Used Bomag Combination Roller for sale (11,919)

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale The machine is in perfect condition, ready to work. Technical data: Max format: B2+ Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Gksdjztn Erspfx Aixea Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc.

Condition: used, Year of construction: 1987, material width 800 mm material thickness 0,4 - 2,5 mm no. of straightening rolls 8 straightening roll diameter 53 mm number of draw-in rolls 2 diameter of draw-in rolls 160 mm material thickness at 800 mm material width (Niro) 0,6 mm material thickness at 800 mm material width (steel 1,0 mm material thickness at 150 mm material width (Niro) 2,5 mm material cross-cut 975 mm² Gjdpfxjzrpufo Aixoka speed - 35 m/min power requirement 2,1 kW weight 7,0 t dimensions (WxDxH) 2,0 x 2,0 x 2,3 m Straightening machine RM 8-53/160-800 with infinitely varibale drive, motoric driven straightening rolls, supporting rolls, hydraulic lifting of the roller cassette, motorized adjustment of the rolls, hydraulic threading wedge, side guidance at the inlet

Condition: excellent (used), CATALOGUE NUMBER 7967 TECHNICAL DATA - max. width of workpiece: 1100 mm - max. height of workpiece: 170 mm 2 units: 1) metal grooved roller for calibration 2) grooved rubber roller + shoe + metal roller – from above: - slip rubber roller - unit (two units on one motor) 15 kW - slip rubber roller - take-off rubber roller - tape blowing – from below: - 2 slip metal rollers - conveyor belt - 2 slip rubber rollers - pneumatic tape oscillation - grinding thickness potentiometer - electric table lifting + manual (for precise adjustment) - pneumatic brake - 2 feed speed types - working pressure 6-8 bar Godpjzruttjfx Aixska - dust extraction nozzle diameter 2x140 mm - overall dimensions L/W/H 1830x1670x1950 mm - weight 1160 kg ADVANTAGES - Made in Italy - 2 grinding units - Unpainted - Used sander, in perfect condition Net price: 72900 PLN Net price: 17357 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 2018, operating hours: 903 h, Dynapac CC1200 VI roller from 2018 with only 903 operating hours: ----* Manufacturer: Dynapac * Type: CC1200 VI * Year of manufacture: 2018 * Operating hours: approx. 903 * Operating weight: approx. 2,550 kg * Working width: 1.2 meters * Kubota diesel engine * Water sprinkling system * Good condition * Video available upon request (WhatsApp Erik) Gkjdezq Aitjpfx Aixoa * Price: €12,900, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp ?All information is subject to change without notice and does not constitute a guarantee. Errors and prior sale are reserved.?

Condition: new, Catalogue No. S0336 TECHNICAL SPECIFICATIONS - Surface planer table length: 1800 mm - Working width: 410 mm - Working height: 225 mm - Spindle speed: 4500 RPM - Number of knives: 4 pcs - Spindle diameter: 100 mm - Motor power S1: 4/5.6 kW - Voltage: 400 V - Dimensions (L/W/H): 1900/800/1300 mm - Weight: 495 kg Four-knife cutterblock ensures precise machining, High-grade construction and finish, Foldable planer tables to the rear—do not limit thicknesser functionality, Table made of grey cast iron with ground surface, Adjustable thicknessing rollers for optimal workpiece feed, Sturdy tiltable fence adjustable from 90° to 45°, Precisely mounted reversing knife spindle, Thicknesser table with central column guidance and stabilizer, Space-saving side-mounted profile fence. Scope of delivery: – Knives (installed), – Heavy profile fence, – Two rollers in the lower thicknesser table Gkjdpszrk Rnefx Aixea Optional equipment: – Horizontal borer, – Spare knives 410 x 25 x 3.0 mm Net price: 15,700 PLN Net price: 3,710 EUR (based on exchange rate 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Condition: very good, item appears almost unused Roller width: 350 mm Gjdezra Rdspfx Aixeka Height adjustable from 650 mm to 950 mm Price for 3 pieces: 375.-- net

Condition: excellent (used), CATALOG NUMBER: 7081 TECHNICAL SPECIFICATIONS - JOINTER: - Shaft width: 260 mm - Table length: 1190 mm - Cast iron fence, angle adjustable - Adjustable tables - THICKNESSER: - Max workpiece thickness: 110 mm - Thicknesser shaft guard - From above: - Anti-kickback fingers - Toothed feed roller - Planing shaft Gksdpfx Aezhu I Ajixea - Smooth outfeed roller - Extraction port diameter: 85 mm - CIRCULAR SAW: - Max blade diameter: 160 mm - Cutting height: 25 mm - Blade bore diameter: 30 mm - Blade height adjustable (up/down) - Blade guard - Cutting width with fence: 160 mm - Table dimensions: 710 x 420 mm - SPINDLE MOULDER: - Spindle diameter: 30 mm - Spindle height adjustable (up/down) - Spindle height: 110 mm - Max tool diameter: 190 mm - Fence - Motor approx. 2.2 kW - Dimensions (L/W/H): 1200 x 900 x 800 mm - Weight: 325 kg ADVANTAGES - Compact, takes up little space - Very good condition - Used multifunctional machine Net price: 7,900 PLN Net price: 1,880 EUR (based on 4.2 EUR/PLN exchange rate) (Prices are subject to change due to currency fluctuations)

Condition: new, Catalogue number: S 0335 - New machine, in stock - CE certificate SURFACE PLANER: Gjdezh H N Eepfx Aixjka - Working table dimensions: 1500 х 320 mm - Max. planing depth: 5 mm - Aluminium guide fence dimensions: 1100 x 155 mm THICKNESS PLANER: - Working table dimensions: 316 x 600 mm - Max. planing depth: 3 mm - Feed speed: 7 m/min - Material thickness: 4 - 230 mm - Motor power: 3 kW - Cutterhead speed: 5600 min⁻¹ - Dimensions (L/W/H): 1500/600/1050 mm - Weight: 315 kg * Cast iron tables with ground surface * Tables with precise adjustment for longitudinal planing * Stable aluminium fence adjustable from 90° to 45° * Cutterhead guard * Thickness planer table with central guide column and support * Power on/off without stopping the machine * Mortiser with left-hand rotation Net price: 14,500 PLN Net price: 3,440 EUR Price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7554 Technical specifications: - Roller width: 1350 mm - Max. pass-through height: 70 mm - Glue application: single- or double-sided - 2-roller system - Diameter of glue application rollers (top/bottom): 160 mm Gjdpfx Aijzc Nmwsxjka - Main motor: 0.75 kW - Dimensions (L/W/H): 2000x750x1550 mm - Weight: approx. 534 kg ADVANTAGES – German manufacture – Used glue applicator – In very good condition Net price: 13,900 PLN Net price: 3,300 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions Gkjdjt E Nw Topfx Aixoa

Condition: new, functionality: fully functional, spindle bore: 26 mm, turning diameter: 250 mm, turning diameter over top slide: 145 mm, center height: 125 mm, turning length: 750 mm, total length: 1,520 mm, total width: 670 mm, total height: 1,650 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 50 rpm, bed width: 135 mm, type of input current: DC, overall weight: 195 kg, three-jaw chuck diameter: 125 mm, spindle mount: MK 4, Turning and milling combination WMP250BVx750 with brushless motors including a luxury base cabinet LATHE Center distance ----- 750 mm Center height ----- 125 mm Diameter over bed ----- 250 mm Headstock bore ----- 26 mm Headstock spindle mount ----- MK4 Lathe speed ----- 50-2000 continuously variable rpm Motor power ----- 1.1 kW Weight ----- 135 KG Gsdpoga T Emjfx Aixska MILLING UNIT Overhang of milling attachment ----- 170 mm Milling machine speed ----- 50-2250 continuously variable rpm Milling machine spindle mount ----- MK2 Milling head rotatable ----- +/- 90 degrees Travel of milling spindle quill ----- 50 mm Motor power ----- 600W Weight ----- 75 KG

Condition: like new (used), Year of construction: 2026, functionality: fully functional, For sale is a Hammer circular saw-milling machine B3 Winner with a cutting length of 1250 mm. The machine is used as an exhibit in our showroom and is therefore in new condition. Gedozruvbjpfx Aixjka Technical data: - Cutting length 1250mm - Cutting width 800mm - Cutting height 103mm - 4 milling speeds - Height adjustable + swivelable - Dust extraction port Ø 120mm - 2 motors à 3 kW - Year of manufacture 2026 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299 Related terms: circular saw, milling machine, combined machine Reference: R-A0117

Condition: excellent (used), Year of construction: 2007, operating hours: 36,514 h, functionality: fully functional, type of input current: AC, power: 300 kW (407.89 HP), fuel: domestic gas H, type of cooling: water, Equipment: documentation/manual, CHP plant, combined heat and power plant AVESCO CAT TBG-926-24SY with heat pump After the new gas heating system is commissioned in our heating plant in September 2025, the CHP plant will be available. The plant has been regularly and professionally maintained. With 36,514 operating hours, it is in very good condition. The plant can supply 70 apartments with heat and electricity. Gkodpfxszq S Tno Aixea In March 2026, an emissions test was carried out; see the measurement report. If desired, an on-site inspection can be arranged. The dismantling and transport must be taken over by the buyer. The cost estimate prepared by us amounts to approximately 40,000 euros. The location is in CH-8620 Wetzikon ZH.

Year of construction: 2018, condition: used, machine/vehicle number: P18.0003, Rated power: 14.5 kW, speed range: 20-18,000 rpm, tool holder HKS-A63, 30-position tool changer, oscillating machining, controlled NC swivel milling head, machine weight: 2,200 kg, 1 steel drawer cabinet (gray), dimensions (W x H x D): approx. 80 x 120 x 80 cm, 8 drawers, filled with various accessories, 1 workbench, 1 with a sub-mounted steel drawer cabinet on the left, approx. 200 x 70 cm, 6 drawers, with contents. Gsdpfxozqzadj Aixjka

Condition: used, Features: * Used pallet conveyor * Condition: used * Material: steel (galvanized) * Professionally dismantled and packaged * Price per meter Technical data Gksdpfxjgxk Ufo Aixoa Pallet conveyor from the manufacturer Euroroll The system consists of 39 segments Segment length approx. 2,495 mm Stock quantity approx. 97.3 meters Overall width: approx. 950 mm Conveyor width: approx. 855 mm Axle spacing: approx. 155 mm Roller cross-section: 60 mm Material: steel, galvanized Profile: approx. 75/40 mm Up to two braking rollers are available per segment Roller diameter: 80 mm Pallet conveyor Thanks to the excellent workmanship of the pallet conveyor, your material glides smoothly to its destination, even under high load. Tailored solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your needs and the local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or supplementary components such as picking shelves or containers.

Condition: used, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2022, next inspection (TÜV): 11/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2022, Equipment: ABS, GVW: 38,000 kg, Loading area (L W H): 13,620 mm x 2,480 mm x 2,700 mm, Tire size: 385/65 R22.5, Loading area volume: 91 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun protection, Lift axle, Electronic Brake System EBS, Roller shutter door, 1x15 and 2x7 pin connector, Please find an overview of all available vehicles on our website. Do you require financing? We offer individual financing solutions, full-service contracts, and telematics services. We would be happy to provide you with personal advice. Gkedpfx Aioznd Rtsxoa

Condition: new, Year of construction: 2025, functionality: fully functional, conveyor belt length: 2,750 mm, conveyor belt width: 1,600 mm, total length: 2,750 mm, total width: 1,600 mm, total height: 880 mm, overall weight: 350 kg, power: 1.5 kW (2.04 HP), type of input current: three-phase, input voltage: 220 V, input frequency: 50 Hz, motor manufacturer: Zhejiang xingxing motor co. ltd., We offer these new Shenzen Pactoo roller conveyors, manufactured in 2025. Manufacturer: Shenzen Pactoo Model: Conveyors Year of manufacture: 2025 Condition: new Category ID: 365 Gjdpfxjzrmg Se Aixoka Type ID: 3028 Machine type: Roller conveyors If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: used, Length: 4100 mm Width: 930 mm Number of rollers: 6 pieces (5+1) Roller width: 5 x 740 / 1 x 768 Roller diameter: 160 mm Gkedpfxozqf Ave Aixsa Working height: 1000 mm

Condition: as good as new (ex-display), Gravity roller conveyor for pallets and metal boxes (3-lane),4.26 m, Brand new condition (without warranty) Manufacturer / System: ELD Raktártechnika Gedpfxezr Hv Ts Aixjka Type: Gravity roller conveyor / gravity lane 3 item in stock Transportable unit: Pallet, metal box, storage container, and other custom loads Length: 4264 mm (Sections: A2 L=1768 mm + C L=2496 mm) Installation width (EL): 850 mm Usable width (CW): 810 – 812 mm Overall width: 930 mm Roller pitch: 78 mm Conveyor slope: 4% Load capacity (per unit): Minimum 120 kg when using brake rollers Maximum 720 kg (Max. weight ratio 1:4) Finish / Material: Galvanized and painted steel frame (Grey RAL 7005 / Yellow RAL 1021) Features: - Integrated brake rollers (with speed control against load acceleration) - 2 stop elements - Manually released intermediate stop (with yellow operating lever) - Entry guide plates (yellow) and side guide rollers - End stop Operating temperature: 0 – 45 °C (dry warehouse environment)

Condition: used, Year of construction: 2019, operating hours: 3,426 h, Equipment: all wheel drive, Vehicle number 12109 Errors and prior sale excepted. Gkodoy T Uh Nspfx Aixsa

Condition: used, Year of construction: 2016, Transnorm angled inlet outlet rejector infeed conveyor 30°-1040-1080-1050 RA2518 Year of manufacture: 2016 discharge angle: 30° Nominal/external width (NB): 1080 mm Useful width (NUB): 1050 mm Gksdpfjzqa Nksx Aixsa Conveyor speed: 1.0 m/s Roller diameter: 50 mm, steel rolls Drive: SEW Movimot Electrical data: 1,1 kW 50 Hz, 380V center distance: 75 mm Height: 250 mm Straight section: 1040, 2900 to the tip of the angle Optionally available: Supports Length variation Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, 3700mm long, 960mm high, and adjustable Gedpfxev Dauqs Aixska Storage location: Nattheim

Year of construction: 2014, operating hours: 59,436 h, condition: ready for operation (used), functionality: fully functional, Buderus Loganova EN20 CHP unit – 19 kW electrical / 38 kW thermal – Year of manufacture 2014 Gkjdpfxjzd Uhho Aixea For sale is a combined heat and power (CHP) unit from the manufacturer Buderus, type Loganova EN20, from a commercial property in Stuttgart. The unit will be decommissioned as part of an upgrade to the energy supply. Technical data: * Manufacturer: Buderus * Type: Loganova EN20 * Year of manufacture: 2014 * Electrical output: 19 kW * Thermal output: 38 kW * Operating hours: 59,436 h * Start cycles: 6,031 * Maintenance: Premium maintenance contract since commissioning Condition of the unit: The unit starts and runs up properly. Currently, there is a fault in the heat exchanger. According to initial assessment, the heating water pump is defective. The CHP unit is currently out of service. Location & Availability: Location: 70567 Stuttgart Planned decommissioning / dismantling: June–July 2026 Note: Regularly maintained unit with documented service history. Sale due to a unit upgrade. Inspection possible by appointment. If you are interested, we will gladly send you further information and photos.

Condition: good (used), Year of construction: 1994, Roller conveyor, roller track, powered roller conveyor, roller track -Manufacturer: Gubisch, driven roller conveyor type RF 3.0 -Drive motor: Lenze 0.37 kW with variable gearbox -Speed: 10 to 46 m/min -Roller width: 250 mm -Roller diameter: 83 mm -Axle spacing: 130 mm -Conveyor length: approx. 2900 mm -Base: height adjustable -Pneumatic equipment: not functioning Godpfszn Iw Djx Aixjka -Dimensions: 3000/470/H1120 mm -Weight: 281 kg

Condition: ready for operation (used), Year of construction: 1929, functionality: fully functional, machine/vehicle number: Nr. 17575, overall weight: 600 kg, total length: 2,300 mm, total width: 1,400 mm, total height: 2,000 mm, Lithographic press, also known as a scraper press, for manual printing from lithographic stones. Used by artists for lithography, in schools, art academies, and museums. The machine was last used in the workshop of the Gutenberg Museum in Freiburg for demonstrations and workshops. Stone format up to 80 x 130cm. Also very interesting as an exhibit in a lobby, restaurant, etc., or for production. Many squeegees in various widths are included as accessories, as well as 4 different hand rollers with leather coverings for inking the stones. Gsdpfx Ajx A H I Djixska The wooden table needs minor restoration. Lithographic stones in various formats can also be supplied.