Used Compair Compair Regatta 160A for sale (172)

Condition: used, mileage: 25,640 km, power: 175 kW (237.93 HP), first registration: 03/2007, fuel type: diesel, empty load weight: 16,800 kg, maximum load weight: 1,200 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,900 mm, brakes: engine braking, color: yellow, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, cabin, central locking, compressor, cruise control, differential lock, low noise, onboard computer, power assisted steering, Vehicle location: Bovenden, registration no. house, swivel seat, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, switch 6, ABS (anti-lock braking system), constant throttle, power take-off, differential lock, work lights, rotating beacon, storage box, fire extinguisher box, leaf spring suspension, low-noise G1, U-protection, side aluminum driving protection, roof hatch, emergency stop, foldable, 4-point hydraulic support, radio remote control, environmental badge green, compressor radio remote control, green environmental sticker, compressor Wheelbase: 3900 mm Body: 8.5m AMV lifting platform with CompAir compressor and radio control 7.5t front axle, rear axle H7 13t disc wheel 233, ABS, disc brakes with full protection on front and rear axle, rear axle stabilizer, steel bumper, configurable special module (PSM), additional thermal insulation, pollen filter, remote cockpit, on-board diagnostics 1, automatic daytime running lights, flame retardant, transmission oil cooling, rear engine output for hydrp. max 200Nm, power take-off MB 60-2 MPA low position, N speed. Working height 8.5m, max. load 1,000kg ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gbedpfxevhk N He Almel - .

Condition: used, mileage: 24,460 km, power: 175 kW (237.93 HP), first registration: 10/2007, fuel type: diesel, empty load weight: 16,755 kg, maximum load weight: 1,245 kg, overall weight: 18,000 kg, axle configuration: 4x2, brakes: engine braking, color: yellow, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 2, front tire size: 385/65R22.5, rear tire size: 315/80R22.5, Equipment: ABS, additional headlights, cabin, central locking, compressor, cruise control, differential lock, low noise, onboard computer, power assisted steering, Vehicle location: Bovenden, registration no. house, swivel seat, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, switch 6, ABS (anti-lock braking system), constant throttle, power take-off, differential lock, work lights, rotating beacon, storage box, fire extinguisher box, leaf spring suspension, low-noise G1, U-protection, side aluminum driving protection, roof hatch, emergency stop, foldable, 4-point hydraulic support, radio remote control, environmental badge green, compressor radio remote control, green environmental sticker, compressor Superstructure: 8.5m AMV lifting platform with CompAir compressor and radio control 7.5t front axle, rear axle H7 13t disc wheel 233, ABS, disc brakes with full protection on front and rear axle, rear axle stabilizer, steel bumper, configurable special module (PSM), additional thermal insulation, pollen filter, on-board diagnostics 1, automatic daytime running lights, flame arrester, transmission oil cooling, rear engine output for hydrp. SAE-B max 200Nm, auxiliary drive MB 60-2 MPA low position, N speed. Working height 8.5m, max. load 1,000kg Approx. 1510 operating hours! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gbodpfx Aovhh Dujlmsl - .

Condition: new, Year of construction: 2026, neu 2026 080186 prompt, Zwischenverkauf v Türkei 81476 € 1309.77 € 1 69300 € 135 to 3050 mm Y1 / Y2 / X und RAchse 265 mm 2600 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 120 mm/s 500 mm 500 mm/s 350 mm/s 250 mm 900 mm 150 l 15 kW 4250 mm 1700 mm 2850 mm 9580 kg Special campaign Special price and SKY 22 control free of charge Standard accessories: 4 axes (Y1, Y2,X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation Gbsdpfswirtnox Almjl - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010/A /75°/0.8/105, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ...

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SEW400A, Complete Klöckner Möller - Siemens BD2 - 400A busbar system available! Gjdsw Etm Iepfx Almobl Stock: approx. 29 linear meters – Price is per meter! Type BD2C-3-400-SB3 / 400 Amps – 5-pole – L1 L2 L3 N PE – copper – no aluminum conductors! Rated voltage Ui max. 690V, frequency 50 – 60 Hz Busbar lengths: 17x 3.25m, 1x 2.25m, 5x 1.25m Price per meter includes connectors, end caps, and mounting brackets Feed-in and distribution boxes in 16-32-63-125-250A are available as options Dismantling was carried out by a certified electrician. Busbars are in excellent condition!!!! Please inquire for your required lengths or accessories! In stock, available immediately!!! Attention: 100A, 160A, 250A, and 400A busbars are also available – please inquire!!! ----- Old Klöckner Moeller BD1 system still available! Busbars, elbow sections, feeders, and distribution boxes for the old Klöckner Moeller BD1 / BD 1 system in stock!!! Are you also looking for a crane system?

Condition: new, Coolers, models Kaeser, Atlas Copco, Compair Gedpfxsx I E Ayo Almobl COOLER – Atlas Copco GA all models COOLER – KAESER all models OIL COOLER

Condition: good (used), Auxiliary switch, circuit breaker, fuse, line switch, circuit breaker, load break switch, terminal board -Manufacturer: wöhner, fuse switch disconnector switch disconnector -Type: QCB NH1 250A -Fuse: 3x 160A -Number: 1x load-break switch available -Dimensions total: 250/180/H115 mm -Weight: 3.0 kg Gbsdpfexnlmvjx Almsl

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Oerlikon, Inverter welding machine type CITISTICK 160 -Welding current range: 5-160A -Mains connection: 230V -Accessories: Welding cable with electrode clamp, ground cable Godpfex Ir Ipsx Almjbl -Dimensions: 430/300/H340 mm -Weight: 11 kg

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE200 series is an electrically driven high pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 25 to 350 l/min. The frame consists of hot-dip galvanised sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others on request. General specifications: ----- Gbjdpfx Aehga S Delmsl Drive motor power: 150 kW (50Hz) / 150 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE150 series is an electrically driven high pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Gbsdohga Scepfx Almel 50 Hz -bar-l/min. CE150-200-240 CE150-250-200 CE150-1000-50 CE150-1400-33 CE150-2500-21 60 Hz and others see data sheet and on request. General specifications: ----- Power of drive motor: 90 kW (50Hz) / 110 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Standard accessories included.

Condition: used, machine/vehicle number: Prüfstand Antrieb, performance 110 KW tension 400 V speed 1,500 to 5,000 rpm Godpfx Ajdfm Nrolmobl adjustable motor with - frequency converter - incremental encoder, line choke, network filter - external fan emergency stop device manual control unit *frequency converter:* type: VCD 4 S 160A AZ/NS serial number: BKQ4S160AN20A-1 output: 207 KVA motor performance up to 160 KW total weight approx. 1,000 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: SEW1000A, Complete Klöckner Möller - Siemens BD2 - 1000A Busbar System available! Stock: 34 running meters - Price is per meter! Type BD2C-3-1000-SB3 / 1000 Amps - 5-pole - L1 L2 L3 N PE - copper conductors only, no aluminum! Voltage Ui max. 690V, frequency 50 - 60 Hz. Busbar length: 10 x 3.25m, 1 x 2.25m. Price per meter includes connectors, end caps, and brackets. Feeder and tap-off boxes 16-32-63-125-250A are optionally available. Disassembly was carried out by a qualified electrician. Busbars are in top condition! Please inquire about your required lengths or accessories! Stock item, immediately available! Gsdow Etmbepfx Almjbl Note: 100A, 160A, 250A, and 400A busbars also in stock – please inquire! ----- Old Klöckner Moeller BD1 system still available! Busbars, corner pieces, feeder units, and tap-off boxes for the old Klöckner Moeller BD1 / BD 1 system in stock! Are you also looking for a crane system?

Condition: used, Year of construction: 2009, functionality: fully functional, Offered is a turning and milling machine EMAG VLC 800 MT with tool changer. The machine has a turret with 12 tool positions (VDI 50) and a milling spindle with tool changer for up to 96 tools. The tool magazine can be loaded during processing, which reduces setup time and allows the use of sister tools. The proven EMAG turret is available for turning operations on the machine. On the multifunctional VLC 800 MT production center, workpieces up to 800 mm in diameter can be completely processed in a single clamping. The following components will be sold with the machine: - Pick-up station - Extraction unit (IFM) - Coolant system with belt filter - Chip conveyor CONTROL Siemens 840D MACHINE CONNECTION Mains voltage: 400V AC 50 Hz Connected load: 92kW Rated current: 143A Max. backup fuse: 160A The machine is sold on an “as seen” basis, without any warranty claims. Godpfxjw Au U Ue Almobl The machine will be available from November 2025, machine is in production until Oktober. The machine can be completely overhauled on request. Please do not hesitate to contact us fot further information.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, input voltage: 460 V, power: 60.2 kW (81.85 HP), input current: 85 A, input frequency: 50 Hz, Equipment: type plate available, GWK Compact Chiller, Industrial Cooling and Heating Unit, weco 48.1 wzttx + twd 6, weco e b 5x15 w m25 pt 4x x c x Technical Data: Operating voltage: 400/460V AC ±10 % Rated current: 85A Max. circuit protection: 160A Frequency: 50/60Hz Control voltage: 24/230V Electrical connected load: 60.2kW Wiring diagram no.: 489885 Rated cooling capacity: 15/18kW Gbodpfjx Apzmsx Almel Max. operating temperature: 80°C Refrigerant: R449A Max. fill weight: 10kg CO₂ equivalent: 13.97t Global Warming Potential: 1397 Max. operating overpressure Psh: 23bar Max. operating overpressure Psl: 10bar Compressor volume flow: 140/168m³/h Compressor speed: 1450rpm Compressor final pressure: 29.5bar Important Note: Contains fluorinated greenhouse gases covered by the Kyoto Protocol!

Condition: excellent (used), functionality: fully functional, type of input current: AC, power: 47.7 kW (64.85 HP), input current: 80 A, GWK Compact Chiller, Industrial Cooling and Heating Unit, weco 48.1 wzttx + twd 3, weco e z 3x10 w m25 pt 5 x x c x General Information: Gsdpfx Alex Apxfjmebl Compact industrial cooling and temperature control unit for regulating process media. Designed for high-temperature process cooling and temperature control applications. Technical Data: Operating voltage: 400/460V AC ±10 % Rated current: 80A Maximum pre-fuse: 160A Frequency: 50/60Hz Control voltage: 24/230V Electrical connected load: 47.7kW Wiring diagram number: 489948 Rated cooling capacity: 10/13kW Maximum operating temperature: 90°C Refrigerant: R449A Maximum filling weight: 13.6kg CO₂ equivalent: 19.07t Global Warming Potential: 1397 Max. operating overpressure Psh: 23bar Max. operating overpressure Psl: 10bar Compressor displacement: 102/121m3/h Compressor speed: 1450/1750rpm Compressor final pressure: 29.5bar Important Note: Contains fluorinated greenhouse gases covered by the Kyoto Protocol!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, input voltage: 400 V, power: 65.9 kW (89.60 HP), input current: 102 A, GWK Industrial Cooling and Heating Unit, weco 48.1 wzttx + twd 18, weco e b 20 w m20 pt 5x x c x Technical Data: Operating voltage: 400/460V AC ±10 % Rated current: 102A Max. pre-fuse: 160A Frequency: 50/60Hz Control voltage: 24/230V Electrical connected load: 65.9kW Circuit diagram number: 489850 Rated cooling capacity: 20/25kW Max. operating temperature: 30°C Refrigerant: R449A Gbsdpfox Aprlex Almsl Max. charge weight: 10kg CO₂ equivalent: 13.97t Global Warming Potential: 1397 Max. operating overpressure Psh: 23bar Max. operating overpressure Psl: 10bar Compressor displacement: 140/168m3/h Compressor speed: 2900/3500rpm Compressor end pressure: 29.5bar Important note: Contains fluorinated greenhouse gases covered by the Kyoto Protocol!

Condition: used, mileage: 263,069 km, power: 154 kW (209.38 HP), gearing type: mechanical, fuel type: diesel, color: orange, overall weight: 16,000 kg, empty load weight: 9,840 kg, number of seats: 3, first registration: 06/2002, Year of construction: 2002, operating hours: 10,533 h, Equipment: additional headlights, cabin, hydraulics, Road marking machine: + Hofmann + H75-1000 + Thermoplastic + Electric heater (400V) + Thermoplastic tank with gas heater and hydraulic agitator + Paint and bead spray left / right + Line segment computer + Rear and front warning system + CompAir DLT 0404 compressor with Deutz diesel engine (9,513 operating hours) Godpfx Ajxal A Uelmobl + Kubota Diesel V1505 drive engine (22,975 operating hours) + Renault Midlum 210 chassis + First registered: 10.06.2002 + 263,069 km; 10,533 operating hours + 3-seater + Manual transmission with reduction gear + Hand throttle Unladen weight: 9,840 kg; permissible total weight: 16,000 kg + 813 cm x 250 cm x 325 cm (LxWxH) Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 52400 € 990.36 € 60 to 1250 mm 3 (Y1, Y2, X) 265 mm 1050 mm 450 mm 530 mm hydraulisch 200 mm/s 10 mm/s 110 mm/s 650 mm 500 mm/s 900 mm 104 mm 100 l 7.5 kW 2300 mm 1550 mm 2850 mm 4700 kg Standard accessories: 3 axes (Y1, Y2,X ) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) Gbsdpfswird Tex Almsl - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 94120 € 1778.87 € 175 to 4050 mm Y1 / Y2 / X Achse 265 mm 3600 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 250 l 18.5 kW 5250 mm 1700 mm 2850 mm 12780 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides Gsdpfewiqr Njx Almobl CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PDF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 57920 € 1094.69 € 60 to 2050 mm 3 (Y1, Y2, X) 265 mm 1700 mm 450 mm 530 mm hydraulisch 200 mm/s 10 mm/s 110 mm/s 650 mm 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 100 l 7.5 kW 3200 mm 1550 mm 2850 mm 5600 kg 650 mm 3 axes (Y1, Y2,X ) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: Gbjdpfx Ajwirivslmel - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 69320 € 1310.15 € 100 to 3050 mm Y1 / Y2 / X Achse 265 mm 2600 mm 450 mm 530 mm hydraulisch 180 mm/s 10 mm/s 120 mm/s 500 mm/s 900 mm 104 mm 11 kW 4200 mm 1670 mm 2850 mm 8500 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC CONTROLLED CROWNING TABLE upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PDF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Gedpfx Aowirdmelmebl Quick Release Clamping

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 137900 € 2606.31 € 220 to 6050 mm Y1 / Y2 / X Achse 265 mm 5100 mm 450 mm 530 mm hydraulisch 160 mm/s Godpswiq R Sjfx Almjbl 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 1050 mm 154 mm 250 l 22 kW 7500 mm 1770 mm 3350 mm 20800 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF:- more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... PRICE FCA TÜRKIYE optional equipment: R-axix Z1/Z2/R-axes DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick release clamping for upper tool

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 100920 € 1907.39 € 220 to 4050 mm Y1 / Y2 / X Achse 265 mm 3600 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 250 l 22 kW 5250 mm 1770 mm 3000 mm 14750 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling Gbodpfewirwgox Almol users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis R/Z1/Z2-Axis DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping