Used Elephant Manipulator for sale (366)

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,400 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 900 kg, input current: 16 A, warranty duration: 12 months, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, GLASS CUTTING TABLE - MANUAL - New MODEL: SDRD 2L PU PP Manufacturing year 2025 - brand new We manufacture glass cutting tables in various equipment configurations. Our products are characteristic for top functionality and service life because we processed flat glass and we know what customers expect from these machines. Our tables have been operating for a few years in glass processing plants on 3 continents. Our long-term experience enables us to design a machine whose functionality and quality satisfies the needs of our customers to the fullest extent. TABLE EQUIPMENT: - manually slid supports for vertical loading (covered with replaceable ash trees blocks) - 4 swivelling polyamide castors Ø80 for extreme loads of table movement - 4 adjustable feet for levelling the table in the operation place - table top surface - extremely resistant black felt - table top surface circumference covered with milled ash tree strips - 2 steel panels screwed beneath facilitating loading by means of a forklift - bottom base beam filled with vibrated concrete with steel reinforcement and dispersed concrete from polypropylene fibres in order to increase the stability and rigidity of the structure - pneumatic pivoting (the vertical and horizontal levelling of the table top surface) by means of an actuator with a hydraulic speed controller - breaking strips (breakers: longitudinal and transversal) controlled pneumatically by means of pedals mounted on the sliding foot panel with automatic return - an airbag with installed high pressure fan enabling the easy manipulation of heavy panes on the top surface (the fan is activated by means of a pedal on the foot panel and two additional switches mounted on the top surface circuit blow in the air under the panes, reducing friction significantly) - adjustable height of breaking strips sliding from the table top surface. BASIC TECHNICAL DATA: - weight: 900 kg - top surface size: 340 cm x 240 cm - height: 91 cm (adjustable +/- 2 cm) - electrical connection: 16 A 5 pin plug - air connection: standard 7.2 NW - air working pressure: 7 bar - fan power: 2.2 kW - voltage: 400 V 50 Hz DOCUMENTS ATTACHED TO THE MACHINE: - Declaration of Conformity with the applicable machinery standards Chedsf Sqffspfx Ac Dea - CE Marking - UE EMC Declaration - 12 months’ warranty - User’s Manual (in Polish and in English) This product is supplied ready for operation. Our company can also deliver the table within the EU and to other countries.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,860 mm, total length: 2,800 mm, total height: 910 mm, overall weight: 600 kg, input current: 16 A, warranty duration: 12 months, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, GLASS CUTTING TABLE - MANUAL - New MODEL: SDRM FULL Manufacturing year 2026 - brand new We manufacture glass cutting tables in various equipment configurations. Our products are characteristic for top functionality and service life because we processed flat glass and we know what customers expect from these machines. Our tables have been operating for a few years in glass processing plants on 3 continents. Our long-term experience enables us to design a machine whose functionality and quality satisfies the needs of our customers to the fullest extent. TABLE EQUIPMENT: - manually slid supports for vertical loading (covered with replaceable ash trees blocks) - 4 swivelling polyamide castors Ø80 for extreme loads of table movement - 4 adjustable feet for levelling the table in the operation place - table top surface - extremely resistant black felt - table top surface circumference covered with milled ash tree strips - 2 steel panels screwed beneath facilitating loading by means of a forklift - bottom base beam filled with vibrated concrete with steel reinforcement and dispersed concrete from polypropylene fibres in order to increase the stability and rigidity of the structure - pneumatic pivoting (the vertical and horizontal levelling of the table top surface) by means of an actuator with a hydraulic speed controller - breaking strips (breakers: longitudinal and transversal) controlled pneumatically by means of pedals mounted on the sliding foot panel with automatic return - an airbag with installed high pressure fan enabling the easy manipulation of heavy panes on the top surface (the fan is activated by means of a pedal on the foot panel and two additional switches mounted on the top surface circuit blow in the air under the panes, reducing friction significantly) - adjustable height of breaking strips sliding from the table top surface. BASIC TECHNICAL DATA: - weight: 600 kg - top surface size: 286 cm x 186 cm - height: 91 cm (adjustable +/- 2 cm) - electrical connection: 16 A 5 pin plug - air connection: standard 7.2 NW - air working pressure: 7 bar - fan power: 2.2 kW - voltage: 400 V 50 Hz DOCUMENTS ATTACHED TO THE MACHINE: - Declaration of Conformity with the applicable machinery standards - CE Marking - UE EMC Declaration - 12 months’ warranty - User’s Manual (in Polish and in English) Cjded Tamdspfx Ac Deha This product is supplied ready for operation. Our company can also deliver the table within the EU and to other countries.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,860 mm, total length: 2,800 mm, total height: 910 mm, overall weight: 600 kg, warranty duration: 12 months, GLASS CUTTING TABLE - MANUAL - New MODEL: SDRM FULL Manufacturing year 2026 - brand new Cedpfx Ajh D Rnhsc Djha TABLE EQUIPMENT: - manually slid supports for vertical loading (covered with replaceable ash trees blocks) - 4 swivelling polyamide castors Ø80 for extreme loads of table movement - 4 adjustable feet for levelling the table in the operation place - table top surface - extremely resistant black felt - table top surface circumference covered with milled ash tree strips - bottom base beam filled with vibrated concrete with steel reinforcement and dispersed concrete from polypropylene fibres in order to increase the stability and rigidity of the structure - pneumatic pivoting (the vertical and horizontal levelling of the table top surface) by means of an actuator with a hydraulic speed controller - breaking strips (breakers: longitudinal and transversal) controlled pneumatically by means of pedals mounted on the sliding foot panel with automatic return - an airbag with installed high pressure fan enabling the easy manipulation of heavy panes on the top surface (the fan is activated by means of a pedal on the foot panel and two additional switches mounted on the top surface circuit blow in the air under the panes, reducing friction significantly) - adjustable height of breaking strips sliding from the table top surface. BASIC TECHNICAL DATA: - weight: 600 kg - top surface size: 286 cm x 186 cm - height: 91 cm (adjustable +/- 2 cm) - electrical connection: 16 A 5 pin plug - air connection: standard 7.2 NW - air working pressure: 7 bar - fan power: 2.2 kW - voltage: 400 V 50 Hz DOCUMENTS ATTACHED TO THE MACHINE: - Declaration of Conformity with the applicable machinery standards - CE Marking - UE EMC Declaration - 12 months’ warranty - User’s Manual (in Polish , English)

Condition: excellent (used), Year of construction: 2017, operating hours: 550 h, functionality: fully functional, load capacity: 16 kg, arm reach: 1,610 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant manufacturer: KUKA, teach pendant model: KCP4 (SmartPAD), We offer a complete, fully functional industrial robot set with a controller. This machine has very low operating hours and is ready for use in demanding applications (palletizing, welding, machine tending). The set includes: - Manipulator: KUKA KR16 1610 (reach 1610 mm, payload 16 kg) - Controller: KRC4 - Programmer: KCP4 (SmartPAD) - Complete cabling (power, signal) - Steel pedestal: Dimensions 800x800 mm, height 1000 mm (rigid construction) Installed software packages (KUKA Options): Cedpey Uz Huefx Ac Deha - SafeOperation: Safe limitation of the work area - mxAutomation: Easy integration with external PLC controllers - Profinet ProfiSafe Device: Communication using an industrial standard - RemoteSupportView: Remote diagnostic access - BoardPackage and DiagnoseSafety Key information: - Operating hours: 550 h (almost like new condition) - Technical condition: Functional, tested. - Logistics: The set is secured and strapped onto pallets – ready for immediate transport.

Condition: excellent (used), Year of construction: 2020, The KUKA KR 90 R2700 pro is a versatile, high-speed 6-axis industrial manipulator from KUKA’s KR QUANTEC series. Positioned as a mid-payload standard workhorse, the "pro" variant is optimized for fast cycle times, high cost-efficiency, and space-saving integration in automated production lines. Csdpfxszrl Eys Ac Djha

Condition: used, functionality: fully functional, Year of construction: 1995, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Tauring, controller model: CNC3A, number of rollers: 8, pipe diameter (max.): 60 mm, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, Tube & profiles bending machine ,Tauring Slalom 60-3A 8 rollers for left and right hand bending sense Operation in manual and automatic programmable axis with digital screen readout One-pass bending programmable in different planes manipulator programmable “tube turner” 12 mtrs length tube feeder Cjdpfx Aszi Ew Roc Doha Complete with several set of rolls for tube from 14 to 60 mm - 8 pcs each set = total 140 rolls. Power rotation 3 kw voltage Vac 400/50 power hydraulic bending 2,2 Kw

Condition: excellent (used), Year of construction: 2006, load capacity: 130 kg, arm reach: 2,900 mm, controller manufacturer: KUKA, controller model: KRC2, This system is equipped with a KUKA KRC2 control unit and features the KR 150 L130-2 2000 robot model. The robot offers a payload capacity of 130 kg and a reach of 2900 mm. It is suitable for high-precision applications. Main application areas: Spot and arc welding Heavy-duty material handling Palletizing CNC machine tending Press automation The robot is designed for reliable operation in demanding industrial environments. Model: KR 210 L150-2 2000 KRC2 ed05 Payload: 130kg Arm Reach: 2900 mm Chodew Idw Iepfx Ac Dea Condition: Used & Tested Year: 2006 Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabinet + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs. ( Source : Kuka's Website )

Condition: excellent (used), Year of construction: 2014, load capacity: 240 kg, arm reach: 2,900 mm, controller manufacturer: KUKA, controller model: KRC4, Kuka KR 240 robots are known for their adaptability and flexibility to a variety of applications. Some common applications: - Additive Manufacturing - Assembly - Depalletising - Palletising - Material Handling - Dispensing Model: KR 240 KRC4 R2900 ULTRA Condition: Used & Tested & Refurbished Year: 2014 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant + 6 months of warranty PLC MERKEZI Refurbishment Services Include: Chedjw Hrzajpfx Ac Dsa • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs. (Soruce: Kuka's Website)

Condition: ready for operation (used), Year of construction: 2011, load capacity: 200 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR200-3 COMP Payload: 200 kg Reach: 2700 mm Cjdpezl Sp Ejfx Ac Djha Condition: Used & Tested Working video: will be provided upon request Year: 2011 Included: Manipulator + KRC2 ED05 Cabinet + Teachpendant + All Wire Sets Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs. (Source: Kuka's Website)

Condition: ready for operation (used), Year of construction: 2007, load capacity: 200 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR200-2 COMP Payload: 200 kg Reach in mm : 2700 mm Condition: Used & Tested Year: 2007 (Multiple options available) Included: Manipulator + KRC2 ed05 Cabinet + Teachpendant + All Wire Sets PLC MERKEZI Refurbishment Services Include with additional cost: • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. Csdpfx Acozl Si Se Dsha • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs. (Source: Kuka's Website)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, load capacity: 360 kg, arm reach: 2,830 mm, controller manufacturer: KUKA, controller model: KRC4, The most popular robot series from KUKA, the KR 360 R2830 is sturdy, sleek, versatile, and outfitted with high performance features. Cedozl Sgkspfx Ac Djha The KUKA KR 360 R2830 robot has a repeatability of 0.05 mm. Frequently used in the following applications: - Palletizing -Depalletizing -Material Handling -Additive Manufacturing -Assembly -Dispensing -Remote TCP. Model: KRC4 KR360 R2830 Condition: Used & Tested Year: 2016 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant PLC MERKEZI Refurbishment Services Include with additional cost: • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. As PLC Merkezi EOOD, we have more than 400 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: good (used), Year of construction: 1987, overall weight: 42,000 kg, total width: 6,000 mm, total length: 7,800 mm, total height: 3,900 mm, sheet thickness (max.): 22 mm, Flanging and dishing machine SCHLEIFSTEIN - KBol 4022 MACH-ID 9659 Make: SCHLEIFSTEIN Type: KBol 4022 Year: 1987 Range off edge radius Manual 20 - 500 Range off edge radius Automatic 150 - 500 Hydraulic Controllable forming roll drive Hydraulic displacement drive Clamping device without hole Max. pressure manipulator 2000 Psi / 140 bar Max. pressure press 5700 Psi / 400 bar Max. speed forming roll 170 M/Min Kunkel head forming rolls: R = 350 Cedpfx Ajzfi Hhoc Doha R = 300 R = 275 R = 250 R = 200 R = 175 R = 150   Basket bottem Knocker bottom Pressure vessel bottom Boiler bottoms Flat floor Plate base diffuser bottom Tank bottom Tank bottom Radar reflectors Engine parts Dispense air Silo hoppers Cooker hoods Container parts Hemispheres Max. workpiece: 4600Ø Maximum sheet thickness:22mm Max. dishing radius: 700mm Min. product Ø: 800 Min. plate thickness: 4mm Min. dishing radius: 35mm Power: 90kW Length: 7800mm Width: 6000mm Height: 3900mm Weight: 42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, High-capacity funicular mounted on a MAN 6x4 chassis truck - Maximum working length, line of 2,000 m - MAN 400 CP truck chassis - 12 m tower equipped with 6 hydraulic anchors - Possibility of mounting the funicular in the lower position (valley) or in the upper position (mountain), in other words, the funicular can pull logs from top to bottom or from bottom to top - Trolleys with 50 m cable reserve (for easy manipulation), verbally activated with remote control station + 2 additional Trolleys Chjdpfx Acjt Nf Ipj Dsa - Various spare parts - The machine is registered in Romania and can be driven on public roads - Good working condition. It was used very little. Purchased from the Austrian Forestry Directorate. Installation in very good working condition. Belwo you can find our offer for VOLVO L180E. For this machine, no professional description is needed, as you can see all the details in the attached photos.

Condition: good (used), Year of construction: 2017, load capacity: 2,000 kg, total height: 1,300 mm, total length: 2,000 mm, total width: 1,300 mm, table width: 1,200 mm, rotary table diameter: 1,200 mm, overall weight: 1,300 kg, table load: 2,000 kg, SWP PTA 2000 Welding Positioner / Manipulator Table Ø: 1200mm Table load on 400 mm:2000 Rotation table: 270° Table rotation: 0,13 - 2,6U/mm Table load:: 2000 Length: 2000mm Width: 1300mm Chsdpfozd T Tpox Ac Dsa Height: 1300mm Weight: 1300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2000, condition: ready for operation (used), overall weight: 1,400 kg, total width: 1,600 mm, total height: 1,650 mm, laser power: 8,000 W, product length (max.): 1,300 mm, number of axes: 3, This 3-axis WAFIOS Fmu1 CNC wire coiling and bending machine was manufactured in 2000. It features an integrated CNC control panel with a full physical QWERTY keyboard and a secondary overhead display monitor. The machine includes a circular multi-tooling slide configuration and an integrated wire straightener feed mechanism. If you are looking to get high-quality bending capabilities, consider the WAFIOS Fmu1 machine we have for sale. Contact us for further details. Chjdjzf Ipzjpfx Ac Dsa - Phase/Connection: 3 ~- Voltage: 400 V- Frequency: 50 Hz- Control Voltage: 24 V DC / 230 V AC- Fuse Protection (Amps): 35 A (Main) / 25 A- Control Interface: Integrated CNC control panel with full physical QWERTY keyboard, function keys, and secondary overhead display monitor.- Included/Attached Components: Circular multi-tooling slide configuration, integrated wire straightener feed mechanism, workpiece transfer/manipulator station, protective hood enclosure (blue), inspection magnifying lamp, status tower light (Red/Green)- Application: Production of springs and bent parts- Operation: Automatic CNC programmable command (7 to 12 axes)- Wire Diameter Range: 0.4 - 1.6 mm- Wire Feed Length: Freely programmable, unlimited- Feed Speed: Max. 100 m/min- Rotation Length: Max. 68 mm- Coiling-Bending Unit Stroke: Max. 80 mm- Programming Precision (Feed C-axis): 0.001 mm- Programming Precision (Wire Rotation A-axis): 0.005°- Programming Precision (Coiling Head Y-axis rotation): 0.01°- Programming Precision (Coiling Head Z-axis longitudinal): 0.001 mm- Programming Precision (CNC Slides): 0.005 mm- Programming Precision (Raised CNC Spinner): 0.05°- Working Height: 1200 mm (wire center)- Production Rate: Max. 150 pcs/min- Installed Power: 8 kW- Air Consumption: Approx. 1 - 8 l/min at approx. 6 bar (depending on accessories)- Noise Level: Approx. 70 dB/A- Nominal Operating Voltage Tolerance: -10% / +6%- Operating Ambient Temperature: +10°C to +50°C- Transport and Storage Temperature: -10°C to +50°C- Operating Humidity: Max. 70% relative humidity at 25°C (Spraying not allowed)- Storage/Transport Humidity: Max. 90% relative humidity- Height with Open Hood: 2500 mm

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches Csdpfx Acjzf Nk Ts Doha • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: used, Year of construction: 2008, Motor spindle turning machine: Tornos Type/Model: MultiAlpha 8x20 Condition: used Year of manufacture: 2008 Machine hours: 45017 h Technical data Capacities & travels Bar diameter (round material): up to max. 22 mm (with turned bars up to max. 25 mm) Workpiece length: max. 100 mm Longitudinal travel (Z-axis): 80 mm Cross slide travel (X-axis): 50 mm End units (longitudinal slide): 200 mm Spindle & axes Main spindle: 8 independently driven motor spindles Counter spindles: one counter spindle, with max. 5 machining tools and max. 3 driven machining operations possible Total axes: 34 axes Tool slide: 7 cross slides X/Y (position 1 - 7); 1 facing slide X (position 8); 7 longitudinal slides (position 1-7) Drive power & speeds Speed of main spindles: 0 - 8,000 rpm Power of main spindle motor: 11.2 kW Torque of main spindle: 17 Nm (optional up to 25 Nm) Speed of counter spindle: max. 8,000 rpm Power of counter spindle motor: 3.7 kW Torque of counter spindle: 8.3 Nm Equipment / accessories: Fanuc 30i control system 4x Motoquill 8x Fixed drilling spindle with Modular 40 mount Base holder Göltenbodt (fixed to axes) Knoll system with turbo filter system Manipulator for part handling max. bar diameter Ø 20 mm max. part length 100 mm 1 x Y-axis installable Csdpfx Acszgwp Hs Deha

Condition: used, Year of construction: 1980, pressure . t total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m An entire forging plant in Germany is for sale. Includes: Banning forging hammers (10–50 hundredweight); Dango and Dienenthal HSM 12 manipulators; Merz bogie-hearth furnace, hood-type furnace, etc.; wedge- ram spare parts, etc.; mechanical workshop; oil storage facility. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Chsdjzfwt Ajpfx Ac Dsa About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Drive . kW Capacity . kg/h material . 6 pieces originally for manipulator AMP1000 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Chodpfx Acjzdu Tqj Dja

Condition: used, Drive . kW Capacity . kg/h material . 4 pieces For Manipulator AMP1000 Cedezdu Sgspfx Ac Doha The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Drive . kW Capacity . kg/h material . 8 pieces For manipulator A5.1 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Chodpfx Acsyqvm Tj Doa About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, load capacity: 180 kg, arm reach: 2,900 mm, Model: KR210 (L180)-2 2000 Payload: 210kg or 180kg Arm Reach: 2700 mm or 2900 mm Condition: Used & Tested & Painted Year: 2008 (Multiple Options Available) Codpfoq Hfahox Ac Djha Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, load capacity: 200 kg, arm reach: 2,400 mm, controller manufacturer: KUKA, controller model: KRC2 ed05, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Csdpfxjw Hyhno Ac Dsha Model: KR200 COMP Payload: 200 kg Reach in mm : 2400 mm Condition: Used & Tested Year: 2005 (Multiple options available) Included: Manipulator + KRC2 ed05 Cabinet + Teachpendant + All Wire Sets + 6 months of warranty PLC MERKEZI Refurbishment Services Include: • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs. (Source: Kuka's Website)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, load capacity: 300 kg, arm reach: 2,500 mm, controller manufacturer: KUKA, controller model: KRC4, As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing Chodpfxsw Hrn Hj Ac Dea - Apgant Machine Feeding and Metal Bending - And many other projects Brand: KUKA Model: KR 300 KRC4 R2500 ULTRA Year: 2014 Control Cabin: KRC4 Rated Payload: 300kg Access Distance: 2500mm Contents: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant + Shipping: NOT included in the price Payment: 100% payment prior to collection Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, load capacity: 360 kg, arm reach: 3,076 mm, Model: KR360 (L280) Payload: 280kg or 360kg Chsdpfx Ajq Hd Hrsc Dja Arm Reach: 3076 mm or 2826 mm Condition: Refurbished with 6 months of warranty Manipulator: Year 2004 Controller Cabinet: KRC2 ed05 Year 2007 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant + 1 year warranty As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs.