Used Einlegegitter Grating for sale (358)

Year of construction: 2023, condition: as good as new (ex-display), Technical data: Inlet width mm. 650 Chopping height mm. 300 Output approx. 70 - 80 srm/h wood chips Chipping length approx. mm. 25 to 30 Infeed rollers piece 4 Rotor flight circle mm. 800 Chipping knife piece 2 counter knife piece 1 Feed motors kW 2x4,0 with cardan shaft weight approx. 7.000 Kg. infeed : horizontal Machine base : steel, gas-shielded welded Bodpfsncd Dujx Ad Aolg Rotor : steel, inert gas welded, dynamically balanced. Bearing : Oversized roller bearings. Bearing housing : steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Hydraulic system consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding by 2 gear motors, direct engagement, NORD GEAR.

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Blodpfx Adoncd Aze Asg Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Condition: new, empty load weight: 890 kg, maximum load weight: 2,610 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,600 mm, loading space width: 1,800 mm, loading space height: 950 mm, loading space volume: 6.5 m³, color: silver, construction height: 1,750 mm, working width: 1,920 mm, Leaf grate attachment / E-hydraulics / Ramp shaft / High front grille, Automatic reverse drive, Hot-dip galvanizing, Roof window, * IMMEDIATELY AVAILABLE * incl. Leaf grate attachment / E-hydraulics / Ramp shaft / High front grille TECHNICAL DATA - Make: Debon - Vehicle type: Three-way tipper - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 360 x 180 x 95 cm - External dimensions (L x W x H): 500 x 192 x 175 cm - Loading height of floor: 68 cm - Perm. Gross vehicle weight: 3,500 kg - Unladen weight: 890 kg - Payload: 2.610 kg - Chassis: High loader (wheels under the body) - Tyres: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, can be retrofitted EQUIPMENT - Brake: Yes - Number of axles: 2 - Floor: Galvanized steel plate on Finnish wooden multiplex plate - Drop sides: Anodized aluminium, double-walled double-walled - Dropside height: 35 cm - Dropside folding: 4-sided - Dropside removable: 4-sided - Dropside hinges: 3 lateral / 2 front+rear, screwed - Corner stanchions removable: Yes, all removable - Locks: Eccentric locks - Swing tailgate: No - Number of pallet spaces: 5 - Multifunctional vehicle: No - Tipping / lowering function: Can be tipped on three sides - Hydraulic pump: Electric pump - Number of cylinder stages: 5-stage - Tipping angle (R/S): 45 - Battery charging function: via. Charging function battery: via charging socket with optional charger - Overrun device/brake: KNOTT - Frame/chassis: welded steel frame - Galvanization: hot-dip galvanized - Drawbar: V-drawbar, continuous, C-profile - Mudguards: plastic mudguards - Superstructures / attachments: Grid attachment - Ramp shaft: Yes - Ramps/ramp flap: Optional - Ramp type: - - Ramp load: - - Drive-on angle: - - Supports: Optional, can be retrofitted - Lashing eyes: 8 - Rear lighting: bulbs, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: COC papers DESCRIPTION - Anodized aluminium drop sides double-walled - Drop sides foldable at the side and rear - Drop sides removable - Steel plate on wooden floor in Finnish quality - E-hydraulics with battery - H-frame removable at the front - Ramp shaft pre-equipped - Sturdy welded steel frame - Frame compl. hot-dip galvanized - hot-dip galvanized leaf grate - original Debon - 3-sided swinging - can be dismantled without tools - height: 60 cm - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 8 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large rear lights Plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - emergency hand pump - side wall attachment - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Ste Blsdpfju Hr N Nox Ad Aog

Condition: new, *IMMEDIATELY AVAILABLE* Including continuous ramp 150 cm / Low loading height / Floor-mounted lashing eyes Technical Data: • Brand: Martz • Model: BAU-3 300/2 S • Vehicle type: Construction machine trailer • Vehicle condition: New vehicle • First registration: None • MOT/Technical Inspection: 2 years from first registration • Internal dimensions (LxWxH): 298 x 153 x 25 cm • External dimensions (LxWxH): 499 x 211 x 162 cm • Loading height (floor): 34 cm • Permissible gross weight: 2,700 kg • Unladen weight: 545 kg • Payload: 2,155 kg • Chassis: Low loader (wheels beside the platform) • Tyres: 195/50R13C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes, automatic • 100 km/h approval: Optional, retrofittable DESCRIPTION • Robust, walkable steel mudguards • Grating step boards at rear on both sides • Phenolic plywood floor, continuous jointless, anti-slip, and waterproof • Very stable welded steel frame • Frame fully hot-dip galvanized • Steel ramp, upright on shaft, 164 cm • Heavy-duty eccentric locks • Corner posts with tool-free removable locks for rear panel • Insertion points in all 4 corners for tarpaulin fittings, mesh sides, sidewall extensions, or front wall extension • Robust support feet at the ramp • Ramp lifting aid • Very low chassis for shallow approach angle • With bucket support • 10x recessed lashing rings in the side frame profile (1000daN/kg) TÜV certified • Three-sided perforated rail (Combi Protect Rail), can also be used with load bars and lashing straps – round holes 25 mm, elongated holes 54x25 mm • Maintenance-free rubber torsion axles by BPW/AL-KO • Automatic reverse function • BPW/AL-KO overrun brake and parking brake • Very stable bolted V-drawbar REINFORCED • 13-pin connector • Reversing lights • Large safety lighting system • Directional tail lamps • Integrated rear fog light • Lighting recessed in rear frame • Centrally positioned automatic jockey wheel Optional retrofittable accessories – please inquire: • 100 km/h approval with shock absorbers • Anti-theft device • Spare wheel • Tool box • Reversing lights • Lashing straps • ...and much more New vehicle with warranty and MOT. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration certificate can be sent in advance or transit plates (Germany) can be provided - Export plates including customs clearance available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 Bledpfx Adex Tbkwj Asg 46419 Isselburg Over 1,200 trailers immediately available! For more than 30 years, we have been specialist dealers and repair workshop for Brian James, Blyss, Debon, Humbaur, Hapert, Unsinn, Cheval Liberte, Ifor Williams, Koch, Lorries, Martz, Stedele, TPV, Tohaco, Vezeko, Variant, Vlemmix, and many more brands. - Errors, omissions, and prior sale excepted -

Condition: new, empty load weight: 680 kg, maximum load weight: 2,320 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,030 mm, color: silver, construction height: 830 mm, working width: 2,040 mm, Hydraulics, automatic reverse drive, full aluminium floor / winch / drive-on ramps, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. full aluminium floor / winch / drive-on ramps Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,000 kg - Unladen weight: 680 kg - Payload: 2,320 kg - Interior dimensions: 400 x 203 x 0 cm (L x W x H) - Overall exterior dimensions: 537 x 204 x 83 cm (LxWxH) - Loading sill height: 60 cm - Tyres: 195/55R10 steel rim - Brakes: yes - Support wheel: yes, automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - Floor: full aluminium floor! - Drop sides: optional retrofittable - Drop side height: 0cm - Chassis: high loader, KNOTT rubber spring axle - Tipping function: no - Hydraulics: none - Drive-on angle: approx. 13 - Wheel stops: prepared front & rear - Overrun device & brake: KNOTT - Frame/chassis: welded hot-dip galvanized steel frame - Lashing eyes: 14 in the floor - Winch: yes. manual, with adjustable winch bracket - Supports: at extra charge Ramps: solid steel, grating can be slid underneath 255cm long - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - 18mm aluminum floor - extremely robust - preparation for drop sides - cable winch with cable winch bracket standard - cable winch removable and can be inserted on the left or right, as well as adjustable in length - very stable welded steel frame - frame cpl. hot-dip galvanized - many sturdy cross beams for high point loading - additional longitudinal struts welded throughout - 14 lashing eyes inside the loading area - steel grid ramps can be inserted under the loading area, L=255cm - automatic reverse drive - KNOTT overrun device and parking brake - KNOTT cast coupling head - very sturdy V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing light - very sturdy V-drawbar plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic support wheel in the middle - registration papers: ZBII and COC papers Accessories can be retrofitted - please enquire: - 100 km/h approval with shock absorbers - anti-theft device - drop sides - wheel stoppers - spare wheel - storage box - rear supports - high tarpaulin - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Blodpfx Adsu Hrw Ho Ajg

Condition: new, empty load weight: 960 kg, maximum load weight: 2,540 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,600 mm, loading space width: 1,800 mm, loading space height: 950 mm, loading space volume: 6.5 m³, color: silver, construction height: 1,750 mm, working width: 1,920 mm, Leaf grate attachment / E-hydraulics / Ramp shaft / High front grille, Automatic reverse drive, Hot-dip galvanizing, Roof window, * IMMEDIATELY AVAILABLE * incl. Leaf grate attachment / E-hydraulics / Ramp shaft / High front grille TECHNICAL DATA - Make: Debon - Vehicle type: Three-way tipper - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 360 x 180 x 95 cm - External dimensions (L x W x H): 500 x 192 x 175 cm - Loading height of floor: 68 cm - Perm. Gross weight: 3,500 kg - Unladen weight: 960 kg - Payload: 2.540 kg - Chassis: High loader (wheels under the body) - Tyres: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, can be retrofitted EQUIPMENT - Brake: Yes - Number of axles: 2 - Floor: Galvanized steel plate on Finnish wooden multiplex plate - Drop sides: Anodized aluminium, double-walled double-walled - Dropside height: 35 cm - Dropside folding: 4-sided - Dropside removable: 4-sided - Dropside hinges: 3 lateral / 2 front+rear, screwed - Corner stanchions removable: Yes, all removable - Locks: Eccentric locks - Swing tailgate: No - Number of pallet spaces: 5 - Multifunctional vehicle: No - Tipping / lowering function: Can be tipped on three sides - Hydraulic pump: Electric pump - Number of cylinder stages: 5-stage - Tipping angle (R/S): 45 - Battery charging function: via. Charging function battery: via charging socket with optional charger - Overrun device/brake: KNOTT - Frame/chassis: welded steel frame - Galvanization: hot-dip galvanized - Drawbar: V-drawbar, continuous, C-profile - Mudguards: plastic mudguards - Superstructures / attachments: Grid attachment - Ramp shaft: yes - Ramps/ramp flap: yes - Ramp type: aluminum ramps - Ramp load: 3000kg - Drive-on angle: 18 - Supports: Yes - Lashing eyes: 8 - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: COC papers DESCRIPTION - Anodized aluminum side walls double-walled - Side walls foldable at the side and rear - Side walls removable - Steel plate on wooden floor in Finnish quality - E-hydraulics with battery - H-frame removable at the front - Ramp shaft pre-equipped - Sturdy welded steel frame - Frame compl. hot-dip galvanized - hot-dip galvanized leaf grid - original Debon - 3-sided swinging - can be dismantled without tools - height: 60 cm - 3t drive-on ramps and rear supports - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 8 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large reversing light - electric hydraulic battery Plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - emergency hand pump - side wall attachment - spare wheel - storage box - battery - 230V charger - flat tarpaulin - net hooks - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsin Blsdpfju Hr Rgox Ad Aog

Condition: new, empty load weight: 560 kg, maximum load weight: 2,140 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,140 mm, color: silver, construction height: 900 mm, working width: 2,190 mm, Hydraulics, automatic reverse drive, tiltable perforated plate lanes / drive-on ramps, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * tiltable perforated plate lanes / drive-on ramps Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,700 kg - Unladen weight: 560 kg - Payload: 2,140 kg - Interior dimensions: 400 x 214 x 0 cm (L x W x H) - Overall exterior dimensions: 515 x 219 x 90 cm (LxWxH) - Loading sill height: 61 cm - Tires: 195/55R10 steel rim - Brake: yes - Support wheel: yes, automatic - 100km/h: at an extra charge - incl. Vehicle documents Vehicle superstructure: - Floor: perforated plate tracks - Drop sides: - - Drop side height: 0 cm - Chassis: high loader, KNOTT rubber spring axle - Tipping function: no - Hydraulics: none - Drive-on angle: approx. 13 - Wheel stop: prepared - Overrun device & brake: KNOTT - Frame/chassis: galvanized steel frame - Lashing eyes: holes left in the floor - Winch: optional - Supports: Support by tiltable rear - Ramps: solid steel, inserted grating - Lighting plug: 13-pin - Approval: ZBII & COC papers Standard equipment: - Tipping bridge can be mechanically tilted via shock absorbers - Galvanized tipping bridge - Very stable steel frame - Lashing holes inside the loading area - Ramps made of steel grating can be pushed into the loading area - Automatic reverse drive - KNOTT overrun device and parking brake - KNOTT cast coupling head - Very stable V-drawbar REINFORCED - 13-pin plug - Reversing light - Large lighting system - Large lighting plug plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: ZBII and COC papers Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - anti-theft device - wheel stopper - spare wheel - storage box - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Blsdpfeu Hrwmsx Ad Aeg

Condition: new, empty load weight: 890 kg, maximum load weight: 2,610 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,300 mm, loading space width: 1,860 mm, loading space height: 950 mm, loading space volume: 6.3 m³, color: black, construction height: 1,630 mm, working width: 1,920 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * TECHNICAL DATA - Make: Debon - Model: PW3.3 - Vehicle type: Three-way tipper - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 330 x 186 x 95 cm - External dimensions (L x W x H): 467 x 192 x 163 cm - Loading height of floor: 68 cm - Gross vehicle weight: 3,500 kg - Unladen weight: 890 kg - Payload: 2.610 kg - Chassis: High loader (wheels under the body) - Tyres: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, retrofittable DESCRIPTION - Black anodized double-walled aluminium drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Steel plate on wooden floor in Finnish quality - E-hydraulics with battery and emergency hand pump - Removable front H-frame - Ramp shaft pre-equipped - Sturdy welded steel frame - Frame compl. hot-dip galvanized - hot-dip galvanized leaf grate, 60cm, 3-sided swinging, unmounted - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 8 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large rear lights Plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Bljdju Htzyepfx Ad Ajg

Condition: new, empty load weight: 960 kg, maximum load weight: 2,540 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,300 mm, loading space width: 1,860 mm, loading space height: 950 mm, loading space volume: 6.3 m³, color: black, construction height: 1,630 mm, working width: 1,920 mm, Ramps / supports / grid attachment / electro-hydraulics with emergency hand pump / ramp shaft / high front grid, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. ramps / supports / grid attachment / electro-hydraulics with emergency hand pump / ramp shaft / high front grid TECHNICAL DATA - Make: Debon - Model: PW3.3 - Vehicle type: Three-way tipper - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 330 x 186 x 95 cm - External dimensions (L x W x H): 467 x 192 x 163 cm - Loading height of floor: 68 cm - Gross vehicle weight: 3,500 kg - Unladen weight: 960 kg - Payload: 2.540 kg - Chassis: High loader (wheels under the body) - Tyres: 195/50R13C - Chassis: KNOTT rubber spring axle - Support wheel: Yes, automatic, 500 kg - 100 km/h approval: Optional, retrofittable DESCRIPTION - Black anodized double-walled aluminium drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Steel plate on wooden floor in Finnish quality - E-hydraulics with battery and emergency hand pump - Removable front H-frame - Ramp shaft pre-equipped - 2x aluminium ramps for tipper - 2x folding heavy-duty support leg, telescopic - Hot-dip galvanized leaf grate, 60cm, 3-sided swinging, unassembled - Sturdy welded steel frame - Frame compl. hot-dip galvanized - maintenance-free rubber spring axles - automatic reverse drive - overrun device and parking brake - 8 lashing brackets inside the side edge - eccentric locks - sturdy V-drawbar - 13-pin plug - reversing lights - large reversing lights Plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - spare wheel - storage box - battery - 230V charger - flat tarpaulin - net hooks - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Bledpfxsu Ht Ads Ad Asg

Condition: new, Year of construction: 2021, loading space volume: 8 m³, Straw de-ironizing container    • Capacity: 7.5 m3    • Lifting eyes    • Fork pockets    • Detachable grates    • Fully customizable! Condition: New Bljdpfx Adsykccue Ajg Year of manufacture: 2021

Condition: new, maximum load weight: 36,461 kg, overall weight: 49,500 kg, axle configuration: 3 axles, total width: 2,480 mm, total height: 860 mm, Year of construction: 2026, Technical Description Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm thick hardwood flooring. Loading Platform: Loading platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel of approx. 1,000 mm x 8°. 6 pairs of outward-folding lashing rings (LC 5,000 daN). 2 pairs of outward-folding lashing rings (LC 10,000 daN). 1 pair of inward-folding lashing rings on the front central beam (LC 10,000 daN). Grating flooring C40/4 (point load 2.3 t on an area of 20 x 20 cm), over the axles with chequer plate covering. Two-Part Steel Ramps: One pair of galvanized, two-part steel ramps approx. 3,185 + 1,420 x 1,250 mm with grating flooring C40/5 (point load 8 t on an area of 20 x 20 cm). Ramp with hydraulically foldable ramp sections and hydraulic lifting system. Maximum load per pair: 40,000 kg In accordance with regulation 1230/2012/EU, ramps less than 300 mm in length do not count towards the vehicle length of 16,500 mm in driving position. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: Tyres 235/75 R17.5 3PMSF as per manufacturer’s choice. TPMS: TPMS tyre pressure monitoring system as per ECE R 141. Data transmission to the tractor unit via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to receive and display these data. Axles: BPW axles and suspension, 2 fixed axles, 1 self-steering trailing axle. Technical axle load: 12,000 kg Electromagnetic reverse lock, activated via reverse gear and manually. Air suspension with raise and lower valve. Axle tools included. Brake System: WABCO braking system compliant with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit. Electrical System: Electrical system compliant with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3). Bsdpow Dl Hwsfx Ad Ajlg All LED side marker lights flash with the indicator. ASPÖCK-UNIBOX on the front connector strip with 24N, 24S & 15-pin sockets. Connection according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Structure: Steel frame made of high-strength fine-grain steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) – S690QL/S700MC (yield strength 690 MPa) Tarp Structure: Tarp structure approx. 3,960 mm – Galvanized front wall with a tensioning mechanism for the sliding curtains. – “EDSCHA” roof, forward-sliding on aluminum roof rail profiles (bolted to front and rear walls). – 3 pairs of movable stanchions on the loading platform. – Body can be hydraulically widened at the rear by approx. 750 mm to the left and right. – Sliding roof with upward-swinging portal carrier. – Sliding tarp with 700 mm length reserve and tensioning straps at approx. 600 mm intervals. Height to top edge of structure approx. 3,960 mm (loaded). – Driving with open sliding roof is not permitted and will cause damage to the tarp. Painting: Entire steel structure is automatically shot-blasted after welding using a blasting wheel system. Second blasting treatment with corundum for optimal coating adhesion. Full metallizing of the entire chassis with ZINACOR 850 (85% zinc / 15% aluminum) for best corrosion protection. Top coat with 2 layers of 2K finish, single-color in a shade of your choice according to the RAL 841GL standard. Rear section metallized and coated in RAL 9010 (pure white). No metallic paint.

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, 3-axle MULTIMAX PLUS low-bed semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h Legal Gross vehicle weight: 49,500 kg / 31,500 kg Fifth-wheel load: 18,000 kg Axle load: 31,500 kg / 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm King pin trailing radius (rearwards) approx.: 2,100 mm Saddle height loaded approx.: 1,205 mm Loading platform length approx.: 9,600 mm Extendable by approx.: ? Loading platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm Gross vehicle weight depending on fifth-wheel load: Yes Special permit is required for exceeding country-specific regulations. Technical Description Gooseneck: Gooseneck in SNT Design for optimized loading platform length, length approx. 3,900 mm, rear with chamfer approx. 1,000 mm x 6°. Technical fifth-wheel load: 18,000 kg. For tractor units: 4 x 2 and 6 x 2. Loading platform: Loading platform, length approx. 9,600 mm with rear chamfer approx. 900 mm x 6°. Loading platform behind the gooseneck hydraulically raisable and lowerable, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-part AXS steel ramps approx. 4,920 mm long and approx. 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Ramps can be hydraulically shifted individually by approx. 235 mm outwards and approx. 365 mm inwards. Maximum load capacity and approach angle per technical data sheet: C470319 Maximum ramp angle with lowered loading platform: 9° Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg Air suspension with lift/lower valve. Axle tool kit. Tyres: 235/75 R 17.5 3PMSF twin tyres. Manufacturer of our choice Load index 143/141J (144/144F) Braking system: WABCO EBS-E braking system according to EU regulations. Without connecting cable to tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" version as per EU regulations. (ASS 3) Metalizing: Complete HRM metalizing (High Resistance Metallisation) Complete steel structure shot blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Aluminium 15%). Painting 6K final treatment: Complete steel structure shot blasted after welding. 1 coat zinc-based primer, 1 coat bonding primer. Final painting with 2 coats 2K (acrylic) single-colour in RAL shades of your choice, then cavity sealing with special wax. Rims in silver. Blsdpfx Asizu Nted Ajg Multi-colour and special painting at extra cost. Steel construction: Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified to DIN-EN 287-1. MAG welding process to EN ISO 4063. Protective gas M21 per EN ISO 14175 Front wall of steel, plug-in, approx. 400 mm high Connection board for supply lines to the tractor unit at the height of the outer frame profile. ASPÖCK-UNIBOX at the front plug connection board with sockets 24N, 24S & 15-pin. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 If your pin configuration deviates from the ISO standard, please inform us. “Anderson” socket at the front connection board. Rema 78051-00 & Amp. 150 V. Cable for supply to electro-hydraulic unit and/or electric winch (35 mm²,

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. Bledsfyadbepfx Ad Ajg For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 511001M, nominal power: 160 kW (217.54 HP), Complete and fully functional Lindemann ZB 120 x 100 Bljdpfx Aoyizcqod Aeg - 160kW Schorch drive - Voith fluid coupling - Feed steel slat conveyor - Cyrus extraction vibrator - Axle puller - Hydraulic unit - Spare grates - Hammers - Various wear parts

Condition: new, neu ca. 4 Monate ab Auftragse Italien 72500 € 1370.25 € 35 to 500 mm 700x350 mm 700x500 mm 600 mm 250 mm 125 mm/s 43 mm/s 9 mm/s 68 mm/s 4 kW 1100 mm 1400 mm 2300 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Bljdpfsynndlex Ad Ajg Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following "IV enclosure" OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns

Condition: new, neu ca. 4 Monate ab Auftragse Italien 138000 € 2608.2 € 170 to 500 mm 870x500 mm 1000x600 mm 600 mm 300 mm 110 mm/s 42 mm/s 7 mm/s 70 mm/s 19 kW 1500 mm 1950 mm 2650 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Bedpjynmx Usfx Ad Aslg Siemens CPU Lateral fixed protrection grates CE certification following "IV enclosure" OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns

Condition: new, neu ca. 4 Monate ab Auftragse Italien 89700 € 1695.33 € 85 to 500 mm 700x400 mm 800x600 mm 600 mm 300 mm 105 mm/s 41 mm/s 7 mm/s 58 mm/s Bodpfxjynmxzs Ad Aslg 7.5 kW 1200 mm 1600 mm 2500 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following "IV enclosure" OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns

Condition: new, neu ca. 4 Monate ab Auftragse Italien 79500 € 1502.55 € 60 to 500 mm 700x350 mm 700x500 mm 600 mm 250 mm Bjdpfxjynmxuo Ad Aolg 120 mm/s 38 mm/s 8 mm/s 58 mm/s 5.5 kW 1100 mm 1500 mm 2350 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following "IV enclosure" OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT45001013946, empty load weight: 12,100 kg, maximum load weight: 37,900 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 01/2025, loading space length: 9,200 mm, loading space width: 2,480 mm, loading space height: 3,200 mm, total length: 13,750 mm, total width: 2,550 mm, total height: 4,070 mm, suspension: air, tire size: 205/65 R 17,5 ", maximum speed: 90 km/h, color: blue, Year of construction: 2024, Equipment: tail-lift, The images shown are archive photos; the vehicle may still be in use! Jumbo Low Loader Chassis for construction machinery transport up to 36,000 kg and a maximum external machine width of 2,500 mm. Fifth wheel plate with replaceable 2" king pin. Rear slope approximately 1,500 mm long at 7°. Ramp shaft closed at top with steel/checker plate. Bjdpfxjylkyws Ad Aolg Trailer B-dimension: 12,000 mm Free rear swing radius approx.: 2,350 mm Spare wheel carrier with 1 spare wheel Plastic toolbox In the low-bed: Omega rail laterally below the outer frame as a lashing bar for tarpaulin and spacer holders for lashing pins, not within the wheel area. Lashing Points: Gooseneck: - 5 pairs of lashing points recessed in outer frame, each rated at 5 t - 2 pairs of lashing pins recessed on top and side of outer frame, each rated at 10 t Low-bed: - 7 pairs of lashing pins recessed on top and side of outer frame, each rated at 10 t - 9 pairs of lashing points recessed in outer frame, each rated at 5 t - 3 pairs of additional folding lashing points recessed in the low-bed floor, each 10 t (1x before the drop, 1x in front of the 1st axle, 1x behind the 3rd axle) Axles & Suspension: - Drum brake axles - Last 2 axles self-steering - Air suspension with lift & lower valve + auto-reset function - Raise & lower function with quick release Wheels and Tires: - 205 / 65 R 17.5 for 8,000 kg axle load technical max. at 90 km/h - Steel rims twin arrangement Brake System: - 2-line air brake system - Spring-loaded parking brake - 2 non-interchangeable coupling heads at front, without connecting line - Knorr EBS Electrics: - 2 pairs of double LED warning panels, extendable - 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front - 24 Volt, multi-chamber LED lights - Flashing side marker lights - Beacon with holder - Interior LED work light on front wall - 2 additional LED work lights at rear, switched via reversing light Floor: - Floor designed for maximum forklift axle load of 10,000 kg at minimum 300 mm tire width (note: deformation possible!) Stakes: - 3 pairs of sliding stakes, movable along entire length, with four insert sockets each; only the rear 2 zones are of equal length! - Stake positions: 1x gooseneck, 3x in low-bed Insert Slats: - 5 rows of wooden insert slats Access Ramps: - Ramp surface with "Mega Grip" serrated grating (max. forklift axle load 9,000 kg at min. 200 mm tire width) - Hydraulically operated via independent electric unit installed in stainless steel box front-right, including ramp control; additional operation via radio remote control incl. rear support operation, customer's responsibility! NATO socket on truck required, including connecting line to truck as spiral cable; connection line must NOT be connected while driving! Truck not included. - Steel ramp full width, approx. 3,300 mm long + 3-part aluminium foldable section approx. 900 mm for total ramp length 4,100 mm; if necessary, additional phenolic board max. 9 mm thick under aluminium sections for reduced ramp angle; ramp load capacity 26,000 kg, heavy-duty version; over ramp shaft steel/checker plate; ramp secured during transit with top link. Exact specification available on request!

Condition: new, functionality: fully functional, machine/vehicle number: NEW-14, empty load weight: 627 kg, maximum load weight: 2,073 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 306 170 2700 2 Rear Tipper BRAND-NEW VEHICLE Bledpoghpcasfx Ad Aeg Internal dimensions: 306cm x 170cm Side wall height: 30cm Loading platform height: 66cm Total weight: 2700kg Payload: 2073kg Braked tandem trailer Overrun and handbrake by KNOTT 2 x 1350kg axles with brakes Low chassis Fully welded, hot-dip galvanized steel frame Aluminium profile drop sides with tension locks Drop sides fold down and are removable on all sides 15mm thick, anti-slip, heavy-duty phenolic plywood floor Additional steel plate on wooden floor Automatic jockey wheel with 400kg nose weight capacity 6 noise-reducing lashing rings with 800kg tensile force Reinforced 13" C-type tyres with steel valves M+S tyres Net/rope hooks on the frame 13-pin connector plug Front LED marker lights Rear lights with reversing light, fog light, and triangular reflectors Upper frame mounted on rubber supports Large rear tipping angle of 51 degrees Hand pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Without drop sides (discount) - Increased drop side height to 35cm - Black Edition (powder-coated sides and rims in black) - Integrated loading ramps 2800kg - Electric tipper operation - Battery charger - Remote control - Bluetooth remote control - Emergency hand pump for use with electric operation - Safety supports for maintenance work when vehicle is tipped - Foldable crank rear supports - Complete LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Leaf grating in various heights, also closed - Side wall extensions 30cm with tension locks - Flat tarpaulin with or without hoops - High tarpaulin 160cm or 180cm Further accessories available on request! Price plus shipping to Gera and vehicle registration document: €200 net Pictures are examples and may show optional, surchargeable equipment. Haven't found the right trailer yet? We always have 50-100 vehicles in stock and ready for immediate collection. Our workshop is open for all types of repairs from 8:00 - 17:00 on weekdays. Specialist for axle repairs, also for caravans. Large selection of rental trailers. Additionally, we offer a wide range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or drop by in person.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total length: 800 mm, total width: 4,000 mm, total height: 900 mm, TOP workbench AT 4000 with beech worktop, mobile Stainless steel workbench AT 4000 with beech wood worktop bottom with storage grate drawer unit on the left Dimensions: 4000 x 800 x 900 mm (W x D x H) Used unit, cleaned Top sanded and newly oiled We have more top-quality workbenches in stock! Blodpjykifpsfx Ad Ajg

Condition: new, NEW PRODUCT Price plus VAT. The goods are also available in other quantities and configurations. Included in this package: 11 uprights each 220 cm high x 40 cm deep 60 shelf panels each 130 cm x 40 cm 240 shelf supports 6 diagonal braces with tensioners This results in a single row with 10 bays and 6 levels per bay, total length approx. 1306 cm. 400 meters immediately available! Bjdpfxsyh Dtto Ad Ajlg Manufacturer: META Clip Type: Shelving rack Condition: New Height: 220 cm Length: approx. 1 x 1306 cm Frame depth: 40 cm Design: Boltless system Shelf load: 150 kg per shelf Accessories such as: Floor anchors Connectors Load warning signs Collision protection guards Guard rails Grated shelves Back mesh panels Depth beams Barrier rails and much more... Simply send us your inquiry!

Condition: excellent (used), Year of construction: 2023, 2 x mobile loading ramps, Butt, BKV 1013, 10 t, front axle ramp for straight-line loading – used - : Price ex location: €14,950 (net), including loading! Manufacturer: Butt Model: BKV 1013 Year of manufacture: 2023 Load capacity: 10,000 kg Driveway with grating Total length: approx. 12,500 mm Total width: approx. 2,300 mm Track width: approx. 1,960 mm Lip width: 2,000 mm Lip length: 600 mm Length of the straight upper section: 3,200 mm Ramp height at crossover, height adjustable: 1,200–1,650 mm Blodpfx Adjyhxkte Aog With guardrail Condition: very good Available: immediately Location: 58710 Menden

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately available and short-term delivery vehicles, on our website. Sample of the equipment. Full equipment details available on request. Neck (Gooseneck): * Gooseneck with front corners bevelled approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of external foldable lashing rings (LC 5,000 daN) * 2 pairs of external foldable lashing rings (LC 10,000 daN) * 1 pair of internal foldable lashing rings at the central beam front (LC 10,000 daN) Blsdpoyhkrrsfx Ad Aog * Cut-outs in the outer frame of the platform for hooking in tensioning straps (LC 2,000 daN) * Grating flooring C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), treadplate flooring over the axles Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections * Hydraulic lift unit, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock automatic via reverse gear and manual activation * Air suspension with lift and lower valve Braking System: * WABCO braking system in compliance with EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single-coloured in RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver grey Accessories included: * 2-inch king pin * Galvanized steel front wall approx. 400 mm high * Grating in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating in the platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electric-hydraulic unit at the rear under the platform * Plug-in aluminium side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H). Rear galvanized insert stanchions removable. (Body length approx. 2,560 mm) * Electric winch with radio remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide roller * Bolted approx. 5 t ring for winch cable loop on the neck without deflection pulley * One galvanized toolbox integrated in the sloped gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * 7 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform * Lift axle on the front axle, controlled by TEBS E depending on actual axle load and current loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear taper approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor approx. 30 mm thick Loading area: * Loading area after the gooseneck hydraulically liftable/lowerable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of folding outward lashing rings (LC 5,000 daN) * 2 pairs of folding outward lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over the axles checker plate Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding in/out ramp sections. Hydraulic lift system, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: 235/75 R 17.5 3PMSF – Manufacturer of our choice TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final paint in 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver grey Including accessories: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating in the gooseneck taper C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in rear taper of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Non-slip sand paint on the checker plates above kingpin and loading area * Electro-hydraulic unit at the rear under the loading area * On the gooseneck: plug-in aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized drop-in stakes are removable. (Body length approx. 2,560 mm) * An electric cable winch with radio remote control, approx. 5,400 kg pulling force, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide pulley * Bolted 5 t ring for cable winch deflection on the neck without deflection pulley * One galvanized toolbox integrated in the beveled gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition Bjdpfxsyhkqzj Ad Aelg * 7 pairs comple...