Used Edwards Pearson Rtb60T 2550 for sale (532)

Condition: used, Shock absorber, gas spring, shock absorber, start-up damper, impact damper -Manufacturer: Bansbach, gas pressure spring easylift type HONOF42-550-1164-018 080N Pjdpfx Alotlzg Ns Sepr -Piston: Ø 22 mm -Total length: 1200 mm -Piston rod: Ø 10 x 550 mm -Number: 37x gas pressure spring available -Price per piece -Dimensions: Ø 22 x 1200 mm -Weight: 0.9 kg/piece

Condition: used, plastic strapping, strapping tape, packaging tape, tensioning tape, plastic tape Podpstr R Atjfx Al Sopr -Strapping band: plastic strapping band 2 rolls -Type: HM 19-725-500 -Width: 19mm -Length: 500 m -Number: 2 rolls -Price/Delivery: complete -Box dimensions: 310/300/H310 mm -Total weight: 12.8 kg

Condition: good (used), Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Manufacturer: Festo, Guide cylinder type DFM-25-50-PA-GF -Piston: Ø 25 mm Ppsdjf Sl U Djpfx Al Ser -Stroke: 50 mm -Max. pressure: 10 bar -Number: 4x cylinders available -Price: per piece -Dimensions: 135/95/H45 mm -Weight: 1.6 kg

Condition: used, Control card, output card, controller Pjdpfx Aocc Enusl Sepr -Manufacturer: Siemens -Type: 811 0255 01A -Type: 8110255 01A -Number: 1x control cards available -Price: per piece -Dimensions: 96/410/H30 mm -Weight: 0.31 kg

Condition: used, Valve terminals, multi-pin connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve Ppedpfx Aohzzcgjl Ser -Manufacturer: Festo, valve island -Valves: Festo 161 360 T702 and 162 550 T602 -Pressure regulator: 0 - 4 bar -Individual components: see photos -Dimensions: 260/160//H130 mm -Weight: 2.5 kg

Condition: used, Upper support, cross support, cross table, cross slide table -Upper support comes from a Waldrich Coburg portal milling machine type: 12 D 3232-550 HL Ppedpfx Alsct Aa Re Sor -Table surface: mm -Travel: x 350 mm/y 220 mm -Dimensions: 1380/1000/H800 mm -Weight: 800 kg

Condition: good (used), Pneumatic cylinders Ppjdpfxsb A Sgqs Al Sor -Type: ADV-25-50-A -Max.: 10 bar Price: per piece -Quantity: 4x Available -Weight: 0.3 kg

Condition: ready for operation (used), Siemens 1PH7131-2NF02-0BC0 compact asynchronous motor, without fan, see photo YF.X215125501001, used, normal signs of use, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Ppsdpfx Ajx Dvylel Sjr

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CO2-1125-5000, 1x Vacuum Belt Filter Completely constructed in stainless steel 1.4404/1.4571, grates in stainless steel 1.4301 Finish: pickled and passivated Ppedjxfvahspfx Al Ssr Including: 1x drive roller 508x1427 1x steering roller 88.9x1850 6x support/tension rollers 88.9x1850 1x VBF frame 1x VBF hood frame 1x safety grilles (1.4301) 2x spray pipes, each fitted with 12 nozzles 6x hood brackets for vacuum tube 1x mounting materials, incl. gaskets 1x holder for control valve and paddle 2x slide blocks for tension roller HMPE100 2x bearing blocks for scraper blade HMPE100 1x scraper blade HMPE100 1x drive SEW KH87/T R57 DRN90L4TF 2x bellows d100 wbz 100-E1 2x misalignment switches 2x emergency stop switches 2x emergency stop cords 1x pressure reducer 1x hose and coupling for connection to bellows 23x nozzle holders 23x nozzles 4x rubber seals for wash cabinet 1x rubber seal for suspension conveyor 2x double wash gutters

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3500x2100x1300 mm Total power requirement 0 kW Ppodpfev Uch Iex Al Sor Weight 1200 kg

Condition: used, Year of construction: 2000, Alzmetall column drill Type: AC 25 - 501 Year of manufacture: 2000. Pjdpfewwmkwjx Al Sspr

Condition: new, Year of construction: 2025, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 190 mm, roller (top) diameter: 190 mm, working width: 2,550 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 4 kW (5.44 HP), STANDARD EQUIPMENT This mechanical model is generally manufactured for use in light and medium-duty operations. It is especially used for bending materials up to 10 mm thick. Applications include bending of aluminum sheets, the manufacture of ventilation ducts, advertising panels, machine bodyworks and sheet metal components, and many other similar tasks. All models are equipped with planetary gearbox drive High-strength shafts manufactured from SAE 1050 (CK 45) certified steel Welded steel main frames Manually openable top roll Mobile control panel Conical bending roller Centralized lubrication system Precise bending feature via braked motor and planetary gearbox Powered rear roll with up/down movement Top roll support system In compliance with EU Safety Directives (CE Certificate) User manual OPTIONAL EQUIPMENT Digital display for rear roll Hardened shafts Extended shaft ends for mounting profile and pipe bending rolls Profile and pipe bending roll set Motorized lower roll with up/down movement Derlin ringed top roll for Alucobond bending Adjustable speed steps NC Control TECHNICAL SPECIFICATIONS Bending length: 2550 MM Pre-bending: 4/5 MM Bending: 5/6 MM Top & bottom roll diameter: 190 MM Ppedpfjx D Dfvjx Al Ser Min. bending diameter: 285 MM Main motor power: 4 kW Rear motor power: 1.5 kW Length: 4700 MM Width: 950 MM Height: 1300 MM Weight: 3400 KG

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,550 mm, sheet thickness (max.): 10 mm, STANDARD EQUIPMENT - Steel construction main frame - Hydraulic top roll opening head - Movable control panel - Motor-driven central rolls - Hydraulic up-down movement for rear and lower rolls - Precision bending with braked main motor - Cone bending and pre-bending system - Lower and upper rolls driven by planetary gearbox - Rear roll ball system facilitating sheet movement - Compliance with EU safety directives - High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - User manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit - Dual speed operation - Infinitely variable speed adjustment - Ejector system - Hydro-motor option Psdpfow Slcgsx Al Sspr TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller length: 2,550 mm, sheet thickness (max.): 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Equipped with overload protection * All rolls are driven by hydromotors and planetary gearboxes * Hydraulic opening head allows easy removal of curved parts * Very easy operation with movable control panel * Lower roll positions can be easily read using two digital displays * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Bearing-mounted conical bending system * Hydraulic balancing system provides parallel movement of shafts * Extended shaft ends to allow mounting of profile and pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) for supporting large diameter bending Podpfx Alow Slf Uj Sspr * Hydraulic side supports for large diameter bending * Ground and polished rolls for special operations * Rolls for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 12/16 mm Bending: 16/18 mm Upper & Lower Rolls: 300 mm Side Rolls: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X81559, clamping force: 9,000 kN, screw diameter: 115 mm, injection pressure: 1,740 bar, ejector stroke: 300 mm, controller model: CDS700, TECHNICAL DETAILS Clamping Unit Clamping force: 9,000 kN Platen size (H x W): 1,570 x 1,560 mm Tie bar spacing (H x W): 1,010 x 1,010 mm Min. mold height: 300 mm Max. mold height: 1,190 mm Max. opening stroke: 2,290 mm Centerring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 115 mm Shot volume: 6,232 cm³ Shot weight (PS): 5,733 g Injection pressure: 1,740 bar Max. injection speed: 300 mm/s MACHINE DETAILS Control system: CDS700 Weight of clamping unit: 44,500 kg Weight of injection unit: 20,000 kg EQUIPMENT Pjdsx A At Nspfx Al Sjpr Pneumatic valves (6 pcs.) Core pulls (1 pc.)

Year of construction: 2022, condition: good (used), Manufacturer / Model: Grafotronic DCL2 550 Serial Number: 220520G Web Width: 550 mm Year of Manufacture: Location: Germany Condition: Used – in production CE Marking: Yes _____ Main Configuration Unwinder Module: • Max. roll Ø 1000 mm / weight 430 kg • Ultrasonic sensor and web guide ±15 mm • Splice table with clamps, servo brake, reel lift Flexo Printing / Coating Module (10–24" repeat): • GEW E2C UV dryer • Ceramic anilox 400 l/cm – 5.5 cm³/m² • Stainless steel ink pan 1.2 L, reverse-angle doctor blade • Re-register drive for overprinting • Max. speed 100 m/min – tolerance ±0.1 mm Die-Cutting Module (10–24" repeat): • Servo register system, anvil & support roller • Contact matrix rewind, stripping bar • Delam/Relam before die-cutting (limit 70 m/min) • Max. speed 250 m/min, tolerance ±0.1 mm Inspection & Slitting Section: • Missing Label Detection (MLD) up to 220 m/min • Automatic Sci-Fi knife system (12 sets) • Vacuum edge-trim removal • Auto-set under/back scorer (2 knives) Semi-Automatic Turret Rewinder: • 2 × Ø 600 mm rolls • Semi-automatic cutting and push-out system • Label & meter counters • Core diameters 40–76 mm Additional Equipment: • Anti-static brush • Tablet with housing and accessories • ERP interface • Crane for magnetic cylinders Materials: • Foil 30–250 µm Ppjdpfx Ajxq A Hljl Ssr • Paper 100–250 µm _____ General Condition: Overall in good working order. According to the operator, two UV units require lamp replacement, which represents a minor cost. All other modules are fully functional.

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 12460 € 239.23 € 60 mm 500 mm 760 mm 1000 mm 186 kg 10 cm³ 60 x 4 mm 2" x 3,91 mm 60 x 4 mm 60 x 2 mm 60 x 3 mm 60 x 6 mm 64 x 6 mm 64 x 6 mm Ppjdpfx Alowiru Se Ssr 63 x 4 mm 50 x 4 mm 35 mm 35 x 35 mm 60 x 20 stehend, 60 x 35 mm 380 mm 10 mm 10 mm 1,5 / 3 U/min 1.5 kW quick-change tooling system digital display of bending angle material spring back compensation foot pedal for hands-free operation accurate counterbending die positioning users manual tools not included, priced on request

Condition: good (used), Year of construction: 2020, operating hours: 2,125 h, load capacity: 2,000 kg, fuel type: electric, empty load weight: 600 kg, mileage: 2,125 km, Electric ride-on pallet truckBrand: STILL (Germany)Year of manufacture: 2020ONLY 2,125 hoursFork length: 1,800 mmCapacity: 2,000 kg2020 gel maintenance-free batterywith INTERNAL charger Ppodjx Hyx Hspfx Al Ser

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 2,550 mm, sheet thickness (max.): 25 mm, STANDARD EQUIPMENT * Lower, upper, and side rolls are hydraulically actuated and move linearly up and down via body-mounted pistons * Protected against overload * Upper and side rolls are driven by hydromotors and planetary gearboxes (3-roller motor drive system) * Positions of the rolls can be easily read via three digital displays * The hydraulically opening head and automatically upward-moving shaft make it easy to remove the bent workpiece * Extremely easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone rolling system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support in large diameter rolling * Hydraulic side supports for large diameter rolling Podpfow Smb Rex Al Sopr * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Rolling Length: 2550 mm Pre-bending: 16/20 mm Bending: 20-25 mm Upper & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1900 mm Height: 1950 mm Weight: 12,800 kg

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 400 mm, roller (top) diameter: 400 mm, side roll diameter: 300 mm, working width: 2,550 mm, sheet thickness (max.): 40 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, STANDARD EQUIPMENT * Upper, lower, and side rolls are linearly moved up and down by hydraulically actuated pistons attached to the frame * Protected against overload * Upper roll and side rolls are driven by hydromotors and planetary reducers (3 roll motor drive) * The position of the rolls can be easily read with three digital indicators * The hydraulically opening head and the automatically lifting shaft allow the bent part to be removed easily * Very easy operation with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) to support large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280-320-350-380-400-460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 25/30 mm Bending: 30/40 mm Upper & Lower Roll Diameter: 400 mm Side Roll Diameter: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5350 mm Width: 2250 mm Height: 2350 mm Ppjdpfx Alexw Ebxj Sjr Weight: 17,800 kg

Condition: like new (used), Year of construction: 2006, Used high quality Bystronic PR320 6 axis 4 metre x 320 ton CNC down stroke hydraulic pressbrake for sale Edwards Pearson / Bystronic – fully serviced with Bystronic uk as per photo Model: PR 320 x 4100 / Beyeler PR320 Working length 4100mm Max. press force 3200kn Max stroke 265mm Rapid approach 190mm/s Ppjdpfx Ajip Np Hel Sjr Bending cycle 10mm/s Rapid return 150mm/s 320/4100 free standing CNC Pressbrake 6axis / 6 axes: Y1 – Y2 – Z1 – Z2 – X – R Year 2006 Complete with: Cybelec ModEva 10s Hydraulic tool clamping 4 axis back gauge Crowning Hydraulic tool clamping No pit required Delivery and installation in your factory complete with warranty and tooling can be arranged

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, pressing force: 150 t, working width: 4,100 mm, working range: 4,100 mm, High quality fully serviced Bystronic 4metre cnc pressbrake for sale Pr150 150 x 4100 Make: Bystronic Edwards Pearson Model: PR 150 Pressure Reference PR6 Year / new: 2008 Total axis: 6 – 4axis back gauge X R Z1 Z2  Hydraulic crowning Ppedpfxeual T So Al Ser Free standing no pit required Capacity / bed size / tonnage: 4metre x 4100mm x 150ton Cnc control: Cybelec Modeva Control Fully serviced with Bystronic uk – as attached per photo We can quote for brand new tooling to fit this machine to produce your steel products. Delivery to your factory and installation complete with tuition with your operators can be arranged.

Year of construction: 2004, condition: like new (used), Used high quality Bystronic Edwards Pearson PR6 cnc pressbrake for sale – manufactured by Beyeler GMBH Bystronic Edwards Pearson PR6 100/3100 CNC Pressbrake 3metre x 100ton / 3100mm New / Year 2004 Ppjdpfxshgl S So Al Ssr Hydraulic tool clamping Hemming table – to be confirmed 4 axis back gauge – z1, z2, x and r axis – 6axis in total Cybelec Modeva 10 Machine in good working condition including upper & lower Pressbrake tooling. Fully serviced by Bystronic uk The full services of New tooling, delivery, installation, training and guarantee are available form us on this machine

Year of construction: 1994, condition: like new (used), Used high quality URSVIKEN 400ton x 5metre cnc Press Brake for sale Very clean 5metre cnc pressbrake for sale – European / Swedish made machine Model = Optima 400 5.1/4.37 Bed Length 5000mm / 5metre 8axis – 6axis back gauge Y1, Y2, X1,X2,R1,R2,Z1,Z2 CNC Hydraulic Press 400 Tonne Capacity Swiss made Cybelec Controller – Presscad 900 – the same control as Bystronic and Edwards Pearson pressbrakes Multiple Forming Tools 8m x 4m (26ft x 13ft) Footprint (inc. Tool Trolley and Controller 26.5 tonne Machine Weight Year / new 1994 Ppjdpfehikggsx Al Sjr Refurbished in 2016 Full Working Order Stop time 55ms Max working pressure 31.8MPa Guard distance 90mm Complete with a good selection of tooling – we can quote for brand new top and bottom tooling to bend your steel on this machine The full services of delivery, installation and training can covered.

Year of construction: 2004, condition: excellent (used), High quality fully serviced Bystronic 200ton x 4metre cnc pressbrake for sale • Pr6 200 x 4100 • Make: Bystronic Edwards Pearson • Model: PR 6 Pressure Reference • Year / new: 2004 • Total axis:6 – 4axis back gauge X R Z1 Z2 • Hydraulic crowning • Free standing no pit required • Capacity / bed size / tonnage: 4metre x 4100mm x 200ton Ppodpfx Alon Smafe Ser • Cnc control: Cybelec Modeva 10S control