Used Dryers for sale (1,754)

Year of construction: 1997, condition: used, Control for UV dryer, UV lamp, UV high-performance lamp, infrared dryer, UV dryer system, UV surface lamp, UV painting system -Manufacturer: IST Metz, control for UV dryer lamp -Type: M-20-1-S-SS -UV tubes: type M 200 S 2 -UV range: 180-450mm Dkjdpfx Aksrd Acpomeu -Quantity: 4x controls available -Price per piece -Dimensions: 600/360/H600 mm -Weight: 77kg/piece

Condition: ready for operation (used), Year of construction: 1995, Used compressed air refrigeration dryer. Before being decommissioned, the refrigeration dryer was checked for functionality by a refrigeration technician. Subsequently, 18 kg of R22 refrigerant (2 bottles) were extracted and disposed of. All records are available. Afterward, a small amount of nitrogen was added. We can gladly have the dryer refilled with new refrigerant (e.g., R407C) for you. !! The selling price does not include refrigerant !! Manufacturer: Sabroe Model: SV 1010 AB Type: 50 A Dsdpefy Trhjfx Akmoku Max. flow rate: 55 m³/min (3340 m³/h) Pressure drop at max. flow rate: 0.38 bar Refrigerant weight: 18 kg (currently without refrigerant) Max. pressure, refrigerant side: 16/25 bar Air connection: DN 100 Condensate drain: Beko 2x 3/4 inch Max. pressure, compressed air side: 16 bar Max. flow rate Max. temperature: Compressed air: 60°C Power consumption with fans: 7.1 kW Voltage: 400 volts Dimensions (width/depth/height): 1880 mm / 1100 mm / 2000 mm Weight: 835 kg

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! Dodjfz U Hvopfx Akmeku The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: used, Year of construction: 2006, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 9,150 mm, inner dimension width: 1,900 mm, inner dimension height: 3,000 mm, number of chambers: 2, Drying chamber with trolleys on rails 2 trolleys dimensions: 2x 1900*3000*9150 Dkjdey Sbutjpfx Akmeu 2x 3kW fans Automatically controlled with adjustable drying programs

Condition: excellent (used), Year of construction: 2015, KHS INNOFILL DVD 40 CAN FILLING LINE MAX SPEED: 34,000 CPH 330ML IN 24 PACK WRAPAROUND CARTON CURRENT SPEED: 24,000- 28,000 CPH IN SMALL WRAPAROUND CARTON 4/6/8/10/12 PACKS LOCATION: UK STANDARD CAN 330ML & 440ML LID 202 SLEEK CHANGEPARTS FOR FILLING BLOC AVAILABLE GPI PACKER ADDED IN 2018 ROBOPAC PACKER ADDED IN 2022 EQUIPMENT LIST: FIPAL MINIDEPAL 20 LA DEPALLETISER • TWIN LANE RINSER • KHS INNOFILL CAN DVD 40 FILLING BLOC 34,000 CPH • FERRUM F6 6 HEAD SEAMER • CSW DEVENTER LID FEED SYSTEM • HEUFT SPECTRUM TX • EURO SISTEMI CAN DRYERS • TELEDYNE TAPTONE INSPECTION • ROBOPAC PRASMATIC TC400 COMPACT CASE PACKER • FT SYSTEM CP600 TP TUR300 Z200 RAS001 • GPI QUICKFLEX 300 MULTI-PACKER • HITACHI INK JET PRINTER • PACKITAL LANER • COMPLETE CONVEYOR SYSTEM • FIPAL PAL 80 F PALLETISER • ATLANTA STRETCH REVOLUTION LS STRETCH WRAPPER LOCATION: UK VIEWINGS BY APPOINTMENT WELCOME. Dsdpfx Astraaaskmeku PLEASE GET IN TOUCH TO ARRANGE AN INSPECTION. INDASSOL.COM

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 Dodpfxjz Dv Uye Akmjku - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Availability Immediately. Location: Serbia.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 0 h, PROD. BOGE TYPE SD40 S/N 31412 YEAR 1999 POWER (kW) 30+1.10 CAPACITY (m3/min) 4.30 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 17000 / 51100 FREQUENCY CONVERTER no BUILT-IN DRYER yes HEAT EXCHANGER no COOLED BY (AIR/WATER) air Dedpfsz E Hhtox Akmjku ON TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: excellent (used), Year of construction: 2008, PROD. KAESER TYPE BSD72 S/N 1909 YEAR 2008 POWER (kW) 37 CAPACITY (m3/min) 7 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED (AIR/WATER) air Dodsz E Hb Tepfx Akmjku ON TANK no DOCUMENTS no

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, color channels: CMYK, number of print heads: 2, We are offering this used Mimaki TxF300-75 DTF roll-to-roll printing machine and the accompanying Adkins dryer with powdering unit. Dsdpszn Iqqefx Akmoku Year of manufacture: 2024 Condition: Ready for use / currently still in operation. Otherwise, please see the photos. We also have other machines of the same design available. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2020, pressure (max.): 10 bar, noise level: 68 dB, Double-piston compressor with dryer Brand: KAESER Model: KCT 401-100 Year: 2020 Type: Double-piston and oil-free (dry-running) Pressure: 10 Bar Flow rate: 275 Liters/min. Power: 2.4KW (3.2Hp) Tank: 100 Liters Sound level: 68dB Djdpez E R Dxofx Akmeku Three-phase 380V - Suitable for continuous use: Unlike conventional piston compressors, the KCT series compressor blocks from Kaeser are designed for a 100% duty cycle. - Typical applications: Dentistry, laboratories, pharmaceutical sector, medical technology, food packaging, and the electronics industry where completely clean air is required according to ISO 8573-1 Class 0 standard. Air dryer: - Brand: Kaeser - Model: TAH7 KRYOSEC - Single-phase 220V - Flow rate: 600 Liters/min. - Environmentally friendly refrigerant: R-513A - Weight: 24Kg - Plate heat exchanger: Made of stainless steel with low pressure drop. - Integrated condensate drain: Equipped with an electronic condensate drain ECO-DRAIN as standard (does not lose compressed air during discharge). - Hot gas regulation: Prevents internal freezing when the unit operates at low air load.

Condition: used, Year of construction: 1998, operating hours: 120,000 h, functionality: fully functional, machine/vehicle number: S97125901, power: 200 kW (271.92 HP), volume flow: 34.1 m³/h, pressure (max.): 7.5 bar, type of cooling: air, Atlas Copco ZT 200 – oil-free rotary tooth compressor including MD 600 dryer For sale is a well-maintained and fully functional compressed air system consisting of an Atlas Copco ZT 200 compressor and an Atlas Copco MD 600 dryer. The system comes from a professional industrial application and was maintained, inspected, and serviced there exclusively with original Atlas Copco maintenance parts, as specified by the manufacturer. The condition is good for its age; the system is operational and fully functional. Technical data – Compressor – Atlas Copco ZT 200 Dkedpsz E U Smsfx Akmsu Design: oil-free rotary tooth compressor Type: ZT 200 Power: 200 kW Max. operating pressure: 7.5 bar Operating hours: approx. 120,000 h Speed: 1,495 rpm Year of manufacture: 1998 Serial number: S97125901 Manufacturer: Atlas Copco Airpower, Belgium Control: Atlas Copco Elektronikon Drum dryer – Atlas Copco MD 600 Type: MD 600 Atlas Copco control with SMARTLINK Year of manufacture: 2023 Operating hours: approx. 4,300 h Serial number: 605608 Art.-No.: 170-016733 Manufacturer: Atlas Copco Airpower, Belgium The compressor and the dryer are part of the offer and will only be sold together. Condition: used, in good condition for its age, technically well-maintained, regularly serviced and inspected, fully functional. Inspection possible by arrangement. Further technical documents or information available upon request.

Condition: excellent (used), functionality: fully functional, AUTOMATIC EDGE BANDER machine model STEFANI MONOBETA 4000 second hand machine with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , thin solid wood strips for furniture, furnishings, kitchens, bathrooms, doors, panels and various XILIA positioner system technical data : tiltable gluing group: 0° / 7° min. height of gluing panel mm.10 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.25 min. panel width mm.60 min. panel length mm.110 adjustable feed speed: from 8 to 22 mt./min. Dkodpfx Akjwlzz Temsu electric press lift telescopic support for large panels soundproof cabin composition : 1. gluing group with glue tank 2. pressure rollers 3. edge feeder 4. end-cutting unit for front and rear vertical cutting of the excess edge - n.2 motors 0,44 Kw at 12000 rpm 5. trimming unit with overlapping motors for trimming the upper and lower part of the excess edge - n.2 motors of 0.55 Kw at 12000 rpm supplied, in addition, n.02 tilting trimming and cornering groups. n.2 motors Kw 1,15 at 12000 rpm 6. glue scraper group for cleaning glue residues supplied with 2 glue scraper groups, as spare parts 7. overlapping brush group for brushing and polishing the applied edges - n.2 motors at 1400 rpm , tiltable 8. dryer unit 0-600° - 1400 watt 9. contour trimming unit model STEFANI TRIM/60 . external unit HF high frequency converter volt. 380/50

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 250 h, functionality: fully functional, As-new drying chamber, fully functional, immediately available Djdpfx Akoy Ny U Tsmjku

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Heidelberg CX 75 - 4 + L – 2018 Dedpfoz E N A Tsx Akmjku Year of Manufacture : 2018 Impression Count : 55 mio imp. 4 colors + coater offset press of size 53 x 75 cm (C-Size) equipped with: • PRINECT PRESS CENTER • EASYCONTROL (Color Measurement System) • AUTOPLATE (automatic plate change) • SPEED : 15.000 Sheets Per Hour • COATING UNIT with chambered doctor blade and Anilox Roller • High Pile Delivery • Infra-Red Dryer • Preset Feeder & Delivery (automatic Size Setting) • ALCOLOR dampening with VARIO • Technotrans Central Refrigeration CombiStar • Ink Temperature Control • ALL Automatic washers (blanket, rollers and impression cylinders) • Steel Plate in feeder and delivery (for pallets) • Chromed cylinders • Antistatic Device • Pneumatic compressor • Weko AP 262 Powder Spray • Air Cooled machine • Can print up to 0,8 mm This machine is in excellent condition and is available immediately. It can be seen running in one Print Shop in Germany

Condition: used, Year of construction: 1985, year of last overhaul: 2008, CLEARANCE SALE 'FIRST COME - FIRST SERVE BASIS' ; IMMEDIATE SHIPPING POSSIBLE STORK RD4 Textile Rotary Printing Machine – 8 / 12 Colors – 1850 mm – Used / Overhauled Make: Stork Model/Type: RD-IV Number of colors: 8 ( possible 12) Working width: 1850 mm Year of manufacture: 1985 Condition: Renewed / major overhaul completed in 2008, later preserved Dsdpjy A S Ryefx Akmjku Heating system: Steam Included equipment: Fluff remover: Stork SU-II / 1850 Dryer: 6-chamber dryer Suitable for textile rotary printing operations requiring reliable multi-color production. MACHINE IS REFURBISHED , PROFESSIONALLY MARKED, DISMANTLED, STORED IN MILL-FLOOR - VIDEO AVAILABLE For more information, technical details, photos, or video , please get in touch. Shipping possible immediately.

Condition: used, Year of construction: 1993, 1500 mm tank diameter / tank height 1500 / 500 mm turning speed range 1500 U/min voltage 380 V volumn 300 Liter Dkedpjxq Hg Aofx Akmou power requirement 18 kW weight of the machine ca. 1,2 t dimensions 1,5 x 1,6 x 1,6 m Vibration dryer See ??pictures

Condition: used, mileage: 608,100 km, power: 220 kW (299.12 HP), first registration: 01/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,500 mm, loading space width: 2,450 mm, loading space height: 2,400 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, * Special equipment: * Refrigerated box body by STS * Movable partition wall Dkodpfx Aksxafgtsmou * Aluminium floor * Two lashing rails each on right and left * Thermoking T1000 R electric/diesel refrigeration unit * Night power socket incl. cable for reefer power supply * BÄR tail lift with 2 t lifting capacity * Leather steering wheel * Lane keeping assist * Stability control assist * Attention assist * Active Brake Assist 5 * Adaptive cruise control * Reversing camera * Air conditioning * Low engine tunnel storage compartment * Over-windscreen storage with lid * Comfort package * 220 Ah battery * 24V/100 A electrical preparation in cab * 12-speed PowerShift transmission * Manual roof hatch (steel) * Heated fuel filter * 390 litre aluminium fuel tank * Enhanced engine brake * Reinforced engine compartment encapsulation * Wheelbase variant 5500 mm * Rear overhang 2400 mm * Acoustic reverse warning system (external sounder) * Tail lift control switch * Additional remote key * Fleet management system interface * Circuit breaker * 12V / 15A socket in passenger footwell * 24V socket in passenger footwell * Camera preparation * Additional water heater * Further equipment: * Emission standard EURO 6 * Front axle 8.0 t * Heated front-view mirror * Two-line trailer brake system * Tyres (front axle): 385/55R22.5 12/12 mm tread * Tyres (rear axle): 315/70R22.5 12-14 mm tread * Spare wheel * 24V / 15-pin trailer socket * Exhaust outlet to vehicle centre * Batteries positioned side by side * Rear axle differential lock * Compressed air connection in cab * Air unit with condensate monitoring * Driver assistance system: Attention Assist (fatigue sensor) * Driver assistance system: Autonomous emergency braking (Active Brake Assist) * Driver assistance system: Lane Keeping Assist * ClassicSpace cab, 2.30 m wide, 320 mm tunnel * Vehicle contour marker lights, LED * Suspension: leaf/air * Electric windows * Tinted windscreen * AdBlue tank: 60 litres * Central locking system * Air intake at front * Two-stage air compressor * Heated air dryer * Engine: 7.7 litre – 220 kW inline 6-cylinder diesel (OM 936) * Kerb view mirror * Disc brakes front and rear axles * Remote control key * LED flashing side marker lights * Cab seats: functional passenger seat * Front mudguards * 12V socket in passenger footwell * Tachograph / EU control device * Toll pre-equipment * Front axle drop type * Gross vehicle weight 18.00 t * and much more. * Subject to error, change and prior sale.

Condition: used, mileage: 108,300 km, power: 220 kW (299.12 HP), first registration: 11/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, tail-lift, * Special equipment: * TK box body by Kiesling, year 2020 * Rear portal doors * Cold curtain * Aluminum floor * Two lashing rails each on the right and left * Transverse load securing bar * Thermoking T 600R electric/diesel refrigeration unit * Night power supply socket including cable for refrigeration unit power hookup * BÄR 1.5 t tuck-away tail lift * Leather steering wheel * Turn assist * Lane keeping assist * Stability control assist * Attention assist * Active Brake Assist 5 * Predictive Powertrain Control (PPC) * Navigation system * Automatic climate control * Bi-Xenon headlights * Low engine tunnel storage compartment * Overhead storage above the windscreen with cover * Comfort package Dksdsxafgyepfx Akmeu * Visibility package * 220 Ah battery * CB radio * Interactive multimedia cockpit * 2 air horns on cab roof * Electrical pre-wiring in cab, 24V / 100A * Driving assistance system: Turn assist * 12-speed gearbox, type G 211-12 * Manual (steel) lifting roof * Heated fuel filter * 390 L aluminum fuel tank, left * Reinforced engine brake * Reinforced engine compartment encapsulation * Wheelbase version 5,500 mm * Rear overhang 2,400 mm * Smoker package * Acoustic reversing warning (external sounder) * Tail lift control switch * Additional remote control key * Fleet management system interface * Circuit breaker * Exterior sun visor * 12V / 15A socket in passenger footwell * 24V socket in passenger footwell * Preparation for 4 surround cameras (display in onboard monitor) * Preparation for auxiliary headlights * Preparation for coolbox/refrigerator * Additional heater (water) * Further equipment: * Emission standard EURO 6 d * Front axle 8.0 t * Actros 5 * Heated front mirror * Trailer brake, 2-line * Connections on the left * Trailer socket 24V / 15-pin * Exhaust outlet centered under vehicle * Batteries arranged side by side, rear axle differential lock * Compressed air connection in cab * Compressed air unit with condensate monitoring * Automatic headlight activation (light sensor) * Driving assistance system: Attention Assist (fatigue detection sensor) * Driving assistance system: Autonomous Emergency Brake Assist (Active Brake Assist 5) * Driving assistance system: Lane keeping assist * ClassicSpace, 2.30 m, tunnel 320 mm * LED outline marker lights * Full air suspension front and rear * Electric windows * Tinted windscreen * Urea (AdBlue) tank: 60 L * Central locking with comfort function * Front air intake * Two-stage air compressor * Heated air dryer * Engine 7.7 L – 220 kW inline-6 diesel (OM 936) * Ramp mirror * Disc brakes on front and rear axles * Remote control key * Flashing LED side marker lights * Cab seats: multifunction passenger seat * Front wheel splash guards * 12V socket in passenger footwell * Tachograph / EU control device * Truck Data Center 7 (fleet management system) front * Preparation for toll collection * Preparation for Truck Data Center (fleet management system) * Drop front axle * Gross vehicle weight 18.00 t * Tyres: 315/60R22.5 * and much more. * Subject to errors, changes and prior sale.

Condition: used, mileage: 808,110 km, power: 210 kW (285.52 HP), first registration: 04/2009, fuel type: diesel, number of seats: 38, gearing type: automatic, next inspection (TÜV): 04/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle subject to final sale, errors, typos, and prior sale: Mercedes Benz Citaro (emergency seats) Dsdpfx Aoz H Eb Uekmoku (Vehicle 128) First registration: 02.04.2009 808,110 km Engine: 6,374 ccm 210 KW / 286 HP Bluetec 5 Inspection due: 04/2027, TÜV (technical inspection) due: 10/2027 Permissible gross vehicle weight: 19,000 kg, unladen weight: 10,750 kg, payload: 8,250 kg Overall length: 12,000 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front approx. 80/60%, rear driven axle approx. 80/80%, rear non-driven axle approx. 70/70% Double doors at the front and rear Driver's cab with door Ramp Fully automatic transmission Microwave Electric windows 2 x electric + heated mirrors Auxiliary heating + 2nd heater Retarder Station brake LAWO Mobitec ICU 402 38 + 2 emergency seats + 60 standing places + 1 wheelchair space Emergency exit 12-volt socket Chassis components rusted 08.01.2024: Retarder solenoid valve new, 16.01.2024: Drain valve + air dryer cartridge new, 22.01.2024: Pressure regulator + drain valve line new, 22.04.2024: 4-way valve, pressure regulator solenoid valve new, 26.06.2024: Pressure regulator + air dryer cartridge replaced, 04.12.2024: Axle modulator new, 14.10.2024: Front axle, right side, new shock absorber, 25.04.2025: AT transmission at 751,660 km, 15.05.2025: Axle modulator new, 14.07.2025: Rear axle, right and left, upper stabilizer bar new, 23.04.2026: Water box new, 4-way valve new, pressure regulator adjusted Various signs of wear, consistent with age Last inspection at 751,660 km on 25.04.2025, next inspection at 811,660 km Price: €5,000.00 (net) All information provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the District Court of Ludwigslust; for disputes exceeding this amount, it is the Regional Court of Schwerin. Subject to errors, typos, and prior sale.

Condition: used, mileage: 419,200 km, power: 175 kW (237.93 HP), first registration: 06/2013, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro5, total width: 2,600 mm, total height: 3,780 mm, Year of construction: 2013, Equipment: air conditioning, parking heater, tail-lift, * Mercedes Benz 1824 L AXOR with multi-chamber refrigerated box body, Carrier Supra 950 - BÄR LBW 2. * Diesel - Engine displacement: 6,374 cc - 175 kW / 240 hp - Euro 5 - Green emissions sticker - * Body dimensions: Length 7,700 mm x Width 2,600 mm x Height 2,330 mm and 2,100 mm interior height - Wheelbase: 4,900 mm - * 2 seats - Automatic transmission - Air conditioning - Suspension: leaf / air - Tow hitch (only drawbar coupling) - Axle configuration: 4x2 * Retarder - Permissible total weight: 18,000 kg - Unladen weight: 10,550 kg - Payload: 7,450 kg - * Truck 1: 1824 L - Registration date / Mileage: 400,500 - VIN: WDB 9505361L652633 - 144 - 2,330 mm interior height Dkodpfezd Irasx Akmou * Truck 2: 1824 L - Registration date / Mileage: 513,750 - VIN: WDB 9505361L752647 - 116 - 2,100 mm interior height * Truck 3: 1824 L - Registration date / Mileage: 422,750 - VIN: WDB 9505361L756551 - 119 - 2,330 mm interior height * Truck 4: 1824 L - Registration date / Mileage: 419,250 - VIN: WDB 9505361B980262 - 151 - 2,330 mm interior height * Vehicles are immediately available and ready for collection - Vehicles are not labeled - * Please schedule an appointment for viewing - Price is per vehicle - * Contact: Mr. Andreas Vogel * The information provided on the internet is a non-binding description. * It does not constitute guaranteed characteristics. * The seller is not liable for typing or data transmission errors. * Subject to change, errors and prior sale. Special equipment: Wheel bolt cover, storage compartment on engine tunnel, trailer coupling: drawbar coupling, audio system: CD radio, battery 220 Ah, compressed air tank aluminum, cab: comfort suspension (1.8 HZ), cab version: S (short with extended rear wall), generator 100 A, graphic info display with eco meter, rear lights for mounting tail lift, air dryer 1 chamber heated, spare wheel jack side-mounted, switch tail lift, circuit breaker, seats in cab: driver's seat comfort suspension seat incl. horizontal suspension, voltage converter 24V / 12V 15 A, steel rims 9.00x22.5, 12-volt socket, cab socket 24V, front underrun protection, preparation for cool box / refrigerator, preparation for telephone / fax, front axle dropped, thermal protection glazing, auxiliary heater (air) Additional equipment: Emission standard EURO 5, axle configuration: 4x2, axle load front axle 7.5 t, exterior mirrors electrically adjustable and heated, exterior mirror electrically adjustable, left, outside temperature gauge, long-distance cab, roof hatch (steel), differential lock rear axle, cab: S (short), suspension: leaf / air, power windows, gearbox 6-speed - type: G 85-6, urea tank (AdBlue): 95 liters, rear axle H 6, crown wheel 440, interior filter: pollen filter, body / structure: chassis, fuel tank: 210 liters plastic, model update Axor 2, engine 6.4 liters - 175 kW diesel (OM 906 LA), engine start / stop system, engine brake with constant throttle, spare wheel under frame end, disc brakes, seats in cab: passenger single seat, fixed, stabilizer rear axle, stabilizer front axle, Telligent brake system with ABS + ASR, rear underrun protection fixed, immobilizer, permissible total weight 18.00 t

Condition: excellent (used), Year of construction: 2001, I sell the 2-head 4-lamp UV-drying tunnel Cefla Ecolight TLF/BB/4+TTE 4000 Year 2001 Working width 1400mm. Total length 4,00m Total power 74,3 kW Very good condition, available immediately. Dkedpfxoi Eup Ee Akmsu

Condition: excellent (used), Year of construction: 2002, I sell the 2-head 2-lamp UV-drying tunnel Cefla TLE/B/2+TTE 2500 Year 2002 Working width 1400mm. Total length 2,50m 2 Lamps HG 120 W + HG 120 W Total power 37,7 kW Dksdpfst S Efgjx Akmsu Very good condition, available immediately.

Condition: used, mileage: 434,511 km, power: 335 kW (455.47 HP), first registration: 02/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 02/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, parking heater, * Municipal vehicle * Sun visor * ABS * ASR * On-board computer * Cruise control * Hill start assist * Electric windows * Electrically adjustable mirrors * Mirror heating Dedjzup Ukepfx Akmeku * Central locking * Fog lights * Sunroof * Driver comfort seat * Seat heating * Differential lock, rear axle * Rotating beacon, orange * Air dryer * Driver airbag * Radio * Auxiliary heater * Cool box * Rear view camera * Lift/steerable axle * Air intake on top * Trailer coupling * 2-line air connection * Duomatik air connection * Hydraulic connection for trailer * 12-speed * Suspension: Air * Payload: 10450 * Continuous brake: Retarder ----Superstructure: Müller VACUMASTER F140 EKGH suction unit (year of manufacture 2012) with flushing system, GGVS/ADR for class AT + FL, next tank inspection acc. to ADR 02/27, tank material S355J2+N, tiltable, tank volume: 13,800 liters (water chamber 1,155 liters), extension piston, hydraulic tailgate, floor control + remote control, hydraulic hose reel at the rear left 80 m / DN 13, CVS vacuum pump VacuStar W 1300 R (1,240 m³/h), high-pressure pump Speck P45/60-160 (57 ltr/min, 160 bar). Hydraulic connections for trailer operation. Recorded operating hours: vacuum pump: 3,309 h, HD pump: 403 h----ADR class FL incl. EX/II, EX/III + AT Sale only to commercial businesses. IN THE CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE, INCLUDING EQUIPMENT + ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, sales discussions are our general terms and conditions (see imprint for details).

Condition: excellent (used), Year of construction: 2015, KAESER SX 8T screw compressor with air dryer, after service. Technical data: capacity: 0.68 m3/min (680/min); engine power: 5.5 kW; Dkedpeyt H Sfsfx Akmou pressure: 11 bar; operating hours: 7890 h; year: 2015. The compressor is in full working order. We provide service support. Below is a link to a video showing the machine in operation.

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) Djdpfx Aszg Dx Uokmeku - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.