Used Buhrs Itm Feeder Section Gathering Machine for sale (66,391)

Condition: used, Year of construction: 2005, Hedelius C60-2500 CNC machining center – spindle running time: 9,546 h Manufacturer: Hedelius Type: C60-2500 Year of manufacture: 2005 Control system: Heidenhain Location: Bremen Technical data: Travel in X: 2,500 mm Travel in Y: 620 mm Travel in Z: 500 mm Table surface area: 3,000 x 600 mm Spindle speed: 8,000 rpm Rapid traverse / feed rate: up to 30,000 mm/min Machine weight: approx. 12,000 kg Operating hours: Hodszc Rlhjpfx Ab Ast Control system ON: 40,045 h Machine ON: 44,393 h Program running time: 10,019 h Spindle running time: 9,546 h Equipment: Heidenhain CNC control system 4th axis: See photos (this was installed on this machine approximately 10 years ago and then stored. None of the current operators know how or if the device works.) Full enclosure Electronic handwheel Coolant system Work area lighting Chip tray The machine is in operation and can be inspected while powered on after prior arrangement. With an X-axis travel of 2,500 mm and a table surface area of 3,000 x 600 mm, the machine is particularly suitable for machining long workpieces in machine, tool, jig, and steel construction. The comparatively low spindle running hours of only 9,546 hours are particularly noteworthy. The Hedelius C60 stands for robust German engineering quality, high precision, and a durable design. Inspection is possible at any time in Bremen by appointment. _____ Subject to prior sale and errors in the technical data. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: used, Year of construction: 2004, operating hours: 31,350 h, Bed milling machine Make: ANAYAK Model: VH Plus 4000 Year of manufacture: 2004 Spindle hours: approx. 31,500 hours Control: Heidenhain 530 Table size: 4200 x 1100 Travel: x: 4000, y: 1200, z: 1500 mm Max. spindle speed: 5000 rpm Max. feed rate: 10000 mm/min Hedpfx Aey Uy Ecsb Ajt Pick-up location: Bremen The machine is in daily use, so operating hours will continue to increase. An inspection can be arranged at any time. Disassembly, loading, etc. are the responsibility of the buyer. A 2-ton forklift and a 5-ton overhead crane are available for "small parts." _____ Subject to prior sale and errors in the technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: used, Year of construction: 2016, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, Coordinate measuring device for simple inspection of components directly on the production floor. Measurement routines can be visually displayed step by step for untrained operators. The device was purchased in 2016 but was used only briefly as it proved unsuitable for the intended application. It is in nearly new condition and comes in its original packaging. Manufacturer: Keyence Model: XM-1000 Year of Manufacture: 2016 Hjdpfx Abszbvqyo Ast Measuring range: 300 x 250 x 150 mm Repeatability: ±3 µm Measurement deviation: ±8 µm Equipment: - XM-1000 measuring system - XM-1500 measurement computer - XM-P1000 measuring probe - Several probe heads / balls - Documentation - Original packaging

Condition: good (used), Year of construction: 1975, functionality: fully functional, total width: 1,900 mm, roll diameter: 1,800 mm, overall weight: 3,100 kg, product width (max.): 1,900 mm, input voltage: 440 V, Slitter rewinder 190 wide DC motors Shaftless input with hydraulic platform to raise the web, the system supports core sizes ranging from 3 inches up to 12 inches and processes of 150 to 1900 mm width webs, output core sizes ranging from 3 to 12 inches  Hsdpfx Abjy Ufkqo Ast

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP Hedpszgu Igefx Ab Ast year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: like new (used), Year of construction: 1993, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 2,000 rpm, For sale: Deckel-Maho FP1 – Heidenhain TNC 123 – ISO 40 – Year of manufacture 1994 Offered for sale: a Deckel-Maho FP1 universal milling machine, manufactured in 1994, equipped with Heidenhain TNC 123 control and ISO 40 tool holder. This is a later model from the last production years of the FP1. The Deckel FP1 is a high-quality German precision and toolmaking milling machine, known for its very solid construction, accuracy and versatility. Due to the combination of the robust FP1 machine construction and the Heidenhain TNC 123, this machine is very suitable for precise milling and drilling work, single-piece production, toolmaking, maintenance and precision mechanical work. Technical data Brand: Deckel-Maho Type: FP1 Year of manufacture: 1994 Control: Heidenhain TNC 123 Tool holder: ISO 40 X-axis travel: approx. 300 mm Y-axis travel: approx. 160 mm Z-axis travel: approx. 340 mm Spindle stroke: approx. 80 mm Spindle speed: approx. 40 – 2,000 rpm Feed: continuously variable Type: universal milling machine Heidenhain TNC 123 The Heidenhain TNC 123 enables accurate positioning and simple operations, and offers significantly more ease of use than a fully conventional model. Hsdpfeywlaksx Ab Ajt The ISO 40 tool holder is robust and allows the use of widely available tools. Due to the 1994 year of manufacture, this is a relatively young and late FP1 model. This makes this machine particularly interesting for those looking for the well-known mechanical quality of Deckel, but also prefer a later model with Heidenhain control. A great opportunity for someone looking for a Deckel-Maho FP1 from 1994 with Heidenhain TNC 123 and ISO 40. Condition: used Location: Emmeloord Asking price: €15,950 excluding VAT Inspection and demonstration are possible by appointment. If you are seriously interested or would like additional information, please contact us.

Condition: used, Year of construction: 2003, Used Machine Year of Manufacture: 2003 Features and Technical Specifications: - Control system with LCD display - Swiveling control panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Joining milling unit 1961: - 2 x 2.0 kW - Diamond jointing cutters in synchronous and counter-rotating operation, Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of roll and strip stock Adhesive application system 1906: - Cartridge system with sensing nozzle - With automatic reloading - PUR adhesives can be used Press Unit 1816: - With driven roller - Pneumatic control of the press unit Trimming Unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling Unit 1942 MOT 2: - For flush, radius, and chamfer milling Hedpfx Abszk Nwwe Aot - Motorized adjustment - Air nozzle on the milling unit Corner Copying Unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius Skiving Unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius skiving blade Surface Skiving Blade 1964: - Insert-controlled surface pulling blade - Air nozzle on the surface pulling blade Buffing unit 1940: - Edge thickness for roll material: 3 mm - Edge thickness for strip material: 5 mm - Max. edge thickness for corner copying: 3 mm - Workpiece thickness: 6–45 mm - Workpiece thickness for corner copying: 45 mm - Min. workpiece length: 180 mm - Feed speed: 8 m/min - Workpiece support spacing: 470 mm - Support plate diameter for edge material: 800 mm - Trimming blade for roll material up to: 3 mm - Warm-up time: 3.5 min - Power of jointing milling unit: 2 x 2 kW - Power of trimming saw: 2 x 0.22 kW - Power of the milling station: 2 x 0.6 kW - Power of the corner copying unit: 0.22 kW - Exhaust port for the jointing milling unit: 120 mm - Exhaust port for the milling unit: 70 mm - Exhaust port for planer unit: 70 mm - Dimensions: 5,350 x 1,669 x 1,940 mm - Weight: 1,200 kg

Condition: used, Year of construction: 1995, Used Machine Year of Manufacture: 1995 Features and Technical Specifications: Hsdpfx Aezlbq Ejb Aet Cost-Effective: - Turbo System: 25% higher system performance thanks to state-of-the-art application technology—while requiring the same amount of floor space! - Shorter cycle times thanks to optimized automatic programming for fast UV systems - Up to 70% cost savings compared to casting and injection molding through the use of solvent-free systems and one-person operation Flexible: - Cost-effective one-person operation with a return cycle function, or optionally in a continuous-flow process for two-person operation - The system is expandable; additional rolling, smoothing, or sanding units can be added Ergonomic: - Easy operation thanks to ergonomic controls Service-friendly: - Thanks to a cleaning circuit and quick-change system Reliable process: - Top-quality surfaces, precisely reproducible Includes: - Roller conveyor, 2000 mm long - ELX 1400 roller conveyor - Bar conveyor, 3000 mm long - UV drying channel with 1 lamp (60/80/120 W) - Working height: 850–950 mm - Rubber-coated application roller: D=238 mm - Chrome-plated metering roller: D=174 mm - Clearance height: 3–120 mm - UV lamp module: 80/120-watt mercury - Power consumption: approx. 21 kW Dimensions: 1300 x 3080 mm

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Hjdozqunhjpfx Ab Aet Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: good (used), Year of construction: 1976, max. wheel diameter 2300 mm Hsdpfx Aozr Rpdjb Ast gear width 1000 mm max. module 22 min. module 1 total power requirement 45 kW weight of the machine ca. 22 t dimensions of the machine ca. 5x3x4 m

Condition: new, work piece width max 145 x 150 mm band speed 1.0 - 8.0 m/min workpiece height max. 100 mm total power requirement ca. 5.5 kW weight of the machine ca. 900 kg. dimensions of the machine ca. 1560 x 870 x 1920 mm Wide-Band Sander for Deburring and Rounding of Laser-Cut Parts - Includes Vacuum Work Table Description Technical Specifications: - Working width: 150 mm - Maximum workpiece height: 100 mm - Max. height adjustment: 100 mm - Complete finishing in a single pass - 1 grinding wheel - 2 disc brushes - Pressure rollers in front of and behind each unit - Adjustable feed speed - Fixed table, constant feed height - Vacuum table - Pressure of the brushes and grinding wheels adjustable . without opening the hood INCLUDED: DD UNIT: GRINDING WHEEL FOR DEBURRING - Working width: 150 mm - Motor power: 1.1 kW - Grinding wheel diameter: 250 mm INCLUDED: 2PTB UNIT: DISC BRUSHES FOR EDGE ROUNDING - Unit for rounding the edges of laser-cut parts - Adjustable speed of the disc brushes - 1 brush rotates clockwise - 1 brush rotates counterclockwise - Brush diameter: 250 mm - Motor power: 2 x 1.1 kW INCLUDED CONVEYOR BELT - The conveyor belt is made of synthetic rubber - The belt has high adhesive strength to hold parts in place Hsdpfx Abezwxy Is Aet - The conveyor belt is oil- and spark-resistant - Transport speed: 1-8 m/min. INCLUDED VACUUM TABLE FOR SECURING SMALL PARTS - Installed as standard - Vacuum motor power: 2.2 kW - Minimum workpiece dimensions: 25 x 25 mm - Maximum workpiece dimensions: 145 x 150 mm GENERAL INFORMATION: - Mechanical measurement of workpiece thickness - Digital display of material thickness - Pressure rollers are spring-mounted - Fixed working height

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, CNC machining center Hedelius MC 40 -1800 Control system: Heidenhain iTNC 530 Year of manufacture: 2006 Internal machine number: 63 Travel distances: X-axis 1,800 mm Y-axis 420 mm Z-axis 480 mm Clamping area: 2 x 1,000 x 420 mm Tool holder: SK 40 Tool magazine: 20 positions Accessories: - High-pressure filter system KM 350 with cooling lubricant system - Handwheel - Chip conveyor Hodpjzw Apmefx Ab Ast - Renishaw RMI prepared - Table probe Renishaw TS27R - Partition - Magnetic clamping plate

Condition: new, Year of construction: 2024, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, working width: 6,400 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, back gauge adjustment: CNC-controlled, back gauge: 1,250 mm, insertion depth: 1,250 mm, working length: 6,400 mm, Equipment: CE marking, cone bending device, documentation/manual, emergency stop, safety light barrier, Latest Generation Sheet Metal Bending Machine: Hsdpfx Abjzxg R Ro Aet - 6400 x 2mm - New Tool Geometry - Sheet width up to 1250mm - New hybrid hydraulic system: Greater speed and efficiency - New Alligator CNC Control - Tapered Back Gauge - Safety Laser

Condition: good (used), *Description:* ZOPF RS 302 three-roller bending machine, manufactured in 1990. German-made. Manual machine mounted on a base for bending round, square, flat, and shaped steel, stainless steel, and aluminum tubes. Mounted on a metal frame with integrated storage. Complete machine with rollers. Ideal for locksmithing, sheet metal work, and guardrail fabrication. *Specifications:* - *Brand / Model*: ZOPF RS 302 9048 L - *Year*: 1990 - *Type*: Manual three-roller bending machine - *Adjustment*: Upper roller adjustable by handwheel - *Mounting*: On a steel base with doors Hedpfezxhh Rsx Ab Aet - *Safety*: Emergency stop - *Equipment*: Set of rollers included *Condition:* Good overall condition. Machine is visible and operational. Video available upon request.

Condition: used, Year of construction: 2011, 5 machines for sale only as a PACKAGE: 1. CNC turning center, 3 units Manufacturer: Traub Type: TNL 26 Year of manufacture: 2011 / 2008 / 2006 Operating hours: 64,154 / 75,849 / 81,823 Control: Mitsubishi TX 8i Equipment: - Main spindle - Counter spindle - Upper turret - driven + Y-axis - Lower turret - driven + Y-axis - Front tool holder - driven + Y-axis - Rear tool holder - Bar feeder 2x FMB / 1x Breuning The machines come from an ongoing production process. 2. CNC lathe, 2 units, one defective Manufacturer: EMCO Type: Turn 332 MC Year of manufacture: 2010 / 2008 Operating hours: unknown Control: Siemens Sinumerik 840D Equipment: - Main spindle - Counter spindle - Upper turret - Lower turret - Bar feeder TOP ETL 8-45 Hjdpfx Ajzxhxvsb Ast One machine comes from an ongoing production process; the other was previously used as a source of spare parts, and several components have been removed. The sale is without clamping devices and tools. Dismantling and loading can be organized by a specialist company for an additional charge.

Condition: used, Year of construction: 2004, total length: 2,900 mm, total width: 900 mm, total height: 1,400 mm, Colour: Grey Empty weight: 1.200 kg - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Drive system: Conventional - Drive: Hydraulic Hodpfx Abszxhygj Aot - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Power [kW]: 3.0 - Max. sheet thickness [mm]: 5 - Max. working width [mm]: 1500 - Top roll diameter [mm]: 140 - Bottom roll diameter [mm]: 140 - Options: Cone rolling, Digital readout, Profile bending attachment - Transport dimensions: 2900mm x 900mm x 1400mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, total width: 600 mm, total length: 900 mm, total height: 2,100 mm, Pie filling machine, brand Anko. Hedpfszxh Rfsx Ab Ast

Condition: used, Year of construction: 1990, weight of the machine ca. 350 kg Hsdpfx Abjzxiabo Aot

Condition: used, Year of construction: 1990, table diameter 360-800 mm automatic feeds ja Hjdpfszxianox Ab Ast weight of the machine ca. 5,7 t

Condition: good (used), > JONES & SHIPMAN 540 AP GRINDER - 1983 - Dual view Hedjzxiwgepfx Ab Ajt > HEIDENHAIN > J&S 540 AP automatic surface grinder, 450x150 magnetic table. > 1983, in good condition, with dual Heidenhain visualization (Z and transverse). > Automatic feeds, coolant system, grinding wheel. Magnetic table. > 400V - 1100kg - Operational, removed from a precision mechanical workshop. > *Specifications:* > - Capacity: 450 x 150 mm magnetic > - Grinding wheel: 200 x 20 x 51 mm > - Longitudinal travel: 500 mm > - Spindle motor: 1.5 kW > - Weight: ~1100 kg > - 400V

Condition: excellent (used), Year of construction: 2015, bore capacity in steel (diameter) 40.0 / 50.0 mm throat 300 mm bore stroke 160 mm turning speeds 200 - 3200 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm engine output 1.8 / 2.9 kW weight 450 kg Current list price: approx. 20.000 euros Special price available upon request Features: - Robust column drill press * Drive: V-belt - VARIO - Automatic spindle feed * with electromagnetic feed clutch * 4 feed speeds: 0.1-0.2-0.3-0.4 mm/U * with electric cross-handle control - swivel work table * 1 station clamping table with 2 T-slots * 1 station with ALZMETALL vise - stepless speed adjustment Hodpszw N Ehefx Ab Aot - Digital speed display - Adjustable drilling depth stop - Pole-reversible drive motor - Clockwise rotation of the drill spindle - Main switch Emergency Stop button - User manual (PDF)

Condition: excellent (used), Working area X: 5,920 mm Working area Y: 1,287 mm Working area Z: 170 mm C, A axes: available Swivel machining: 2 working areas for swivel machining Work table: ATS-HTS-EPS Automatic console positioning system EPS 10 automatically positionable consoles 2 locating pins per console 5-axis milling spindle: Power: 9 kW / 11 kW at 60 Hz Speed: up to 24,000 rpm Tool holder: HSK-F63 Liquid-cooled Drilling head BH 26 16 vertical drilling spindles 4 horizontal drilling spindles in the X direction 2 grooving units for grooves in the X and Y directions Vertical drilling spindles 16, Horizontal drilling spindle X = Tool changer: Chain tool changer with 21 tool positions Clamping systems: Uniclamp clamping system - 6 pieces Control system: BIESSE XP 600 Chip removal: Motorized conveyor belts for the removal of chips and machining waste Vacuum pump BECKER: Motor power 5.5 kW Conveying capacity: 244/286 m³/h Additional equipment: Numerous vacuum suction cups; 6 UNICLAMP clamping systems; Numerous HSK 63 tool holders; 2 large saw blades in the tool magazine Compressed air: 7-7.5 bar Total power: 25.3 kW Weight: 4200 kg Hodpfx Aszxbhweb Ast

Condition: ready for operation (used), Year of construction: 1968, functionality: fully functional, Bickel HK 3/68 Hjdpozxbvzsfx Ab Aot Description This machine, with a working width of 68 cm, is designed for economical use in perforating or grooving operations. The punching process is activated via an electrically controlled clutch that is triggered by a foot pedal. This allows the operator to use both hands to position and align the sheets.

Condition: like new (used), Year of construction: 2022, operating hours: 4,747 h, functionality: fully functional, machine/vehicle number: 329760, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, This machine can still be inspected while powered on at the factory. It has very few operating hours and is in new condition. The original new price was €180,000. Used CNC vertical machining center, Manufacturer: MAZAK Model: VCN 530 C SmoothG Machine number: 329760 Hodpszxcabefx Ab Aet Operating hours: 4747 The tools, fixtures, and vise are not included in the scope of supply. You will find the order confirmation and the machine's specifications in the attachment.

Condition: used, Year of construction: 2007, machine/vehicle number: 5007, Item No. 26241 Hydraulic CNC pipe bending machine Technical data: - Bending capacity, mandrel bending, steel up to Ø 60 x 4 mm - Bending capacity, mandrel bending, stainless steel up to Ø 60 x 2.6 mm - Mandrel bending unit, bending length up to 6000 mm - Max. bending angle 0 - 180° - Overbending +10° - Largest average bending radius 230 mm - Smallest inner bending radius 1.5 x D 34 mm - Automatic pipe feed with controlled rotation unit - Drive 400 V / 7.5 kW - Space requirement approx. W 7500 x H 1200 x D 1300 mm - Weight approx. 1800 kg including: Hjdpfxezxc Ave Ab Aot - Bending angle programming - Digital bending angle display + fine adjustment of bending angle - Various bending tools, approx. Ø 26.9 RM 40 + 54; Ø 26.9 RM 54; - Ø 33.7 RM 67, Ø 42.4 RM 60 + 85, Ø 48.3 RM 96, - Ø 60 RM 120, Ø 40 RM 170, Ø 22 RM 33