Used Clamping Plate 5600 X 1875 X 400 Mm for sale (99,358)

Condition: new, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 7,500 mm Number of bays per racking row: 03 units, each 2,400 mm Number of levels including base level: 02 units Included in the scope of delivery: 04x Pallet racking uprights, new Material color: Sendzimir galvanized Material color of base plates: RAL 5010 Enzian Blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Incl. cross and diagonal bracing, Base plates The uprights are delivered unassembled (bolted frame) 2,350 mm high 800 mm deep Note: The racking uprights are delivered unassembled. We can pre-assemble the racking uprights for an additional charge of €17.50 plus 19% VAT. 12x Pallet racking crossbeams, new Material color: RAL 7035 light grey Box profile: 80 x 40 mm Crossbeam type: TRV1-240-084-30CE Agraffe: 5 hooks Clear width: 2,400 mm Max. load per pair of crossbeams: 1,600 kg, with evenly distributed load 06x Chipboard, 2nd choice, used Thickness: 22 mm Dimensions: 2,380 x 800 mm Surface: possibly coated (possibly in two parts) 48x Z-brackets for locking/inserting chipboard, surface galvanized Suitable for chipboard flooring from 22 - 38mm, can be rotated and inserted on both sides For a width of 40 mm 24x Locking pins, new Design: fully galvanized For securing the longitudinal beams to prevent accidental lifting 16x Bolt anchors, new Bsdpskr Uzbefx Aphjdf Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 08x Shims, new Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load signs with information on bay and frame loads, manufacturer and batch number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Technical data of the pallet racking system: Racking system: Hovuma Technical data of the installation: Number of racking rows: 01 pcs. Shelf length: approx. 17.600 mm Number of bays / shelf row: 07 pcs á 2.400 mm Number of levels plus floor level: 03 pcs. Included in delivery: 08x pallet rack uprights, used Material color: green upright profile: C 100 x 50 x 3 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled ( welded truss ) 3.650 mm high 870 mm deep incl. load distribution plate, used total length: approx. 930 mm inside width: approx. 102 mm 42x pallet rack beams, second-hand material color: green INP profile: 80 x 42 mm clear width: 2.400 mm max. load per truss pair 2.400 kg with evenly distributed load 84x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out 32x heavy duty dowels, new Manufacturer: MKT Execution: galvanized steel Approved for: non-cracked concrete through hole mounting: M 12-13/95 16x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, Bdodjmxlnispfx Aphsf manufacturer and commission number Dimension: 80 x 220 mm

Condition: new, Technical specifications for the pallet racking system: Racking system: SSI Schäfer Bsdpfxsktbp Ds Aphjdf Type: PR 600 Technical specifications for installation: Number of racking bays: 01 unit Length per racking bay: approx. 9,975 mm Number of bays per racking bay: 04 units, each 2,400 mm Number of levels including the base level: 02 units Included in the scope of supply: 05x Pallet racking uprights, new Material color: Sendzimir galvanized Material color of base plates: RAL 5010 Enzian Blue Upright type: P73 Upright profile: 75 x 75 x 2.0 mm Includes cross and diagonal braces, Base plates The uprights are delivered unassembled (bolted frame) 2,350 mm high 800 mm deep Note: The racking uprights are delivered unassembled. We can pre-assemble the racking uprights for an additional charge of €17.50 plus 19% VAT. 16x Pallet racking beams, new Material color: RAL 7035 light gray Box profile: 80 x 40 mm Beam type: TRV1-240-084-30CE Agraffe: 5 hooks Clear width: 2,400 mm Max. load per beam pair: 1,600 kg, with evenly distributed load 32x Locking pins, new Design: fully galvanized For securing the longitudinal supports against unintentional lifting 20x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 10x Shims, new Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load signs with information on bay and shelf loads, manufacturer, and batch number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any further desired transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location and scope.

Condition: new, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 2,550 mm Number of bays per racking row: 01 unit, each 2,400 mm Number of levels plus base level: 02 units Included in the scope of delivery: 02x Pallet racking uprights, new Material color: Sendzimir galvanized Material color of base plates: RAL 5010 Enzian blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Incl. cross and diagonal braces, Base plates The uprights are delivered unassembled (bolted frame) 2,350 mm high 800 mm deep Note: The racking uprights are delivered unassembled. We can assemble the racking uprights for you for an additional charge of €17.50 plus 19% VAT. Bodpfx Aekr Ux Sophodf 04x Pallet racking beams, new Material color: RAL 7035 light grey Box profile: 80 x 40 mm Beam type: TRV1-240-084-30CE Agraffe: 5 hooks Clear span: 2,400 mm Max. load per beam pair: 1,600 kg, with evenly distributed load 02x Chipboard II grade, used Thickness: 22 mm Dimensions: 2,380 x 800 mm Surface: possibly coated (possibly in two parts) 16x Z-brackets for locking / inserting chipboard, surface galvanized Suitable for chipboard flooring of 22 - 38mm, can be rotated and inserted on both sides For width 40 mm 08x Locking pins, new Design: fully galvanized For securing the longitudinal beams against unintentional lifting out 08x Bolt anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 04x Shims, new Design: fully galvanized To level the racking uprights that are installed on uneven ground 01x Load signs with information on bay and shelf loads, manufacturer and batch number Dimension: 297 x 210 x 2 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any further desired transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Scope of delivery includes: 01x stacking box, used External dimensions: 400 x 300 x 120 mm Internal dimensions: 360 x 260 x 117 mm Colour: similar to anthracite grey Bsdsw E Ixrjpfx Aphedf Weight: 0.62 kg per unit Notes: The material is food-safe and made of polypropylene (PP). General information about the item: This item is only offered for collection. Delivery or shipment of this item will incur additional costs, which can be quoted separately depending on the place of delivery and the scope of delivery.

Condition: good (used), Technical Specifications for the Pallet Racking System: Racking System: SLP Installation Specifications: Number of Racking Aisles: 01 pc. Length per Aisle: 15,480 mm Number of Bays per Aisle: 05 pcs. Number of Levels incl. Ground Level: 03 pcs. Scope of Delivery Includes: 06x Pallet Rack Uprights, used Material finish: sendzimir galvanized Profile dimensions: C 80 x 50 x 15 x 3.5 mm Incl. horizontal and diagonal bracing, base plates Uprights are pre-assembled (welded framework) Height: 5,400 mm Depth: 1,100 mm 30x Pallet Rack Beams, used Material finish: grey IPE profile: 100 x 55 mm Connector: 3 HK (hooks) Clear span: 3,000 mm 60x Safety Pins, used Material finish: sendzimir galvanized For securing beams against unintentional removal 24x Anchor Bolts, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 12x Shim Plates, used Finish: completely galvanized For leveling upright frames that are installed on uneven floors 01x Load Capacity Sign with details on bay and shelf loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any transport or shipping Bdjdpfxjxyf Rfs Aphsf required beyond this is subject to additional costs, which can be quoted separately depending on delivery location and scope.

Condition: new, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of racking rows: 1 unit Length per racking row: approx. 5,025 mm Number of bays per racking row: 02 units, each 2,400 mm Number of levels including base level: 04 units Included in the scope of delivery: 03x Pallet racking uprights, new Material color: Sendzimir galvanized Material color of base plates: RAL 5010 Enzian Blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Includes cross and diagonal braces, Base plates The uprights are delivered unassembled (bolted framework) 2,350 mm high 800 mm deep Note: The racking uprights are delivered unassembled. We can assemble the racking uprights for an additional charge of €17.50 plus 19% VAT. 16x Pallet racking beams, new Material color: RAL 7035 light gray Box profile: 80 x 40 mm Beam type: ASM50-CES80|40|1.5 Design: Step beam Agraffe: 5 hooks Clear width: 2,400 mm Max. load per beam pair: 1,600 kg, with evenly distributed load 08x Chipboard II grade, used Thickness: 22 mm Dimensions: 2,380 x 710 mm Surface: possibly coated (possibly in two parts) 32x Locking pins, new Design: fully galvanized For securing the longitudinal beams against unintentional lifting 12x Bolt anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 06x Shims, new Design: fully galvanized Bdsdjkti Sxopfx Aphof For leveling the racking uprights that are installed on uneven ground 01x Load signs with information on bay and shelf loads, manufacturer and batch number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 1990, -1- used drive roller/deflection roller, drum length approx. 750 mm, drum diameter approx. 400 mm, with 20 kW Stiebel (5042.04.00301.05) gearbox, year not known to us. Price EXW Bjdpfx Apewqfzhohedf

Condition: excellent (used), Year of construction: 2007, Technical specifications: Max. cutting width: 4050 mm Max. cutting capacity for steel (ST40): 8.0 mm Max. cutting capacity for stainless steel: 6.0 mm Bodpfx Apsywd Ndjhedf Max. cutting capacity for aluminium: 8.0 mm Motorized adjustable backgauge: 1000 mm Cutting gap adjustment Cutting angle adjustment: 2.2° Sheet support device Motor power: 15 kW Dimensions (L x W x H): approx. 4800 x 2200 x 2150 mm Weight: approx. 11.5 tons The seller is not liable for typographical or data transmission errors. The machine is in condition, technically and visually, corresponding to its age; used machines are sold without any warranty.

Condition: like new (used), Automatic pressing line (short cycle), useful to apply veneer, paper or laminates, composed of: V03022) Loader (Portal) "SAG" Double-station (of pick-up) with central motorized rollers table V03023) Brushing machine (to top and bottom clean the panels) "POLIMA"  Bdedpfedun Nijx Aphsf V03024) Glue Spreader "OMMA" V03025) Motorized Conveyoring Disks way "OMMA" V03026) Preparing table for the panels and motorized in-feed carpet to the press "SIMI" V03027) Short cycle hot hydraulic Press "SIMI IMPIANTI" mm 1400 x 4500, with No. 10 pressing cylinders V03028) Unloader-stacker (Portal) "SAG" Double-station (of storage) with central motorized rollers table

Condition: new, plate width 2000 mm plate depth 4000 mm plate height 300 mm weight 5195 kg Clamping plates - T-slot plates - plate field 4000 x 2000 x 260 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this we can a custom made panel for you. edge distance: 240mm groove spacing: 230mm Groove size: 22mm Bjdpfx Ajyq S Exophedf Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III The cover picture is for orientation only and does not represent a true-to- scale image of the plate.

Condition: new, plate depth 4000 mm plate width 2000 mm plate height 600 mm weight 6700 kg GERD WOLFF clamping cube 4000 x 2000 x 600 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slot size: 52 x 28 T-slot spacing: 500 Number of grooves: 8 x 8 Edge distance: 250 Weight: 6700 kg Casting quality HT250 Flatness less than 0.12 mm Bedoymf I Eepfx Aphedf Surface machined according to DIN 876/II Keywords: Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Mounting cube, Fixing cube, Clamping block

Condition: new, weight max. in kg 500 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4215 mm swivelling range 270 Grad Total weight, approx. 550 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 Bdjdpfxjxak H Eo Aphjf - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Bsdpfexak D Rsx Aphjdf Fig. Shows a similar crane system

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Bodoxak Hxjpfx Aphjdf Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: used, Year of construction: 1979, grinding diameter 630 mm grinding length 4000 mm centre height / mm weight of the machine ca. 32000 kg Bdedevm Dzaspfx Aphef Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. Grinding Dimensions: 630 x 4000 mm Weight: 32,000 KG HS-Code: 84602910 Discover precision machining with the STANKO 3M194, equipped with a spacious grinding area of 630 x 4000 mm. Weighing at 32,000 KG, this robust machine ensures stability and reliability in your machining processes. Classified under HS-Code 84602910, it meets international standards for quality and performance. The 3M194 not only offers impressive dimensions but also incorporates innovative technology, ensuring top-notch results. With its reliable design and precise performance, this cylindrical grinding machine is ideal for processing a variety of workpieces. The precise control and versatility of the STANKO 3M194 make it the perfect choice for companies striving for the highest quality standards in metal machining. Trust in the proven technology of STANKO to optimize your manufacturing processes and achieve superior results. Invest in the future of your production with the STANKO Cylindrical Grinding Machine 3M194 - the perfect combination of performance, precision, and reliability. Contact us today to learn more about this outstanding grinding machine and how it can meet your manufacturing requirements.

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Bdjdpfx Aped Ab Uuehsf Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: good (used), Year of construction: 1956, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe Bjdpfoh Uuzyjx Aphodf -Manufacturer: Meuser, lead screw and feed screw lathe type M3A -Turning length: 1400 mm -Turning diameter over bed: 550 mm -Turning diameter without bed: 800 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools (see photos) -Tailstock mount: MK5 -Dimensions: 2770/1160/H1310 mm

Condition: excellent (used), Metal band saw blade, band saw blade -unused: original packaging -Number: 6x sheets available -Price: per piece -Toothing: 4/6 -Dimensions: 4400 x 34 x 1.1 mm Bdedpfx Apsb A Inwohef

Condition: new, 10,000 m² of flooring – stage flooring – chipboard 2,400 x 1,110 x 38 mm, new goods 🧰 Product features • Material: Wood • Color: see images • Condition: New • Dimensions: 2,400 x 1,110 x 38 mm • Weight: approx. 71 kg 💰 Price per sheet: €67,- net, excluding VAT • Quantity discounts: available upon request • Shipping costs: available upon request, throughout Europe Bdsdpfx Apeyn Ew Nohjf • Delivery time: immediately available • Inspection and collection: possible at any time by appointment Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of warehouse platforms & steel structures immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-inclusive package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including complete clearance. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: Cataloging, office preparation, inspection, goods handover, logistics, dismantling and handover in broom-clean condition. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, position of the milling head: 2.5 x 2.5 °, mount diameter: 50 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, total width: 50,000 mm, total height: 48,750 mm, total length: 212,400 mm, table length: 12,000 mm, table width: 1,650 mm, power: 0.03 kW (0.04 HP), overall weight: 50,000 kg, X-axis: 10300mm Y-axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 1650mm Table load: 50000 Power on spindle: 22/30kW Spindle speeds: 60-3000Rpm Bdederx Rtrjpfx Aphsf Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21240mm Width: 5000mm Height: 4875mm Weight: 50000kg

Condition: good (used), Year of construction: 2004, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 600 mm, CNC portal milling machine FPT - STINGER MACH-ID 8829 Manufacturer: FPT Type: STINGER Control: HeidenHain iTNC530 Year of manufacture: 2004 Chip conveyor Laser tool setter Portal Handwheel Full A/B-Automatic head High pressure coolant Specifications Metric US Standard X - axis 1750 mm Y - axis 1400 mm Bdedouni D Ejpfx Aphof Z - axis 600 mm Table length 1200 mm Table width 1000 mm Table load 5000 Feed X - axis 35000 mm/min. Y-axis feed 35000 mm/min. Feed Z-axis 35000 mm/min. Tool holder HSK 63 ISO/Bt/Mk Spindle power 25 kW spindle speed 18000 rpm Tool changer 30 IKZ 20 Number of controlled axes 5 Chip conveyor Yes Cooling device Yes Dimensions (estimate) length 6000 mm width 4000 mm height 3850 mm weight 21000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Bsdpfx Aorx Rxtophjdf Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: good (used), Year of construction: 1993, total length: 1,400 mm, total width: 795 mm, total height: 920 mm, Manufacturer: ASQUITH Type: TB-1400 Year of manufacture: 1993 3 matching pieces Weight 2300 kg each Taper fabricated construction Specifications Bjdpswpvd Rjfx Aphjdf Metric US Standard Number of T slots 5 Up and 5 Down Pitch from T to T 260 mm T-slot dimension 28 mm Number of T-slotted sides 2 Dimensions (Estimate) Length 1400 mm Width 795 mm Height 920 mm Weight 2300 kg Please note: The information on this page was obtained by us to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but the accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend you check all important details.

Condition: excellent (used), Year of construction: 2010, travel distance X-axis: 14,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, spindle speed (max.): 5,000 rpm, rotational speed (max.): 5,000 rpm, total width: 5,000 mm, total height: 4,900 mm, total length: 22,000 mm, table length: 14,000 mm, table width: 2,000 mm, table load: 50,000 kg, FP model, ideal for a wide range of applications involving medium to large-sized components. Floor-type milling and boring machine - High dynamics with traverse speeds up to 35 m/min - INA linear guideway system - Hydro-mechanical clamping slides - Orthogonal milling head enables machining at any desired angle Technical data: - X-axis travel: 14,000 mm - Y-axis travel: 2,600 mm - Z-axis travel: 1,500 mm - Table length: 14,000 mm - Table width: 2,000 mm Bjdpfevn S E Nsx Aphedf - Table load capacity: 50,000 kg - Spindle power: 43 kW - Spindle speeds: up to 5,000 rpm - Spindle taper: ISO 50 / BT / MK - X-axis feed rate: 35,000 mm/min - Y-axis feed rate: 35,000 mm/min - Z-axis feed rate: 35,000 mm/min - Automatic orthogonal milling head positioning: 1° increments - Operating hours: 3,500 h - Machine length: 22,000 mm - Machine width: 5,000 mm - Machine height: 4,900 mm - Machine weight: 31,000 kg