Used Emag Vl5 Ersatzteilträger for sale (929)

Condition: used, Electric chain hoist, DEMAG Type DKM 1-80 K V2 F4 Manulift Manufacturer's No. 63904165, Year of manufacture 1998 Load capacity 80 kg Hook travel 2.8 meters Lifting speed 14 m/min Fine lifting speed 3.5 m/min Motor power 0.34 / 0.09 kW Mains connection 400 Volt, 50 Hz 1 load chain = 80 kg Manulift hand control directly on the crane hook Weight 18 kg Itsdszd Hi Ropfx Anweh Good condition

Condition: used, Electric chain hoist crane DEMAG, type DKM 1-80 K V2 F4 Manulift Manufacturer's serial number: 63158144, Year of manufacture: 2000 Load capacity: 80 kg Hook travel: 3 meters Lifting speed: 14 m/min. Fine lifting speed: 3.5 m/min. Motor power: 0.34 / 0.09 kW Power supply: 400 volts, 50 Hz 1 load strand = 80 kg Manulift hand control directly on the crane hook Weight: 18 kg Good condition Iodpezd Hi Dofx Anweth

Condition: like new (used), functionality: fully functional, Year of construction: 2025, The system was manufactured for a customer project but was not put into operation due to a subsequent change in the installation requirements. The conveyor belt is in new condition and is immediately available. This provides the opportunity to purchase the system at a significantly lower price than the new price. Aluminum angle conveyor with substructure, including adjustable feet and machine feet for leveling uneven surfaces. Horizontal section: 750mm Rising section: 2,300mm Inclination angle at the bend: 60° Height of the horizontal section: 250mm Conveyor belt length measured on the floor: 1,900mm Discharge height: 2,200mm Design: Aluminum construction - 2x profile reinforced 90x45mm - Full-surface wear plate, 2.0mm, galvanized Drive roller + deflection roller, S235 steel, welded and machined Ø100x520mm, crowned, shaft fixed with tension bearings Drive: Gearmotor, 0.55KW, speed 0.53m/sec Connection 230/400V, 50Hz, protection class IP54 Drive ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Conveyor belt width: 500mm 2 pieces of wave edges, 50mm high, 25mm wide, high-frequency welded Iedpozfi A Aofx Anwjth 21 pieces of T-40 studs, 300mm long, approx. 300mm spacing Belt material: 2-layer, particularly dimensionally stable in the transverse direction In the bend area, the belt is guided on both sides with 2 pressure rollers each. The belt is designed with a border-free zone of 70mm on both sides. Due to the wave edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 300mm, as follows: (Top view) Transverse arrangement: 70+25+5+300+5+25+70mm Belt guidance via PVC wedge strip on the running surface, profile - 10x6mm - Including recess in the wear plate - Including sliding joints in the drive and deflection roller Inspection possible after consultation Price is net, plus 19% VAT.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 7143-1001, clamping force: 500 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 1,995 bar, injection weight: 94 g, opening stroke: 400 mm, installation height: 210 mm, total length: 4,000 mm, total width: 1,400 mm, total height: 2,100 mm, overall weight: 3,400 kg, pump power: 15 W, Please refer to the photos and video for the condition and contents of the offer. The equipment is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Itodex Spw Aepfx Anweh Subject to prior sale. Visit our website to view our additional offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 80400008, clamping force: 2,800 kN, screw diameter: 45 mm, injection weight: 320 g, ejector stroke: 200 mm, opening stroke: 675 mm, Loading the machine is possible for an additional charge of €500! TECHNICAL DETAILS Clamping force: 2,800 kN Number of components: 1 Width of clamping plate: 950 mm Height of clamping plate: 950 mm Free distance between bars, horizontal: 630 mm Free distance between bars, vertical: 630 mm Diameter of centering ring: 160 mm Minimum installation height: 330 mm Maximum installation height: 710 mm Maximum opening stroke: 675 mm Maximum ejector stroke: 200 mm Maximum tool weight: 3,700 kg Maximum tool weight, moving side: 2,500 kg MACHINE DETAILS Thread: M20 Screw diameter: EE1: 45 mm Maximum shot weight PS: EE1: 320 g Unit arrangement: EE1: horizontal Isdpszdiyxofx Anweth EQUIPMENT Core pull, 2-fold Cascade, 6-fold Robot Note: The operating hours can be found in the last image.

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Ijdpfx Ajymqz Renweth

Condition: like new (used), Ident No. 87481044 SED2Z Application: Keyboard Width: 86 mm Height: 67 mm Itodjzc H Hnspfx Anwoh Depth: 63 mm Weight: 252 g Condition: Like new

Condition: used, Column-Mounted Crane DEMAG type PK1 N-F Itjdpjzdf Aqsfx Anwsh Capacity: 125 kg Arm travel: 3500 mm Height under hook: 2200 mm Total column height: 3150 mm Height under arm: 2700 mm With electric hoist Chain exit: length 2100 mm In good condition Voltage: 380 V Weight: approx 250 kg

Condition: good (used), Year of construction: 1979, Overhead Crane DEMAG Type: EKKE Year 1979 Lifting capacity 7500Kg. span width : 7500mm Hook height : 5500mm Iodpfxoh Uqbfj Anweth Complete with traction motors and hoisting gear from DEMAG Crane documentation and test book reports, plans available with 20 meter power rail included.

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: WIL9, Demag hall crane, portal crane, bridge crane including steel structure with floor control Dimensions of steel structure approx. 36 x 14.5 m with 1x Demag bridge crane 2.5 tons - gauge 14.3 m Payload/lifting capacity 2500 KG - 2.5 t Technical data of the system: Itodpfezdcd Ssx Anwsh Crane track/steel structure consisting of HEB200/HEA240 beams Length of steel structure approx. 35.75 m Overall width (outer edge of steel structure) approx. 14.5 m Overall height of crane approx. 6.2 m Top of running rails approx. 5.41 m Bottom of running rails approx. 5.17 m Top of bridge approx. 6.2 m Bottom of bridge approx. 5.68 m Hook height approx. 5.2 m Gauge 14.3 m Support spacing approx.: 6.1 + 6.1 + 6.1 + 6.1 + 6.1 + 5.5 m System is delivered complete: Steel structure / supports made of HEA240, running rails HEA280 incl. power rail/power supply 1 bridge with 2500 kg Demag DH wire rope hoist with floor control Crane is disassembled and immediately available The location of the item is 75053 Gondelsheim Very good condition, see pictures Shipping by forwarding agent or collection only by appointment

Condition: used, Year of construction: 1985, machine/vehicle number: KA, Demag Indoor Crane Gantry Crane Overhead Crane incl. Steel Structure + Floor Control Steel structure approx. 10x3.5 m with Demag KBK I crane track and one bridge Load capacity/lifting capacity 1x 125kg, incl. 1x 80kg Demag PK Manulift chain hoist Technical data of the system: Crane track/steel construction consisting of HEB100 beams Length outer edge steel structure approx. 9.5m Total width outer edge (steel structure) 3.45m Inner edge steel structure 3.3m Total height steel structure/crane 3m Column height approx. 3m with base plate Underside of runway rail 2.7m Top side of bridge 3.95m Underside of bridge 2.45m Hook height 1.75m (Manulift) Track gauge approx. 3m Rail length approx. 10m Distance between columns: see sketch (4.75m + 4.75m) System is delivered complete: Steel structure complete with columns Demag KBK 1 system incl. chain hoist Itsdow Hniyjpfx Anweh Crane is dismantled and immediately available Location is 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or collection only by appointment

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: 82944644, Demag DH1000 cable pulley for bottom block 2/1 or 4/1 Version. Cable diameter 20 mm Sheave diameter 450 mm Bearings 6018ZX Demag number 82944644 Iedpfxov Iq Ags Anweth Price is per piece! ( Demag new price € 3175.- ) Condition New 2 pieces in stock.

Condition: used, functionality: fully functional, P1000 / P1200 H-20 Outercasing & ropebarrel 4/1 Rope diameter 20 mm Inclusive 4/1 traverse Itjdpfx Aewd Iyaonwjh In exellent condition !

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: 34167233, Demag load hook including hook traverse Hook number 10 4/1 version DH1025 - DH1032 - DH1040 - DH1050 - DH1063 Demag number: 34167233 or 34167299 Condition: New Dequtec price € 2750.-! (Demag new price € 4500.-) Itjdpfx Anev I T H Ujwjh

Condition: reconditioned (used), functionality: fully functional, FG20 i = 10 13/6 P-4 engine (P200) FG24 I = 85 13/4 L-4 engine (P20, P23, P30, P35) FG24 i = 10 16/5 P-4 engine (P400, P600) FG28 i = 10 16/7 P-4 engine (P600, P1000) Itjdpfxozcnnye Anwoh FG28 i = 10 16/8 K-4P engine (P1000, P1200) FG36 i = 10 19/11 K-6P engine (P1600, P2000) FG04 / FG06 / FG08 Demag DH300, DH500, DH1000 Series

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: NOH388/45 - NOH384-34, 1 Vetter / Demag wall-mounted swivel crane, 250 kg payload / lifting capacity Type AW2.5-7.0 Reach approx. 7m, 250 kg / 0.25 t payload with Demag DC chain hoist, 250 kg payload (2 lifting speeds) Crane available in quantity 2!!! Itodpfxoxmd Rde Anwoh Total weight approx. 450 kg Year of manufacture 2004, with inspection certificate Complete with wall brackets, jib, chain hoist, cable carrier, undercarriage and small parts Swivel range approx. 180° Item location: 75053 Gondelsheim System is completely disassembled and immediately available See pictures Shipping by freight forwarder or collection Please inquire about shipping costs based on your postal code.

Condition: ready for operation (used), DEMAG precision gearbox FG36 2 units available Price: €6,800/unit Itedpszc Ehdefx Anwsh

Year of construction: 2008, condition: excellent (used), Demag Ergotic – Valve Itjdpfezfq Itsx Anwjh Year of manufacture: 2008 Serial no. 10

Condition: used, Year of construction: 2008, operating hours: 5,281 h, * Type: Demag DF 65P * Year of manufacture: 2008 * Power: 52 kW Itsdoy Hblhjpfx Anwoh -----Internal vehicle number: 10326----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp – German, English – WhatsApp – German, English, Arabic

Condition: good (used), Hoisting motor with chain hoist and control panel. Load capacity: 1/1 125 kg 8 m/min. 2/1 250 kg 4 m/min. Depth: 300 mm Height: 400 mm Width: 500 mm Weight: approx. 22 kg (net) Condition: good, second-hand Itsdpfxjzcm R To Anwoh

Condition: used, power capacity / kW volt / V Isdpfxszcq Nte Anwoth ampere / A DEMAG S040-B5-11-2

Condition: used, power capacity / kW volt / V Itsdpfxjzcq I Ne Anweh ampere / A

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Wittmann | W621 | 2003 Temperature control: HB Therm | HB-100 Z1 | 2013 Miscellaneous: 1x Protective Enclosure 1x Conveyor belt 1x Hot Runner Controller, Mold Masters 1x Conveyor unit, Motan Technical Details: Power supply: 3x400 V Frequency (Hz): 50 Current 1 (A): 189 Current 2 (A): 152 Current 3 (A): 37 Weight (t): 10.1 Pressure (bar): 190 Flow rate (l/min): 206 Iedpfx Aey N R Iqenwsth

Condition: used, Year of construction: 2014, (1) Injection molding machine, Handling: Sepro Robotique | Success 22 | 2016 Temperature control: GWK Miscellaneous: 1x Protective Enclosure 1x Conveyor Belt, 1x Conveyor Unit, manufacturer Somos FG 204; year of manufacture 2022 Technical details: Clamping force (kN): 2100 Tie bar distance (mm): 580 Injection unit: 430 Power supply: 3/400 V Frequency (Hz): 50 Current 1 (A): 175 Current 2 (A): 116 Current 3 (A): 59 Weight (t): 8.93 Pressure (bar): 190 Isdoy N R R Eepfx Anwoth

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Sepro Robotique | Success 7 | 2016 Iedpfx Anoy N R U Rewsth Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Conveyor Belt, company RAU Maschinenbau 1x Hot Runner Controller 1x Conveyor Belt, company SAS Grillet 1x Conveyor Unit, company Motan Technical Details: Machine size: 500/370-200 Power supply: 3/N/PE AC 400 V Frequency (Hz): 50 Current (A): 94 Weight (t): 3.3 Pressure (bar): 210 Flow rate (l/min): 130