Used Boldrini Bsa.36 for sale (4,572)

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: Top jaw set 3-piece soft 2 sets -Width: 36 mm -Shipping/Price: complete Dcodpfx Asww Dbmed Njg -Dimensions total: 145/220/H63 mm -Total weight: 12.3 kg

Condition: used, Shelf trolleys, transport trolleys, shelf trolleys, sorting trolleys, mobile shelves, mobile open-fronted storage bins -Storage bin rack: Mobile storage bin rack, double-sided -Storage capacity: 72 storage bins -Dimensions: 690/500/H895 mm -Weight: 24 kg Dedpfxsitapio Ad Necg

Condition: good (used), end mill, end mill, milling cutter Dcodpfeb A Inaox Ad Neg -Outer diameter: 50 mm -Height: 36 mm -Inner diameter: 22 mm -Teeth: 8 -Price/Sale: complete Quantity: 18 pieces -Weight: 5 kg

Condition: used, Diaphragm pump, centrifugal pump, water pump, chemical pump Dcsdsd At Sfspfx Ad Nog -from: scrubbing machine make Gansow -Delivery rate: 8.7 l/min -Number: 1x available -Price: per piece -Dimensions: 180/100/H110 mm -Weight: 1.6 kg

Condition: used, wire electrode, welding wire, welding wire -Cored wire: Fluxofil: 36 -Diameter: 1.6mm -Dimensions: O 300/100 mm Dodpjd N Aptofx Ad Nocg -Weight complete: 15.6 kg

Condition: used, Electric motor, three-phase motor Dcedpjdwa Dfjfx Ad Njg -Voltage: 36V -Speed: 320 rpm -Shaft diameter: 19 x 40 mm -Dimensions: Ø 167/H199 mm -Weight: 16 kg

Condition: used, Hydraulic pump, oil pump, gear pump Djdpfx Aed Erwled Njcg -Power: 0.8 kW 1370 rpm -Protection class: -Dimensions: Ø 154/H485 mm -Weight: 26 kg

Condition: used, fuel type: electric, Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram -Piston: approx. Ø 50 mm Dcjdjd Etd Nspfx Ad Neg -Piston rod: Ø 36 mm -Thread on piston rod: 2x M 27 -Stroke: 160 mm -Dimensions: 695/140/H120 mm -Weight: 17 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 36/4 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: 28 mm -Protection class: IP 44 -Brake: 24 V -Dimensions: 570/310/H280 mm -Weight: 55 kg Dedpfx Ajciq Daed Njcg

Condition: used, Steel holder, clamping plate with T-slot -Holder: 36 - 39 x 18 x 75 mm Dedpfjd I Szfjx Ad Necg -Dimensions: 145/135/H170 mm -Weight: 4 kg

Condition: used, Cardan shaft, cardan shaft, universal joint -Cardan shaft: universal joint, unused -Type / order no .: 21001375 402027/201 7610AVA10 -Shaft: Ø 36 mm -Measurements: see photos -Number: 15x universal joint available Dedohf Dz Eopfx Ad Njcg -Price per piece -Dimensions: 120/62 / H56 mm -Weight: 1.1 kg / pc.

Condition: good (used), gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: Bosch WEG, worm gear motor Djdpsvvtr Hjfx Ad Nocg -Gearbox: Bosch Type FRT 3 842 503 063 -Speed: approx. 36 rpm -Motor: WEG type OD 534 T 0.09 kW -Protection class: IP44 -Shaft: Hexagon 17 x 70 mm -Number: 3x gear motor available -Price: per piece -Dimensions: 270/110/H165 mm -Weight: 4.9 kg/pc.

Condition: excellent (used), Year of construction: 2017, Ref: 11039 . 2017 Rollem 36” Jetslit + 30” Rollaway and Cassette AutoCollator Delivery High volume print finishing system to maximizes finishing productivity for large volume producers For greeting cards, photo books, direct mail, postcards, invoices, business cards, game cards and much more. Features: This flexible system takes full press sheets and converts them to finished products in one step, eliminating the need for guillotine cutting, excess manpower and paper movement. 100% accuracy of finished products is a key feature of the Jetslit. Performs multiple print finishing steps with one system Bi-directional slitting, cutting, creasing and perforating in one machine Ideal for high volume production Multiple-up layouts maximize press sheet Decreases excess labour costs Dcodpfx Adoxyxtto Nsg Eliminates touch points and paper movement Fully integrates with press via DFA communication system Accepts sheets in-line from press or operates in a stand-alone near-line configuration Process: The system takes full printed sheets with multiple images and converts each sheet in two directions, as shown below: 1. Full sheets are fed into the JetSlit registration guide for perfect alignment. 2. The sheets are completely slit on the extreme edges and timed slit in-between with Rollem's patented strike-slit feature. 3. The sheets are turned 90 degrees and re-registered. 4. Final slits are made, removing the notched portions and leaving the final pieces. Specification: Speed: Up to 6,000 cut product sheets per hour Format: Up to 36’’ (915mm)

Condition: excellent (used), Year of construction: 2017, Ref: 11038 . 2017 Rollem 36” Jetslit + 30” Rollaway and Cassette Delivery High volume print finishing system to maximizes finishing productivity for large volume producers For greeting cards, photo books, direct mail, postcards, invoices, business cards, game cards and much more. Features: This flexible system takes full press sheets and converts them to finished products in one step, eliminating the need for guillotine cutting, excess manpower and paper movement. 100% accuracy of finished products is a key feature of the Jetslit. Performs multiple print finishing steps with one system Bi-directional slitting, cutting, creasing and perforating in one machine Ideal for high volume production Multiple-up layouts maximize press sheet Decreases excess labour costs Dsdpfx Aexyxr Nsd Nocg Eliminates touch points and paper movement Fully integrates with press via DFA communication system Accepts sheets in-line from press or operates in a stand-alone near-line configuration Process: The system takes full printed sheets with multiple images and converts each sheet in two directions, as shown below: 1. Full sheets are fed into the JetSlit registration guide for perfect alignment. 2. The sheets are completely slit on the extreme edges and timed slit in-between with Rollem's patented strike-slit feature. 3. The sheets are turned 90 degrees and re-registered. 4. Final slits are made, removing the notched portions and leaving the final pieces. Specification: Speed: Up to 6,000 cut product sheets per hour Format: Up to 36’’ (915mm)

Condition: like new (used), Year of construction: 2005, operating hours: 7,000 h, ONLY PRODUCED FOR 7000HRS Overall Belt width - 660mm Effective Belt width - 610mm Belt length/Tier - 13.28 Effective Belt length - 478.08 Effective Belt area - 245.95m2 Tiers - 36 Tier pitch - 145mm Maximum product height - 73mm Drum Diameter 2905.76mm EVAPORATOR Duty - 210kw Evap Temp - -40c Dsdperfclqjfx Ad Necg Installed power - 32.55kw Infeed Height - 800mm Outfeed Height - 6200mm Infeed/Outfeed Length - 200mm Full CIP covering all areas. Absolutely mint condition. GEA GRASSO PLANT COMPLETE WITH AIR COOLED CONDENSOR 240KW DUTY. AGAIN ONLY 7000HRS RUN TIME REVERSE CYCLE DEFROST AFTER 120HRS WITH WATER SPRAYBARS. More photos available through WhatsApp

Condition: new, PRICE: 1650 EUR Manual dough divider Dsdpfx Aouuc Ahed Nocg Ability to work in any environment Blades made of stainless steel Divide the dough completely, non-sticky Disassembling the desk Dimensions: 370×590×1160mm Dough weight: 30-180 g/pc Capacity: 36 pcs Weight: 125 kg

Year of construction: 2008, condition: good (used), Complete compressor and air station Dodsgw Diaspfx Ad Necg Manufacturer: KAESER Models: AS 36 / TC 31 Year : 2008 Working pressure 7,5 bar

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min MAIN SPEED 40 HP PLUS HIGH SPEED TAABLE EV SERIES MACHINE ELEVATING RAIL SAFETY GAURDING SET OF JAWS FULLY FUNCTIONAL Dodpfx Aexp Na Njd Nocg GOOD SLIDES

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Prang / Alco WT-36-50-2 / ZN 6466 Heat Exchanger / Vacuum Unit Dcjdpfx Adjyahvle Njg Manufacturer: Prang / Alco Model / Type: WT-36-50-2 / ZN 6466 Year of manufacture: 2010 Maximum operating temperature: 200°C Maximum pressure: 10 bar Working capacity: 128 / 438 l Vacuum unit: Steling Type: PLN425YMM Vacuum unit capacity: 18,900 m³/h Device mounted on a steel frame Equipped with primary purification system The Prang / Alco WT-36-50-2 heat exchanger with integrated vacuum unit is designed for advanced technological processes requiring temperature and vacuum control. It can operate at high temperatures up to 200°C and pressures up to 10 bar. The integrated, high-performance Steling vacuum unit ensures stable working conditions and effective gas extraction, improving process efficiency and repeatability. The robust steel frame construction provides durability, safety, and easy integration into existing production lines.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Horizon Auto Creaser including: • Format: Max. 364 x 865 mm/Min. 105 x 180 mm • Sheet weight: 80 to 400 gsm • Coated paper (Gloss, Matte): 105 to 400 gsm • Feeder stack Height: Max. 150 mmor 5.90” Dsdsx N S Nvepfx Ad Njcg • Number of impact crease Lines: Max. 10 Creasing Lines • Production Speed: 5,000 sheets per hour (A4, short-edge feeding, one creasing line)

Condition: good (used), Geared motor, electric motor, three-phase motor -Speed: 36/144 rpm -Power: 2.2/5.5 kW -Type: RF83WD132ML-8-2BS/HL/TF Dcodpeb A I Hpofx Ad Nsg -Brake -Design: B5 -Shaft diameter: Ø 50 mm -Protection class: IP 33 -Number: 2x motors available Price: per piece -Dimensions: -Weight: 160 kg

Condition: good (used), Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, serial hole punch, punching machine, punching press -Box tube punch: 50 x 30 mm -2x quick-change tool holders (for round tubes and rectangular tubes) -with tools round tube punch and rectangular tube punch -Coordinate stop -Protrusion: 155 mm Dsdpfjb A I Hdox Ad Njcg -Quick-change system punching -Side and depth stops -Max. punching capacity: 36 t -Weight: approx. 2000 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 50 mm -Piston rod: 36 mm -Stroke: 580 mm -Total length when retracted: 820 mm -Total length extended: 1400 mm -Piston rod thread -Ideal for building a hydraulic press Djdpfx Adob A Ikxj Nscg - universally applicable -Dimensions: 1040/220/H200 mm -Weight: 30 kg

Condition: used, Technical details: diameter: 300 mm width: 165 mm weight of the machine approx.: 88 kg EMAG Nr. 20012826 X0501 Dodpfx Aeu Nlihod Nocg Merkmale: automatisches spannen Flanschaufnahme Ø 140 x 13mm Durchgangsbohrung 48mm Spannbolzen 3x M16x170mm Pmax: 60bar *

Condition: used, Technical details: feed pressure: 60 bar drive power: 22 kW liter capacity: siehe Typenschild l feed pressure: 50 bar Dcedpfx Adju N Erio Nog drive power: 11 kW 5 hydraulic power units for sale. - 3 units with 60 bar and 22 kW (SA779/24 vane pump type PV2R3-66) - 2 units with 50 bar and 11 kW (SA 780/38) Prices vary according to aggregate size. *