Used Eht Ehp 20-35 for sale (36,674)

Condition: used, Year of construction: 2003, SCM SANDYA 20 model 20 M3 135 calibrating and sanding machine, used Year of manufacture: 2003 Fgsdpfoxwbydex Akhsf Serial number: AE/024903 Maximum working width: 1350 mm Feed speed: 3.5-18 m/min with inverter Working height: 4-170 mm Vacuum bed: 7.5 KW Configuration: 1st group: grooved steel calibration roller D. 250 – motor 22 KW 2nd group: sanding roller D. 250, hardness 45 SH – two-speed motor 9/11 KW, 1400/2800 rpm 3rd group: combined roller D. 170, hardness 30 SH + segmented elastic pad (46 segments) – motor 11 KW with inverter 4th group: scotch brite finishing roller Bed positioner with workpiece Belt size: 2620 x 1370 mm Blowers for 2nd and 3rd belt Automatic belt centering Electronic control of 1st / 2nd / 3rd roller / pad

Condition: used, functionality: fully functional, machine/vehicle number: 9328, Year of construction: 2017, operating hours: 10,065 h, load capacity: 12,000 kg, lifting height: 3,500 mm, free lift: 1,600 mm, fuel type: diesel, mast type: duplex, construction height: 3,240 mm, power: 129 kW (175.39 HP), fork length: 1,500 mm, empty load weight: 19,650 kg, total length: 5,790 mm, drive type: Diesel, construction width: 2,500 mm, Sideloading forklift Fodpfx Asx Ekz Nskhegf Chassis number: 9328 Load center: 750 Fork width: 200 mm Fork thickness: 80 mm Mast type: Duplex Condition: Refurbished with warranty Technical condition: good Front tyre type: Pneumatic Front tyre size: 14.00-20 Front tyre condition: 60 - 80% Rear tyre type: Pneumatic Rear tyre size: 14.00-20 Rear tyre condition: 60 - 80%

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 97400 € 1840.86 € 2050 mm 30 mm 30 mm 25 mm 25 mm 20 mm 350 mm 350 mm 260 mm Fedeynm Enopfx Akhogf 1,5-5 m/min 22 kW 5000 mm 2000 mm 1900 mm 11000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: new, functionality: fully functional, mileage: 108 km, power: 117.68 kW (160.00 HP), first registration: 07/2024, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 3,750 mm, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, onboard computer, 🇮🇹 IVECO DAILY 35-160 Model year 2024 BRAND NEW FROM FACTORY READY FOR IMMEDIATE DELIVERY Configuration: Fixed flatbed 4.12 x 2.07 m, sideboards height 40 cm Engine: 3.0L, 160 HP Fedot Sad Dspfx Akhsgf Zero kilometers 6-speed manual transmission Wheelbase: 3750 mm Twin rear wheels Multi-leaf spring suspension (quad-leaf) Semi-elliptical spring + additional leaf Digital BLUETOOTH (DAB) radio Air conditioning / electric windows Digital comfort instrument cluster Detachable spare wheel support USB charging port WE ARE ALSO OFFICIAL MERCEDES-BENZ DEALERS AT OTHER LOCATIONS DOMENICO TRUCK SRL, NAPLES (NA) DOMENICO ESPOSITO S.P.A., EBOLI (SA) OFFICIAL DEALER FOR: FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS DOMENICO ESPOSITO S.P.A. LOCATIONS: EBOLI (SA), NAPLES (NA) - OPTION FOR CUSTOMIZED FINANCING OR LEASING ON SITE FROM 24 UP TO 96 INSTALLMENTS ZERO DOWN PAYMENT PHONE: - 0823 1686306 - 335 6713062 WE OFFER A WIDE SELECTION OF USED MULTIBRAND COMMERCIAL AND INDUSTRIAL VEHICLES (FIAT, HYUNDAI, DAF, MERCEDES-BENZ, RENAULT, PEUGEOT, IVECO, MITSUBISHI, SCANIA S-WAY, 5500, V8, 650, 580, 730, S500, S 500, S500 Stralis, MAN, NISSAN V8, Intarder, 770S Limited Edition, 660S, semitrailer, refrigerated trailer, Lamberet, Schmitz, ISUZU, FLATBED, CRANE, TIPPER, CURTAIN-SIDER, BOX BODY, TAIL LIFT, FRIDGE CELL, INSULATED WITH REFRIGERATION UNIT, VAN).

Year of construction: 2013, condition: excellent (used), Welding and cleaning line GRAF, year 2010 The direction of work from left to right Welder four-head SL4Q, max. welding dimension 2800 x 3200 mm, 0.2 mm flash, gasket formates Cooling station WPCNC4 4-axis cleaner with a turning station, equipped with knives for cleaning flat surfaces with a groove and smooth The line was servised in the end of 2022 y. with part replacement for over 10000 Euro (total cost of service). It is in very good condition. Currently is working. Fgedpfx Asvr U Syekhof

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Fsdpfxeykucme Akhjgf Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg Fgsdpfx Aoykuiaekhjf · a ramp included Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) Fgsdpfeykub Ajx Akhjf ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Fodpjihf Tpsfx Akhegf Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: good (used), mileage: 35,076 km, color: black, lifting height: 37,000 mm, Year of construction: 2016, operating hours: 3,725 h, Drivetrain AdBlue system: Yes Make of engine: MAN Weights Empty weight: 7.490 kg Functional Lifting capacity: 4.000 kg CE mark: yes Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Maximum lifting capacity at end of jib: 250 kg Emission level: Stage VI / Tier VI Delivery terms: EXW Latest inspection: 2025-05-14 Production country: DE Additional information Please contact Michael Overmeer for more information = Additional options and accessories = Fgjdpfjztxvbsx Akhjf - Ad blue - Hook blocks = Remarks = Böcker AK 37/4000 montiert auf einen MAN TGL 7.180 with passenger basket, construction year 2016 with only 35.076 km and 3.725 hours. This vehicle is in nice condition (has been well maintained over the years) and has among other things: a passenger basket, automatic leveling, hydraulically folding support legs, hydraulic jip. Changes and typographical errors reserved.

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 5,179 h, load capacity: 3,500 kg, lifting height: 7,780 mm, free lift: 2,495 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, motor manufacturer: Deutz, gearing type: hydrostat, tire condition: 100 %, total height: 3,280 mm, Equipment: air conditioning, lighting, pallet forks, seat heater, Linde H35D-01 (2021) – only 5179 hours! Well-maintained and immediately operational Linde H35D-01 from our own stock, manufactured in 2021. Fully inspected by our own workshop and ready for real work. Why choose this machine? Lifting capacity of 3500 kg Fgodpfxsztqqwe Akhef Brand new 7780mm free-lift triplex mast!!! Lifting height up to 7780 mm (free lift 2495 mm) Overall height only 3280 mm Free-lift triplex mast 4 new solid tires Delivered with a complete pre-delivery inspection Including a fresh BMWT inspection 3 months warranty Available for immediate delivery from 2Bro Trading in Mol. Delivery throughout the Benelux region is possible. Inspection and demonstration are possible at 2Bro Trading in Mol. Please feel free to call or email us for more information.

Condition: ready for operation (used), Siemens 6FC5356-0BB14-0AA0 NCU 561.4, serial number: ST-V22037257. This item has been fully overhauled and comes with a 3-month warranty. Used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Fgodei Ed Ebjpfx Akhsf

Condition: ready for operation (used), Rexroth MHD071B-035-NG1-UN Permanent Magnet Motor, part number: R911272383, serial number: 7260102007192, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fodpei D Niusfx Akhjgf

Condition: ready for operation (used), Siemens 1FK7063-5AF71-1AB0 synchronous servo motor, serial number: YFW249749302003, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fgedpfx Aoi D Rpgekhef

Condition: ready for operation (used), Baumüller BUS20-60/135-30-001, refurbished and tested in accordance with professional standards, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Serial number: 91314741. Fgjdpfx Aksi D T Hujhef

Condition: new, Heidenhain AK ERA 8480 680 - 1100 03S12 H2 L 6, serial number: 63562577, unused, in original packaging, 100% functional, scope of delivery as shown in the photos. Fjdoi Eaf Djpfx Akhogf

Condition: ready for operation (used), Bosch UVF 160M / 4B-21S / 202 / 3531139-6 servo motor, 1070914867, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire for charges for packing and transport separately! Fgsdsk Ru A Uopfx Akhof

Condition: ready for operation (used), ABB DSQC 354 Profibus module. 3HNE, serial number: 304699#99420102, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fodpfx Akei D Trgshogf

Condition: ready for operation (used), Rexroth MDD093B-F-020-N2L-110GL0, serial number MDD093-5842, has been professionally and completely overhauled and tested, and comes with a 12-month warranty. It is 100% functional. The scope of delivery is as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately. Fgodpfxei D Nhaj Akhjf

Condition: ready for operation (used), Bosch SD-B4.180.020-01.000 servo motor, serial number: 845000135, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fodpfxsi D E Ums Akhjgf

Condition: ready for operation (used), Siemens 1FK7042-2AK74-1AH0 synchronous motor SN: YFP0647013502001, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos, The agreed sales discounts do not apply to this item. Please ask for price separately! Fgedpfx Ajvgpi Aekhsf

Condition: ready for operation (used), Siemens 1FK7063-5AF71-1EG5 synchronous servomotor, serial number: YFR123002204008. The item has been inspected and tested. Used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Fjdpfx Aoi D Rqdekhogf

Condition: ready for operation (used), Siemens 1FK7063-5AH71-1AH0 SN: YFU336906302001, professionally overhauled and tested with a 12-month warranty, 100% functional, scope of delivery as shown in photos. The agreed sales discounts do not apply to this item. Please inquire separately for the price! Fodpfxov Tgkqo Akhsgf

Condition: ready for operation (used), KUKA 1FK7060-5AF71-1ZZ9-Z S03 servo motor, serial number YFC351073922006, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fjdpoztulfofx Akhjgf

Condition: ready for operation (used), Siemens 6FC5357-0BA20-0AE0 NCU SN T-00R877409,professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos,The agreed sales discounts do not apply to this item. Please ask for price separately! Fedorn Endopfx Akhsgf