Used Compact Loader Mini Loader Ysrt14 for sale (9,555)

Condition: used, maximum load weight: 34,030 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2026, total width: 2,480 mm, Equipment: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specification available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick loading surface, hydraulically liftable and lowerable loading area behind the gooseneck, approx. 2,800 mm long, with rear bevel approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm) over the axles, checker plate covering Two-part steel ramps: * One pair galvanized two-part steel ramps, reinforced design, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 8 t on an area of appr. 20 x 20 cm) * Ramps with hydraulically extendable and retractable sections and hydraulic lifting device, maximum load per pair: 40,000 kg * In accordance with regulation 1230/2012/EU, ramps with a length less than 300 mm in driving position do not have to be included in the total vehicle length of 16,500 mm Landing gear: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) * Tires 235/75 R 17.5 3PMSF * TPMS tire pressure monitoring system according to ECE R 141 Axles: * BPW axles and suspension * 2 rigid axles, 1 self-steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Braking system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Gedpfxoy Nu Hkj Aagobn Colors: * Trailer in RAL 3002 carmine red * Rims silver * Tarp in RAL 9006 silver Including accessories: * 1 spare wheel carrier under the loading area, right-hand side in direction of travel * 2-inch kingpin * One galvanized steel front wall * Yellow-red air couplings on the galvanized connection bar at the front * 4 wheel chocks with holders on the front wall * 3 levels of wooden slats * Galvanized folding supports under the rear slope of the loading platform * Adjustable curtain body height approx. 3,960 mm * Galvanized front wall with tension mechanism for sliding curtains * Roof from EDSCHA, adjustable in height by approx. 400 mm, can be slid forward on aluminum roof beam profiles (bolted to front and rear wall) * 3 pairs of sliding stakes in the loading area * Body hydraulically extendable by approx. 750 mm left and right at the rear * Sliding tarp with approx. 700 mm length reserve, tension straps at approx. 600 mm intervals in height * Top edge of body approx. 3,960 mm (laden) * Driving with open sliding roof is not permitted and will damage the tarp * A painted sand layer as anti-slip coating on the gooseneck and loading area checker plates * Cover plates to bridge the gap between ramps and loading area * Electro-hydraulic unit at the rear under the loading area * Mountings for warning boards, including socket, on the left and right of the gooseneck and ramps * Ramp control valves installed on the right side of the trailer * Grating in the gooseneck slope C30/3 (point load approx. 2 t on an area of 20 x 20 cm) * Grating in the slope of the load f

Condition: used, maximum load weight: 51,870 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 03/2025, next inspection (TÜV): 03/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Complete equipment details available upon request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, length approx. 3,700 mm, rear with chamfer approx. 1,000 mm x 10° * For tractors: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * At the front connection strip: yellow-red air couplings * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for hydraulic operations * External beams of the gooseneck with mounting holes for bolted lashing rings Gjdpfxjxtc Uho Aagsbn * One mounting hole at the rear upper part of the gooseneck external beam for a bolted lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in side aluminum drop sides, approx. 400 mm high, anodized version * On the gooseneck, 1 plug-in aluminum rear wall, approx. 400 mm high, anodized version * Approx. 40 mm thick hardwood flooring above the gooseneck * 2-inch kingpin * Gooseneck guide plate for fifth wheel, approx. 500 mm wide * Rear gooseneck mounting for aluminum ramps * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Loading platform, extendable version, length approx. 8,800 mm, rear with chamfer approx. 500 mm x 10° * Recess in the platform and chamfer for accommodating the excavator dipper stick approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension * 1st and 2nd axle fixed, 3rd and 4th axles steering trailing axles * 3rd and 4th axles with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with raise and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Complete platform and interrupted between the axles with approx. 50 mm thick hardwood flooring (increasing the coefficient of friction) * Platform locking with conically welded locking profiles every approx. 250 mm * Elongated slots for insertable and repositionable bridging elements at the front of the platform * Intermediate table with set-down platform, approx. 300 mm wide, for large cross-section telescopic tube with sheet metal covering – front and rear with elongated slots for insertable and repositionable bridging elements – removable cover flush with the platform * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 6 pairs of flush-mounted lashing rings in the outside frame of the platform, foldable outward (LC 10,000 daN) * Additionally, 1 pair of lashing rings externally on the front cross member of the platform, approx. 90° turned inward towards the platform (LC 10,000 daN) * Extendable galvanized widening extensions by approx. 230 mm per side * 1 pair of permanently installed wheel recesses, open up to the extension, approx. 700 x 410 mm (W x D), sheet-covered in the platform ahead of the 1st axle, wheel recesses with square climbing strips approx. 15 x 15 mm, spaced approx. 200 mm * Between the 2nd and 3rd axles, 1 pair of permanently installed wheel recesses on the platform, approx. 1,695 x 700 x 410 mm (L x W x D), covers for wheel recesses split lengthwise, with wooden overlay, outer plug-in loc

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full equipment details available on request. Chassis, cranked * Special steel frame made of high-strength fine-grained steels, electric welded at connection points, well-dimensioned outer frame * 4-axle configuration. Wheel covers above the axles with spray suppression * All steel parts sandblasted * Side underrun protection mounted, made of anodized aluminum * Increased point load capacity approx. 30,000 kg over approx. 4,000 mm * Special construction in the cranked area for the largest possible low-bed length in combination with AluLeg drop supports instead of telescopic spindle landing gears, max. rear swing radius of the tractor unit approx. 2,100 mm Special body with rear stanchion extension * Self-supporting aluminum roof girder/profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stanchions expandable to approx. 4,200 mm * Three sliding stanchions per side with rubber tension relief * Additional central stanchion latches in the roof girder and parking position, operable by pull cable and spring latch * Mechanical lifting roof with height adjustment, lifting roof height approx. 400 mm, operable from both sides or one side only, without opening the opposite side and doors * Additionally, height adjustment of approx. 480 mm in approx. 40 mm increments via height-adjustable stanchions * Front cover on the bulkhead for driving under tarp up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on each side, 450 mm pockets at bottom, four rows of single pockets above * In the high-bed only 3 rows of insertable slats. Intermediate distances evenly distributed Floor * Approx. 27 mm special water-resistant bonded beech multiplex boards, rough surface * Steel plate in the wheel arch area * Forklift suitable according to DIN ? standard * Flush outer frame surface Brakes * WABCO air brake system with EBS according to EC standard 71/320 EEC incl. PREV (Park Release Safety Valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and axle load indicator Gsdpfx Aaslthguogobn Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low loader design * Air suspension with lift and lowering function, total stroke approx. 230 mm * Third and fourth axle as friction-steered trailing axles with electric and mechanical lock Twin tyres * 235/75 R 17.5, -16 ply, incl. spare wheel holder, without spare wheel Paintwork * Chassis in RAL 3002 red, single colour * Central stanchions, axles KTL-coated black * Corner stanchions hot-dip galvanized * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Body single-colour in RAL shade Special equipment included * Air suspension in ECAS version, operation on the semi-trailer * Oversize signage front and rear, galvanized, stepless telescopic, with attached marker lights incl. sockets for revolving beacons (small plates) * Additional sliding roof frame release from outside * 4 stanchion adapters for special outer frame profile, for arbitrary locking of central stanchions * PVC sliding tarpaulins, color similar to RAL 9006 silver * Translucent roof tarpaulin, oversize and overheight specification, flat hooks, tarpaulin folds, closures with locking pawl/OCS * Rear left telescopic socket for warning beacon incl. light * Outer frame for machine transport with approx. 64 lashing poin

Condition: used, maximum load weight: 39,780 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2027, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from equipment – full equipment list on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear slope approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Extendable loading platform * 5 pairs of folding external lashing rings (LC 5,000 daN) * 3 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of recessed front lashing rings in the platform (LC 10,000 daN) * Cutouts in the outer frame for lashing strap hooks (LC 2,000 daN) * Hardwood floor approx. 48 mm thick, over axles with checker plate covering Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: * 205/65 R 17.5 twin tyres Axles: * BPW axles, two fixed axles, two air-suspended trailing steering axles with drum brakes and lift/lower function * Trailing steering axles can be locked electronically during reversing via reverse gear or manually Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel Construction: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: * First-class, durable anti-corrosion protection on the standard shot-blasted welding frame, ensured by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single color, RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 pure white * Wheels in silver Electrical System: * Electrical system according to EU regulations Gsdpfx Aaox Uvlrsgebn Lighting: * 24 Volt ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch kingpin * Galvanized steel front wall approx. 400 mm high * Spare wheel carrier in front of front wall * Yellow-red air couplings at the galvanized front connection panel * 4 wheel chocks with holders on the front wall * Mounts in the rear area of the gooseneck for ALU ramps * Galvanized folding supports under the rear slope of the loading platform * Bracket for warning beacon at rear of trailer * Yellow reflector tape as per EU regulations on sides, sliding section, and rear of trailer * On gooseneck and rear end, left and right, holders for warning boards incl. socket * Mud flap at rear of trailer * Manual and documentation on USB stick * European reflector signs (red-yellow) at rear * 80 km/h speed stickers at rear and both sides * Acoustic reverse signal * Load manometer for axle load determination incl. load diagram

Condition: used, Year of construction: 2021, operating hours: 3,600 h, load capacity: 3,000 kg, lifting height: 3,605 mm, fuel type: gas, gearing type: automatic, Hyster H3.0XT LPG Forklift | 3,000 kg | Lifting Height 3,605 mm | Side Shifter | Heater | 3,600 Operating Hours Factory No.: A380B07417V -- GENERAL -- - Manufacturer: Hyster - Model: H3.0XT - Year of Manufacture: Operating hours: approx. 3,600 h - LPG Engine -- TECHNICAL DATA -- - Load Capacity: 3,000 kg - Lifting Height: 3,605 mm - Mast: Duplex - Engine Power: 46 kW - Own Weight: 5,030 kg - Fork Length: 1,300 mm -- EQUIPMENT -- - Side Shifter Meyer - Heater - Windshield - Windshield Wiper - Weather Protection Canopy - Work Lights - Rotating Beacon - Grammer Driver's Seat - Super Elastic Tires Gedpfxjzc S Hto Aagobn -- TIRES -- - Front Tires: 28x9-15 / 7.0 SE - Rear Tires: 6.50-10 / 5.0 SE - Super Elastic Tires -- OTHER -- - Operating manual available -- We will gladly assist you with loading and organizing the transport. Contact us! We speak the following languages: German, English and Russian! No liability for printing and typographical errors, changes, prior sale and errors reserved! -- WHO ARE WE? -- Leible Nutzfahrzeuge is a family-owned business located in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them with the purchase or sale of vehicles. Convince yourself! -- OUR SERVICE FOR YOU -- Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with organizing special transports. Day licenses / export license plates We will gladly help you with obtaining export license plates / short-term license plates. Handling of customs formalities We will gladly help you with handling customs matters.

Condition: used, Year of construction: 2006, operating hours: 14,130 h, load capacity: 3,000 kg, lifting height: 3,200 mm, fuel type: electric, construction height: 2,250 mm, gearing type: automatic, Equipment: cabin, STILL RX 60-30 I Electric Forklift | Cabin | Side Shifter | Charger Factory No.: 516039008489 -- GENERAL -- - Manufacturer: STILL - Type: RX 60-30 I - Year of Manufacture: 2006 - Operating Hours: 14,130 h - Electric Drive - Battery 80 V -- WEIGHTS -- - Load Capacity: 3,000 kg - Unladen Weight: 3,362 kg - Permissible Total Weight: 8,560 kg -- MAST / ATTACHMENTS -- - Duplex Mast - Free Lift: 160 mm - Lifting Height: 3,220 mm - Overall Height: 2,250 mm - Height Extended: 3,880 mm - KAUP Side Shifter Type 3T151P - Load Capacity Side Shifter: 3,500 kg - Load Center: 500 mm - Weight of Side Shifter: 255 kg - Fork Carriage Distance: 70 mm Gbedpfjzc S Hmjx Aagen - Fork Length: 1,200 mm -- EQUIPMENT -- - Cabin - Heater - Blower - Work Lights - Rotating Beacon - Windshield Wiper - Radio - Solid Rubber Tires - Charger included - Operating Manual included -- TIRES -- - Solid Rubber Tires -- OTHER -- - Maintenance due in approximately 456 operating hours - Signs of wear and tear due to age -- We will gladly assist you with loading and organizing the transport. Contact us! We speak the following languages: German, English, and Russian! No liability for printing & typographical errors, changes, prior sale, and errors reserved! -- WHO ARE WE? -- Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Through our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As we place great importance on customer satisfaction, we offer our customers an excellent all-round service package and provide them with a competent contact person to assist them in the purchase or sale of vehicles. Convince yourself! -- OUR SERVICE FOR YOU -- Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you in organizing special transports. Temporary registration plates / export license plates We will gladly help you in obtaining export license plates / short-term registration plates. Processing of customs formalities We will gladly help you in handling customs matters.

Condition: used, maximum load weight: 29,580 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 11/2019, total width: 2,550 mm, total height: 3,020 mm, Equipment: ABS, Kässbohrer low-loader semi-trailer with 3 axles and 2 ramps Equipment: + 1st axle liftable Gjdpfoy H Tfmjx Aagsbn + 2nd and 3rd steering axles + 2x hydraulic 300 mm loading ramps + 2x supports + Extendable by 4 meters + Removable wheel recesses for machines up to 3.40 m + BPW axles + Air suspension + ABS We are also happy to assist you with financing/leasing options through our partners. All information provided without guarantee. Subject to errors and prior sale.

Condition: used, Year of construction: 2014, operating hours: 4,097 h, Equipment: all wheel drive, KUBOTA KX 121-33 Alpha Mini Excavator Model: KX121-33 ALPHA Serial Number: 77397 Product ID Number: WKFRGU400Z077397 Gbjdpfsxafg Hox Aagjn Colour: RED + Digging bucket Operating weight: 3.9 t Transport length: 5.06 m Transport width: 1.7 m Transport height: 2.49 m Bucket capacity: 0.12 m³ Bucket width: 0.6 m Track width: 350 mm Reach: 5.6 m Digging depth: 3.51 m Breakout force: 32.5 kN Engine power: 29.4 kW Displacement: 2.2 l RPM at max. torque: 2250 rpm We are also happy to assist you with financing/leasing options together with our partners. All information provided without guarantee. Subject to errors and prior sale.

Condition: good (used), mileage: 212,000 km, power: 132 kW (179.47 HP), first registration: 02/2019, fuel type: diesel, Year of construction: 2019, Iveco Daily 35C180 3.0hpt 180hp L2H2 Year of manufacture: 02/2019 Mileage: 212,000 km, 1st owner Engine: 3.0hpt 180hp, Euro 6 Options: Air conditioning Cruise control Suspended driver's seat Electric windows Electric mirrors Central locking Twin rear wheels Tow hitch Etc. Gbjdpszb Dt Aefx Aagjn Price: 12,500 euros + VAT = 15,125 euros all-in For sale to dealers or for export More information: 0473/19.99.85

Condition: refurbished (used), Benhil 8358 & 8535 Butter Portion Packer with twin filling/ /Stainless steel hopper / 90 degrees Paper Feed / Capacity Up to 510 pcs per minute Benhil 8358 Twin Filling Butter Portion Packer Stations : Paper feed, paper splitting, Paper forming box, Filling , Wrapping, Pressing, outfeed conveyor, semi automatic rotary case Packer . Capacity : 420 -510 pcs per minute depending on Product weight. Fully Refurbished 12 months ago spent over € 200.000 Key Features: - Portion Control: Benhil packing machines are designed to package butter in accurate, portion-controlled sizes, which is essential for food service operations. - Flexible Options: They often accommodate different types of butter packaging, including mini portions or larger units, catering to various market needs. - Automation: Many of these machines feature automated systems for filling, sealing, and labeling, which helps to increase efficiency and reduce manual labor. - Integration: They can typically integrate with other food processing equipment in a production line, such as mixers or chillers. - Customization: Options for customization may be available based on output requirements, packaging materials, and specific market needs. Technical Aspects: - Speed: The packaging speed can vary depending on the specific machine model, with some machines capable of filling hundreds to thousands of units per hour. - Ease of Cleaning: The machines are designed for easy disassembly and cleaning, complying with food safety standards. - Energy Efficiency: Modern Benhil machines may focus on energy efficiency, reducing operational costs. - Durability: Built to withstand high volume production environments, they are made from high-quality stainless steel and other durable materials. Applications: - Food Service: Used in restaurants, hotels, and catering services for packaging butter portions for table use. - Retail: Often used for packaging butter for supermarket sales in portioned formats. Paper feed: 90 degree Hopper: Stainless steel Guards: Electro Guards Case Packing: 5 x 8 x 5 pcs 200 per box Capacity: 420-510 pcs per minute Case Packer: Included Filling Volume: 6 - 20 grams Condition: Fully refurbished 12 months ago Latest Production: 2 months ago Electrical Requirements: 3 phase 400 v/50 and 60 hz USA ELECTRICAL REQUIREMENTS: Available upon request Gjdpfxszavu Aj Aagsbn Available: Immediately Case Packer Model : 8342

Condition: used, Year of construction: 2022, operating hours: 1,630 h, Komatsu PC80MR-5 compact excavator from 2022 with only 1,630 operating hours! * Manufacturer: Komatsu * Model: PC80MR-5 * Year of manufacture: 2022 * Indicated operating hours: approx. 1,630 * Good rubber pads * Hammer line * Air conditioning (A/C) Godpfx Aaeyumptogebn * Operating weight: approx. 8,090 kg * Power: 46.2 hp * Includes quick coupler and one digging bucket * More photos and video available upon request (WhatsApp – Erik) * Price: €44,900, net + 19% VAT ----For further questions please call: Erik Kortum: WhatsApp All information provided without obligation or guarantee. Subject to errors and prior sale.

Condition: used, Year of construction: 2021, operating hours: 1,589 h, JCB 8026 CTS Mini Excavator from year 2021 with only 1,589 operating hours! ---- * Manufacturer: JCB Gsdpfx Aey N It Roagsbn * Model: 8026 CTS * Year of manufacture: 2021 * Recorded operating hours: approx. 1,589 * Incl. 3 buckets * Operating weight: 2,867 kg * 18.9 kW * Good condition * Good tracks * Further photos & video available upon request (WhatsApp) * Price: €20,900 net + 19% VAT ---- For further questions please call: Erik Kortum: WhatsApp All details provided without guarantee or liability; errors and prior sale reserved.

Condition: used, Year of construction: 2017, operating hours: 3,149 h, Equipment: all wheel drive, Yanmar V70S articulated swing loader from 2017 with only 3,149 operating hours! * Manufacturer: Yanmar * Model: V70S * Year of manufacture: 2017 * Indicated operating hours: approx. 3,149 * Includes folding bucket & forks * Operating weight: approx. 5,400 kg * Power: 45 kW * Deutz diesel engine * German machine Gbedpfx Aaoy N Itkjgen * More photos and video available on request * Price: €24,900 net plus 19% VAT For further questions please call: Erik Kortum: WhatsApp All specifications are subject to change and provided without guarantee. Errors and prior sale excepted.

Condition: used, maximum load weight: 4,680 kg, overall weight: 6,500 kg, axle configuration: 2 axles, first registration: 01/1999, next inspection (TÜV): 03/2026, Low-loader Blomenröhr, type 552/6500, standard version with loading ramps, rear supports, air brake system, front storage box, MOT until 03/2026, in good and ready-to-use condition. Godpsxthbyofx Aagsbn

Condition: used, maximum load weight: 5,000 kg, overall weight: 6,900 kg, axle configuration: 2 axles, first registration: 07/2008, loading space length: 4,580 mm, loading space width: 2,030 mm, * Blomenröhr 552/6900 low-loader * 2 axles * 5-ton payload * Height-adjustable tandem Gedpfxoytzi Ss Aagebn * Original integrated ramps

Condition: used, maximum load weight: 5,500 kg, overall weight: 7,500 kg, axle configuration: 2 axles, first registration: 09/1994, next inspection (TÜV): 02/2026, loading space length: 4,690 mm, loading space width: 1,890 mm, total width: 2,010 mm, Hoffmann low loader, type LTD 11.T, de-rated, in standard version with loading ramps, air brake system, front toolbox, TÜV valid until 02/2026, in good and ready-to-use condition. Gedjxq Uf Hjpfx Aagjbn

Condition: used, maximum load weight: 4,880 kg, overall weight: 6,500 kg, axle configuration: 2 axles, first registration: 02/2000, loading space length: 4,580 mm, loading space width: 1,890 mm, total width: 2,870 mm, Blomenröhr low loader, type 552/6500, in standard version with loading ramps, rear supports, air brake system, front storage box, new TÜV, in good and ready-to-use condition. Gsdpfx Aajxtcl Hjgobn

Condition: new, empty load weight: 6,650 kg, maximum load weight: 21,350 kg, overall weight: 28,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, wooden floor 70 mm thick, 18 lashing eyes, 12 stake pockets, 2 ramps each 3,110 mm long x 760 mm wide, climbing bar on the outside of the ramps and rear slope, hydraulic one-piece ramps, loading height: 880 mm, technical possible total weight: 31 t, incl. axle load indicators. Additional options: Last axle as steering axle: €3,500; warning panels + lighting and rotating beacon: €200; width extension to 3 m with timber: €300; hydraulic ramp shift: €1,000. Also available with K80 towing eye! -- Subject to misprints, errors and changes, sample images -- More data at: !, More Details: ! Gsdpfx Aezc U T Aeagsbn

Condition: new, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, wooden floor 70 mm thick, 18 x lashing eyes, 2 x ramps each 3,100 mm long x 760 mm wide, ramps with spring lifting gear, 8 x stake pockets, loading height: 900 mm, 2 x toolbox, incl. axle load indicators, , Surcharge for: Galvanized steel bulkhead: 500 ¤, , , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gbodpfezc U T Nsx Aagon

Condition: new, empty load weight: 7,300 kg, maximum load weight: 23,700 kg, overall weight: 31,000 kg, axle configuration: 3 axles, loading space length: 8,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, wooden floor 70 mm thick, 18 lashing rings, 12 stake pockets, 2 ramps each 3,110 mm long x 760 mm wide, climbing strips on the outside of the ramps and rear slope, one-piece hydraulic ramps, loading height: 880 mm, incl. axle load indicators. Surcharges for: last axle as steering axle: €3,500, warning panels + lighting and rotating beacon: €200, widening to 3 m with wooden inserts: €300, hydraulic ramp shifting: €1,000. Also available with K80 towing eye! -- Errors, mistakes and changes excepted, sample pictures -- More details at: ! Gjdpfx Aaezc U Tijgebn

Condition: used, empty load weight: 7,180 kg, maximum load weight: 23,820 kg, overall weight: 31,000 kg, axle configuration: 3 axles, first registration: 05/2024, loading space length: 7,500 mm, suspension: air, tire size: 235/75R17,5 --/140J, color: other, gearing type: other, front tire size: 235/75R17,5 --/140J, rear tire size: 235/75R17,5 --/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Chassis: hot-dip galvanized, wooden floor 70 mm thick, 18 lashing rings, 12 stake pockets, 2 ramps each 3,110 mm long x 760 mm wide, hydraulic one-piece ramps, loading height: 880 mm, incl. axle load indicators, last axle is a steering axle, -- Subject to errors, mistakes, and changes, sample pictures -- More data under: !, More Details: ! Godpfx Aaezc U Sxogjbn

Condition: new, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: hot-dip galvanized, wooden floor 70 mm thick, 20 tie-down points, loading ramps (approx. 3,100 x 750 mm), climbing strip on the outside of the ramps and rear slope, side-adjustable ramps, ramps with spring lifting mechanism, 8 stake pockets, loading height: 900 mm, 2 toolboxes, contour marking according to regulations, incl. axle load indicators. Surcharge for: steel front wall - galvanized: €500. -- Subject to misprints, errors and modifications. Sample images. More data at: !, More details: ! Gedpfx Aaezc U S Eegjbn

Condition: new, empty load weight: 3,780 kg, maximum load weight: 10,620 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,470 mm, suspension: steel, tire size: 215 /75 R 17,5, color: other, gearing type: other, front tire size: 215 /75 R 17,5, rear tire size: 215/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 400 mm drop sides, chassis: hot-dip galvanized, wooden floor, 10 lashing eyes, 2 x ramps (2,500 mm x 500 mm), ramps with spring jack, twin tyres: 8 compartment 215 /75 R 17.5, geared support winch with load and fast gear, front, 2 folding supports, rear, loading height approx. 850 mm , , , , -- Subject to printing errors, mistakes and changes, sample pictures --, More data under: !, More Details: ! Godpfxezc U Uas Aagjbn

Condition: new, overall weight: 31,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,550 mm, suspension: other, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Wooden floor 70 mm thick, 18 x lashing eyes, 2 x ramps each 3,000 mm long x 750 mm wide, hydraulic 1-part ramps, loading height: 900 mm, , --  Subject to printing errors, errors and changes, sample images --, More data at: !, More details: ! Gjdpfx Aajzc U Tvjgsbn

Condition: new, empty load weight: 6,950 kg, maximum load weight: 24,050 kg, overall weight: 31,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: hot-dip galvanized, wooden floor 70 mm thick, 18 lashing rings, 12 stake pockets, 2 ramps each 3,110 mm long x 760 mm wide, hydraulic one-piece ramps, loading height: 880 mm, incl. axle load indicators. Surcharge for last axle as steering axle: €3,500; warning panels + lighting and beacon: €200; widening to 3 m with timber: €300; hydraulic ramp shift: €1,000; side and front walls: €3,500. Also available with K80 drawbar eye! -- Subject to printing errors, mistakes and changes, sample images -- More data at: !, More Details: ! Gbedpfszc U Tpex Aagen