Used Ewm Tetrix 230 Comfort 5P Tm for sale (12,727)

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Total press force: 16,000 kN Force application point before the PMI: 18 mm Number of strokes adjustable continuously in automatic mode: 10 - 22 1/min Lsdpfszldwusx Am Uerp Slide stroke: 605 mm Slide adjustment: 400 mm Mold height (stroke downwards, adjustment upwards): 1300 mm Table dimensions: 4500 × 2300 mm Slide dimensions: 4500 × 2300 mm Table height from the ground: 600 mm Table stroke: T-Track Transfer stroke: 0 - 1200 mm Internal clearance of the guide shoulder for the clamping pins (min.): 800 mm Internal clearance of the guide shoulder for the clamping pins (max.): 2400 mm Lifting stroke: 0 - 280 mm Cushions in the base (hydraulic): 2 pcs. Positioning of both cushions: Motorized and adjustable Cushion force: 300 - 2000 kN Cushion stroke: 0 - 250 mm Cushion surface area: 1600 × 950 mm Pneumatic cushion in the slide: 2 pcs. Cushion force in the slide: 55 - 550 kN Maximum cushion stroke in the slide: 150 mm Left slide cushion surface area: 1450 × 1600 mm Right slide cushion surface area: 1300 × 1600 mm Maximum weight of the upper part of the mold: 36,000 kg Maximum total weight of the mold: 40,000 kg Technical data for the CISAM line: • Strip width: 300 - 1600 mm • Strip thickness: 0.5 - 3.0 mm • Tensile strength: 600 MPa • Yield strength: 400 MPa • Feed rate: 200 - 1300 mm • Feed accuracy: ±0.1 mm • Maximum feed cross-section: 4,000 mm² • Strip entry height above the table: 500 - 800 mm • Maximum coil weight: 25,000 kg • Coil outer diameter: 900 - 1,855 mm • Mandrel expansion range: 500 - 610 mm • Nominal coil inner diameter: 610 mm • Straightening rollers: 9 pcs. • Straightening unit with cassette construction

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 660 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Telescopic forklift, rigid frame Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Technical condition: good Front tire type: Pneumatic Front tire condition: 80 - 100% Rear tire type: Pneumatic Lodpfx Ajzkwvcem Ujrp Rear tire condition: 80 - 100% 3rd valve, full cabin

Condition: used, Cast iron control/tracing marble Length: 1700 mm Lrsdpfx Amjzk Dcze Usp Width: 700 mm Thickness: 230 mm Height on feet: 940 mm Weight: 0,8 T

Condition: excellent (used), Mettler Toledo Model: TGA/DSC 3+ Mettler Toledo TGA/DSC 3+ HT Thermoanalysis System + GC401 + XP5U + Huber Ministat – incl. STAR Software & Dongle For sale is a complete, fully operational thermoanalysis system from Mettler Toledo in high-temperature configuration (up to approx. 1600 °C), including software license (STARᵉ) with hardware lock (dongle). System configuration: - TGA/DSC 3+ (combined thermogravimetry + DSC) - High-temperature furnace (HT, up to approx. 1600 °C) - Sensor: FRS2 SDTA Ledpfeyxcqvox Am Ujrp - Gas controller: GC 401 - Microbalance: XP5U - Temperature control system: Huber Ministat 230-MT (Pilot ONE) - Software: STARᵉ Software Version 16.00b - License: Hardware lock (USB dongle, green) Software & license: Included in delivery: - STARᵉ Software (Version 16.00b) - Original hardware lock (USB dongle) Functions: - Thermogravimetry (TGA) – Mass change (µg range) - DSC / SDTA – Heat flow measurement (mW range) - Temperature analyses up to high-temperature range - Measurements under defined gas atmosphere Technical data (excerpt): - Temperature range: RT up to approx. 1600 °C - Heating rate: typically 10 K/min - Gas flow: Air: 30 ml/min Nitrogen: 20 ml/min - Temperature accuracy: Indium: ±1.5 °C Aluminum: ±2.5 °C Gold: ±3.0 °C Palladium: ±4.0 °C - Weighing accuracy: 1 g: ±50 µg 5 g: ±250 µg Temperature control unit Huber Ministat 230-MT: - Temperature range: -40 °C to +200 °C - Voltage: 230 V - Power consumption: max. 11 A Dimensions & weight: - Total weight: approx. 100–150 kg - Multi-component system (laboratory equipment) Scope of delivery: - Complete TGA/DSC system - High-temperature furnace - GC 401 gas controller - XP5U balance - Huber Ministat 230-MT - STARᵉ Software incl. USB dongle - Documentation and accessories as shown in the photos Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors!) For further inquiries, please feel free to contact us by phone.

Year of construction: 2022, condition: good (used), Machine is in good working condition. Still in production. Lredpfx Ajzlaqdsm Uop Parts shown by hand not come.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CDT50 in the trailer version covers a pressure range from 230 to 2000 bar with a flow rate of 11 to 80 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. To ensure durability and corrosion resistance, the frame inside the trailer is made of hot-dip galvanized steel. In addition, the frame is primed and then painted, which creates a very appealing appearance. The frame can be easily pulled out for maintenance. The CD50 in the trailer version can be configured with numerous options, such as a hot water boiler, an electrically powered hose reel, a remote control, etc. However, it is similar to but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CDT50-230 230 bar 80 Lpm CDT50-400 400 bar 40 Lpm CDT50-500 500 bar 33 Lpm CDT50-700 700 bar 25 Lpm Ledjhgbkfspfx Am Uerp CDT50-1000 1000 bar 20 Lpm CDT50-1250 1250 bar 15 Lpm CDT50-1380 1380 bar 13 Lpm CDT50-2000 2000 bar 11 Lpm General specifications: ----- Max. pump speed: 1160 rpm Drive engine: Toyota Diesel 4 Cyl. Water-cooled Drive engine power: 37.3 kW Drive engine speed: 1900 rpm Tank: 90 L Max. fuel consumption: 11.0 L/h Noise level (1m): 89 dBa Dimensions and weight: 3050mm x 1700mm x 1900 mm (2000 kg)

Condition: new, functionality: fully functional, empty load weight: 126 kg, maximum load weight: 624 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,300 mm, loading space width: 1,260 mm, loading space height: 300 mm, total length: 3,210 mm, total width: 1,690 mm, total height: 800 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz Basic 230 Lrsdpfx Amozk E Rms Uop NEW VEHICLE Internal dimensions: 230cm x 126cm Total weight: 750 kg Payload: 624 kg Side board height: 30cm Unbraked single-axle low-loader Side boards made of galvanized sheet steel Rear side board can be folded down and removed Bolted and galvanized steel frame Screen-printed plywood floor 13-pole electrical system Rear lights with reversing light and triangular reflector Plastic mudguards Support wheel 13-inch M+S tires Vehicle can be placed on the rear panel for storage Optional accessories: - 100 km/h upgrade - Rear supports - Grid structure - Extension side boards 40cm - Aluminum cover with bracket for e.g. bicycle carrier - Flat cover with or without bow - High cover 80cm or 110cm - Mesh, coarse or fine - Spare wheel with bracket - Loading ramps Further accessories on request! Pictures are for illustrative purposes only and may show optional accessories that are subject to an additional charge. Plus registration certificate and freight to Gera 120 € net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pick-up. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all kinds of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come directly to our location.

Condition: used, mileage: 138,000 km, power: 120 kW (163.15 HP), first registration: 05/2022, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 09/2027, color: red, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,345 mm, loading space width: 1,780 mm, loading space height: 1,810 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Please call us at WhatsUp/Viber also) E-mail: Lrsdpfxjzmb Uyj Am Uep Main equipments includes: Bluetooth, Multimedia system,Multifunction steering wheel, electric mirrors and windows etc.

Condition: excellent (used), Year of construction: 2007, Battenfeld TM 100/525 Year of manufacture: 2007 injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Injection pressure: 2100 bar Metering volume: 251 ccm Clamping unit: clamping force: 100 t tie bar distance: 420x420 mm size of clamping platens: 640x640 mm ejector: hydraulic clamping unit: toggle lever Control system: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear resistant and resistant to corrosion Central lubrication Automatic mold height adjustment Dimensions: Weight: 3900 kg Length/width/height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating power: 12,1 kW Total power: 30.6 kW All offered machines are started by our service technicians before sale. Lrjdpfx Amszc Nu Ie Ujp It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 6AV2 124-0QC13-0AX0, input voltage: 24 V, type of input current: DC, TP1500 Comfort Outdoor Lrsdpfxezicqbe Am Usp HMI panel 6AV2 124-0QC13-0AX0 C-K3KJ7468 AC-64-17-01-2E-3C ATEX, Zone 2 1280 x 800 pixels Crack in the screen, but all functions still work perfectly; see video.

Condition: good (used), Year of construction: 2005, Description: The machine is in good technical condition, and can be tested upon prior arrangement. It features a Haas CNC control system, often a 32-bit version for this model year. Travel distances for X/Y/Z axes are 1016 × 406 × 406 mm, or 40" × 16" × 16" in inches. Table dimensions are 1467 × 267 mm / 57.75" × 10.5". Spindle taper is CAT/CT 40 or BT 40. Spindle speed ranges from 0–4000 rpm. Spindle power is 5.6 kW / 7.5 HP. The spindle drive is belt-driven. Maximum torque is approximately 45 Nm at 1200 rpm. Distance from the spindle nose to the table is 102–508 mm / 4"–20". Rapid traverse rates for X/Y/Z axes are 5.1 m/min / 200 ipm. Maximum cutting feed rate is 5.1 m/min. There are 3 T-slots, each approximately 16 mm wide. Lsdpfxjzlhtyo Am Uorp

Year of construction: 2023, condition: new, MORI-SAY TM 620 CNC lathe with digital slides and its new Cucchi-BLT bar feeder Machining of medium and large series max Ø 20 mm (Ø 24 mm) Lrjdpekvl Eyjfx Am Ujp Interchangeable MORI-SAY 6/20 AC equipment Double Fanuc control with touch screen Up to 34 numerically controlled axes

Condition: like new (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 16P1269203, type of input current: three-phase, operating pressure: 7 bar, pump capacity: 7 l/min, power: 0.06 kW (0.08 HP), Equipment: documentation/manual, MODE OF OPERATION The system is suitable for the proportioning (metering) and mixing of two- or multi-component products. An electronic control system monitors and regulates the specified mixing ratio. The base paint flows continuously, and the control system mixes the necessary amount of hardener (in timed intervals) via a valve. The flow rate of the base paint and hardener is measured with flow meter cells. With plunger pumps, stroke sensors can also be used. The components and cleaning agents are supplied by feed pumps. Color Selection The mixing ratios, pot life, etc., are stored in recipes. The color can be changed by simply switching recipes. Further Features and Applications: Lrsdpjzb I Spsfx Am Uop For low to medium pressure (32.5 MPa; 325 bar; 4714 psi). 2K COMFORT XL for high pressure (53 MPa; 530 bar; 7687 psi). Modular design – can be configured according to customer requirements. Electronic accuracy in metering ensures consistent quality. Processing of water-based 2K materials is also possible, as all material-contacting parts are suitable for this purpose – for example, made of stainless steel. The fluid component of the Ex version is suitable for use in potentially explosive areas (Zone 1 and 2). Many displays of the functions are language-independent and use simple symbols. Text is displayed in the selected language. Consumption overview for each component and for cleaning agents, VOC documentation. Storage of the last 700 error messages with date and time. Safety through continuous monitoring of system parameters, informing the operator when even the smallest malfunctions occur and, if necessary, automatically interrupting production. Protection of parameters by security code. Settings can be saved on a USB stick. Electronic adjustment of the mixing ratio between 0.1:1 and 50:1. Up to 100 work recipes. (Also with robot communication or Profibus.) Possibility of two separate fluid circuits: – for simultaneous operation, – for quick color changes, – or to separate two incompatible 2K materials from each other (e.g., PUR and epoxy paints). Programmable cleaning recipes to save up to 60% of cleaning agents compared to conventional systems. Fully automatic control and monitoring for 1–4 guns. Compatibility with solvent-based and water-based products, as well as selective automatic cleaning with water and/or solvents. Use of manual or automatic atomizers. Release of automatic spray booth, automatic gun cleaning device, etc. Possibility of robot communication.

Condition: used, Year of construction: 2011, operating hours: 10,747 h, Equipment: ABS, ATLAS 230 MH Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2011 ? BETRIEBSSTD. 10 747 Std Lrsdpeycbbyefx Am Uop TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: used, mileage: 144,000 km, power: 99 kW (134.60 HP), first registration: 03/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,548 mm, total width: 2,070 mm, total height: 2,499 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, For sale is a well-maintained Nissan NV-400 van with the globally popular 2.3-liter diesel engine. * The vehicle is in good condition! * German vehicle * Regularly maintained * 1st owner * VAT can be shown separately Lrodpfozikbbjx Am Uop * Euro 6d Temp Equipment: Van L2-H2 * Air conditioning * Passenger airbag * Increased trailer load * Comfort package * Rear parking sensors * Rear doors with a 270-degree opening angle * Electric exterior mirrors * Central locking * 3 seats * Truck registration * and more... Technical data: Permissible total weight: 3500 KG * Unladen weight: 2049 KG * Payload: 1451 KG * Trailer load: 2500 KG Why are we the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transfer license plates (5-day/customs registration) usually on the same day * Airport or train station pick-up service All vehicles are professionally prepared and hygienically cleaned! The highlights: Disinfection of the interior and ventilation system using ozone cleaning. Two-stage polishing on the exterior. * If necessary, paint correction and smart repair. All our vehicles have also undergone a thorough service. Of course, this includes new fluids, filters and other expenses that you shouldn't have to worry about. Optionally, we can present the vehicle to an independent inspection center or workshop of your choice. We are pleased to have aroused your interest and are available to you around the clock. If you have any questions, comments or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found on Special equipment: Cool & Sound package, rear wing doors without glazing (opening angle 270 degrees) Additional equipment: Storage compartment with footwell lighting, storage compartment in the roof, airbag driver side, audio controls on the steering wheel, audio system: radio with CD player with Bluetooth, exterior mirrors electrically adjustable and heated, on-board computer, glasses holder integrated into the headliner, design and equipment line COMFORT, rev counter, parking assistance system rear, electronic brake force distribution (EBD), driving assistance package plus, driving assistance system: side wind assist, body/structure: high-roof standard van, fuel tank: 105 liters, load compartment bulkhead, steering column (steering wheel) height adjustable, engine 2.3 liters - 99 kW dCi diesel catalytic converter, rear fog lamp, wheelbase 3682 mm, spare wheel with road tires, low emissions according to exhaust standard Euro 6d-TEMP, gear shift indicator, sliding door load/passenger compartment right, mud flaps front, side airbags front, seats in the driver's cab: passenger double seat, 12V socket in the load/passenger compartment, blind spot mirror in the sun visor, heat-insulating glazing with UV protection

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling Ledpfx Amozikhbe Uorp First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: used, Year of construction: 2013, functionality: limited functionality, operating hours: 8,406 h, cutting height (max.): 230 mm, cutting width (max.): 245 mm, total height: 1,680 mm, total width: 1,950 mm, overall weight: 1,000 kg, Y-axis feed length: 500mm Saw blade length: 2950mm Saw blade width: 27mm Maximum cutting length: 9999mm Space requirement (height): 2100mm Space requirement (width): 1950mm Table length: 2800mm Ljdpozkufmefx Am Ujrp Table width: 245mm Working height: 890mm Further technical details can be found in the operating and maintenance manual, which will be provided with the purchase. If you have any further questions, please do not hesitate to contact us by email or telephone. Sincerely, Weber Railing Systems

Condition: new, 1 brand new horizontal bandsaw machine with a swiveling frame and double miter capability (R/L) Manufacturer: HUVEMA / BEKA-MAK, Origin Turkey Model: HU 230 DG-4 Cutting range: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 760 mm Motor power, main drive 1.0 - 1.3 kW, 400 V, 50 Hz Motor power, coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Double miter capability through a swiveling frame o The material to be cut remains straight in space! o No need to turn the material for miter cuts! o High efficiency with enormous time savings! Ledpfxefk Ew Ee Am Uorp • Adjustable precision stops 0°, 45° and 60° on the left and 45° on the right • Interchangeable work table • Quick-release vise, can be shifted to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is regulated steplessly by a hydraulic cycle • Coolant system • Chip brush • Swiveling control panel • Electric safety switch for blade tension and saw blade guard • Automatic shutdown at the end of the cut • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: good (used), Year of construction: 2007, functionality: fully functional, Haas TM 1 HE vertical milling machine, Lodpfxjzh Unpj Am Usrp year of manufacture 2007, Haas CNC control, travel in X/Y/Z 762/305/534 mm, table size 1213 x 267 mm, spindle speed up to 4,000 rpm, spindle taper BT 40.

Condition: used, turning diameter over bed 460 mm turning diameter over slide rest 260 mm turning length 1500 mm turning diameter in the gap 600 mm turning speeds 22 - 1500 U/min centre height 230 mm total power requirement 6,5 KW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,8 x 1,2 x 1,5 m Centre lathe - Forkardt F200 3-jaw chuck - Multifix quick-change tool post - Steady rest - Chip tray Lredpfxezhn Uvo Am Uep - Tailstock centre

Condition: good (used), Telecentric lighting, LED lighting, telecentric lens, measuring lens, industrial camera -Manufacturer: Basler, Operator Panel from printing machine OMSO Novadisc 4 3S UV -Type: TM-6CN -Lens: Schneider XNP 1.9/35-0501 -Dimensions: 600/80/H100 mm -Weight: 2.5 kg Lrodpfxowz Ians Am Ujp

Condition: used, 5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block Lsdpect H Trjfx Am Usrp -Manufacturer: Bosch -Type: 0 820 230 001 -Quantity: 1x valve available -Weight: 0.15kg

Condition: used, Sensor actuator distributor, distributor strip, interface, sensor actuator distributor, sensor actuator -Manufacturer: Weidmuller, sensor-actuator-distributor ovp -Type: SAI-8-M 5P M12 170125 -Dimensions box: 175/65/H50 mm Lodehz Utyopfx Am Usrp -Weight: 0.3 kg

Condition: good (used), Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool -Quantity: 2x spindle tools -Recording: SK50 Ljdpfx Aeb A Hvpsm Ujrp -Spindle dimensions: 145-230/225-310 mm Price: complete -Weight: 14 kg/piece

Condition: good (used), Bead mill, agitator mill, shredder, crusher, grinder Lrjdpfx Amsiqu R Dj Ujp -Spare parts: 1x bead mill sieve, 1x bead mill screw, 1x bead mill wheel (see pictures) -Dimensions: 500/500/H165mm, 480/480/H175mm, 370/370/H70mm -Weight: 74 kg net complete