Used Die Magnetprofis Pem1200 for sale (4,169)

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Lsdpjza E Rmefx Ammjhh

Year of construction: 2022, condition: new, Pressure: 400 t table length: 3000 mm table width: 2000 mm table load max .: 50 t distance between the work tables : min. 400 / max. 2800 mm top tool foldable: 180 degrees Dimensions L x W x H: 7600 × 5670 × 7850 mm Lhjdpjfn Efpjfx Ammoh Total weight (without operating materials): 85 t Motor power: 44 kW

Condition: ready for operation (used), Available directly from our warehouse in Son; Ljdoxz Niujpfx Ammshh heavy stamping die with electric coupling, electrical system completely renewed around 2019, original year of manufacture 1973; mechanically completely overhauled in 2015, moving die resurfaced, die and gear pins replaced with new pins with significantly higher mechanical strength than the originals, as well as the bronze bearings now made from material grade 2.1061 DIN 1705; this material is extremely wear-resistant with the addition of Pb (lead) for improved performance and good emergency running properties (i.e., no lubrication required), stamping plate 144 x 104 cm, thickness 5mm. Electrically upgraded with PILZ safety relays for each channel, motorized clamping of the stamping die. Safety bars have been extended and made more robust compared to the original design, 350 tons of pressure.

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour Lhjdpfxsx Ndu De Ammeh • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Pile Data Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min --- Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Year of construction: 1995, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1995 Lhsdpfxsb A Nc Hj Ammeh

Condition: used, Press brake lower tool, split die block, W x H approx. 260 x 190 mm, currently available Length 1 = 1700 mm Length 2 = 1000 mm Can be cut to size / shortened Lhedpjy Uxw Rofx Ammoh

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: M08E/9141, Offer Number: M08E/9141 Machinetype: 4 die - 4 blow transfer header Info: bushing cut-off Make: PELTZER-EHLERS Type: GB30-4 Constr. year: 1977 diameter range: 16 - 30mm number of dies: 4 number of stations (incl. cut off): 5 cutting length: 260 mm Ledpfoy Dc H Uox Ammshh shaft length under head: 225 mm output - pieces/min: 60-80 press power: 450 t Location: Europe

Condition: like new (used), Year of construction: 2017, operating hours: 9,830 h, The machine has not been used for several years so we want to sell it. Lodpfxowimu Hs Ammohh It is in very good condition.

Condition: excellent (used), Year of construction: 2002, Iberica JRK-105 Automatic Die Cutter Year – 2002 Maximum sheet size: 1050 x 750 mm Minimum sheet size: 400 x 350 mm Cardboard thickness up to 1.5 mm Corrugated board thickness up to 3 mm Clamping capacity: 9-17 mm Maximum speed: 8500 sheets/hour Maximum pressure: 300 t Stripping section Separation section Centerline 1 mm plate Lsdpfxey Uwzno Ammehh Micro-adjustment Double sorting unit

Condition: new, functionality: fully functional, - Single screw extruder - 25/25 LD screw - Motor: 2.2 kW - Wide slot die adapted 1.0 x 120 mm Ledpfx Amsrg Ebcsmshh - With cooling rollers (200 mm wide) - Winder / haul-off - Control system

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, controller model: Mitsubishi 32-bit EDM Steuerung, TECHNICAL DETAILS Travel range X-axis: 400 mm Travel range Y-axis: 300 mm Travel range Z-axis: 300 mm Max. workpiece size X: 700 mm Max. workpiece size Y: 500 mm Max. workpiece size Z: 250 mm Lhedpfx Amszapylemoh Max. electrode weight: 50 kg Max. workpiece weight: 500 kg Table size X: 550 mm Table size Y: 470 mm MACHINE DETAILS Control: Mitsubishi 32-bit EDM control Electrode changer: 20-position Generator: 50 A EQUIPMENT Lowerable container

Condition: excellent (used), functionality: fully functional, Despite its age, the machine is in like-new condition!!! For sale is a powerful wire erosion machine, model 600 ERCOCOM II, from Dieter Hansen, equipped with a Heidenhain control system. The machine is equipped with high-quality components and is particularly suitable for precise applications in tool and mold making. Features & Highlights: • Adaptimat with gap process monitoring – specifically for graphite machining to avoid arcing (New price alone approx. €13,000) • 16-position electrode changer for automated series machining • Erowa clamping system for precise and fast setup Ljdpoykq U Esfx Ammohh • 3D probe with carbide ball for accurate measurement • Cooling system (7 kW) • Integrated extraction system for fumes Some barrels with dielectric fluid are included! An inspection and functional test are possible by appointment. If you are interested, we look forward to hearing from you. The price includes packaging on the original heavy-duty pallet and loading onto your truck using a forklift.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, AGIECHARMILLES FORM 2000 HP WIRE EDM MACHINE, MANUFACTURED IN 2012 THERMAL STABILIZATION TRAVEL: X 400, Y 300, Z 350 MM EROWA UPC 320 WORKPIECE HOLDER WORK AREA DIMENSIONS: 900 x 630 x 350 MM LINEAR GUIDES AGIEVISION 5 GENERATOR ITS HEAD Ljdpfey Txk Iex Ammohh C-AXIS SUPERFINISH MODULE PREPARED FOR ROBOTIZATION

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, AGIECHARMILLES FORM 200 MS WIRE-CUT EDM MACHINE, MANUFACTURED IN 2012 TEMPERATURE-CONTROLLED TRAVEL: X 350, Y 250, Z 300 MM TABLE: 500 x 400 MM MAXIMUM PART DIMENSIONS: 790 x 530 x 275 MM TANK DIMENSIONS: 790 x 530 x 350 MM LINEAR GUIDES ISPG 80A GENERATOR ITS HEAD C-AXIS 16-ELECTRODE CHANGER / WITH MINI 32 SYSTEM Lhodpfey Txidsx Ammoh

Condition: used, Year of construction: 2001, Rotary die-cutting machine, model BRS-320-D20-U800, with accessories Production direction: right to left Strip infeed basket with strip guide Driven feed, lower roller driven Upper roller adjustable manually Internal lateral strip guides 2 rotary die-cutting heads, quick-change system, many adjustment options 4 rotary die-cutting stations, for changing Lhedpfx Aoy Szlxsmmoh Strip outfeed basket Scrap conveyor Wheel displacement for transferring material from the machine line to rollers Protective covers with safety interlocks Includes die-cutting tools Includes control system and operator panel Includes electrical documentation Includes original documentation All plug connections use Harting connectors This machine was used to punch C-rails and DIN rails from 2-3 mm sheet metal. It operated flawlessly in production at the customer's plant until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other applications.

Condition: used, Rotary punching machine, model BRS, with accessories Production direction: left to right Strip infeed basket with strip guide Driven feed, driven lower roller Upper roller adjustable manually Internal lateral strip guides 2 rotary punches, numerous adjustment options Strip outfeed basket Scrap conveyor belt Wheel displacement for transferring material out of the production line to rolls Lhedpfxjy Syivo Ammoh Protective covers with safety interlocks Including punching tools Including control system and operating panel Including electrical documentation The machine was used to punch C-rails and hat sections from 2 mm sheet metal. It operated flawlessly in the customer's production facility until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other equipment.

Condition: used, Year of construction: 2006, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 25 kg, We offer this used AGIE CHARMILLES + EROWA Roboform 350 + EROWA Robot Compact wire EDM machine, manufactured in 2006. Only approximately 9,500 generator hours! Manufacturer: AGIE CHARMILLES + EROWA Model: Roboform 350 + EROWA Robot Compact Year of manufacture: 2006 Lhjdpfxsy Tb Ayj Ammeh Condition: used Category ID: 1901 Type ID: 1429 Machine type: Wire EDM machine Details: Year of manufacture: 2006 Travel ranges: X/Y/Z 350 x 250 x 300 mm Minimum power consumption: 5 kVA Maximum electrode weight: 25 kg 44-position electrode changer Compact Accessories: Includes Erowa zero-point clamping system on the table WITHOUT electrode holders in the changer, but these can be purchased separately! If you have any questions or require further information, please send us a message or call us.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine Lhodsy Umkfopfx Ammsh The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: like new (used), Year of construction: 2019, operating hours: 2,607 h, functionality: fully functional, Equipment: documentation/manual, Selling a PEMTec PEM800 in like-new condition. Year of manufacture: 2019. The machine can be inspected and tested while powered on. Operating hours: 9880 PEM time: 2607 Pulse output current: 6000A HOW THE PROCESS WORKS Metal parts are processed in a contactless and precise manner using this process. An electrically conductive electrolyte, saltwater, is introduced between a negatively charged tool electrode (cathode) and a positively charged workpiece (anode). This carries the ionized material anodically away in the processing gap between the electrode and the workpiece. Ljdpsy Etcvjfx Ammjhh In this process, the electrode is mirrored onto the metal. The targeted current pulse, the oscillating tool electrode, and the very small working gap are the basis for the precision of the technology. The PECM process is an advanced version of electrochemical sinking. By using a synchronized current pulse and an oscillating tool electrode, PEMTec creates the basis for a very small processing gap. This allows for highly precise and economical manufacturing without process-related tool wear. Completely contactless and without thermal or mechanical influences, workpieces are produced with an accuracy and repeatability in the lower micrometer range and a surface finish of up to 0.03 μm. TECHNICAL DATA › Machine frame made of natural granite › Usable working area 375 - 545 mm (min./max.) › Machine table 660 × 540 mm (W × D) › Space requirement 2,200 × 2,560 × 2,870 mm (W × D × H), without electrolyte treatment › Maintenance-free, high-precision working axis with direct drive › Fixture mounting via 6 T-slot rails (M10) in the machine table › Real-time system for process control and short-circuit detection › HMI via a 21.5-inch touchscreen › Water-cooled, modularly designed generator from 1,200 A to 12,000 A › Automatic electrolyte treatment system › Optional XY adjustment aid and C-axis › The performance of the electrolyte system is optimally tailored to the respective application. Standard systems are available from 1,000 and 2,000 liters.

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Lsdpfx Amjwbvmismjhh Very good condition

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, Imperia F (120x165 cm) – fully overhauled New CE conformity declaration Weight: 11,000 kg Mechanical speed: 1,200 strokes/hour With hardened punch plate 50HRC New universal clamping frame New safety features in accordance with CE New electrical equipment New step protection mats Pneumatic brake and clutch system Mechanically completely overhauled Delivery time: 90 days Price: upon request Warranty: 6 months Image of a previously completed, fully overhauled Imperia F (120x165 cm) Lhedpfoy T H Hkox Ammoh

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine Lodehmmfkspfx Ammohh - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: used, Year of construction: 2004, Sinker EDM machine Lodpfeytrz Sex Ammohh Manufacturer: Exeron Type: 312 Year of manufacture: 2004 Control system: MF10 Travel ranges X/Y/Z: 450 x 300 x 300 mm Work table: 820 x 400 mm Working tank: 900 x 520 mm Distance table / quill: 150 / 450 mm Electrode weight max.: 30 / 150 kg Workpiece weight max.: 800 kg Filling level of working tank: 300 mm 20-position tool changer Generator current: 60 A Power connection: 400 V Three-phase current: 50 Hz Power consumption: 8 kVA Overall dimensions W/D/H approx.: 1,910 x 1,798 x 2,300 mm 3626

Year of construction: 2005, condition: like new (used), functionality: fully functional, machine/vehicle number: 053801204, Machine is meticulously maintained Has been operating in a greeting cards factory Comes with centre line system 2 x die cut chases 1 x embossing honeycomb if required Lhedpoyrnhxofx Ammsh Can be demonstrated on location, London Area, UK Available immediately

Condition: excellent (used), mileage: 1,088,000 km, power: 345 kW (469.07 HP), first registration: 06/2014, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,000 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2014, Equipment: ABS, AdBlue, air conditioning, cruise control, differential lock, electric window regulation, parking heater, power mirror, retarder, seat heater, spoiler, traction control, = Additional Options and Equipment = - 2 bunks - Aluminum fuel tank - Heated mirrors - Driver comfort seats - Roof spoiler - Differential lock - Differential lock - Speed limiter - Air conditioning - Refrigerator under bed - Air horns on cab roof - Multifunction steering wheel - Radio/CD player - Sleeper cab - Sun visor - Auxiliary heater (parking heater) - ZF intarder = Remarks = NICE & CLEAN CONDITION RENAULT T460 HIGH-ROOF 4x2 TRACTOR UNIT WITH I-SHIFT, RETARDER, 2x DIESEL TANKS & AIR CONDITIONING!! 460HP, EURO 6!! AUTOMATIC GEARBOX!! RETARDER!! COMPLETE SPOILER SET ON CABIN!! AIR CONDITIONING!! PARKING AIR CONDITIONING!! FRIDGE UNDER BED!! ETC!! NICE, CLEAN & GOOD DRIVING TRACTOR UNIT, READY FOR HEAVY TRANSPORT JOBS!! MORE RENAULT 4x2 / 6x2 / 6x4 / 8x2 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS AVAILABLE)!! SHIPMENT, TRANSIT REGISTRATION, LOADING, STACKING OR TRANSPORT?? NO PROBLEM FOR US, WE ARE AN "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) Ledoy Ru Ukopfx Ammjhh YOU CAN ALSO CHECK OUR WEBSITE; ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Transmission Gearbox: I-SHIFT AUTOMATIC, 12-speed automatic Axle Configuration Tyre size: 315/80R22.5 Brakes: Disc brakes Front axle: Max. axle load: 7,500 kg; Steering; Left tyre tread: 30%; Right tyre tread: 30%; Suspension: Leaf suspension Rear axle: Dual wheel; Differential lock; Max. axle load: 11,500 kg; Left inner tyre tread: 20%; Left outer tyre tread: 20%; Right inner tyre tread: 20%; Right outer tyre tread: 20%; Reduction: simple reduction; Suspension: Air suspension Weights Curb weight: 5,990 kg Payload: 13,010 kg Gross vehicle weight: 19,000 kg Functional Loading platform height: 115 cm Condition Technical condition: Very good Optical condition: Very good Further Information Contact our Sales Department for further details.