Used Elephant 2200 Demolition Hammer for sale (2,519)

Condition: excellent (used), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rates: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal ± 0.8 K Spatial ± 2.0 K Heat compensation max. 8000 W Ledpfx Aoziixroa Rsrr Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% rH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% rH Temperature uniformity: Spatial ± 1.0 K Heat compensation max.: 500 W Test chamber volume: 2,160 liters Test chamber dimensions: Height 1,115 mm, Width 1,400 mm, Depth 1,400 mm External dimensions (lowered): Height 2,318 mm, Width 1,860 mm, Depth 3,658 mm External dimensions above shaker: Height 2,710 mm External dimensions max. stroke height: 3,038 mm Exchangeable floor dimensions: Width 1,600 mm, Depth 1,504 mm Operating Data: Rated voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2,100 kg Important information for your safety as a buyer: The following points will be carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with refrigerant compliant with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), functionality: fully functional, Krupp/Hydraulic Hammer/Demolition Hammer/Chisel • Quick coupler: CW30, used • 2 hydraulic connections • Total weight: 1500 kg • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, Lsdpozi Dnzjfx Aa Rsrr - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Lrodpfjzc N T Rex Aa Rsr Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) The machine is designed for operation with an electric turntable. The machine has an inverter to control the servomotor in the rotary table and an interface for connecting the rotary table Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: new, Year of construction: 2026, TRV 2200: The Perfect Optimizer for Companies Aiming to Stay Competitive The TRV 2200 is the most produced optimizer with the best quality/price ratio in its category, designed to radically transform the production cycles of companies. Here’s why it’s the ideal choice for those seeking superior performance, reliability, and innovation: Lodsv Iqdqjpfx Aa Rsrr Unbeatable Speed: With a speed limited to 300 ml/min, the TRV 2200 provides a rapid and smooth workflow, maintaining consistent efficiency. Maximum Precision: Ideal for cutting finished profiles, it guarantees a level of precision that meets even the most demanding requirements. Modular Design: The modular structure allows for customization that perfectly adapts to the needs of every company, optimizing space and production flows. Multi-accessorized: Equipped with numerous accessories for every need, offering unparalleled versatility. Excellent for Every Sector: Whether it's furniture, construction, or woodworking, TRV 2200 is a guaranteed success. Global Efficiency and Industry-Leading Performance Cut, optimize, and revolutionize your production processes: TRV 2200 is already the preferred choice for companies worldwide, which purchase it in series to enhance their competitiveness. This is thanks to minimal maintenance due to the elimination of dynamic components and passive transmissions, and a robust and reliable structure that ensures long-lasting results. Advanced Software Features: Over 100 customized cutting plans: widths, quality, and multiple options to optimize the process. Optimization choices between various modes: Commercial value, Waste, Quantity, Length, and Mixed Optimization. Optimization simulation to predict results before production. Accurate control of processed quantities to continuously monitor efficiency. Internal optimization within the machine body, simplifying the process and recovering valuable space. High-Quality Cutting Unit: Tested conveyor drive system without engaging parts, combined with rubber anti-slip pressure wheels for universal use on various materials. High precision cutting, even with wet and curved boards, thanks to the use of durable materials that ensure constant speed and quality. Sectors Where TRV 2200 Excels: Semi-finished furniture components Parquet Windows and doors Laminated boards, slats, and structures Doors, frames, skirting boards, and construction Don’t miss the opportunity to discover how TRV 2200 can transform your production cycle. Watch the video to see its exceptional performance in action!

Year of construction: 2013, condition: used, This listing is for Agilent Technologies 2200 Tapestation The unit is in full working condition and ready for immediate use This automated electrophoresis system provides rapid, scalable analysis of DNA, RNA, and proteins. It accelerates sample quality control workflows using minimal sample volumes Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Lrsdpezgfpnefx Aa Rjr Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. Ljdpfx Aaoyxxxve Rerr The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  - Capacity: 12 – 14 cycles/min (tray former) - Application: Carton forming and sealing - Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing - Utilities: - Voltage: 3 × 400 V - Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) - Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) - Air pressure: 0.6 – 1.0 MPa - Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  - Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control - Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration

Condition: good (used), Year of construction: 2005, machine/vehicle number: 12345, functionality: fully functional, Used hydraulic forging hammer Manufacturer: LASCO Type: HOU 250 SO Year of manufacture: 2005 Lrodpfx Aszidv Sja Rer Impact energy 40 kJ, ram stroke 710 mm, ram weight 3,000 kg, machine foundation with spring damping elements, conveying system by STAHLMANN, two-module design, work platform, automatic feeding, infeed and outfeed, water cooling.

Condition: new, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #442 Mercedes-Benz Actros 2546 L 6x2 / FFG elephant multi 11.003 MSR Water Recovery Unit FFG Umwelttechnik, Flensburg * Tank material S355J2+N * Combined high-pressure jetting and sludge suction vehicle with water recovery * Permissible operating overpressure: -1 / 0.5 bar * Approx. 11,000 liters tank capacity (air volume) * Approx. 8,200 liters max. sludge capacity * Approx. 6,600 liters max. water capacity * Discharge with thrust piston and three piston positions * Automated piston mechanism with sealed lid * FFG elephant comfort pro control system (CAN-Bus) * FFG elephant connect * Automatic water recovery Chassis Mercedes-Benz Actros 2546 L 6x2 * TipMatic * 455 HP / 335 kW Lredpowv Dg Tjfx Aa Rjr * EURO 6 * Fuel capacity approx. 290l * Chassis color Novagrau * Cab color MB 9147 Arctic White * Air conditioning * Navigation * Refrigerator * Multimedia cockpit Vacuum system Samson TruckMaster 2500 with approx. 2,200 m³/h * Water ring pump * Low-maintenance belt drive High-pressure system URACA P3-45 G60 * approx. 340 l/min at 205 bar * Low-maintenance belt drive Reel system FFG multifunctional boom XL * Max. reach approx. 6,200 mm (telescopic) * Hydraulic swivel range approx. 200° * Parallel guidance for high-pressure and suction hoses * High-pressure reel on tank crown for 200 m DN 25 * Hose length measurement device DN 25 * Second high-pressure reel on boom for 80 m DN 13 (hydraulic) * Suction hose reel for approx. 20 m DN 125 on tank crown Features hydraulic cable winch on boom * Tiltable scrap box * Vice * Mountings * Warm hand wash station * 7 work lights * 4 rotating beacons and LED flashers front and rear * Reversing camera * Hose holder and closed equipment locker * Heated wardrobe * Compressed air connection for air-bleed filling * Various holders for tools and equipment Technical Data GVW 26,000 KG * Unladen weight 18,975 KG * Length 8,990 mm * Height 3,650 mm * Width 2,550 mm For further detailed information and/or pictures, please contact us directly. A wide range of additional vehicles for PURCHASE or RENT is available at: Subject to change, prior sale, and errors. The buyer is obligated to independently verify the condition and equipment of the goods. Sale is exclusively in accordance with our terms and conditions and excludes any warranty. Chassis - Special Equipment: Axle load measuring device, front axle load 9.0 t, Audio system: Digital radio DAB / DAB+, Right exterior mirror with maneuvering position, Battery 220 Ah, Interactive multimedia cockpit, Driving assistance system: High beam assistant and cornering light, Suspension: Front springs 9.0 t, 3-leaf, Fire extinguisher, Tinted windscreen with sun strip, Vehicle without trailer brake, Vehicle without trailer coupling, Generator 150 A, 12-speed transmission - Type: G 330-12, Transmission lock independent of gearbox, Rear axle ring gear 300, Three-part mudguard, Three-part mudguard with splash protection, Cooling box / refrigerator, Two-cylinder air compressor, Enhanced engine brake, Steerable and liftable trailing axle 9 t, PTO both clutch and transmission dependent MB 1,2, PTO MB 131-2c, Programmable special module, Rear frame overhang 1650 mm, Rain sensor, Reverse warning system with acoustic and warning light signal (external alert), Additional remote-control key (2), Circuit breaker, Seat cover / upholstery

Condition: used, Year of construction: 2015, operating hours: 9,560 h, 2015 | Hitachi ZX470LCH-5B | Used Demolition Excavator | 9560 hours 📍Location: Luxembourg 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 122900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Lredpszh Nqfjfx Aa Rjr 64 inspection points 54 approved ✅ 5 imperfect ℹ️ 5 issues ⚠️ 📌 Inspector's Comment: Good used excavator ,Track extraction pins are solid , trackextension cannot be tested , very bad slew ring , boom pins have a lot off play , hydraulicpump not strong enough, welds on machine ( 3 repairs on boom ) left track frame is been repaired , Isuzu engine running good , machine needs Some good attencion before operating 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40280 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 1961, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe Ljdpfxowfpilj Aa Rorr -Condition of machine bed: very good -Machine bed: hardened -Manufacturer: Martin, lead screw and feed screw lathe type DLZ 502 -Turning length: 2200 mm -Turning diameter over bed: 580 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x bezels, tool holder, tools (see photos) -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg

Condition: used, Clamping plate, welding table, welding table, straightening plate -Steel table -Length: 2200 mm -Width: 1255 mm -Height: 705 mm Ljdpfx Aajfcr I Is Rsrr -Panel thickness: 69 mm -Weight: 1396 kg

Condition: good (used), Rotary hammer, chisel hammer, combination hammer, Bosch hammer Ljdpsb A Rl Iofx Aa Rjrr -Drilling/Chiseling -SDS Plus: Recording -Transport case -Weight: 5 kg

Condition: good (used), Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer -Manufacturer: Hitachi, Rotary hammer type DH 25V with transport case -Nominal power input: 600 W Lrodpfxoir E Sye Aa Rsr -Drilling/Percussion drilling -Speed: 0 - 800 rpm -Drilling capacity: Steel 13 mm / Concrete 25 mm -Case dimensions: 445/340/H170 mm -Weight: 10.3 kg

Condition: good (used), Pneumatic demolition hammer, single-arm hammer, pneumatic hammer, jackhammer, chisel hammer -Number: 3x demolition hammer available -Price: per piece -Dimensions: 360/220/H80 mm -Weight: 6 kg Lrsdpfxscm I Uls Aa Rer

Condition: used, Sliding support, linear drive, clamping plate, unit carrier, milled surface, welding table, welding table -Spare part of: a Wotan table boring machine -compatible with: clamping plate ID 21339 Lrodpfx Aasd R Exge Ror -Width at the top: 80 mm -Width at the bottom: 270 mm -Length: 2200 mm -Height: 215 mm -Number: 2x available -Price: complete for both -Transport dimensions: 2200/600 / H300 mm -Weight: 556 kg

Condition: used, Tenoning machine, tenoning machine, tenon hammer, slot rotor, finger jointing system -Recovering rotor: 2.2 kW 5650 rpm -Socket: Ø 30 mm Lrsdpfx Aaocvtzle Rsr -Saw motor: 3.5 kW 2870 rpm -Bore heads: 0.8 kW 2820 rpm -Adjustable drilling distance: 230-560 mm -Frequency converter Perske type: 7.5DW10/2 100 Hz 7.5 kVA -Length stop -Workpiece clamping: pneumatic -pneumatic feed -Dimensions: 1520/1800/H1400 mm -Weight: 1600 kg

Year of construction: 1983, condition: used, Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Manufacturer: Stork-Packo, conveyor belt with high load capacity -Type: SAL-HE 10 -Metal belts: belt width 2 x 150 mm -Conveying length: approx. 2200 mm Lrodpfjgwhvpex Aa Rjr -Drive: without drive motor -Dimensions: 2350/460 / H210 mm -Weight: 127 kg

Condition: used, Year of construction: 2012, Condition: Used, ready for operation • The first unit is equipped with a Ø190 mm calibration roller with a grooved rubber coating, hardness 90 Shore. • The second, combined unit contains a Ø190 mm sanding roller with a grooved rubber coating, hardness 40 Shore. In addition, it includes a hard felt sanding pad mounted on an aluminium rail, with a graphite-grain surface for fine sanding. The pad is equipped with timer-controlled automatic operation. Options: Electronically controlled sanding pad divided into 42 sections. The unit is driven by an independent motor with inverter-controlled speed adjustment and the possibility of changing the direction of rotation. • The third unit is a finishing brush roller. Technical specifications: Working width: 1350 mm Sanding belt size: 1380 x 2200 mm Workpiece thickness: 3–160 mm Motor power of first unit: 11 kW Motor power of second (combined) unit: 11 kW Feed speed: 3–16 m/min Feed motor power: 1.5 kW Pneumatic connection: 6 bar Air consumption: 17 Nl/min Extraction port diameter: 158 mm Extraction air speed: 25 m/min Required extraction capacity: 3095 m³/h Net machine weight: 2450 kg Width: 2320 mm Length: 2030 mm Height: 2050 mm Ledpfx Aajzlxp So Rsrr The table movement is carried out by four large-diameter trapezoidal threaded lead screws, which are mounted externally on the machine frame. Table rollers: one roller is positioned before and one after the feed belt. • The feed belt has a 60 Shore hardness rubber surface with a concave pattern. • Precise tracking of the feed belt is ensured by an automatic centering unit. PRESSURE HOLD-DOWN UNITS • Rubber-coated pressure rollers are positioned before and after the processing units to ensure accurate holding-down of the parts being sanded. SAFETY EQUIPMENT • with CE standards. Options: • Electronically controlled sensing unit for the 42-section sanding pad • Front table extension with two roller cylinders • Rear table extension with two roller cylinders • Complete vacuum table with vacuum pump: 2.2 kW – 3 HP • Electro-pneumatic engagement/disengagement of the contact roller • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Kombi R (drum) Ø190 – electronically controlled sanding pad divided into 42 sections (32 mm pitch) • Electro-pneumatic engagement/disengagement of the contact roller • Electro-pneumatic engagement/disengagement of the sanding pad • Nozzle system for cleaning and cooling the sanding belt. A.S.S. (Air Saving System) • Possibility of reversing the sanding belt rotation direction • Electronic inverter 11 kW (15 HP) • IPC COMPACT 8.5" control panel • Scotch Brite roller Ø200 mm – 1.1 kW – 1.5 HP Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: new, overall weight: 950 kg, Year of construction: 2025, New pulverizer/hydraulic shear for excavators from 7 tons upwards. 360-degree rotation. High crushing force. Lodpfx Ajzkaw Isa Rorr

Condition: used, Year of construction: 2003, MONTABERT DA370ME year 2003, weight kg 2100, caterpillar quick release Ljdeqwcl Hepfx Aa Rorr

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Multi-blade circular saw K34/G/2200 Longitudinal cutting with edge trimming Lrodpfjzh U A Hex Aa Rjr • Feed rate 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 scoring blades

Condition: used, mileage: 18,500 km, power: 315 kW (428.28 HP), first registration: 04/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #423 Mercedes-Benz Actros 2543 L 6x2 / FFG Elephant Multi 11.003 MSR Water Recovery Vehicle Body by FFG Umwelttechnik, Flensburg * Tank material S355J2+N * Combined high-pressure jetting and vacuum suction vehicle with water recovery * Permissible working overpressure -1 / 0.5 bar * Approx. 11,000 liter tank capacity (air volume) * Approx. 8,200 liter max. sludge volume * Approx. 6,600 liter max. water volume * Discharge with telescopic piston and three piston positions * Automated piston system with closed lid * Automatic water recovery * FFG elephant comfort pro (CAN-Bus) control system * FFG elephant connect * Automatic water recovery Chassis: Mercedes-Benz Actros 2543 L 6x2 * TipMatic Ledswv Dgyopfx Aa Rsrr * 455 HP/335 kW * EURO 6 * Fuel capacity approx. 290 l * Chassis color: Novagrau * Cab color: MB 9147 Arctic White * Air conditioning * Navigation * Refrigerator * Multimedia cockpit Vacuum system Samson TruckMaster 2500 with approx. 2,200 m³/h * Water ring pump * Low-maintenance belt drive High-pressure system URACA P3-45 G60 * approx. 340 l/min. at 205 bar * Low-maintenance belt drive Hose reel system FFG Multifunctional Boom XL * Max. reach approx. 6,200 mm (telescopic) * Hydraulically swivels approx. 200° * Parallel guidance for high-pressure and suction hoses * High-pressure hose reel on tank top for 200 m DN 25 * Hose length measuring device DN 25 * Second high-pressure hose reel on the boom for 80 m DN 13 (hydraulic) * Suction hose reel for approx. 20 m DN 125 on tank top Special features for winter operation: HD system operable up to -10°C with heating * Hydraulic cable winch on boom * Tipable scrap bin * Vise * Brackets * Hand washing unit, heated * 7 work lights * 4 rotating beacons and LED flashers front and rear * Rear-view camera * Hose tray and enclosed equipment compartment * Heated wardrobe * Pressurized air connection for air filling * Various holders for tools and equipment Technical data GVW 26,000 kg * Unladen weight 18,700 kg * Length 8,670 mm * Height 3,650 mm * Width 2,550 mm For further detailed information and/or images, please contact us directly. You can find a large selection of more vehicles for SALE or RENT at: Changes, interim sale, and errors excepted. The buyer is obligated to independently verify the condition and equipment of the goods. Sale is exclusively subject to our Terms and Conditions and with exclusion of any guarantee or warranty.

Condition: excellent (used), Carbide saw double side grinder VOLLMER model MULTI DUO 2200 Lredpswdyg Sofx Aa Rsr

Condition: used, Year of construction: 2013, functionality: fully functional, ISC Recycle offers you a high-precision print-and-apply labeling system, ideal for packaging and logistics lines. Brand: MARKEM IMAJE Model: Series 2200 Application system: TAMP BLOW kit Lrsdpfx Aaozgtw Hj Rjr Condition: Used Year of manufacture: 2013 Maximum output: Up to 125 labels per minute Barcode compliance: Barcodes compliant with ANSI standard grades A and B Logistics standard: Compliant with the international GS1 standard Do not hesitate to contact us for more information.

Year of construction: 1997, condition: used, Multi-tool milling unit with pneumatic transfer. Manufacturer: Forplex Model : FNG3 Type: Hammer/pin mill Year: 1997 (2021: full manufacturer retrofit: mechanical, electrical, etc.) Available milling tools: - Pin plate set (rotor / stator) - Hammer plate + sieve ring assembly - Blade plate + sieve ring assembly Capacity : 100 à 3000 kg/h Motor power : 45 kW Door opening safety Pneumatic transfer outlet under the mill Rotor diameter : Ø 440 mm Grid diameter : Ø 450 mm Lrodpfxjzfwvwe Aa Ror Donaldson Dalamatic DLMV 25/12 filter - Year: 1997 (2021: refurbished by Forplex) - Materials: stainless steel - Filter type: bag filters - Cleaning system: pneumatic - Hopper under filter - Air flow, fan : 7.5 kW - Rotary valve Electrical cabinet - Touchscreen HMI for controlling the entire unit - management of the milling unit - safety management - recipe management - variable-speed drive on the mill motor. Mill dimensions : 225 x 113 x 285 cm Weight : 500 kg