Used Deufra Asp 25 for sale (15,214)

Condition: used, functionality: fully functional, mileage: 34,000 km, power: 161.81 kW (220.00 HP), axle configuration: 4x4, fuel: diesel, Year of construction: 1995, Equipment: additional headlights, all wheel drive, trailer coupling, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer: Water Tank Firefighting Vehicle TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tank firefighting vehicles. With a squad crew and ample space for firefighting and rescue equipment, the vehicle is prepared for most operational scenarios. General Data: • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 HP (159 kW) • Diesel engine with manual transmission Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer Magirus Eurofire • TLF 16/25 body according to DIN standards • Three large lateral equipment compartments each side • Extendable steps for the front side equipment compartments • Brackets for standard equipment load • Mounts for 2 additional breathing apparatus • Roof compartment Fire Pump / Water Tank: • Magirus FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 2,600 l Firefighting Equipment: Rodpexk T Efefx Ad Ast • Fixed rapid action hose reel, 50 m, in upper compartment G6 Safety and Lighting: • 2 rotating beacons at the front and 1 at the rear • Pneumatic special signal system (Martin horn) • Rear-view camera • Hygiene board available on request We are happy to provide you with a specific offer and can present the vehicle to you in detail at our premises in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: used, functionality: fully functional, mileage: 15,000 km, power: 161.81 kW (220.00 HP), fuel type: diesel, fuel: diesel, color: red, Year of construction: 1993, Equipment: additional headlights, Tank Firefighting Vehicle TLF16/25 Chassis Mercedes Type 1222 Year of manufacture: 1993 Engine power: 220 HP (159 kW) Fuel: Diesel Transmission: Manual gearbox Drive: 4x4 Mileage: ≈ 15,000 km Water tank: 2,600 liters Cab Rjdpfewcykbox Ad Aet Crew cab RAL 3000 Flame Red Connector configuration: 12V/24V Superstructure Ziegler Roof: walkable, slip-resistant Roof box Rapid intervention hose Pump FPN 16/8 Ziegler Lighting Scene lighting Equipment compartment lighting Pump compartment lighting Cab lighting Roof lighting Additional spotlights Equipment Compartments Three equipment compartments per side (left and right) 1 pump compartment (rear) Generous storage space Secure mounting of load Special Signaling System 2 blue rotating beacons Front strobes on the hood Martinshorn siren system Additional Equipment Rapid intervention system > with 50 m form-stable hose Battery maintenance system Scene lighting Illuminated controls Reversing camera Hygiene board on request Further equipment available on request. Please contact us for more information. We look forward to your visit in Berlin. All details provided to the best of our knowledge, without guarantee for completeness or accuracy. This advertisement is for informational purposes only and does not constitute a binding offer. Subject to prior sale!

Condition: new, maximum load weight: 30,065 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,480 mm, loading space width: 2,354 mm, loading space height: 1,460 mm, loading space volume: 25 m³, Year of construction: 2025, Equipment: ABS, Available for purchase, rental, or lease with purchase option upon agreement! Schmitz Cargobull SKI 24 SL 7.2, approx. 25 m³ steel round body tipper with sliding tarpaulin – Also for Rent! ---- * Manufacturer: Schmitz Cargobull * Model: SKI 24 SL 7.2 – Steel round body tipper * First registration: – (NEW VEHICLE) * Colors: Body black RAL 9005, chassis Novagrau 7350, tarpaulin silver * Capacity: Internal body approx. 25 m³ (7.48m long x 2.354m wide x 1.46m high) * Gross vehicle weight: 36,000 kg * Unladen weight as per order confirmation: 5,935 kg * Payload: 30,065 kg * Axles: 3x SCB axles / 1st axle liftable / starting aid / disc brakes * Tyres: 385/65 R 22.5 on Speedline diamond ALLOY WHEELS * Suspension: Air suspension with lift/lower function * EBS * Overhanging pendulum tailgate with 2-hook locking and continuous seal plus additional catches * Floor 5 mm * Side walls 4 mm * Operator platform with access at front left Rjdpfx Aowa Ht Red Ast * Hard-chromed hydraulic cylinder * Sliding tarpaulin with central locking * 1x roof bow * Individual mudguards with rear spray flaps * Heavy-duty steel landing legs * Hydraulic hose holder * Paver brake with electro-pneumatic control * Folding underrun protection * Round tail lights * 2x rear LED reversing lights * LED side marker lights linked to indicators * 1x LED rear fog light * 1x towing coupling Available for purchase, rental, or lease with purchase option upon agreement! Note regarding possible errors in the advertisement: Despite careful preparation of this advertisement, occasional errors may occur in the text or specifications. We assume no liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: used, axle configuration: 3 axles, first registration: 06/2021, loading space volume: 25 m³, Year of construction: 2021, Equipment: ABS, Steel Tipper Body, 3 Axles Body length (inside): approx. 7,480 mm Body width (inside): approx. 2,354 mm Side wall height: approx. 1,460 mm Loading height (unladen at tipping body): approx. 2,995 mm Capacity: 24.6 m³ Wheelbase: 4,800 mm Tire size: 385/65R22.5 - EXTRA Light chassis frame 7.2, welded, high-tensile steel - Holder for broom and shovel - Axle spacing 1310/1310 mm - Upward folding underrun protection - 1st axle lift automatic/pneumatic, electric traction aid Rodpfjy Dyuiex Ad Ajt - Air suspension - Automatic lowering during tipping process - Load pressure gauge - LED lighting system, LED tail lights - SCB sliding tarpaulin cover, electric operation for inclined rear wall All information is provided without guarantee. Subject to errors and prior sale.

Year of construction: 2009, condition: good (used), Linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis, short-stroke linear axis, linear motion rail guide, linear table, positioning table -Manufacturer: RK Rose Krieger, Flat short-stroke linear axis for manual adjustment -Type: unfortunately without type designation -Travel: 25 mm Rsdpoxln T Hefx Ad Aot -Position indicator: Fiama OP3A -Number: 1x linear axis available -Dimensions: 315/135/H55 mm -Weight: 3.3 kg

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. Rjdpfxoiyynds Ad Aot More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Rodpfsd Sg Hrex Ad Ast Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. Rodpfoiyynwox Ad Aet More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: used, functionality: fully functional, machine/vehicle number: 62234, Year of construction: 2016, operating hours: 7,305 h, load capacity: 2,500 kg, lifting height: 3,300 mm, fuel type: gas, mast type: duplex, construction height: 2,145 mm, empty load weight: 3,960 kg, total length: 2,650 mm, drive type: Treibgas, construction width: 1,160 mm, LPG forklift truck Rjdpfxjw Dwg No Ad Ajt Chassis number: 62234 Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Normal Front tire size: 7.00-12 Front tire condition: 40 - 60% Rear tire size: 6.00-9 Rear tire condition: 40 - 60% Description: Machine fully workshop tested, cleaned, with new UVV (accident prevention inspection) and general inspection! Damaged paintwork can be retouched or filled to order. Side shifter, 3rd valve, rear work lights, front work lights, heater, load protection guard, full cabin, CE certificate, beacon, seat,

Condition: used, mileage: 8,523 km, power: 129 kW (175.39 HP), first registration: 01/2021, fuel type: diesel, empty load weight: 9,200 kg, maximum load weight: 8,800 kg, overall weight: 18,000 kg, fuel: diesel, color: white, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 9,290 mm, Year of construction: 2018, operating hours: 8,523 h, construction height: 2,760 mm, Equipment: ABS, trailer coupling, The vehicle has 48,718 km. We purchase or accept trade-ins of: - Vans - Forklifts - Commercial vehicles - Specialty vehicles - Fleets Very large selection of Iveco Daily, Volkswagen Caddy, and Volkswagen T5 from Deutsche Post. Other services: - Various loading options - Registration service Rjdpfx Aey Diybjd Aot - Delivery within Germany available for an additional fee You can view the vehicles without an appointment: Mon. – Fri.: 08:00 to 17:00 Sat.: 09:00 to 14:00 Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Phone: Email: For more information, visit We speak German / English / Russian / Italian / French / Spanish More Information Sales exclusively to professional customers (agriculture, freelancers, small and large businesses) or export. Subject to prior sale and errors.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: XMREUR00060000688, empty load weight: 23,800 kg, maximum load weight: 127,450 kg, overall weight: 151,250 kg, total length: 20,650 mm, total width: 3,180 mm, total height: 2,970 mm, tire size: 285170 R19.5., color: light grey, Year of construction: 2006, Fully functional Rjdpoylinmsfx Ad Aet

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 4,407 h, load capacity: 2,500 kg, lifting height: 3,670 mm, fuel type: diesel, mast type: telescopic, construction height: 2,460 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 4,262 kg, drive type: Diesel, Diesel Forklift Load center: 500 mm ISO Class: ISO Class 2 = 1,000 – 2,500 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for operation and fully functional Technical condition: Very good Rodpfsy Aqh Rox Ad Aet Front tires type: Superelastic Front tires size: 23x9-10 Rear tires type: Superelastic Rear tires size: 21x8-9 Description: In addition to this unit, we also offer a wide range of forklifts and warehouse equipment. All our machines are serviced and inspected according to FEM4.004 standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We are also happy to buy your used equipment — even if you do not purchase a vehicle from us. Leasing and financing options available on request at attractive terms. We are happy to provide you with professional and comprehensive advice on our vehicles. Side shifter, 3rd valve, rear working lights, front working lights, heating, soot filter, full cabin, CE certificate, safety light, interior mirror, joystick, beacon, wiper, single pedal, LED, seat.

Condition: used, functionality: fully functional, machine/vehicle number: 100023165, Year of construction: 2001, operating hours: 6,929 h, load capacity: 2,500 kg, lifting height: 5,000 mm, fuel type: gas, mast type: simplex, construction height: 3,150 mm, drive type: Treibgas, LPG Forklift Chassis number: 100023165 Mast type: Standard Redpfjydr E Sjx Ad Aet Condition: Ready for operation and fully functional Technical condition: Good Rear tire condition: 60-80% Description: For sale is an LPG forklift by Jungheinrich, model TFG 25. The vehicle is ready for use and fully functional. Both its technical and optical condition are good. With a load capacity of 2,500 kg, the forklift is suitable for a wide range of applications in warehousing, industry, and handling operations. The machine is equipped with a standard mast and offers a lifting height of 5,000 mm at a closed height of 3,150 mm. Year of manufacture: 2001, operating hours: 6,929. The forklift features a partial cabin that protects the operator from weather conditions and increases operating comfort. Tire condition front and rear: approx. 60–80%. The forklift is immediately available. Fast and hassle-free transport can be arranged by agreement. Errors and prior sale reserved. Sale is made without any warranty or guarantee. Side shift, 3rd valve, partial cabin.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,025 h, load capacity: 2,500 kg, lifting height: 6,000 mm, free lift: 2,025 mm, fuel type: gas, mast type: triplex, construction height: 2,595 mm, fork length: 1,200 mm, empty load weight: 3,560 kg, total length: 2,640 mm, drive type: Treibgas, construction width: 1,150 mm, LPG forklift Load centre: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tyres type: Superelastic Front tyres condition: 40 - 60% Rear tyres type: Superelastic Rear tyres condition: 80 - 100% Rodpoy A Acyefx Ad Aet Sideshift, 3rd valve, 4th valve, rear work lights, front work lights, overhead guard, windscreen, full free lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,095 h, load capacity: 2,500 kg, lifting height: 6,000 mm, free lift: 2,025 mm, fuel type: gas, mast type: triplex, construction height: 2,595 mm, fork length: 1,200 mm, empty load weight: 3,560 kg, total length: 2,640 mm, drive type: Treibgas, construction width: 1,150 mm, LPG forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tyre type: Superelastic Front tyres condition: 60 - 80% Rear tyre type: Superelastic Rear tyres condition: 80 - 100% Rjdpfx Aey A Acted Ast Sideshift, 3rd valve, 4th valve, rear work light, front work light, roof cover, windscreen, full free lift, CE certificate,

Condition: good (used), Year of construction: 1981, functionality: fully functional, Equipment: documentation/manual, Automatic channel baler BOA Continu 25 LB + conveyor belt. The baler is in good condition and has been regularly serviced. Recently, the Denison pump underwent a complete overhaul. Fully functional and in continuous operation. Please contact us for further information. Redew S Tv Uopfx Ad Aot

Condition: excellent (used), Catalogue number 7787 TECHNICAL SPECIFICATIONS - Tool diameter: 14mm - Maximum drilling depth: 170mm - Maximum milling length: 180mm - Adjustment of drilling apparatus front/rear - Table adjustment up/down and sideways Rsdpfxeyz I Dto Ad Aot - Table swivel angle: +/-20˚ - Working table dimensions: 620x280mm - Material clamping - Motor power: 1.5kW - Brake - Dimensions (L/W/H): 1070x660x1250mm - Weight: 300kg ADVANTAGES – Polish production – Very good condition – Used drilling machine Net price: 5900 PLN Net price: 1400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Clamping table area mm 250 x 1130 Working stroke: longitudinal mm 800 cross mm 350 vertical mm 450 Taper in spindle ISO 40 Redjy Enumjpfx Ad Aet Range of revolutions r.p.m. 45 - 4500 Number of revolutions steps 16 Main motor output kW 2,2/3,0 Total machine input kVA 4,0 Machine dimensions mm 2650 x 1980 x 2260 Machine weight kg 1760

Condition: excellent (used), Year of construction: 2013, Year of manufacture: 2013 Controls: Visual 2 (PLC, Parallel Subroutines) Additional I/Os in the robot rack: 7 inputs / 8 outputs + additional I/O card 16 inputs / 16 outputs Interface for communication with the injection molding machine: EUROMAP 12 (length 10 m) Conveyor Belt Control: YES Control cabinet: separately Documentation: YES Robot condition: very good Warranty: None X-axis travel: 3000 mm Y-axis travel: 700 mm Rodpfx Aoy Eyzxsd Ajt Z-axis travel: 1400 mm R1 pneumatic head rotation: 0° - 90° R2 pneumatic head rotation: 0° - 180° and 0° - 90° Workpiece gripping circuits: Number of digital vacuum (level control from the robot panel): 2 (can work as pressure) Number of pressure circuits: 4 Number of digital vacuum (level control from the robot panel): 2

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 4,767 h, load capacity: 2,500 kg, lifting height: 4,170 mm, load center: 500 mm, fuel type: diesel, mast type: simplex, construction height: 2,775 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 mm Mast type: Standard Condition: Refurbished without warranty Technical condition: very good Front tires type: Superelastic Front tires size: Factory new Front tires condition: New Rjdpfx Aoytyugod Aet Rear tires type: Superelastic Rear tires size: Factory new Rear tires condition: New Description: Overhauled, serviced and inspected in accordance with FEM 4.004 (UVV) // Completely repaired, serviced and checked Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, road-legal (StVZO), full cab, beacon, - Reversing camera with pedestrian detection - Hazard area marking

Condition: as good as new (ex-display), Hot water and steam high-pressure trailer, like new with 200 hours, complete with high- and low-pressure hoses, guns, lances, and nozzles. Rjdpfx Adoyvv Rke Ast

Condition: used, Multicar M25 Year of manufacture: 1986 -with water tank (water truck body) -with spreader body Rsdov Dwraopfx Ad Ast

Condition: used, mileage: 612,009 km, power: 375 kW (509.86 HP), first registration: 02/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: green, gearing type: semi-automatic, emission class: euro5, loading space length: 6,280 mm, loading space width: 2,480 mm, loading space height: 490 mm, Year of construction: 2007, Equipment: ABS, air conditioning, crane, parking heater, soot filter, Body: - Flatbed with aluminium drop sides - Internal dimensions: 6,280 mm x 2,480 mm x 490 mm - Raised front wall - Storage box - Lashing rails in the loading bed Crane: - Fassi F 660 AXP.25 loading crane from 2007 - Radio remote control - 4-point outrigger support Crane Outreach/Lifting Capacity (hydraulic): - 3.40 m = 16,000 kg - 4.30 m = 13,095 kg - 5.95 m = 9,500 kg - 7.70 m = 6,980 kg - 9.65 m = 5,440 kg - 11.70 m = 4,375 kg - 13.85 m = 3,640 kg - 16.10 m = 3,100 kg Equipment: - Cab: L (long) - Telligent transmission with clutch pedal - Air conditioning + auxiliary air conditioning - Auxiliary heating - Additional thermal insulation - Air horns on cab roof - Fuel tank: 590 L aluminium - Driver/co-driver air-suspended comfort seats incl. horizontal suspension - Sun visor Technology: - Audio system: Truckline CD 70 radio - Hands-free phone kit - Multifunction steering wheel - Electrically adjustable and heated exterior mirrors - Central locking with remote control - Cruise control - CB radio - Pull-out refrigerator - Reversing alarm (external warning signal) - Circuit breaker Rsdpfx Adjwq Ud Sj Aot - Rotating beacon left/right Safety & Environment: - Voith retarder - Telligent brake system with ABS + ASR - Rear axle differential lock - Emission standard EURO 5 Miscellaneous: - German first registration - 1 owner - Axle configuration: 6x4 + hydraulically steered trailing axle (NLA) - Engine 16.0 L - 375 kW V8 diesel (OM 502 LA) - Wheelbase 4,500 mm - Payload 6,675 kg according to registration - Gross vehicle weight 32,000 kg Vehicle and crane have been serviced regularly. Since 1972, your reliable partner for automobiles/commercial vehicles in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always has about 200 vehicles available, including vans, commercial vehicles, and construction machinery! We consistently offer attractive financing options at special rates. If interested, we will gladly provide you with an individual offer! Trade-ins for your commercial vehicle/construction machine are welcome. If a new technical inspection (TÜV) is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle by external partners is possible at an additional cost. All information in advertisements, on the internet, price tags and pictures are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for input or data transmission errors. Stated features are to be checked separately if required. Subject to errors and prior sale.

Condition: used, mileage: 612,009 km, power: 375 kW (509.86 HP), first registration: 02/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: green, gearing type: semi-automatic, emission class: euro5, loading space length: 6,280 mm, loading space width: 2,480 mm, loading space height: 490 mm, Year of construction: 2007, Equipment: ABS, air conditioning, crane, parking heater, soot filter, Body: - Flatbed with aluminium drop sides - Internal dimensions: 6,280 mm x 2,480 mm x 490 mm - Raised front wall - Storage box - Lashing rails in the loading bed Crane: - Fassi F 660 AXP.25 loading crane from 2007 - Radio remote control - 4-point outrigger support Crane Outreach/Lifting Capacity (hydraulic): - 3.40 m = 16,000 kg - 4.30 m = 13,095 kg - 5.95 m = 9,500 kg - 7.70 m = 6,980 kg - 9.65 m = 5,440 kg - 11.70 m = 4,375 kg - 13.85 m = 3,640 kg - 16.10 m = 3,100 kg Equipment: - Cab: L (long) - Telligent transmission with clutch pedal - Air conditioning + auxiliary air conditioning - Auxiliary heating - Additional thermal insulation - Air horns on cab roof - Fuel tank: 590 L aluminium - Driver/co-driver air-suspended comfort seats incl. horizontal suspension - Sun visor Technology: - Audio system: Truckline CD 70 radio - Hands-free phone kit - Multifunction steering wheel - Electrically adjustable and heated exterior mirrors - Central locking with remote control - Cruise control - CB radio - Pull-out refrigerator - Reversing alarm (external warning signal) - Circuit breaker - Rotating beacon left/right Safety & Environment: - Voith retarder - Telligent brake system with ABS + ASR - Rear axle differential lock - Emission standard EURO 5 Miscellaneous: - German first registration - 1 owner - Axle configuration: 6x4 + hydraulically steered trailing axle (NLA) - Engine 16.0 L - 375 kW V8 diesel (OM 502 LA) - Wheelbase 4,500 mm - Payload 6,675 kg according to registration - Gross vehicle weight 32,000 kg Redpewpbgqjfx Ad Ast Vehicle and crane have been serviced regularly. Since 1972, your reliable partner for automobiles/commercial vehicles in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always has about 200 vehicles available, including vans, commercial vehicles, and construction machinery! We consistently offer attractive financing options at special rates. If interested, we will gladly provide you with an individual offer! Trade-ins for your commercial vehicle/construction machine are welcome. If a new technical inspection (TÜV) is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle by external partners is possible at an additional cost. All information in advertisements, on the internet, price tags and pictures are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for input or data transmission errors. Stated features are to be checked separately if required. Subject to errors and prior sale.

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Rodpfox Twdyjx Ad Ast