Used Efem Internal Threading Machine for sale (70,487)

Condition: new, Year of construction: 2024, shaft length under head: 80 mm, thread length: 55 mm, travel speed (max.): 480 mm/min, THREADING MACHINE E.W. MENN GW63 Refurbished as new acc. to CE Stand. Completely overhauled. Giedpfst Uucaox Alxet New Guides, vibrator, new vibrating evacuation. New electrical system with Inverter and PLC M8x80/55 mm. 480 ppm. Thread diameters (min./max.): 3 - 8 mm. Dies length: 115/130 mm. To be viewed and tested at HBR srl - Calolziocorte (LC)

Year of construction: 2002, condition: refurbished (used), I offer on behalf of a customer and on his account a VOUMARD 150 CNC L 1300 for sale. The machine is equipped with: 4-fold turret 3 x inside, 1x empty space for outside pneumatic swivelling dresser diameter max 350 mm length max 1.300 mm CNC Fanuc 32 i very extensive accessories among others several hydr. steady rests, power chucks etc. View under "Documents Gsdpfxsgigv Dj Alxoit Machine can be inspected under power at the owner's premises. The machine was overhauled in 2016 In addition, I offer 2 pieces of grinding spindles Voumard VMX 90 A, once new, once reconditioned. The can also be purchased seoerat

Year of construction: 1971, condition: ready for operation (used), A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible. Gisdpfx Alsxyk S Ujxot

Year of construction: 1955, condition: ready for operation (used), A conventional internal cylindrical grinding machine Fortuna is available. Center distance: 1500mm, center height: 225mm, max. workpiece diameter: 450mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm, speed: 265rpm, machine dimensions X/Y/Z: approx. 3450mm/1450mm/1550mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Gisdpfoyg Nvtex Alxet

Condition: ready for operation (used), Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible. Gisdpfx Aex Uq T Dolxst

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Gijdpoxf Ikfsfx Alxst

Condition: good (used), JUNG D22 - Internal Cylindrical Grinding Machine - Machine suitable for internal grinding / plunge grinding - Smallest grindable bore: 14 mm - Largest grindable bore: 150 mm - Grinding length with face grinding attachment: 250 mm - 6 workpiece spindle speeds: 46-270 rpm - Spindle head swivels right/left: 30 degrees - Distance from spindle axis to table center: 250 mm - Maximum distance between workpiece spindle and grinding support: 935 mm - Worktable / tilting forwards and backwards: 5 degrees each - Manual / automatic operation - Taper grinding attachment - Steady rest - Three-jaw chuck - Spare grinding spindles (see photos) Dimensions: Gjdpfxsyh Hhgs Alxoit LxWxH: 2.8 x 1.5 x 1.8 meters / Weight: 3500 kg Errors and omissions excepted.

Year of construction: 1969, condition: ready for operation (used), Max. grinding depth: 80mm, distance spindle table: 145mm, spindle bore: 28mm, connected load: 7kW, length: 2100mm, width: 1400mm, height: 950mm, weight: 1.6t, with documentation, an inspection is possible. Giodpjqzkdmofx Alxet

Condition: new, Year of construction: 2026, functionality: fully functional, A marking work table dedicated to threading machines is a solid and functional solution for professionals. It has holes for mounting the threading arm and a polished top with T-slots with a spacing of 152 mm. This high-quality table with dimensions of 900 m x 600 mm 780 mm ensures stability, precision and mobility when machining threads. Additionally, the table is equipped with tool cabinets that provide easy and practical storage of necessary items. Description It has dedicated holes for mounting the threading arm Grinded top equipped with T-slots - 3x 14 mm, spacing 152 mm - ideal for marking work The table has 2 tool cabinets. Gisdpjvugwgefx Alxot Table top dimensions 900x600 mm Table height 760 mm Tabletop thickness 50 mm Groove width 3x14 mm Groove spacing 152 mm Weight 99 kg

Condition: new, Year of construction: 2026, The electric threading machine is a compact and efficient threading device, used both in large production plants and small workshops. Thanks to the high-torque servo drive and swivel head, it enables fast and precise thread cutting. Equipped with a blow-through cooling system, the threading machine ensures optimal visibility of the drilled hole. The threading arm has 2 operating modes: automatic and manual. Description of the RGE16PW threading machine The electric threading machine is a versatile threading device that is used in both large production plants and small workshops. Its main advantage is shortening the time of threading operations, making the process much more effective. The threading machine has a simple and compact design, equipped with a swivel head, which increases the possibilities of its use. The device is driven by a high-torque servo drive, which ensures strong and reliable operation. In order to operate the device, the threading arm is equipped with a touch control panel with a menu available in Polish. This intuitive panel allows you to easily program threading parameters such as rotational speed, threading direction and thread cutting depth. The standard equipment of the threading machine includes a micro-spraying system, which is used for constant cooling with minimal consumption of cooling lubricant. In addition, the device is equipped with a chip blower, which ensures optimal visibility of the drilled hole. The tapping arm is equipped with a quick-mount holder that allows easy and quick attachment of taps to through and blind holes. Additionally, the device has a rotating motor unit that allows thread cutting at any angle ranging from 0° to 90°. Compared to manual threading, the threading machine offers greater accuracy and reliable threading while maintaining a right angle (90°). Collets for taps are equipped with adjustable overload clutches. The couplings in the sleeves are pre-adjusted to standard torque values ​​for specific tap sizes, but these settings can be corrected using a special key included in the set. It also includes a large radius swivel arm that makes it easier to position the tap on the workpiece, ensuring precise and efficient thread cutting. It is intended for cutting threads in various materials such as steel, stainless steel, aluminum and non-ferrous metals. An electric threading machine is a reliable and effective tool that speeds up the threading process, improving the precision and quality of threads. Thanks to its versatility and ease of use, it is used in various industries, from industrial production to craft workshops. Thanks to the use of modern technologies and solid construction, the threading machine ensures not only time savings, but also long-term efficiency and durability. It is an indispensable tool for professionals who require fast, precise and reliable threading in their work. The set includes tap holders: M3, M4, M5, M6-8, M10, M12, M13, M16 The machine is sold without a work table, vice and taps Technical parameters Power 0.6 kW Gisdpovvlkzefx Alxst Power supply 230V Weight 30 kg Max. arm reach 1080 mm Max. Rotational speed 375 rpm.

Condition: new, Year of construction: 2026, functionality: fully functional, A marking work table dedicated to threading machines is a solid and functional solution for professionals. It has holes for mounting the threading arm and a polished top with T-slots with a spacing of 152 mm. This high-quality table with dimensions of 800 m x 500 mm 860 mm ensures stability, precision and mobility when machining threads. Additionally, the table is equipped with tool cabinets that provide easy and practical storage of necessary items. Characteristics of the marking table: The marking work table dedicated to threading machines is a solid and functional solution created for professionals involved in thread processing. This high quality table has been specially designed to enable precise threading operations. The polished table top is not only durable, but also equipped with T-slots with a spacing of 152 mm. These grooves are perfect for all marking work, enabling safe and precise guidance of tools. The table is equipped with a practical tool cabinet that allows you to store the necessary tools for work. Thanks to this, tools are always at your fingertips, which speeds up and facilitates thread machining processes. Additionally, the table is equipped with ergonomic wheels with a brake, allowing it to be easily moved around the workshop. Thanks to them, work becomes more mobile and the table can be freely moved depending on current needs. The wheels are solid and durable, which ensures the stability of the table during work and at the same time allows it to move smoothly across the workshop surface. This table has appropriate dimensions that provide a comfortable and effective working space. Its length is 800 mm, which provides enough space to handle various sizes and lengths of materials. The table width is 500 mm, which is the optimal size enabling free operations on the material. The marking work table dedicated to threading machines is a solid and functional solution that provides professionals with high precision and stability when machining threads. Thanks to equipment such as T-slots, a tool cabinet and ergonomic wheels, this table allows comfortable and effective work in the workshop. Technical parameters: Tabletop dimensions 800 x 500 mm Table height 760mm Godpfevugu Esx Alxeit Countertop thickness 50mm Groove width 3x 14mm Groove spacing 152 mm Door width 360mm Door height 605mm Weight 84 kg

Condition: new, Year of construction: 2026, Characteristics of the RGE36PWx1700 threading machine The electric threading machine is a versatile device for creating threads that is used in both large factories and small workshops. Its main advantage is that it shortens the time required for the threading operation, which makes the entire process more efficient. The threading machine has a simple and compact design, equipped with a movable head, which increases its versatility. The device is driven by a strong servo drive, which guarantees strong and reliable operation. To enable operation, the threading machine arm has been equipped with a touch control panel with an intuitive menu in Polish . This panel allows easy programming of threading parameters, such as rotational speed, threading direction and thread cutting depth. Gisdpfsvugrqsx Alxot The standard equipment of the threading machine includes a micro-spray system, which effectively cools the tool with minimal lubricant consumption. In addition, the device is equipped with a blower, which removes chips, providing good visibility of the drilled hole. The threading machine arm has a quick-clamping holder, allowing easy and quick clamping of taps in both through and blind holes. The threading head can be set both vertically and horizontally in the range of 90°, as well as to the right or left by 180°. Compared to traditional manual threading, the threading machine offers greater precision and reliability, while maintaining a right angle (90°). The collets of the tap machine are equipped with adjustable overload clutches. The tap machine set includes DIN tap holders from M6 to M36, which provides a wide range of applications for different thread sizes. They are set to standard torque values ​​for different tap sizes, but it is possible to adjust these settings using a special key, which is part of the set. In addition, the machine is equipped with a manual mode that allows the user to control the threading process independently. It is also possible to program a cyclic change of the threading direction, which helps to break chips and maintain the efficiency of the process. Thanks to these functions, the threading machine provides even greater flexibility and precision in performing threading operations. The electric threading machine is designed to create threads in various materials, such as steel, stainless steel, aluminum and non-ferrous metals. It is a reliable and efficient tool that speeds up the threading process, improving the precision and quality of the threads produced. Thanks to its versatility and ease of use, it is widely used in various industries, from the manufacturing industry to craft workshops. Thanks to the use of modern technologies and a solid construction, the electric threading machine guarantees not only time savings, but also long-term efficiency and durability. It is an irreplaceable tool for professionals who require fast, precise and reliable threading in their daily work. The electric threading machine offers convenience, efficiency and excellent thread quality, significantly facilitating and streamlining the threading process. DIN tap holders included: M5-6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 The machine is sold without a work table, vice and taps Technical parameters Power 1.2kW Power supply 230V Libra 56kg Max arm reach 1700mm Max. rotation speed 125 rpm

Condition: new, Year of construction: 2026, Characteristics of the RGE36PWx1200 threading machine The electric threading machine is a versatile device for creating threads that is used in both large factories and small workshops. Its main advantage is that it shortens the time required for the threading operation, which makes the entire process more efficient. Giedovugq Tjpfx Alxot The threading machine has a simple and compact design, equipped with a movable head, which increases its versatility. The device is driven by a strong servo drive, which guarantees strong and reliable operation. To enable operation, the threading machine arm has been equipped with a touch control panel with an intuitive menu in Polish . This panel allows easy programming of threading parameters, such as rotational speed, threading direction and thread cutting depth. The standard equipment of the threading machine includes a micro-spray system, which effectively cools the tool with minimal lubricant consumption. In addition, the device is equipped with a blower, which removes chips, providing good visibility of the drilled hole. The threading machine arm has a quick-clamping holder, allowing easy and quick clamping of taps in both through and blind holes. The threading head can be set both vertically and horizontally in the range of 90°, as well as to the right or left by 180°. Compared to traditional manual threading, the threading machine offers greater precision and reliability, while maintaining a right angle (90°). The collets of the tap machine are equipped with adjustable overload clutches. The tap machine set includes DIN tap holders from M6 to M36, which provides a wide range of applications for different thread sizes. They are set to standard torque values ​​for different tap sizes, but it is possible to adjust these settings using a special key, which is part of the set. In addition, the machine is equipped with a manual mode that allows the user to control the threading process independently. It is also possible to program a cyclic change of the threading direction, which helps to break chips and maintain the efficiency of the process. Thanks to these functions, the threading machine provides even greater flexibility and precision in performing threading operations. The electric threading machine is designed to create threads in various materials, such as steel, stainless steel, aluminum and non-ferrous metals. It is a reliable and efficient tool that speeds up the threading process, improving the precision and quality of the threads produced. Thanks to its versatility and ease of use, it is widely used in various industries, from the manufacturing industry to craft workshops. Thanks to the use of modern technologies and a solid construction, the electric threading machine guarantees not only time savings, but also long-term efficiency and durability. It is an irreplaceable tool for professionals who require fast, precise and reliable threading in their daily work. The electric threading machine offers convenience, efficiency and excellent thread quality, significantly facilitating and streamlining the threading process. DIN tap holders included: M5-6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 The machine is sold without a work table, vice and taps Technical parameters Power 1.2kW Power supply 230V Libra 56kg Max arm reach 1200mm Max. rotation speed 125 rpm

Condition: new, Year of construction: 2026, The electric threading machine is a versatile threading tool, ideal for both large factories and small workshops. It has a simple and compact design with a movable head and a high-torque servo drive, which ensures strong and reliable operation. The threading machine offers easy and quick tap mounting, adjustable thread cutting angle and adjustable collets. The threading machine model is equipped with an oil dispenser and a blower to blow away chips. The machine has a touch control panel with a menu in Polish. The threading arm has 2 operating modes: automatic and manual. It is intended for threading various materials. Characteristics of the RGE30PW threading machine The electric threading machine is a versatile device for creating threads that is used in both large factories and small workshops. Its main advantage is the reduction of the time needed for the threading operation, which makes the entire process more efficient. The threading machine has a simple and compact design, equipped with a movable head, which increases its versatility. The device's drive is based on a strong servo drive, which guarantees strong and reliable operation. To enable operation, the threading arm is equipped with a touch control panel with an intuitive menu in Polish . This panel allows you to easily program threading parameters such as rotational speed, threading direction and thread cutting depth. The standard equipment of the threading machine includes a micro-spraying system that effectively cools the tool with minimal lubricant consumption. In addition, the device is equipped with a blower that removes chips, ensuring good visibility of the drilled hole. The threading machine arm has a quick-mount holder, enabling easy and quick mounting of taps in both through and blind holes. The threading head can be adjusted both vertically and horizontally by 90°, as well as to the right or left by 180°. Compared to traditional manual threading, the threading machine offers greater precision and reliability while maintaining a right angle (90°). The threading machine's collets are equipped with adjustable overload clutches. The threading machine set includes DIN tap holders with sizes from M6 to M30, which provides a wide range of applications for various thread sizes. They are set to standard torque values ​​for various tap sizes, but it is possible to adjust these settings using a special wrench that is included in the kit. The electric threading machine is designed to create threads in a variety of materials such as steel, stainless steel, aluminum and non-ferrous metals. It is a reliable and efficient tool that speeds up the threading process, improving the precision and quality of threads. Thanks to its versatility and ease of use, it is widely used in various industries, from the manufacturing industry to craft workshops. The set includes DIN tap holders: Giodpfx Aljvughxjxot M5-6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30 The machine is sold without a work table and taps. Technical parameters Power 1.2 kW Power supply 230V Libra 50 kg Max. arm reach 1200 mm Max. Rotation speed 156 rpm

Condition: excellent (used), thread dia. 36 mm Giodpfx Aljyhq S Eoxot

Year of construction: 2000, condition: excellent (used), Thread cutting machine make ROTHENBERGER Giodpfx Ajmn Thhslxot TYPE:3S-G year of construction ca.2000 Without cutting head with pipe cutter and end burr device. Runs with V230 current. In top condition, like new.

Condition: good (used), Year of construction: 1990, Thread cutting machines with accessories Manufacturer SONE Type: 2000 . Giedpfx Asvk D Rpslxjt 230V .

Condition: used, Year of construction: 2000, Technical details: pulling force - max.: 2,5 t max. ram stroke: 1000 mm max. workpiece diameter: 40 mm Broaching speed: 60 m/min. return speed: 20 m/min. Giodjw Dugaopfx Alxet total power requirement: 24 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 1,7 x 2,4 x 4,77 m clamping plate: 320 mm It is a hydraulic machine. *

Condition: good (used), Year of construction: 1996, machine/vehicle number: T1000214, Manufacturer: Tripet Model: TST 100 (CNC) Machine Type: Internal Cylindrical Grinding Machine Year of Manufacture: approx. 2001–1993 (depending on specific machine) Weight: approx. 3,500 kg 📊 Machining / Grinding Data Max. Internal Grinding Diameter: approx. 0.5 – 50 mm Max. Grinding Length: approx. 100 mm Max. Grinding Depth: approx. 100 mm Workpiece Outer Diameter (reference): up to approx. 100 mm Gijdjym Ttpspfx Alxet Workpiece Spindle (B-axis) – max. load: 25 kg Workpiece Spindle Speed: approx. 45 – 1,600 rpm Roundness Accuracy: < 0.0005 mm ⚙️ Axes & Movements Z-axis (Axial Movement): • Travel: approx. 350 mm • Drive: Indramat AC motor • Feed rate: 0 – 9 m/min • Resolution: 0.0005 mm U-axis (Radial Workpiece Movement): approx. 100 mm X-axis (Radial Grinding Head): approx. 50 mm B-axis (Swivel of Surface Grinding Headstock): manual −30° / +60° 🌀 Spindle Data Grinding Spindle (Standard): Type: Fischer HJN 1028 Diameter: approx. 100 mm Max. Speed: approx. 28,000 rpm Drive Power: approx. 3 kW Operating Range: approx. 2,000 – 6,000 rpm 🖥️ Control System CNC Control, depending on version: • TRIPET NUM 750 or Brüsch TPS 3000 🔧 Additional Components Hydraulic Unit: • Pump 2.2 kW, Pressure approx. 35 bar, Max. flow 20 l/min • Tank approx. 60 l (self-regulating pump) Coolant System: • Pump 0.27 kW • Pressure approx. 2 bar, Flow approx. 12 l/min • Tank approx. 130 l

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Chuck diameter: 160 mm Tailstock quill travel: 45 mm Gsdpfxoxf Uwxj Alxsit Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition

Condition: used, Year of construction: 1956, functionality: fully functional, We are selling a Koepfer Furtwangen machine for gear milling. Gisdpfx Aleyi U Imsxot

Condition: good (used), Year of construction: 2016, Internal item no.: 26001 Taxed under the differential taxation scheme according to §25a German VAT Act. You will receive a proper invoice, but VAT is not separately shown. You are welcome to inspect the machine under power in a heated warehouse area of over 500 m². Column Drilling Machine Geldmacher DP25 Year of manufacture: 2016 Godpeygvtxefx Alxoit + Thread cutting function + Infinitely variable speed (150 - 3000 rpm) + Coolant pump + Emergency stop / safety cover with switch (UVV compliant) Dimensions (approx.): 90 x 65 x 185 cm Weight: approx. 350 kg The machine comes from an educational institution and is in well-maintained condition.

Condition: good (used), Thread cutting machine, pipe thread cutter -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts -Speed: 40 rpm -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm Gsdpfx Alox I Agpjxjit -Weight: 46.6 kg

Condition: excellent (used), Year of construction: 1991, swing diameter 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : WMW - GLAUCHAU Gsdpfx Asxyllvslxeit Hydraulic Internal Grinding Machine with Face Grinding Device model SI 6/1 AS-N x 315 year 1991 Internal grinding diameter 40 - 400 mm Internal Grinding depth, max. 315 mm Max. grindable External dia. 400 mm Weight of workpiece without steady, max. 630 kg Workpiece Swing Ø, with / without safety hood, max. 500 / 600 mm Height of centre above table 360 mm 16 step workpiece spindle speeds 40 – 400 rpm Workpiece spindle bore, approx. 53 mm Workpiece headstock swivelling max. 30 ° Adjustment of workpiece headstock position crosswise, max. 400 mm Automatic cross traverse of grinding head 70 mm Adjustment of grinding head position on slide crosswise, approx. 100 mm Feed of grinding head, intemittendly 0.001 – 0.025 mm/stroke Feed of grinding head, continually 0,1 – 1 mm/min Table stroke, max. 630 mm Table speeds infinitely variable 0,1 – 8 m/min (10 m/min) Distance workpiece headstock and grinding slide, max. 1,250 mm Adjustment of Grinding spindel stock on table 520 mm Spindle drive, approx. 7.5 kW Total electrical load, approx. 17 kW - 380 V - 50 Hz Weight, approx. 6,000 kg Accessories / Special Features: • Universal internal grinding spindle head with automatic cycles to grind cylindrical and conical bores with one or multiple diameters, external diameters and grinding of narrow end-faces. • Face grinding device, hydraulic swivel-in, with automatic cycles to grind end-faces, multiple end-faces and two tiered end-faces simultaneously • Electronic cycle control with control tableau to set up all the grinding and dressing cycles including ampere-meters for internal grinding spindle and face grinding spindle • Belt-type grinding spindle drive with mounted grinding spindle and 5 pieces separate interchangeable grinding spindles along with various pulleys with various diameters. • Dressing device for both grinding spindles • HEIDENHAIN Digital Read-Out for the cross adjustment of the Workpiece headstock • A large amount of operating tooling and accessories as : 4-jaw Faceplate Ø approx. 520 mm, 3-jaw chuck Ø approx. 380 mm, 3-jaw-chuck Ø approx. 130 mm, pulleys, spindle sleeves, grinding flanges, foot switch, • Separate hydraulic unit, built on switch cabinet, coolant device with magnetic separator. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Gedeurw Uyjpfx Alxjit Technical data: Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Machine equipment (standard): 1 pc. Workpiece headstock MK5 1 pc. Control panel 1 pc. Holder for internal grinding spindle 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment