Used Ceracon Oven (Vertical) for sale (8,280)

Condition: repair required (used), Year of construction: 1991, operating hours: 40,000 h, functionality: limited functionality, machine/vehicle number: 109-43, travel distance X-axis: 550 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 4,000 m/min, feed rate Y-axis: 4,000 m/min, feed rate Z-axis: 4,000 m/min, nominal power (apparent): 13 kVA, torque: 35 Nm, controller manufacturer: Fanuc OMB, controller model: 9030556, workpiece length (max.): 220 mm, workpiece diameter (max.): 65 mm, total height: 2,600 mm, total length: 2,800 mm, total width: 1,800 mm, table width: 370 mm, table height: 900 mm, table length: 950 mm, table load: 500 kg, overall weight: 2,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, distance table center to spindle nose: 615 mm, number of slots in tool magazine: 12, input voltage: 380 V, Equipment: chip conveyor, rotational speed infinitely variable, Chiron Fz 12 S, year of manufacture 1991. Additional indexing device. Currently with a measurement system error on the B-axis. The machine can be inspected at any time during regular opening hours. Godpfx Asy R Dqhslxsit

Condition: used, Year of construction: 2013, x-travel 500 mm y-travel 400 mm z-travel 330 mm Gsdpfsy Nn Dvsx Alxeit weight of the machine ca. 2100 kg

Condition: used, Year of construction: 2017, machine/vehicle number: 172822005, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, nominal power (apparent): 60 kVA, controller manufacturer: Heidenhain, controller model: TNC530i, rotary table diameter: 500 mm, overall weight: 9,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 6,940 h, coolant supply: 20 bar, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, We are offering this used Microcut 5-axis MCU-5X vertical machining center, year of manufacture 2017. Model: MCU-5X Serial number: 172822005 Power: 60 kVA Frequency: 50 Hz Weight: 9,000 kg Rated voltage: 400 V Number of phases: 3 + PE Rated current at full load: 100 A Short-circuit capacity: 25 kA Gijdpfx Aloykiwlsxjt Maximum load current: 200 A Fuse protection / rated current: 80 A Date of manufacture: May 2017 + Chip conveyor If you have any questions or require further information, feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 222029, power: 115 kW (156.36 HP), input voltage: 400 V, input frequency: 50 Hz, temperature: 525 °C, total length: 2,476 mm, total width: 2,230 mm, total height: 6,871 mm, number of chambers: 1, number of shelf rows: 2, fuel type: electric, Equipment: CE marking, We offer this as new Kocken Ovens Verengloeioven (custom-made) rack oven, year of construction 2024. Gisdpfx Aley I Uq Tjxst If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 735 mm, total width: 890 mm, total height: 595 mm, DGUV certified until: 06/2027, Firebrick floor Lower and upper heat individually adjustable Temperature adjustable from 0 to 450 ° C for 4 + 4 pizza (32 cm) Gijdpsfmcg Sjfx Alxjt 2 baking chambers each 660 x 660 x 140 mm Stainless steel version Connection 400V, 9 kW, 32A-CEE plug Dimensions: 890 x 735 x 595 mm, WxDxH Weight 126 kg New device with warranty Option: Underframe

Condition: used, Year of construction: 2017, control Fanuc - - - - - - - - - - - - - - - - - - Vertical Turning Machine | EMAG - VL 4 with driven tools, equipped with a workpiece conveyor belt, a chip conveyor, and a coolant system The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Gijdpfjy N D Svex Alxst #Tags: VL4 | VL-4

Condition: used, Year of construction: 2017, control Fanuc - - - - - - - - - - - - - - - - - - Vertical Turning Machine | EMAG - VL 4 with driven tools, equipped with a workpiece conveyor belt, a chip conveyor, and a coolant system The machine is in a well-maintained condition. Gisdpfx Alsy N D Spoxjt Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL4 | VL-4

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, functionality: fully functional, power: 8.5 kW (11.56 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 1,380 mm, total width: 1,600 mm, DGUV certified until: 06/2028, warranty duration: 24 months, Equipment: CE marking, documentation/manual, NEW NEW Oven NEW NEW Model Modul 1-1208 Modular deck oven with stone plate for trays 2 x 60x80 / 4x 60x40 LED program control Stainless steel construction Temperature up to max. 350°C Only with us: DGUV V3 inspection Connection: 400V, 32A-CEE plug Dimensions: 1600 x 1380 x 440 mm (W x D x H) NEW unit & SAB tested 24 months warranty + spare parts service Option: Exhaust hood with condenser Mobile base with tray rack Proofing cabinet Giedsttryqspfx Alxet Peel apparatus Manual loader Maintenance contract Training & commissioning Leasing & rental service More ovens in stock!

Condition: used, Technical details: dimensions of saw-band: 5750 mm throat: 605 mm workpiece height: 460 mm max. table load: 250 kg table - inclinable: 15 -30 Grad Gisdpfey Rm T Ejx Alxjt band speed: 27 - 2200 m/min table height: 1125 mm Table dimensions: 740 x 785 mm motor capacity: 5,5 kW machine weight approx.: 1750 kg dimension machine xH: 1,82 x 0,97 x 2,55 m

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 10,000 rpm, spindle speed (max.): 10,000 rpm, Fanuc 2 tables 1100x600 mm Gijdoy Ndlpepfx Alxet 40-tool changer BT40 spindle maximum spindle speed 10,000 rpm 2 chip conveyors

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Spindle nose: 100–700 mm Work table: 1,080 x 580 mm Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Gsdpey Rpa Ijfx Alxeit Max. tool length: 340 mm Machine weight approx. 6.2 t Space requirement approx. 4,790 x 5,330 x 2,905 mm

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Gsdpfxjy Rn H Ts Alxjit Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, table diameter: 4.000 mm Giodpoy N Stbofx Alxot swing diameter: 4.500 mm turning height: 1.600 mm Cross-section of tool slide: 250 x 250 mm power capacity: 1 x 100 kW max. rotational speed: 140 min/1 max. table load: 50 t 2 pieces of tool changers 40 slots per tool changer

Condition: good (used), Year of construction: 2007, travel distance X-axis: 6,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 200 mm, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 - Max. turning diameter over bed: 290 mm - Chuck diameter: 200 mm - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW - Travel: - X-axis: 550 mm - Z-axis: 200 mm - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm Giedpfx Asy Rmzcelxjt - Probe; direct linear measuring system; glass scales on all axes - Heidenhain circulating pickup tape - Machine with feed belt for part loading - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit exchanged.

Condition: used, Year of construction: 1991, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 1991 Control : Siemens 840 Dsl Turning diam. : 1600 mm Turning length : 1800 mm In General: Year of manufacture:1991 / 2010 Control system retrofit:2010 Control system:Siemens 840 Dsl Circumferential diameter:2,000 mm Turning diameter:1,600 mm Turning height:1,800 mm Table / Faceplate: Technology:Gear-driven table Speed:315 rpm Power:105 kW Max. torque:50,000 Nm Faceplate:1,600 mm Max. table load:12,000 kg Tool carrier: Crossbeam travel (vertical):1,200 mm Chisel slide travel:1,500 mm Support travel (horizontal):2,300 (+/-1,150) mm Penetration diameter:340 mm Chisel slide cross-section:240 x 240 mm Equipment: Tool magazine:20 stations Chip removal:Chip conveyor Coolant supply:Coolant system with filter Tool measurement:Probe Set-up:Electronic handwheel Tool holders:Various tool holders Control system overhaul: Year of overhauling:2010 Technology:Siemens 840 Dsl Godpfx Alsy R Iwxsxjit NC control:Sinumerik NCU 710.2 Motors:X/Z-axis, ATC, :spindle Measuring systems:Direct scales X/Z, ROD encoder table Control panels:Machine control panel, ATC operator panel

Condition: good (used), Year of construction: 2015, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: Siemens, x-axis travel 635 mm y-axis travel 510 mm z-axis travel 460 mm Control system SLIMline Siemens Main spindle speed range 20 - 12,000 rpm Main spindle drive power 13 / 9 kW Torque 83 / 57 Nm Tool holder SK 40 Clamping surface of table 790 x 560 mm Number of T-slots 4 + 1 T-slot width 4 x 14H12 / 1 x 14H7 mm T-slot spacing 100 mm Max. table load 600 kg Table height above floor 720 mm Number of tool stations 20 pos. Max. tool diameter 80 mm Max. tool diameter with free adjacent slot 130 mm Max. tool length 300 mm Max. tool weight 6 kg Total tool weight approx. max. 60 kg Feed rate max. 20,000 mm/min Rapid traverse 30 m/min Gsdpfx Ajy Rzbwelxjit Total power requirement 17 kVA Machine weight approx. 4.0 t Space requirement approx. 4.5 x 4.0 x 2.8 m ICS 12 bar Chip conveyor Preparation for 4th axis (rotary table)

Condition: good (used), travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, controller manufacturer: Röders, table width: 700 mm, table length: 900 mm, spindle speed (max.): 36,000 rpm, operating hours of spindle: 100 h, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Precision machining center Röders Tec RP 800 Year of manufacture: 2005 Control: Röders Tec Spindle speed: 35,000 rpm Godpjy Rgalofx Alxoit Spindle has been overhauled – approx. 100 hours run time Drive power: 17 kW Tool holder: HSK 50 Number of magazine slots: 30 Internal coolant supply: 20 bar X-axis: 800 mm Y-axis: 600 mm Z-axis: 400 mm Equipment: Chip conveyor Coolant system 3D probe Electronic handwheel

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 5002, travel distance X-axis: 850 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: FANUC, controller model: Oi-MC, table width: 600 mm, table length: 1,050 mm, table load: 850 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 24, tool diameter: 40 mm, Equipment: chip conveyor, documentation/manual, Tool Standard is BT-40. Giodpfxjx Nctfe Alxot 4th axis: rotary table included;

Condition: used, faceplate diameter 2.400 mm Godpfey N D U Rox Alxoit swing diameter 2.700 mm turning height 2.100 mm output 30 kw In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2002, operating hours: 14,700 h, machine/vehicle number: 15115220514, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D/810D, total height: 2,650 mm, total length: 4,472 mm, total width: 2,780 mm, overall weight: 12,500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 14,700 h, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: documentation/manual, Particularly interesting for export customers: Proper disassembly allows the machine to be loaded onto a standard semi-trailer with approximately 2.45 m loading width. Our disassembly team can prepare and load the machine accordingly. As a result, transport costs can be significantly reduced compared to a special transport. Technical Data Manufacturer: DECKEL MAHO Model: DMF 220 linear Year of manufacture: 2002 Machine No.: 15115220514 Control: Siemens SINUMERIK 840D/810D Operator interface: ShopMill ShopMill version: 06.02.04 PLC version: 06.03.06 Tool holder: SK 40 Working spindle: up to 12,000 rpm Tool magazine: 30 stations Table size: 2,600 × 600 mm Max. table load: 2,200 kg Travel paths: X 2,200 mm / Y 560 mm / Z 720 mm Feed rate: up to 20,000 mm/min Rapid traverse X: 18,000 mm/min Rapid traverse Y/Z: 15,000 mm/min Machine weight: approx. 12,500 kg Transport weight: approx. 14,000 kg Max. installation weight: approx. 16,000 kg Electrical Data Connected load: 50 kVA Max. current consumption: 60 A Main fuse: 80 A Gisdpfsy Nn Eyox Alxet Power supply: 400 V / 50 Hz Control voltage: 24 V Supply voltage: 230 V Electrical diagram available Equipment / Special Features Siemens SINUMERIK 840D/810D ShopMill operator interface SK40 tool holder 30-station tool magazine Large X-axis with 2,200 mm travel Rigid table design Documentation / technical documents available Electrical diagram available Machine under power Year of manufacture: 2002 Made in Germany Transport optimization possible through disassembly Loading onto standard semi-trailer possible Considerably lower transport costs compared to wide-load/special transport

Condition: used, Year of construction: 2021, x-travel 1270 mm y-travel 660 mm z-travel 610 mm Gsdpfoy Nfabsx Alxjit weight of the machine ca. 8680 kg

Condition: used, Year of construction: 2013, x-travel 400 mm Gisdpoy Nd U Refx Alxot y-travel 400 mm z-travel 375 mm weight of the machine ca. 7150 kg

Condition: used, Year of construction: 1998, total length: 4,850 mm, total width: 1,300 mm, total height: 2,230 mm, Colour: White Weight: 750 kg - Year: 1998 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 819061 - Max. cutting height vertical [mm]: 1850 - Max. cutting width [mm]: 4150 - Max. cutting depth [mm]: 55 - Max. saw blade diameter [mm]: 250 - Vertical cutting: Yes - Voltage [V]: 400 - Current consumption [A]: 6 Godjy Nczvjpfx Alxoit - Fuse [A]: 16 - Power [kW]: 2.2 - Transport dimensions: 4850mm x 1300mm x 2230mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1996, machine/vehicle number: VKD5000G, power: 180 kW (244.73 HP), temperature: 1,120 °C, inner dimension length: 5,000 mm, inner dimension width: 550 mm, inner dimension height: 130 mm, number of chambers: 3, year of last overhaul: 2025, We offer a used WMU VKD5000G protective gas conveyor furnace (continuous belt furnace), year of manufacture 1996. The system is ideally suited for soldering and annealing stainless steel components. Technical data: Heated length: 5000 mm Number of heating zones: 3 Gijdjy Nyqzopfx Alxst Operating temperature: up to 1120 °C Usable width: 550 mm Usable height: 130 mm Heating power: 180 kW Protective gas: Hydrogen / Nitrogen The furnace was relined in 2025 and is equipped with an almost as-new furnace muffle. If you have any questions or require further information, please do not hesitate to contact us by phone or email at any time.

Condition: like new (used), Year of construction: 2020, operating hours: 16,785 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, CNC Machining Center Manufacturer: Fehlmann, Model: Picomax 95 Year of manufacture: 2020 Technical Data Make: Fehlmann Model: Picomax 95 Year: 2020 Operating hours: 16,785 total / 7,181 spindle hours Spindle speed: 50 – 18,000 rpm Spindle power: 25.2 kW Max. torque: 120 Nm at 50–2,010 rpm Control: Heidenhain TNC 640 X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 610 mm Machine table: 1,600 x 550 mm, 10 slots, 12H8, 50 mm spacing XYZ positioning accuracy (ISO 230-2): A = 0.005 mm / R = 0.003 mm Electrical connection: 400 V 3P+N+E / 50 Hz / 63 A (T) Standard Equipment - Feed rate range: 1 – 30,000 mm/min (standard) - Automatic tool changer, operator side, main time parallel loading incl. Fehlmann extended tool management on TNC 640 - Direct linear measurement system with pressurized air in XYZ - Pressurized air cleaning with activated carbon filter - Coolant system with chip drawer and fine-chip filter insert, coolant spray gun, chip flushing, machine shutdown via M function - Cooled motor spindle and Y-axis drive - Spindle and thermal expansion compensation - Graphical machine diagnostics system via softkey - Drawer block, lower right - Interfaces: RJ45, USB, RS232 - 48-position chain magazine HSK-A63, double-gripper tool changer. Magazine accessible operator side, parallel to machining - Electronic handwheel HR 510 for TNC 640 - Active cooling system for motor spindle and Y-axis drive - Work area enclosure with polycarbonate safety windows; powder-coated; large-opening stainless steel sliding door at front/top for crane loading - Left side door with lockable polycarbonate windows - Chip flushing via machine bed - FEHLMANN cycle package Special Equipment - Automatic length compensation of the milling spindle via direct measuring system - Tool clamping system HSK-A63 - Leakage sensor to monitor coolant supply through spindle - Automatic right-side enclosure door for PICOMAX 95 - ProfiNet robot interface to PICOMAX as per Fehlmann interface description for customer-specific robot integration - Coolant system 700 l, BF/HD80, with through-spindle cooling, 80 bar, and chip conveyor - Emulsion and oil mist extractor system for work area; programmable operation via M function: on, off, intermittent - 3D probing system Blum TC52LF incl. spindle adapter HSK-A63 - LaserControl Blum LC50-DIGILOG for tool measurement and monitoring D 0.02 – 120 mm - Reference tool HSK-A63, Ø 8 mm - FEHLMANN 5-axis cycle package Automatic Indexing & Swivel Unit ATS 200 D - with Schunk TANDEM center vise KSP100 Automation – Unirobot pro Unirobot M-20iA-10P pro Robot: Fanuc 6-axis industrial robot - Manipulator: FANUC M-20iA - Max. payload: 20 kg - Teach pendant Safety fence system uniprotect Drawer system incl. workpiece carrier ALB - 10 pneumatic drawers with workpiece carriers (400 x 600 mm) FMB quick-change head Workpiece detection via light barrier Profinet interface Gijdpfjy Ny A Dox Alxst Robot cell incl. program creation - Double gripper system Gripper modules: SCHUNK JGP 100-1 Max. workpiece weight: 3.3 kg All information subject to change. A demonstration is possible at any time in our showroom.