭐ KEY ADVANTAGES ✅ Full service completed before delivery 🛡️ Start-up warranty 🛞 Brand new Super Elastic tires ✨ Very good technical and cosmetic condition 🔧 Ready to work with no additional investment required 🎥 Live online machine demonstration available 🚛 Direct delivery to your facility available ## ⚙️ TECHNICAL SPECIFICATIONS Manufacturer: COMBILIFT Model: CB3000 Year of Manufacture: 2020 Load Capacity: 3000 kg Engine: Toyota 4Y LPG Engine Power: 38 kW / 52 HP Operating Hours: 4492 h Mast: Triplex Lift Height: 4900 mm Free Lift: 1318 mm Fork Positioner Width: 1400 mm Cab: Fully heated cab Service Weight: 6555 kg ## 📐 DIMENSIONS Overall Height: 2250 mm including air conditioning Overall Length: 1550 mm Overall Width: 1500 mm Construction Height: 2250 mm ## 🛞 TIRES Front: 16 x 7 x 10 1/2 Super Elastic Rear: 22 x 10 x 16 Super Elastic Condition: 100% brand new ## 🧰 EQUIPMENT 🔹 Hydraulic fork positioner 🔹 Fork sideshift 🔹 Fully heated operator cab 🔹 Full free lift 🔹 Working lights 🔹 Horn 🔹 Front windshield wiper 🔹 Warning beacon ## 🏭 IDEAL FOR 🌲 Timber and wood industry 🏗️ Steel mills and steel service centers 🔩 Structural steel manufacturers 📏 Handling pipes, profiles, and long materials 🏭 Manufacturing and logistics facilities 🌦️ Indoor and outdoor industrial operations ## 🤝 WHY CHOOSE FT LOGISTICS? When you purchase from FT LOGISTICS, you are buying from a company specializing in forklifts, sideloaders, multidirectional forklifts, and warehouse equipment. Every machine undergoes a comprehensive technical inspection, full service, and operational testing before delivery. We have more than 100 machines available from stock and supply equipment to customers throughout Europe, South America, Africa, Asia, and the Middle East. Dsdpfx Adjz Irukerjcn ## 🌍 WE PROVIDE 🔧 Full pre-delivery service 🛡️ Warranty 👨‍🔧 Professional technical support 💶 Leasing and financing solutions 🚛 Worldwide transport arrangements 📄 Export support and customs documentation 🤝 Comprehensive after-sales support Hundreds of customers throughout Europe have trusted our machines and return to us for further purchases. 🎥 Live online demonstration available 📸 Additional photos and videos on request 🚛 Individual transport quotation directly to your facility FT LOGISTICS 🚀 WE DELIVER MACHINES THAT ARE READY TO WORK.

Condition: refurbished (used), Year of construction: 2014, operating hours: 617 h, functionality: fully functional, fuel type: electric, Hako Jonas / Sweepmaster B 980 R Fully reconditioned sweeper with new batteries, new drive wheel, 6-month warranty, and new DGUV V3 inspection including test report. Working width with side broom: 95 cm Main brush width: 70 cm Max. area performance: 5,800 sqm/h Container capacity: 60 L (2 x 30 L) Djdeyalv Aepfx Adrjcn Drive type: Battery Battery V/Ah: (24V) 4 x 6V 240Ah GEL Installed new parts / repairs carried out: - All drive belts replaced - New drive wheel - All bearings replaced - New GEL batteries - New heavy-duty wheels - All rubber strips replaced - New cartridge filter - Sweeping unit drive motor completely overhauled - Drive motor completely overhauled incl. brand new drive wheel - Sweeping unit completely overhauled incl. new main brush and new side broom Additionally, we offer: Service, repairs, and sales for all common Hako models.

Condition: refurbished (used), Year of construction: 2019, operating hours: 1,665 h, working width: 850 mm, area performance: 4,200 m²/h, overall weight: 393 kg, type of input current: DC, input voltage: 24 V, tank capacity: 74 l, water tank capacity: 72 l, battery capacity: 180 Ah, operation weight: 393 kg, Hako Scrubmaster B70 CL Refurbished scrubber-dryer with new batteries, new suction turbine, and much more – includes 6-month warranty and new DGUV V3 electrical inspection with inspection protocol. Working width without squeegee: 85 cm Working width with squeegee: 110 cm Max. area coverage: 4,200 sqm/h Fresh water tank: 72 L Recovery tank: 74 L Drive system: Yes Safety key: Yes Drive type: Electric 24V Battery: 4 x 6V 180 Ah GEL battery New components installed / repairs carried out: - Suction motor 24V 600W new - 4 x 6V 180 Ah GEL batteries new - Brush deck / brush motors overhauled (including new ball bearings, carbon brushes, and bumper strip) Djdpfxeyanhbo Adrocn - All hoses new - Pad brushes new - ACLA rubber wheels new - Squeegee lips new - Fresh water filter new Additionally, we offer: Service, repair, and sales for all common Hako models.

Condition: used, Year of construction: 2026, operating hours: 50 h, functionality: fully functional, machine/vehicle number: YC-3000, Toilet roll rewinding machine Dodpfsz Ih T Aox Adrjcn

Condition: good (used), Year of construction: 2025, Requirements: - Material must be free-flowing (grain size < 18 mm) - Material must be pure, with an ash content of less than 1% ATRO Note regarding: sand, stones, and minerals - Material is compacted by means of compression tongs - Material must be dry, maximum 15% ATRO New: Innovative combination of briquette and pellet Options available at an additional cost: Plant construction / mütek system technology: - mütek shredder MRZ crushing technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary valve airlock - Transport screws - Silos - Control system connections of all kinds - Semi-automatic packaging technology + 24-hour operation possible + Compact design + High energy efficiency thanks to innovative hydraulics + Briquette density of up to ≥ 1 kg/l possible *Details after testing Operating principle: The machine has a silo with an agitator. In each of the 4 corners of the storage silo, there is a vertical screw that compresses the material downwards into the compression chamber. The machine operates with two cylinders, each of which compresses in two directions (either while the cylinder moves forward or backward). This results in 4 briquette outlets, each with 6 individual briquettes. *ideal for the automatic feeding of the heating boiler Format Ø 30 mm Throughput of up to a maximum of 310 kg/h Motor power: approx. 29 kW (total); approx. 30% less in continuous operation Dimensions: 3.1 x 2.3 x 2.2 m Weight: 3.55 tons Your advantages: Compact briquette/pellet format enables the firing of industrial furnaces by means of screw feed Fully automatic 24-hour operation possible High energy efficiency Dcsdpfjfbb Arsx Adrjn Briquettes/pellets with consistently high quality and density For automatic feeding into industrial furnaces Small to medium quantities of wood chips, which are produced in the processing industry of various materials (especially wood, biomass, etc.), can be optimally compressed. The small Ø 30mm format represents an attractive alternative. Unlike our conventional briquettes, these can be automatically fed into industrial furnaces. In addition to wood, various other materials can also be easily processed (various biomass and agar-based materials).

Condition: used, Year of construction: 2002, functionality: limited functionality, machine/vehicle number: AII 265383, overall weight: 460 kg, power: 15 kW (20.39 HP), fuel type: electric, pressure (max.): 8.5 bar, Equipment: type plate available, We are offering this used Atlas Copco GA15 FF reciprocating compressor, manufactured in 2002. Manufacturer: Atlas Copco Model: GA15 FF Year of manufacture: 2002 Condition: used Operating hours cannot be read; the display has a minor defect (see image). Serial number: AII 265383 Dcjdpfx Aoz Ilf Aedrjn Type: screw compressor Max. operating pressure: 8.5 bar Shaft speed: 3000 rpm Rated shaft power: 15 kW Effective delivery rate: 40.8 l/s If you have any questions or require further information, please send us a message or call us.

Condition: new, Elster SM-RI-X-E G1600 Turbine gas meter Elster turbine gas meter SM-RI-X-E-G1600-200-98.5-K (170) Qmax: 2500 m³/h Qmin: 130 m³/h pmax: 89.5 bar No.: 10520813-2014 Pulse transmitter HF2 162,370 pulses/m³ Manufacturer's price: €21,540.00 net You can find more new and used items in our shop! Dodpfx Adjd I Tz Tjrecn International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2012, operating hours: 21,000 h, Screw compressor compressed air tank dryer oil remover location Mülheim an der Ruhr Dcodpfx Adjwr Nnbjren

Condition: used, offer consists of: Dsdpfx Asu Srw Rodrscn creasing machine We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: new, Siemens 6SL3000-0BE34-4AA0 SINAMICS/MICROMASTER PX line filter, E-Version: A, S-C316670, unused in original packaging, 100% functional, scope of delivery as per photos. Dsdpfx Adox Euyvjrecn

Condition: good (used), Technical Data of the Pallet Racking System: Racking System: SLP Technical Data for Assembly: Number of Racking Rows: 01 pc Length per Racking Row: 21,640 mm Number of Bays per Row: 07 pcs Number of Levels incl. Ground Level: 02 pcs Scope of Delivery: 08x Pallet Rack Uprights, used Material finish: Sendzimir galvanized Profile dimensions: C 80 x 50 x 15 x 3.5 Incl. horizontal and diagonal bracing, base plates The uprights are pre-assembled (welded lattice construction) Height: 2,310 mm Depth: 1,100 mm 28x Pallet Rack Beams, used Material finish: grey IPE profile: 100 x 55 mm Connector type: 3-hook (agraf) Clear span: 3,000 mm 56x Safety Pins, used Material finish: Sendzimir galvanized For securing the horizontal beams against unintentional lifting 32x Anchor Bolts, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 16x Shim Plates, used Finish: fully galvanized For leveling rack uprights Dcodpfxexy Hcco Adrjn installed on uneven floors 01x Load Sign Stating bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information regarding the item: This item is available for collection only. Any additional transport or shipping requested for this article will incur extra costs, which can be determined upon request depending on delivery location and scope of supply.

Condition: used, Year of construction: 1982, Cutting height ca. 280 mm cutting width ca. 280 mm Dcedpovwfc Hjfx Adrjn Dimensions (L/W/H) 1500x700x1400 mm

Condition: used, Year of construction: 2012, Control Siemens 840 D weight of the machine ca. 13,5 t dimensions of the machine ca. 7m x 4m x 2,75m m Accessories: Coolant tank Grinding wheels Various spare parts Operating and maintenance instructions CE conformity Dimensions: 7x4x2.75 m ( LxWxH) TECHNICAL DATA: Workpiece data: max. outer diameter: 250 mm Dodpfx Adexh Rqterecn with max. grinding wheels Ø 450 mm max. diameter to be machined over table: 375 mm Profile depth for dressable grinding wheels: 40 mm max. workpiece length: 3,600 mm max. distance between centers (1): 2,800 mm max. bevel angle: +/- 90° Number of teeth of the workpiece: 1 - 999 max. weight of the workpiece: 250 kg Working area: Center distance between workpiece and tool spindle: 355-170 mm Radial travel: 185 mm Axial travel: 3,000 mm Swivel angle: +/- 90°