Used Dwm Copeland D6Dh3-3500-Awm/D for sale (47,950)

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with the rear * 9-ton Valx axles with disc brakes Ø 430 mm * Rims ET 120 Rjdpfeyq Ufusx Amgecb * Automatic lift axle on the first axle, * Operable via a switch on the chassis, or by actuating the service brake three times * With traction support, load increase on the 2nd and 3rd axle up to 130% below 30 km/h * Lifting / lowering controlled by the EBS modulator * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres as per manufacturer’s choice, with tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized container guides at the front * Upper side of the frame spray galvanized * Paintwork: 1 coat, 2K RAL 9005, matte * 15-pin connector * Flashing side marker lamps * Multichamber rear lights

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers (overall length >16.5m, 2 wheelbases) * Compatible with 40 ft (2 wheelbases), 30 ft, 2 x 20 ft, and 20 ft rear-flush containers * 9-ton Valx axles with Ø 430 mm disc brakes * ET 120 offset rims * Automatic lift axle on the first axle, operable via a switch on the chassis or by pressing the service brake three times * Start assist: Axle load distribution to the 2nd and 3rd axles up to 130% below 30 km/h * Lifting/lowering controlled by EBS modulator * Tire size: 385/55 R22.5 * Fifth wheel height: 1,100 mm * Branded tires as per manufacturer's choice, with tire pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Upper frame surface hot-dip zinc sprayed * Coating: 1-coat 2K RAL 9005, matt * 15-pin connector Rcjdpfx Ajyq Ufzomgsb * Flashing side marker lights * Multi-compartment tail lights

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with rear * 9-tonne Valx axles with disc brakes Ø 430 mm * Rims offset ET 120 * Automatic lift axle on the first axle * Operable via a switch on the chassis or by pressing the service brake three times * With traction aid, load on 2nd and 3rd axle up to 130% under 30 km/h * Raise/lower via EBS modulator control * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres at manufacturer’s discretion, tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Frame top edge hot-dip galvanized * Paint: 1 layer, 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights * Multi-chamber tail lights Rodpfx Aeyq Ufnomgecb

Condition: ready for operation (used), Year of construction: 2012, total width: 4,650 mm, total height: 1,660 mm, product length (max.): 15,000 mm, table load: 1,000 kg, number of axes: 3, This 3-axis ESAB Combirex DX3500 Oxy was manufactured in 2012. It features a cutting area of 2,700 x 12,950 mm and a maximum material thickness of 125 mm. The machine is equipped with an ESAB Precision Plasma M3 Gen 2 generator and a CNC Vision 51 control system. If you are looking to get high-quality plasma cutting capabilities, consider the ESAB Combirex DX3500 Oxy plasma cutting machine we have for sale. Contact us for further details. • Table size: 2,500 x 13,000 mm • Cutting area: 2,700 x 12,950 mm • Table height: 700 mm • Max material thickness: 125 mm • Plasma generator: ESAB Precision Plasma M3 Gen 2, 360 A Rcedpjyrf Szofx Amgeb • Plasma torch: PT 36 • Gas torch: Cool Jet (1 unit) • Control system: CNC Vision 51 • Power supply: Machine 1 x 230 V 50 Hz; Plasma 3 x 400 V 50 Hz • Operating hours: • Plasma torch: 2,795 h • Gas torch: 1,979 h • Gantry and drive: • High-performance cutting gantry • Linear control, AC motor drives, double-sided rack and pinion • Positioning speed max. 24,000 mm/min • Continuous gantry position monitoring • Plasma and gas cutting: • Plasma gases: Technical air, N₂, O₂, H35 • Max piercing: 40 mm (CS/SS/Al) • Cutting speed (CS): 12 mm – 4,200 mm/min; 25 mm – 2,000 mm/min; 38 mm – 1,000 mm/min • Automatic piercing, capacitive height control • HF start system • Cutting quality: ISO 9013 Class 3 • Protection and environment: • Dust protection: IP54 • Relative humidity: 10–85% (no condensation) • Dimensions and installation: • Cutting table: 17-section Additional equipment • Filter unit: ECO 16 CT (extraction/filtration)

Condition: used, axle configuration: 3 axles, first registration: 06/2005, color: other, Year of construction: 2004, Empty weight: 5.300 kg Axle 1: left 10 mm right 10 mm Redpfeym Aimjx Amgscb Axle 2: left 8 mm right 8 mm Axle 3: left8 mm righ 8 mm We have the possibility to stack trailers!

Year of construction: 2022, condition: used, functionality: unexamined, machine/vehicle number: S352621, S352622, S352623, Deburring system consisting of: 3 robot cells, each equipped with a KUKA robot KR10 1440-2 and deburring spindles, 3 safety enclosures with loading doors (one per robot), 1 hydraulic unit for clamping systems, 3 hydraulic clamping systems. For further details on condition and technical specifications, please refer to the attached appraisal report. Redpfjyqycxox Amgjcb

Condition: excellent (used), first registration: 10/2023, wheelbase: 7,630 mm, color: silver, Year of construction: 2023, Unladen weight: 7,490 kg Payload: 22,510 kg Gross vehicle weight: 30,000 kg Loading platform height: 110 cm APK (Technical Inspection): valid until 11/2026 Technical condition: very good Rcodpfx Amoylk H Rsgob Optical condition: very good A&D 2-AXLE SPECIAL SEMITRAILER FOR CRANE TRUCK 2 axles, air suspension TRIDEC steered rear axle SAF axle Chassis fully hot-dip galvanized Aluminium sideboards Low bed height: 110 cm Neck length: 403.5 cm Loading platform length: 636.5 cm Hardwood floor, 28 mm Tyres: 265/55 R 19.5 We have 2 identical, unused semitrailers in stock.

Condition: excellent (used), first registration: 10/2023, wheelbase: 7,630 mm, color: white, Year of construction: 2023, Unladen weight: 7,490 kg Payload: 22,510 kg Gross Vehicle Weight: 30,000 kg Loading platform height: 110 cm Redpfsylk Hkox Amgocb Technical condition: very good Visual condition: very good A&D 2-AXLE SPECIAL SEMI-TRAILER FOR CRANE TRUCK 2 axles with air suspension TRIDEC steered rear axle SAF axle Chassis fully hot-dip galvanized Aluminium side walls Lowbed height: 110 cm Neck length: 403.5 cm Loading platform length: 636.5 cm Hardwood floor: 28 mm Tyres: 265/55 R 19.5 We have 2 identical, unused semi-trailers in stock

Condition: excellent (used), functionality: fully functional, mileage: 1,035,000 km, power: 426.59 kW (580.00 HP), first registration: 03/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: intarder, color: blue, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, airbag, navigation system, onboard computer, parking heater, spoiler, MAN TGX 18.580 D 38 Full-Air - First registration: 03/2019 - Mileage: 1,035,000 km - Retarder: Intarder - ADR AT - Stationary air conditioning - Navigation system - LED headlights - Double fuel tank - Double bunk - Tyres: 50% CUSTOMIZED FINANCING OR LEASING SOLUTIONS AVAILABLE ON SITE. FROM 24 UP TO 96 MONTHLY INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OUR GROUP’S OTHER LOCATIONS: Rjdpfx Amewgy H Rogecb DOMENICO TRUCK SRL, NAPLES LOCATION DOMENICO ESPOSITO S.P.A., EBOLI (SA) LOCATION – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30-19:00 / SATURDAY 8:30-14:00 WE OFFER A WIDE SELECTION OF USED MULTIBRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – DAF – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – MAN - Nissan V8 - Intarder - 770s - Limited Edition - 660 S Semi-trailer – Refrigerated semi-trailer – Tipper – Lamberet – Schmitz – Isuzu – Fixed platform – Crane – Tipper – 4 axle – 4 rear axle – Tway – T-Way – 540 – 460 HP – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition – Curtainsider – Box – Tail-lift – Refrigerated cell – Insulated with fridge – Van Domenico Truck srl declines all liability for any discrepancies in technical specifications, optional equipment and features which may occasionally differ from those shown in the description. We invite you to verify the features of the specific vehicle.

Condition: new, empty load weight: 950 kg, maximum load weight: 2,550 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 5,420 mm, loading space width: 2,090 mm, color: silver, construction height: 1,000 mm, working width: 2,150 mm, Hydraulics, automatic reverse drive, drive-on ramp, full aluminium floor / tiltable loading area / electric winch / wheel stop bracket / spare wheel, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. full aluminium floor / tiltable loading area / electric winch / wheel stop bracket / spare wheel Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 950 kg - Payload: 2,550 kg - Interior dimensions: 542 x 209 x 0 cm (L x W x H) - Overall exterior dimensions: 725 x 215 x 100 cm (LxWxH) - Loading sill height: 66 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - Floor: full aluminium floor! - Drop sides: without - Drop side height: 0cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes - Hydraulics: manual hydraulics - Drive-on angle: - Wheel stop: adjustable wheel stop bar - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Lashing eyes: 12 pieces in the floor (750kg/pc) - Winch: yes - Electric with adjustable winch bracket - Supports: Support at the rear - Ramps: not necessary, drive-on wedges mounted on the vehicle - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Aluminum floor - Extremely robust - 1 sliding wheel stop bracket - Very stable welded steel frame - Tiltable loading area by means of hand hydraulics + 2 lifting cylinders - Frame cpl. frame completely hot-dip galvanized - many stable cross beams therefore high point load - additional longitudinal struts continuously welded in - 14 lashing eyes inside the loading area, rubber-coated (750kg/each) - automatic reverse drive - ALKO overrun device and parking brake - ALKO coupling head - very stable V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing lights plug - reversing lights - large dimensioned safety lighting - LED rear lights - integrated rear fog light - swivel lighting - automatic center support wheel - spare wheel mounted under loading area - registration papers: COC papers Incl. optional equipment: - cable winch, electric, adjustable left & right, as well as adjustable in length - incl. 12V battery for cable winch 12V battery for cable winch - weather protection cover for cable winch Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - anti-theft device - tarpaulin body - fixed box body - drop sides - additional wheel stoppers - storage box - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Rcodpfxou Hrzfj Amgeb

Condition: new, empty load weight: 890 kg, maximum load weight: 2,610 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,600 mm, loading space width: 1,800 mm, loading space height: 950 mm, loading space volume: 6.5 m³, color: silver, construction height: 1,750 mm, working width: 1,920 mm, Leaf grate attachment / E-hydraulics / Ramp shaft / High front grille, Automatic reverse drive, Hot-dip galvanizing, Roof window, * IMMEDIATELY AVAILABLE * incl. Leaf grate attachment / E-hydraulics / Ramp shaft / High front grille TECHNICAL DATA - Make: Debon - Vehicle type: Three-way tipper - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 360 x 180 x 95 cm - External dimensions (L x W x H): 500 x 192 x 175 cm - Loading height of floor: 68 cm - Perm. Gross vehicle weight: 3,500 kg - Unladen weight: 890 kg - Payload: 2.610 kg - Chassis: High loader (wheels under the body) - Tyres: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, can be retrofitted EQUIPMENT - Brake: Yes - Number of axles: 2 - Floor: Galvanized steel plate on Finnish wooden multiplex plate - Drop sides: Anodized aluminium, double-walled double-walled - Dropside height: 35 cm - Dropside folding: 4-sided - Dropside removable: 4-sided - Dropside hinges: 3 lateral / 2 front+rear, screwed - Corner stanchions removable: Yes, all removable - Locks: Eccentric locks - Swing tailgate: No - Number of pallet spaces: 5 - Multifunctional vehicle: No - Tipping / lowering function: Can be tipped on three sides - Hydraulic pump: Electric pump - Number of cylinder stages: 5-stage - Tipping angle (R/S): 45 - Battery charging function: via. Charging function battery: via charging socket with optional charger - Overrun device/brake: KNOTT - Frame/chassis: welded steel frame - Galvanization: hot-dip galvanized - Drawbar: V-drawbar, continuous, C-profile - Mudguards: plastic mudguards - Superstructures / attachments: Grid attachment - Ramp shaft: Yes - Ramps/ramp flap: Optional - Ramp type: - - Ramp load: - - Drive-on angle: - - Supports: Optional, can be retrofitted - Lashing eyes: 8 - Rear lighting: bulbs, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: COC papers DESCRIPTION - Anodized aluminium drop sides double-walled - Drop sides foldable at the side and rear - Drop sides removable - Steel plate on wooden floor in Finnish quality - E-hydraulics with battery - H-frame removable at the front - Ramp shaft pre-equipped - Sturdy welded steel frame - Frame compl. hot-dip galvanized - hot-dip galvanized leaf grate - original Debon - 3-sided swinging - can be dismantled without tools - height: 60 cm - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 8 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large rear lights Plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - emergency hand pump - side wall attachment - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Ste Redpfxeu Hr N Nj Amgscb

Condition: new, empty load weight: 614 kg, maximum load weight: 2,886 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 2,800 mm, loading space width: 1,300 mm, loading space height: 200 mm, loading space volume: 0.7 m³, color: silver, construction height: 1,970 mm, working width: 1,790 mm, Automatic reverse drive, hot-dip galvanizing, extremely sturdy superstructure, perforated lashing floor, LED lighting, e-wheel, bucket storage, * IMMEDIATELY AVAILABLE * extremely sturdy superstructure / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 280 x 130 x 20 cm - External dimensions (LxWxH): 465 x 179 x 197 cm - Loading height of floor: 38 cm - Perm. Gross weight: 3,500 kg - Unladen weight: 614 kg - Payload: 2.886 kg - Chassis: Low loader (wheels next to the body) - Tyres: 165R13C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame with anti-slip profile hot-dip galvanized - chassis with two additional longitudinal beams under the loading area - perforated steel single ramps, galvanized steel, adjustable, L=1.62m - stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, Rubber buffer dampens noise - Very low chassis for low drive-on angle - Excavator bucket storage - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar RENFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - Reversing lights - Integrated rear fog light - Robust protection for rear lights - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - TracStrap load securing system - excavator bucket cage - lashing straps - storage box - winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Rcsdpfx Amju Hrg Uegjb

Condition: new, empty load weight: 781 kg, maximum load weight: 2,719 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,200 mm, loading space width: 1,700 mm, loading space height: 200 mm, loading space volume: 1.1 m³, color: silver, construction height: 1,970 mm, working width: 2,320 mm, Automatic reverse drive, hot-dip galvanizing, TracStrap load securing, heavy-duty ramp, extremely robust body, perforated lashing floor, LED lighting, e-wheel, bucket tray, * IMMEDIATELY AVAILABLE * incl. TracStrap load securing / heavy-duty ramp / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 320 x 170 x 20 cm - External dimensions (LxWxH): 512 x 232 x 197 cm - Loading height of floor: 40 cm - Perm. Total weight: 3,500 kg - Unladen weight: 781 kg - Payload: 2.719 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areaheavy-duty perforated steel ramp, galvanized steel, with spring support (heavy-duty) - stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber bumper dampens noise - very low chassis for low drive-on angle - excavator bucket rest - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - free choice of lashing points when lashing in the perforated steel floor - TracStrap Kit (Heavy-Duty), TÜV-certified load securing system - Revolutionary system - First-class securing of tracked vehicles - Ready for departure within a very short time - Front wedges are adjustable and form the basis for form-fit load securing - 2x lashing straps (LC 5000 daN) for lashing over the chains - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar REINFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Excavator bucket cage - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. Rcjdpfeu Hrhlsx Amgsb

Condition: new, empty load weight: 731 kg, maximum load weight: 2,769 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,200 mm, loading space width: 1,700 mm, loading space height: 200 mm, loading space volume: 1.1 m³, color: silver, construction height: 1,970 mm, working width: 2,320 mm, Automatic reverse drive, Hot-dip galvanizing, Heavy-duty ramp, Extremely robust body, Hole lashing floor, LED lighting, E-wheel, Bucket storage, * IMMEDIATELY AVAILABLE * Heavy-duty ramp / Extremely robust body / Hole lashing floor / LED lighting / E-wheel / Bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 320 x 170 x 20 cm - External dimensions (LxWxH): 512 x 232 x 197 cm - Loading height of floor: 40 cm - Perm. Total weight: 3,500 kg - Unladen weight: 731 kg - Payload: 2.769 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areaheavy-duty perforated steel ramp, galvanized steel, with spring support (heavy-duty) - stable ACME locking system: Closes silently, loading ramps are held in place by safety clamp locks, Rubber bumper dampens noise - Very low chassis for low drive-on angle - Excavator bucket storage - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar RENFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - TracStrap load securing system - excavator bucket cage - lashing straps - storage box - winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Rsdpfx Amou Hrkmogocb

Condition: new, empty load weight: 826 kg, maximum load weight: 2,674 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,700 mm, loading space width: 1,700 mm, loading space height: 200 mm, loading space volume: 1.3 m³, color: silver, construction height: 1,970 mm, working width: 2,320 mm, Automatic reverse drive, hot-dip galvanized, incl. TracStrap load securing / heavy-duty ramp / extremely robust construction / perforated lashing floor / LED lighting / e-wheel / bucket tray, * IMMEDIATELY AVAILABLE * incl. TracStrap load securing / heavy-duty ramp / extremely robust construction / perforated lashing floor / LED lighting / e-wheel / bucket tray, * INCL. TracStrap load securing / heavy-duty ramp / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 370 x 170 x 20 cm - External dimensions (LxWxH): 562 x 232 x 197 cm - Floor loading height: 40 cm - Perm. Gross weight: 3,500 kg - Unladen weight: 826 kg - Payload: 2.674 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame with non-slip perforated profile Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areaheavy-duty perforated steel ramp, galvanized steel, with spring support (heavy-duty) - stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber bumper dampens noise - very low chassis for low drive-on angle - excavator bucket rest - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - TracStrap Kit (Heavy-Duty), TÜV-certified load securing system - Revolutionary system - First-class securing of tracked vehicles - Ready to drive off within a very short time - Front wedges are adjustable and form the basis for form-fit load securing - 2x lashing straps (LC 5000 daN) for lashing over the chains - Free choice of lashing points for lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the dropside for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar REINFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Excavator bucket cage - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. Rodju Hrlwopfx Amgscb

Condition: new, empty load weight: 840 kg, maximum load weight: 2,660 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,000 mm, loading space width: 1,800 mm, loading space height: 340 mm, loading space volume: 2.2 m³, color: silver, construction height: 1,670 mm, working width: 2,400 mm, Automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability:* IMMEDIATELY AVAILABLE * - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 3,500 kg - Unladen weight: 840 kg - Payload: 2.660 kg - internal dimensions: 400 x 180 x 34 cm (L x W x H) - loading sill height: 35 cm - tires: 195/50R13C steel rim - brakes: yes - support wheel: yes, automatic - incl. vehicle documents (letter) Equipment: - continuous steel mudguards can be walked on - very stable welded steel frame - waterproof glued 18mm thick screen-printed floor - loading area height only approx. 35cm - maintenance-free rubber spring axles from KNOTT - KNOTT overrun device and parking brake - automatic reverse - very low chassis for low drive-on angle - V-drawbar with support for the excavator shovel - spare wheel storage under the excavator shovel storage (without e-wheel) - sturdy steel side walls approx. 34cm high - galvanized chassis - solid loading ramp, approx. 132cm long, with gas spring support - stable rear support integrated in the loading ramp (automatic support when the ramp is open) - 10x lashing eyelets on the side - lighting recessed in the rear frame - front marker lights - support wheel with holder in the middle - 13-pin plug - reversing light - integrated rear fog light - incl. transfer costs - incl. vehicle papers/COC papers We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair workshop for over 30 years - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Rjdpfx Asu Hrk Hsmgjcb

Condition: new, empty load weight: 800 kg, maximum load weight: 2,700 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,300 mm, loading space width: 1,860 mm, loading space height: 350 mm, loading space volume: 2.5 m³, color: black, construction height: 1,630 mm, working width: 1,920 mm, Electro-hydraulics with emergency hand pump / ramp shaft / high front grille, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. electro-hydraulics with emergency hand pump / ramp shaft / high front grille TECHNICAL DATA - Make: Debon - Model: PW3.3 - Vehicle type: Three-way tipper - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 330 x 186 x 35 cm - External dimensions (L x W x H): 467 x 192 x 163 cm - Loading height of floor: 68 cm - Gross vehicle weight: 3.500 kg - Unladen weight: 800 kg - Payload: 2.700 kg - Chassis: High loader (wheels under the body) - Tires: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, retrofittable DESCRIPTION - Black anodized double-walled aluminium drop sides - Side and rear drop sides foldable - Removable drop sides - Steel plate on wooden floor in Finnish quality - E-hydraulics with battery and emergency hand pump - Removable front H-frame - Ramp shaft pre-equipped - Sturdy welded steel frame - Frame compl. hot-dip galvanized - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 8 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large reversing lights Plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Rjdpou Htzaofx Amgscb

Condition: new, empty load weight: 870 kg, maximum load weight: 2,630 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,300 mm, loading space width: 1,860 mm, loading space height: 350 mm, loading space volume: 2.5 m³, color: black, construction height: 1,630 mm, working width: 1,920 mm, Drive-on ramps / rear supports / electro-hydraulics with emergency hand pump / ramp shaft / high front grille, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. drive-on ramps / rear supports / electro-hydraulics with emergency hand pump / ramp shaft / high front grille TECHNICAL DATA - Make: Debon - Model: PW3.3 - Vehicle type: Three-way tipper - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 330 x 186 x 35 cm - External dimensions (L x W x H): 467 x 192 x 163 cm - Loading height of floor: 68 cm - Gross vehicle weight: 3,500 kg - Unladen weight: 870 kg - Payload: 2.630 kg - Chassis: High loader (wheels under the body) - Tyres: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, retrofittable DESCRIPTION - Black anodized double-walled aluminium drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Steel plate on wooden floor in Finnish quality - E-hydraulics with battery and emergency hand pump - Removable front H-frame - Ramp shaft pre-equipped - 2x aluminium ramps for tipper - 2x folding heavy-duty support leg, telescopic - Sturdy welded steel frame - Frame compl. hot-dip galvanized - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 8 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large reversing lights Plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle Accessories can be retrofitted - please enquire: - 100 km/h approval with shock absorbers - side wall attachment - 60 cm corrugated grid attachment - spare wheel - storage box - battery - 230 V charger - flat tarpaulin - net hooks - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Redpfx Amou Htz Hogjcb

Condition: new, empty load weight: 995 kg, maximum load weight: 2,505 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 6,000 mm, loading space width: 2,410 mm, color: black, construction height: 800 mm, working width: 2,430 mm, Automatic reverse drive, Drive-on ramp, Tiltable loading area, Hot-dip galvanizing, Multifunctional trailer / Ramp shaft / Preparation for tipping function / Hole lashing floor, * IMMEDIATELY AVAILABLE * Multifunctional trailer / Ramp shaft / Preparation for tipping function / Hole lashing floor TECHNICAL DATA - Make: Brian James - Model: Connect 476 - Vehicle type: High loader - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 600 x 241 x 0 cm - External dimensions (L x W x H): 770 x 243 x 80 cm - Loading height of floor: 65 cm - Perm. Total weight: 3,500 kg - Unladen weight: 995 kg - Payload: 2,505 kg - Chassis: High loader (wheels under the body) - Tyres: 195/60R12C - Chassis: ALKO rubber suspension axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Most adaptable multifunctional trailer for commercial goods and vehicle transport of all kinds. - Every available option can be flexibly attached or detached and thus enables customization for almost any application - Perforated steel lashing floor in combination with 18 mm multiplex floor offers high slip resistance and is extremely wear-resistant, even under the toughest operating conditions. - Can be plugged in at all 4 corners for drop sides, tarpaulin frames, drop side attachments or front wall elevation - Vehicle can also be fitted with all options after purchase: enormous potential for retrofitting: hydraulic tipping functions, winches, ramps etc. can be retrofitted at any time. can be retrofitted at any time - very sturdy welded steel frame - contact edge for drive-on ramps can be moved for different track widths - numerous lashing points punched directly into the frame enable professional load securing - integrated ramp shafts for easy retrofitting of drive-on ramps - side panels color: black - frame cpl. Sturdy net hooks under the loading area - Spare wheel mounted on the drawbar for easy access - Automatic reversing - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very stable V-drawbar REINFORCED - 13-pin plug - Reversing lights - Large LED safety lighting - Complete LED lighting: Extremely bright, durable and reliable. - dynamic LED indicators are clearly visible even in bad weather - robust protection for the rear lights - integrated rear fog light - various front, side and rear marker lights - heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Tipping function - Ramps - Supports - Storage box - Drop sides - Drive-on flap - Winches - Attachments New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Rodju Htutepfx Amgjcb

Condition: new, empty load weight: 1,100 kg, maximum load weight: 2,400 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 5,090 mm, loading space width: 2,060 mm, loading space height: 2,060 mm, loading space volume: 22.5 m³, color: black, construction height: 2,420 mm, working width: 2,320 mm, Hydraulics, automatic reverse drive, hot-dip galvanized, unbraked, incl. aluminium body / side door / 100km/h / tailgate hinged door, * IMMEDIATELY AVAILABLE * incl. aluminium body / side door / 100km/h / tailgate hinged door Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY - Gross vehicle weight: 3.500kg - Unladen weight: 1,100 kg - Payload: 2,400 kg - Interior dimensions: 509 x 206 x 206 cm (L x W x H) - Overall exterior dimensions: 622 x 232 x 242 cm (L x W x H) - Loading sill height: 35 cm - Brake: yes - Support wheel: yes - Automatic - 100km/h: included! - incl. vehicle documents Vehicle body: - Floor: Anodized aluminium floor made of web profiles - Side walls/body: Aluminium anodized double-walled - Roof material: Full polyester - Chassis: Pullman2 independent suspension with coil spring and shock absorber - Number of lashing eyes: 8 pieces - Tailgate: Yes - Tailgate material: Aluminium anti-slip, approx. 1000kg load capacity - Tailgate function: Hinged door and tailgate combination - Interior light: Yes, with switch - Supports: at an extra charge - Overrun device & brakes: Incl. Frame/chassis: Welded hot-dip galvanized steel frame - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Double-walled and anodized aluminium side walls - Anodized aluminium floor - Lockable front right side door, approx. 127x60cm - Full poly roof and front - Rear load-through dimension: approx. 178x181 cm (W x H) - Inside width between the wheel arches: approx. 193 cm (W x H) - Drive-on flap made of aluminum with optional lock lockable - Drive-on flap as flap / door system (can be used as flap or door) - Reinforced substructure for drive-on flap - Lashing eyes mounted on floor - Interior light - Torsion-resistant chassis - Stable cross members thus high point load - PULLMAN2 chassis Independent wheel suspension with trailing arm, coil spring and shock absorber lowered with very low centre of gravity and galvanized - 100km/h with manufacturer's certificate - automatic reversing - Knott overrun device and parking brake - sturdy V-drawbar - plastic mudguards - 13-pin plug - reversing light - large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - automatic center support wheel - body only splash-proof - registration papers: COC papers Accessories can be retrofitted - please enquire: - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - slotted-hole rails for lashing straps & locking beams - bar strip with rubber coating for lashing straps & locking beams - steel or aluminum locking beams - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Redpsu Htntjfx Amgocb

Condition: new, empty load weight: 858 kg, maximum load weight: 2,642 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 2,200 mm, loading space volume: 18 m³, color: grey, construction height: 3,040 mm, working width: 2,060 mm, Hydraulics, automatic reversing, hot-dip galvanized, unbraked, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: Immediately available - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 3.500 kg - Unladen weight: 858 kg - Payload: 2,642 kg - Interior dimensions: 405 x 200 x 220 cm (L x W x H) - Exterior dimensions: 561 x 206 x 304 cm (L x W x H) - Loading sill height: 64 cm - Tires: 195/50R13C - Brakes: yes - Support wheel: yes, automatic - Incl. vehicle documents (letter) - 100 km/h: Included! Standard equipment: - Designed side wall hinges for very easy attachment of a cargo net - 30 cm high aluminum side walls with robust built-in locks - Hinged front wall. Tethering hooks on the chassis. - U-profile at the rear for easier attachment of the ramps, - double-walled anodized aluminium drop sides - all drop sides foldable and removable - removable steel corner stanchions - multiplex wooden floor with anti-slip surface - very sturdy welded steel frame - frame completely hot-dip galvanized - many cross members for high point loading - additional longitudinal struts welded in throughout - all cross and longitudinal members rest on the floor - 8 lashing brackets recessed inside the side edge (1000DaN/kg) TÜV certified! - Automatic reverse drive - KNOTT overrun device and parking brake - Sturdy eccentric locks - Reinforced, sturdy bolted V-drawbar - 13-pin plug - Large safety lighting - Lighting recessed in rear frame, integrated rear fog light - Automatic support wheel in the middle Special equipment included in the price: - Low chassis 195/50R13C - Parabolic suspension incl. shock absorber for 100km/h fitted instead of rubber-sprung axles - Parabolic suspension axle with shock absorber for absolute driving comfort! - PLane and bows 220cm interior height - Truck tarpaulin quality with water drainage on the roof - Sliding tarpaulin on the left in the direction of travel - Fitted tarpaulin incl. skid locks New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Rjdpju Htt Njfx Amgocb

Condition: new, empty load weight: 596 kg, maximum load weight: 2,904 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,620 mm, loading space height: 230 mm, loading space volume: 1 m³, color: silver, construction height: 1,500 mm, working width: 2,080 mm, Automatic reverse drive, drive-on ramps, hot-dip galvanizing, 18 mm floor plate, parabolic suspension, sloping rear, *INSTANTLY AVAILABLE * incl. 18 mm floor plate / parabolic suspension / drive-on ramps / sloping rear Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 596 kg - Payload: 2,904 kg - Interior dimensions: 300 x 162 x 23 cm (L x W x H) - Overall exterior dimensions: 482 x 208 x 150 cm (LxWxH) - Loading sill height: approx. 33 cm - Tires: 12 inch - Brake: yes - Support wheel: yes, automatic - 100 km/h: optional - Incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: 18 mm screen printing plate - Drop sides: solid steel drop sides - Drop side height: 23 cm - Chassis: KNOTT parabolic suspension - Tipping function: no - Hydraulics: - - Drive-on angle: approx. 22 - Overrun device & brake: KNOTT - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: no - Lashing eyes: 8 pieces on the side edge (1000kg/daN) - Supports: integrated in ramps - Ramps: 2x standing on shaft 1500kg loadable - Plug lighting: 13-pin - Approval: COC papers Standard equipment: - Welded side wall/frame construction made of sheet steel, hot-dip galvanized - Very stable bolted V-drawbar REINFORCED - Side walls 23cm high - Hot-dip galvanized steel ramps, upright - Very stable welded steel frame - Solid walk-on steel mudguards - Frame cpl. Parabolic spring axles (leaf spring suspension) - Beavertrail rear / low drive-on for working platforms and excavators - Many stable cross beams for high point loading - Lashing rings mounted in the outer frame 8 pieces (4 pairs), tensile force 1000 kg per lashing ring - Automatic reverse drive - KNOTT overrun device and parking brake - Sturdy locks for ramps - 13-pin plug - Reversing lights - Large, sturdy lashing rings plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - rear side position lights - automatic center support wheel - registration papers: COC papers Accessories can be retrofitted - please enquire: - 100 km/h approval - bucket tray - spare wheel - storage box - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Rsdou Hriispfx Amgscb

Condition: new, empty load weight: 1,140 kg, maximum load weight: 2,360 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,260 mm, loading space width: 2,040 mm, loading space height: 350 mm, loading space volume: 3.4 m³, color: silver, construction height: 1,200 mm, working width: 2,210 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, electric pump / full steel floor, * IMMEDIATELY AVAILABLE * incl. electric pump / full steel floor Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 1,140 kg - Payload: 2,360 kg - Interior dimensions: 426 x 204 x 35 cm (L x W x H) - Overall exterior dimensions: 575 x 221 x 120 cm (L x W x H) - Loading sill height: 78 cm - Tyres: 185R14C steel rims - Brake: yes - Support wheel: yes - 100 km/h: at extra charge - incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Drop sides: anodized aluminium double-walled, 4x folding & removable - Drop side height: 35cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes, three-sided - Hydraulics: electro-hydraulic pump - Tipping angle: approx. 45 - Steps hydraulic cylinder: 4 steps - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: at extra charge Surcharge - Lashing eyes: 18 pieces per 1500kg - Supports: Surcharge - Ramps: Surcharge Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics - Hollow profile construction welded and completely hot-dip galvanized - Ramp shaft with tensioning device under the loading area including folding license plate holder With maintenance support - Anodized double-walled aluminium drop sides - Drop sides foldable on 4 sides - Drop sides removable - Rear drop side mounted on pendulum bearings - Full steel floor - Extremely robust - Very stable welded steel frame - Frame completely hot-dip galvanized - Many options available. Frame completely hot-dip galvanized - Many sturdy cross members for high point loading - Additional longitudinal struts welded in throughout - Spinlock® load securing system - 18 lashing pins mounted recessed in the steel floor, tensile force per lashing pin up to 1.500 kg - When recessed, the lashing pins can be used as a lashing option under the loading area with the aid of a belt loop - Electro-hydraulic pump - including integrated charger - Pumpless emergency pump incl. socket wrench insert - Automatic reverse - ALKO overrun device and parking brake - Sturdy tension locks - Very sturdy V-drawbar REINFORCED - 13-pin plug - Large reversing lights - Large reversing lights - Very sturdy V-drawbar - Very sturdy V-drawbar REINFORCED - 13-pin plug - Large reversing lights - Large reversing lights - Large reversing lights - Large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg - Premium maneuvering handle with tensioning strap retractor - registration documents: ZBII and COC papers Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - rear supports - ramps - flat tarpaulin - net hooks - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for o Rcodou Hr Ryjpfx Amgjb

Condition: new, incl. tiltable – enclosed loading platform with perforated tracks / driving onto without ramps / central aluminium chequer plate floor Technical data: • Brand: Martz • Model: GT KIPPBAR 580/3 3.5T • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: None • TÜV/roadworthiness: 2 years from initial registration • Internal dimensions (LxWxH): 565 x 209 x 0 cm • External dimensions (LxWxH): 785 x 215 x 103 cm • Permissible total weight: 3,500 kg • Unladen weight: 953 kg • Payload: 2,547 kg • Chassis: Flatbed (wheels located under body) • Tyres: 195/55R10C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, retrofittable DESCRIPTION • Perforated steel tracks, ideal for secure lashing, certified to VDI 2700 Sheet 8.1 • Centrally between the tracks: anti-slip and waterproof aluminium chequer plate floor • Incl. continuous drive-on loading platform in wedge shape at rear • Hydraulically tiltable platform (11° approach angle) • Ultra-low chassis for reduced loading angle • Very lightweight trailer in robust construction • Additional 6x lashing rings integrated in the side floor Rsdpfxsx Tbkdo Amgocb • Manual cable winch at front with deflection roller for 3 positions • Braked KNOTT rubber torsion axles • Reverse automatic coupling • KNOTT overrun brake and parking brake • Reinforced, very sturdy bolted V-drawbar • 13-pin plug • Reversing lights • Large, heavy-duty safety lighting, pivotable • Integrated rear fog lamp • Lane marking lights mounted at the rear • Fold-down, drive-over number plate holder • Automatic jockey wheel fitted Optional accessories (upon request): • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Toolbox • Reversing lights • Lashing straps • ...and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available - All prices incl. VAT - Vehicle registration document can be sent in advance or temporary plates for transfer (within Germany) can be provided - Export plates with customs clearance also available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg, Germany Over 1,200 trailers immediately available from stock! We have been specialists and authorized dealers for over 30 years for Brian James / Blyss / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - including repair workshop - Errors, misprints and prior sale excepted -

Condition: new, empty load weight: 781 kg, maximum load weight: 2,719 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,700 mm, loading space width: 1,700 mm, loading space height: 200 mm, loading space volume: 1.3 m³, color: silver, construction height: 1,970 mm, working width: 2,320 mm, Automatic reverse drive, hot-dip galvanized, incl. TracStrap load securing / single ramps / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket tray, * IMMEDIATELY AVAILABLE * incl. TracStrap load securing / single ramps / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket tray, * INCL. TracStrap load securing / single ramps / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 370 x 170 x 20 cm - External dimensions (LxWxH): 562 x 232 x 197 cm - Floor loading height: 40 cm - Perm. Gross vehicle weight: 3,500 kg - Unladen weight: 781 kg - Payload: 2.719 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame, welded - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile - Chassis: Steel frame with non-slip perforated profile Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areasteel single ramps, galvanized steel, adjustable, L=1.62m - stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber bumper dampens noise - very low chassis for low drive-on angle - excavator bucket rest - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - TracStrap Kit (Heavy-Duty), TÜV-certified load securing system - Revolutionary system - First-class securing of tracked vehicles - Ready to drive off within a very short time - Front wedges are adjustable and form the basis for form-fit load securing - 2x lashing straps (LC 5000 daN) for lashing over the chains - Free choice of lashing points when lashing in the perforated steel floor - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the dropside for easy access - Automatic reverse drive - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar REINFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Excavator bucket cage - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized Rcsdpfx Aou Hrlkomgsb