Used Boge Db 235 Trockner for sale (3,188)

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html Ncodsywtxbspfx Akyer The machine's operating manual is of course still available.

Year of construction: 1987, condition: used, machine/vehicle number: 29990, Volume flow: 300 cm³ Overpressure: 231 bar Max. volume flow at 25 DH/min: 7.5 l/min Inlet overpressure or required air pressure: 7 bar Ncjdpfx Aksbnpc Usyer Air consumption: 9,7 l/DH Weight: 100 kg Space requirement: 1250 x 750 x 1400 mm

Condition: good (used), machine/vehicle number: 5336, carrying power: 6000 kg surface plate measures: 1500 x 1500 mm Njdsgbt Sqopfx Akyecr dumping area: horizontal bis - 145 ° turning speed: 0 - ca. 1 Upm electrical connection: 400 V, ca. 5 kW space needed: 2800 x 2350 x 3250 mm weight: 5000 kg

Year of construction: 2003, condition: ready for operation (used), Built in 2003 Size max 300 x 300 mm min 100 x 100 mm Nsdpedybiisfx Akyscr Speed max 2.100 Pack./h Weight 160 kg (approx.)

Condition: good (used), Various cooking accessories for sale. Detailed specifications and pricing available upon request. Please specify which products you are particularly interested in when making your inquiry. Available items: 1* Material bunker 4* Drying ovens 25* Separators 1* Koch CKT 500 dryer and several more products from other manufacturers, such as Digicolor or Colortronic. See pictures for details. Prices are subject to VAT. Inspection possible by appointment. Contact us; our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own? For more information or contact options, visit our website. Ncsdokzkz Rjpfx Akyor

Condition: ready for operation (used), Air distribution system, Air Center Elmo Rietschle – Used equipment Overall dimensions: Length: 1000 mm Width: 700 mm Height: 2170 mm Electrical data: 400V; 5.5 kW; 2900 RPM Vacuum pumps: Gardner Denver 2x Nsdpfxjw Au Twe Akyjcr Type: SAH 235 Pressure range: +650 to -470 mbar Max airflow: 240 m³/h

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 4,150 h, PELLE SUR CHENILLE Nsdpfx Aoyuvldokyecr HYUNDAI HX 235 LCR ANNÉE 2018 4150 H 2 GODETS 25500 KG LAME GRAISSAGE

Condition: new, Year of construction: 2023, total length: 6,700 mm, total width: 1,500 mm, total height: 2,950 mm, warranty duration: 12 months, overall weight: 2,200 kg, power: 12 kW (16.32 HP), Machine height : ~2.950 mm Machine width : ~1.500 mm Machine width with open doors : ~2.950mm Machine length : ~2.950 mm Table diameter : 1.200 mm Maximum work piece height : 500 mm Maximum table capacity : 500 kg Number of blast wheels : 1 x 7.5kW E-Eco Frequency inverter for turbine : 1 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + TP 4'' Filter : PC2 (1.500m3/h) Total installed power : ~10,5 kW Nedjvr Tbajpfx Akyjcr Application for sandblasting truck rims: YES Application for sandblasting pipes from 1’’(24mm) to 8’’(203mm) :YES This type of machine can be assembled before delivery, it takes just a day to prepare it for work. The machine is in stock. A test of the machine in our premises is possible with prior notice

Year of construction: 2023, operating hours: 4 h, condition: new, machine/vehicle number: 017-2023, Machine height : ~2950mm Machine width : ~1500mm Machine width with open doors : ~2950mm Machine length : ~2950mm Table diameter : 1200mm Maximum work piece height : 500mm Maximum table capacity : 500kg Number of blast wheels : 1 x 7.5kW E-Eco Frequency inverter for turbine : 1 pcs Blasting time : Adjustable Ncsdpfx Akji Dprnsysr PLC : Siemens S7 1200 + TP 4'' Filter : PC2 (1.500m3/h) Total installed power : ~10,5kW This type of machine can be assembled before delivery, it takes just a day to prepare it for work. Machine is on stock.

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1985 Universal dowel drilling machine with swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drill motor 2.2 kW with 21 spindles Spindle pitch: 32 mm with attached oil damper Height adjustment: 80 mm Drilling depth: 80 mm Weight: 420 kg Ncsdpfx Aksyvl Hzeyjr Availability: short notice Location: Röllbach

Condition: used, Year of construction: 1989, with many drills used, top condition Machine cleaned, partially overhauled, lubricated, made operational, test run performed. Make: Hoffmann Type: DB 23 Year of manufacture: 1989 Machine no.: 169 Number of spindles: 23 units Number of boring beams: 1 Spindle pitch / grid: 32 mm Drilling from below, stroke: 60 mm Stop rulers with central adjustment Ncjdpfjvyurcjx Akyer Working width: 704 mm (1080 mm with portal clearance) Drilling depth: 70 mm horizontal Drill holder: M 10 / Taper 30° Space requirement approx. 1300 mm x 1000 mm x 1300 mm Weight: approx. 500 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, without warranty or guarantee.

Condition: used, Year of construction: 1984, Dowel boring machine Year of manufacture: 1984 Njdpfx Aksyulftoyecr Suitable for: Row drilling Cabinets Fittings Frames Standard swiveling device Max. passage: 820 mm Working width: 704 mm 23 drilling spindles; 32 mm spacing; drill attachment with M 10 thread, left and right Max. drill diameter: 40 mm Drilling depth horizontal: 120 mm Vertical: 80 mm Max. clamping height: 92 mm Motor power: 2.2 kW Air consumption at 6 bar approx. 6 l per cycle Weight approx. 340 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), DB5 dowel hole drilling machine & row drilling machine Nodpfxoytvarj Akyscr - 21 drilling spindles - 32mm spindle pitch - 380 volts - 2.2 kW - Dimensions: length 1400mm x depth 900mm x height 1300mm - 2 pcs longitudinal stops

Condition: used, mileage: 202,132 km, power: 320 kW (435.08 HP), first registration: 07/2014, fuel type: diesel, empty load weight: 14,800 kg, maximum load weight: 10,900 kg, overall weight: 40,000 kg, next inspection (TÜV): 08/2025, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, total width: 25,500 mm, operation weight: 25,700 kg, Equipment: air conditioning, crane,

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Nodpfx Aov Hm Nmekyocr Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 2025, Manufacturer: Giovanni Cucchi Nedpfx Akewml Duoyscr Machine type: Automatic short bar loading magazine for single-spindle / short turning Type: DB-EVO70C Design: Surface loading magazine diameter range: 20-70mm The advantages of DB-EVO barfeeders at a glance: - oriented loading of the bar material possible (e.g. edge upwards) - dry running - no oil flow - significantly reduces vibrations even with material that is not optimally straight due to the unique design of the guide channel - very high speeds even with profile material (e.g. hexagon, square, flat material and special profiles) - short remaining pieces, as no clamping sleeve is used - very short charging time (charging process still during machining) - solid construction - very low wear of the guide channel - external loading - therefore no stop for new bars necessary, low power consumption (start/stop function) Please, contact us for getting more information and pictures on mail(at) or *

Condition: new, PILOUS Double miter band saw ARG 235 plus Incl. special accessories: driven chip brush, band tension indicator. Cutting range: Round:90° -45° +45° +60° in mm.235-165-185-115 Square:90°-45°+45° +60° Njdpfjilqh Eex Akyocr in mm.230-145-160-80 Rectangle:90°-45°+45° +60° in mm.280 x 180-185 x 80-185 x 100-115 x 80 Main motor 400 V, 50 Hz, 1.4 kW Pump motor 400 V, 50 Hz, 0.05 kW Saw blade speed 40/80 m/min. saw band length 2710 x 27 x 0,9 mm working height from vice 900 mm Coolant tank approx. 15 l Machine dimensions (min.) 1640 x 750 x 1400 mm Machine dimensions (max.) 1930 x 1610 x 2000 mm Machine weight 295 kg

Condition: excellent (used), Year of construction: 2005, Technical Data: Minimum bending capacity (steel): ø 19.8 x 3.0 mm Maximum bending capacity (steel): ø 76.1 x 3.0 mm Maximum bending capacity (stainless steel): ø 76.1 x 1.65 mm Bending radius: max. 150 mm Bending angle: max. 190° Bending direction: clockwise (right) Maximum tube length: 6000 mm Mobile control panel CE marking Dimensions (L x W x H): approx. 7200 x 2000 x 1650 mm Weight: approx. 3 t Equipment: Torsion device Programmable bending angle Digital travel distance display Nsdpfx Asynt Icekyecr Digital torsion angle display 1 x movable drawer support Collets Condition: Very good condition, lightly used The seller is not liable for any typing or data transmission errors. The machine's appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1996, control type: CNC control, Tube diameter: 4-28 mm Wall thickness: / mm Minimum bending radius: 1.5 x D - 2.0 x D mm Control: Siemens LOGO Delivery rate: 4.5 l/min Nodpfx Aoyqxnajkyocr Max. bending angle +/-: 190° Nominal pressure: 250 bar Operating pressure: 3095 bar Delivery rate: 4.5 l/min Total power requirement: 1.5 kW Drive: Hydraulic cylinder and roller chain

Condition: used, Used machine Equipment and technical data: - Universal dowel drilling machine for horizontal and vertical drilling - Working width 720 mm Ncsdsyq T Iuopfx Akyor - With drilling beam, drive motor 3 HP, 2800 rpm - 23 drilling spindles, drilling pitch 32 mm - Pneumatic workpiece clamping via foot pedal - 2 stop rails 1000 mm - with undercarriage Availability: short-term Storage location: 63934 Röllbach

Condition: good (used), Year of construction: 2010, functionality: fully functional, Worktable size: 316 x 436 mm Nsdpfxjyr Ntpo Akyecr Digital display Travel X, Y: 250 x 350 mm Diameter of electrode: Ø 0.4 mm; Ø 0.5 mm; Ø 1.0 mm; Ø 2.0 mm Z1 stroke: 300 mm Tank capacity: 25 l Machine size: 1060 x 750 x 2100 mm Machine weight: 600 kg

Condition: new, * IMMEDIATELY AVAILABLE * Including tiltable loading platform / supports front and rear / loading ramps Technical Specifications: • Brand: Martz • Model: SMART KARGO 235 • Vehicle Type: Box Trailer • Vehicle Condition: New vehicle • First Registration: Without first registration • TÜV/General inspection: 3 years from first registration • Internal dimensions (LxWxH): 223 x 147 x 146 cm • External dimensions (LxWxH): 340 x 190 x 196 cm • Permissible gross weight: 750 kg • Unladen weight: 439 kg • Payload: 311 kg • Chassis: Low loader (wheels located next to the superstructure) • Tyres: 155/70R13 • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Wooden floor and multiplex panel walls • Reinforced, stable, bolted V-drawbar, foldable • Very robust welded steel frame • Frame fully hot-dip galvanized by immersion bath • 2x handy loading ramps, stowable on the inside of the door while driving • Continuous longitudinal beams • Frame is extremely torsion-resistant due to its robust construction • 4 recessed lashing rings in the floor • Twin-wing rear door with lockable rod lock • 2x manoeuvring handles at the front • Maintenance-free KNOTT rubber suspension axle • Manufacturer’s approval for 100 km/h • 13-pin plug • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog light • Rear lights recessed into rear frame • 2x rear supports • 2x front supports • Jockey wheel fitted Optional Accessories (on request): • Motorcycle wheel chocks • Motorcycle tie-down straps • Lashing straps • Additional lashing eyes • Lashing rails on walls and floor for tie-down straps and blocking bars • Blocking bars • Interior lighting • Reversing light • and much more New vehicle with warranty and TÜV. - Financing or leasing possible - Nationwide delivery possible - All prices incl. VAT - Vehicle registration documents can be dispatched in advance, or export/temporary registration plates can be provided (Germany). - Export plates including customs declaration possible Nodpfx Akex Tiytsyecr Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available immediately from stock! We have been specialised dealers and service workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix. - Subject to errors, prior sale, and amendments -

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), axle configuration: 4x2, gearing type: automatic, Year of construction: 2009, GVW: 1.500 kg Njdpfsx R Txzox Akyjcr Please contact Emal Jaweed for more information

Condition: ready for operation (used), Year of construction: 2005, Bending direction: clockwise, steel tube diameter: 50mm, steel tube thickness: 3mm, stainless steel tube diameter: 50mm, stainless steel tube thickness: 2mm, max. section modulus: 5cm³, bending angle: 180°+10°, max. tube length: 2000mm, max. radius range: 150mm, bending height: 1050mm, bending head length: 850mm, min. bend spacing: 400mm, nominal pressure: 250bar, operating pressure: 200bar. Machine dimensions X/Y/Z: approx. 3200mm/1400mm/1300mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible. Ncodsxwyw Iopfx Akyer

Year of construction: 2010, condition: ready for operation (used), A Silex continuous baking and deep-frying oven is available. Production capacity: approx. 1000 portions/h, processes: frying/baking, output: 20kW, machine dimensions X/Y/Z: approx. 4100mm/1200mm/1700mm, weight: approx. 900kg. Documentation available. On-site inspection is possible. Ncedouzx Uuepfx Akyjr