Used Delfin Deva 400 for sale (17,945)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,300 kg, maximum load weight: 9,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 900 mm, total length: 12,000 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis Steel welded construction Turntable with robust ball bearing Foldable rear support 2 wheel chocks + holder Aluminum side underrun protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Excavator arm recess starting above the rear axles to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 storage box recessed in the gooseneck in the floor with a lid, W=720 mm/ L=520 mm / D= 170 mm 1st pair of wheel recesses recessed in the gooseneck in the low-loader wheel well area, sloped for access, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! Frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses between the axles recessed in the low-loader in the wheel well area, sloped for access, length at the bottom approx. 600, approx. 300 mm deep. Note! Frame in the main beam area is 300 mm higher than the wheel recess. Wheel recess cover pull-out from the main frame, with wood inserts. Distance from the outer frame, beam to beam, approx. 1280 mm Extensions pull-out to 3,000 mm, foldable at the wheel recess extensions (extension not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for wooden planks in the middle of the loading area or under the loading area, depending on technical feasibility Wooden planks 70 mm for extension to 3000 mm Lashing points, low-loader Nsdpfei Ri I Nsx Acfswh 1 pair of ring lashing points recessed at the front on the gooseneck, each 5 tons 8 pairs of lashing eyes at the top and on the side recessed in the outer frame, each 10 tons 2 x at the front on the gooseneck 6 x in the low-loader, the first lashing point 250 mm from the front and the last one max. 250 mm from the rear, the distance between the lashing points is no more than 1100 mm 5 pairs of ring lashing points recessed in the outer frame, each 5 tons (can be converted to stake pockets) Coupling system, trailer, turntable Drawbar with tested 50 mm drawbar eye with 8° inclined drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Air suspension with lifting and lowering valve, can be operated separately at the front and rear Wheels and tires 235/75R17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake Trailer Info Center for displaying vehicle data such as axle load (no calibrated scale) and odometer Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be suitably prepared, no truck installation (no calibrated scale) Vehicle-driving stability system Duomatic connection at the front, with connecting cable to the towing vehicle EBS, Electronic Braking System with EBS plug at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plat

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space height: 900 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Additional Information Low-bed semi-trailer chassis Steel welded construction Turntable with heavy-duty ball bearing ring Folding rear outriggers 2 support wedges with holder Aluminum side impact protection Rear splash guards covering the entire width Semi-fender for 1st and 2nd axles with anti-spray splash guards behind each axle, anti-spray splash guards in front of and behind the 3rd and 4th axles Excavator arm recess above the rear axles, extending to the rear, approximately 1800 mm long, approximately 650 mm wide and approximately 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess, laterally on the longitudinal frame, approximately 300 mm from the front and approximately 200 mm in front of the rear slope 1 plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock (lock not included) 1 storage box recessed in the gooseneck at the bottom with lid, W=720 mm/ L=520 mm / D= 170 mm Extendable widening elements to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Storage compartment for wooden planks under the loading platform Lashing eyes for low-bed trailer (40 lashing options) 1 pair of lashing eyes on the gooseneck, each 5 tons 9 pairs of lashing eyes embedded above and on the side in the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed 6 pairs of lashing eyes in the outer frame from the low bed, each 5 tons (for attaching tie-down straps) 3 pairs of folding lashing eyes additionally, each 10 tons 1 x inside next to the main frame at the beginning of the low bed 1 x on the gooseneck (protruding) 1 x behind the last axle, recessed in the floor Coupling device for the trailer turntable Drawbar with tested 50 mm drawbar eye, drawbar eye inclined by 8° / D-value min. 160 kN Nwjdji Ri Daopfx Acfsh Axles + Suspension Drum brake axles Parabolic spring suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization at the front and rear (rocker equalization) Wheels and Tires 235 / 75 R 17.5 according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning signs double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel / checkered plate covering followed by 70 mm softwood floor, wheel arch area with steel / checkered plate covering Rear slope with 70 mm softwood floor Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood Hydraulically operated via towing vehicle auxiliary drive with throttle, operation on the left-hand side at the front Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Country of Registration / Signs Country of Registration: Germany 24/7 Service Hotline prepared for two-line license plate holder Contour marking with reflective strips ac

Condition: excellent (used), Year of construction: 2015, operating hours: 68,946 h, functionality: fully functional, In operation Hours: 68946 h. Clamping force: 1500 kN Nwsdpfx Asyab R Njcfeh Clamping unit 520 H Opening force / stroke: 450 mm. Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight: 6700 kg. Height: 2215 mm. Length: 4672 mm. Complete installation also available: Injection moulding machine + WITTMANN W818-2066 (2013) Robot + Conveyor belt Robot WITTMANN W818-2558 (2013)

Condition: used, Year of construction: 2004, max. plate size 680 x 780 mm Nwodpfxozgxbwo Acfeh min. plate size 240 x 240 mm max. speed plates 20 /h incl. RIP chemical free

Year of construction: 2017, condition: reconditioned (used), functionality: fully functional, Hello, the machine described in the offer text is from the year 2017 (2018 models are sold out). Newer models are available upon request for an additional charge! Here we offer you 1 MEIKO glass and dishwashing bistro dishwasher with an integrated reverse osmosis system at the rear. Without dishwasher baskets! Collection from our warehouse is possible; shipping within Germany and the EU is available for an additional charge upon request. B2B = 6 months warranty. Warranty/guarantee applies only to the wash motor, pressure booster pump, and circuit boards. Njdpfx Aequ Ukrecfewh A detailed description of the aforementioned device can be found in the PDF. The images are for illustrative purposes only and are similar to the device being offered! Payment only in advance, no PayPal!

Condition: used, overall weight: 47 kg, clamping range: 400 mm, jaw width: 175 mm, Modular Precision Vise Clamp length 400 mm Jaw width 175 mm Weight 47 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Nwsdpfszdq Nzjx Acfeh

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: very well maintained Equipment and technical data: Saw unit can be tilted up to 45° 3 speeds: 3500/4500/5500 rpm Motor: 7.3 kW S6 Cutting length: 3200 mm Cutting width: 1250 mm Cutting height max.: 133 mm Electric height adjustment Nedszbv Hhspfx Acfjwh X-Motion screen control with 5.7" monitor Controlled parallel fence Parallelogram guard, height-adjustable, can be swiveled out of the working area, saw blade diameter max. 400 mm Dust extraction connection 80 mm Scoring unit 1.1 kW, 8500 rpm with 2 axes Crosscut fence with 2 digital jaws Tool compartment for 5 saw blades Graduated scale index with length compensation for extension table Parallel fence with digital display and automatic length compensation when the saw blade is tilted, fence ruler length 1200 mm, can be swiveled out Availability: short notice Location: 63934 Röllbach

Condition: good (used), Year of construction: 1997, FOR SALE: CNC Vertical Gear Grinding Machine – GLEASON TAG 400 📊 Machine Capabilities (Gleason TAG 400 Specifications) Feature Technical Specification Workpiece Orientation Vertical (Clamped on a rotary table with an upper center) Maximum Workpiece Diameter 400 mm Maximum Tooth Width (Z-axis) 200 mm Admissible Module Range 0.5 to 8.0 mm Programmable Number of Teeth 6 to 600 teeth Maximum Helix Angle ± 45° (for helical gears) Pressure Angle 14.5° to 30° Center Distance (Maximum workpiece length) 200 to 800 mm Maximum Workpiece Weight Approx. 70 to 90 kg Total Machine Weight Approx. 9,000 kg BT MACHINES BUYING AND SELLING Nwsdjzdt Igjpfx Acfeh ALL TYPES OF INDUSTRIAL EQUIPMENT MACHINE TOOLS, ALL TYPES

Condition: new, Year of construction: 2026, Brushing machine model “MASTER 400” VALMEC NEW Technical specifications: Nwedpey R Tqdjfx Acfeh Machine equipped with two horizontal brush units. Manual adjustment of the brush units with digital display. 2 brush motors, each 3 kW (belt driven). Variable conveyor belt speed from 4 to 12 m/min with frequency inverter. Conveyor belt motor: 0.37 kW. Brush units mounted on precision rails. One side of the brush unit is open, allowing processing of large workpieces. Usable working width: 400 mm. Maximum working height: 300 mm. Maximum brush diameter: 210 mm. Compliant with CE standards. Machine is equipped with: One steel brush, 400 mm long and 210 mm diameter. One Tynex brush, grit 80, 400 mm long and 210 mm diameter.

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Nwjdpjxwdw Esfx Acfjh Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, all stainless steel belt width 400 mm mobile adjustable speed filling capacity 27 L Njdpfx Ajzddfdjcfswh weight: 390 kg dimensions (l x w x h): ± 2.860 x 750 x 1.450 mm With adjustable take-over outfeed conveyor

Condition: good (used), Year of construction: 1993, COSMEC SM 400 multi-saw - after the technical review - very good condition - Italian production - year of production 1993 TECHNICAL PARAMETERS: cutting width 400 mm cutting height 160 mm engine power 37 kW smoothly adjustable feed speed spindle diameter 55 mm sleeve diameter 70 mm four rows of anti-recoil pawls the three upper pressure rollers table width 710 mm minimum element length 700 mm shaft height adjustment guide ruler laser Nwodpfxsgyz Rvs Acfoh central lubrication spigot diameter 200 mm dimensions of the machine (length / width / height) 220/190/180 cm weight 1800 kg

Year of construction: 2015, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 2015. This Negri Bossi 1300H-400 features a screw diameter of 40 mm and a real injection volume of 232 cc. It offers a maximum clamping force of 1300 kN and a max opening stroke of 420 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi 1300H-400 machine we have for sale. Contact us for further details. Nwjdpfx Aszfku Tjcfsh

Condition: good (used), Catalogue number 7872 TECHNICAL DATA - Infeed width: 450mm - Infeed height: 200mm - Shaft width: 530mm - Shaft diameter: 480mm Nwsdpfx Acoy Rr Rcjfsh - Knife length: 530mm - Number of knives: 2 pcs - Screen size: 50x50mm - Lower toothed feed roller: 2 pcs - Lower shaft motor: 0.75kW - Upper toothed feed roller: - Upper shaft motor: 0.75kW - Main motor: 45kW - Machine dimensions (L/W/H): 3600x1700x1400mm - Weight approx. 2200kg ADVANTAGES – German-made – Not repainted - No electrical box – Used chipper, good condition, for inspection Net price: 38,900 PLN Net price: 9,260 EUR (depending on exchange rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 8007 TECHNICAL DATA - max. diameter of the main saw blade (without scoring saw) 400mm - max. diameter of the main saw blade (with scoring saw) 300mm - diameter of the saw blade arbor 30mm - max. cutting height for 400/300 saw blade, 120/70mm - spindle lock - main saw blade adjustable up/down and at an angle - saw blade guard - with side carriage - cutting length on the carriage 1600mm - cutting width with guide 1360mm - table dimensions 1100x1020mm Nwedpjy T Rhfjfx Acfsh - table dimensions with extension, including extension 2050x1850mm - with scoring saw - max. diameter of the scoring saw 100mm - diameter of the scoring saw spindle 22mm - scoring saw motor 0.55kW - 3 types of rotation speeds 2800, 4000, 5000 rpm - main motor 5.5kW - with brake - diameter of the dust extraction outlet 80, 120mm - dimensions (L/W/H) 2400x3350x1500mm - weight 870kg ADVANTAGES - Polish production - saw blade guard - with scoring saw - used saw, very good condition Net price: 11900 PLN Net price: 2833 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Technical specifications: maximum disc diameter 400 mm spindle diameter 30 mm disc guards 2 pieces manual blade extension saw units adjustable at an angle of 45° manual adjustment of the distance between the saw units minimum cutting length at 90° 300 mm maximum cutting length at 90° 3600 mm cutting width 200 mm Nwjdpfxozdf U Hs Acfjh cutting height at 90 degrees 100 mm pneumatic clamps 2 x 2 pieces control buttons material support 2 pieces main motor 2 x 1.1 kW diameter of the exhaust pipe 2 x 100 mm dimensions length/width/height 4200x1150x1600 mm weight approximately 500 kg Advantages: Italian production tilting saw units Includes: manual and parts list used saw, in very good condition

Condition: used, Year of construction: 2022, machine/vehicle number: 10492297, Manufacturer: Marel Model: PLT-400 Year: 2022 Condition: Used Serial Number: 10492297 Stock Number: 3190J Belt width: 400 mm Product thickness: 3 - 51 mm Belt speed: 0.36 - 24 m/min Compressed air: 0.7 l/min Power: 3 x 400V, 50Hz, 3kW Nwodpfx Acsyvtb Tjfjh Dimensions: 3300 x 1100 x 1500 mm Weight: 650 kg

Condition: used, Year of construction: 2007, cutting diameter 400 mm saw band length 4715 mm cutting width 1,3 mm main drive motor 7,5 kW Roller conveyor length 4000 mm Roller conveyor width 700 mm roll diameter - bore 150 mm total power requirement 14 KVA weight of the machine ca. 7,5 t Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Nwsdpfx Acozfqh Hsfsh apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2007, chuck outer diameter: 400 mm, through hole: 100 mm, Metal cutting Tooling ROHM - 400 MACH-ID 2994 Make: ROHM Type: 400 Year: 2007 Diameter: 400mm Nwodpszdilpofx Acfeh 4 chuck: x Spindle bore:100mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, machine/vehicle number: RZB00174, fuel type: diesel, motor manufacturer: C9.3B, General information Field of application: Construction Weights Empty weight: 2.300 kg Functional Generator capacity: 400 kVA Dimensions of cargo space: 266 x 112 x 177 cm CE mark: yes Other information Fuel consumption: 61 L/hr at 75% load Generator: SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Additional information Nedpfx Ajxxn N Ujcfjwh Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank

Condition: good (used), Wheel diameter 400 mm Cutting height 300 mm cutting width 380 mm Motor output 2,2 kW Table dimensions 600 x 450 mm machine weight ab. 242 kg Nwsdpozfqk Usfx Acfjh

Condition: good (used), Year of construction: 2009, functionality: fully functional, Control system: Siemens / ShopTurn Max. turning diameter: approx. 385 mm Max. turning length: approx. 650 mm Power supply: 400 V Frequency: 50/60 Hz Nsdszgvf Tjpfx Acfewh Power consumption: 21 kVA Max. current: 31 A CE: yes

Condition: used, Hydraulic CNC profiling and grooving machine LEISTRITZ, Type Polymat 50 / 400 CNC Machine No. 90, Year of manufacture 1990 Groove width max. 50 mm Working stroke max. 400 mm Maximum drawing force approx. 15.9 kN Groove depth feed rate 0 to 0.5 mm/stroke Cutting speed max. 20 m/min Nwodjzd Hiqopfx Acfoh Return stroke speed max. 40 m/min Table size 440 x 595 mm Number of T-slots 3 T-slot width 14 mm Working height - table height 1405 mm Hydraulic oil tank capacity approx. 150 liters Cutting oil tank capacity approx. 35 liters Motor power (hydraulics) 5.5 kW Mains connection 380 volts, 50 Hz - CNC control POLYMAT - Machining functions: Drawing - Automatic feed with shut-off - Hydraulic working stroke - Infinitely adjustable cutting speed - Oil lubrication - Hydraulic cylinder fitted with new sealing elements (2/2025) - Various accessories as shown Weight 1700 kg Space requirement L x W x H 1080 x 1400 x 1405 mm Good condition

Condition: used, Cylindrical Grinding Machine TSCHUDIN type HTG 400 Between points: 400 mm Nwedjzd Ui Eopfx Acfsh Centre height: 100 mm Cone: CM4 Spindle speed: from 70 to 500 RPM Max table travel: 420 mm Table orientation at 15° Grinding wheel: Ø 300 mm Retractable tailstock CM3 Machine rebuilt by REWITECH SA (Switzerland) in 1995 Equipped with one settling tank PHILIPS Voltage: 380 V Dimensions (L x W x H): 2000 x 1400 x 1600 mm Weight: approx 1,5 T

Condition: used, -Semi-automatic round or square dough dividers from €1,490 - Semi-automatic dough divider with square bowl, 20 divisions; price: €1,490 - Semi-automatic round dough divider, 20 divisions, brand: Lambert; price: €1,990 - Semi-automatic round dough divider, 20 divisions; price: €1,990 Nodpfx Acexvyymsfjwh - Semi-automatic dough divider, 24 divisions, brand: Bertrand Puma; price: €2,490 - Semi-automatic round dough divider, 24 divisions, brand: Bertrand Puma; price: €2,490 - Semi-automatic round dough divider, 20 divisions, brand: JAC; price: €2,490 - Semi-automatic square dough divider, 20 divisions, brand: PANIRECORD; price: €2,490 - Semi-automatic round dough divider, 20 divisions, brand: JAC; price: €2,500 - Semi-automatic round bowl dough divider, 20 divisions, brand: PANIRECORD; price: €2,500 - Semi-automatic hydraulic square dough divider JAC DIV 20, used, brand: JAC; price: €2,600 - Dough divider, 20 divisions, square DIVITRAD, brand: Bertrand Puma; price: €3,900