Used Festo Dncke-40-2380-Ppv-A-S for sale (100,917)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: Klsdpfx Amjw U Dt Ns Njr The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Weishaupt RGMS 40 dual fuel burner gas+heavy oil. 2600w Kjdpfomnqbtjx Am Njlr

Condition: used, Make: Leomotor A/SType: KC 218B159 - LM 2000 - 12630 Kljdpfx Aedc A Rnjm Njr

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, linear axis, toothed belt axis Kledpfx Aoud Urrom Njr -Manufacturer: Festo, Linear actuator type DGE-25-1500-ZR-LK-RH-KF-GK -Stroke length: 1500 mm -Servo motor: Festo type EMMS-AS-55-M-LS-TM -Planetary gearbox: Neugart PLE 80 -Quantity: 5 pieces available Price: per piece -Dimensions: 1880/70/H340 mm -Weight: 12.7 kg/pc.

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGSL-12-80-PA 543966 Ksdpfxex Iftls Am Nolr -Stroke: 80 mm -Quantity: 1x sled available -Dimensions: 200/60/H35 mm -Weight: 1.1 kg

Condition: good (used), Storage module, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Solenoid valve Klsdpjb A Slpefx Am Nor Price: per piece Quantity: 3 available -Weight: 0.4 kg

Condition: new, Festo EGSK-33-400-10P electric slide 562781, unused in sealed original packaging, 100% functional Klodpfx Aji D U Ncjm Njr

Condition: ready for operation (used), Siemens 1FT6084-8AK71-3AH0 synchronous servo motor SN: YF B124 1238 04 003, encoder IC2048S/R B25, used, good condition, 100% functional, scope of delivery as per photos Kjdpfx Asvl U Easm Nelr

Condition: new, Festo DSL-32-25-270-P-S2-CC swivel linear unit 163100, with 2 shock absorbers YSR-8-8-C / 34571, with 2 proximity switches 150387, unused, 100% functional Kljdpfx Amsi D U I Uj Ner

Condition: ready for operation (used), Festo 556815 / EGC-120-1500-TB-KF-0H-GK-1HL-PN toothed belt axis, SN: 3S7PLVZ1S90 – stroke: 1500 mm, used, in good condition, 100% fully functional, delivery as shown in the photos. Kljdpox Erk Ejfx Am Nsr

Condition: ready for operation (used), Festo 556815 / EGC-120-2000-TB-KF-0H-GK toothed belt axis SN: 3S7PLQX3B9D, used, in good condition, 100% functional, delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Klsdpfx Amox Erlcs Njr

Condition: ready for operation (used), Festo ELGA-TB-RF-70-800-0H+MF / 1371245 toothed belt axis, used, in good condition, 100% functional, delivery as per photos. Ksdpfxox Ernke Am Nslr

Condition: ready for operation (used), Festo 556815 / EGC-120-2000-TB-KF-0H-GK toothed belt axis SN: 3S7PLQX3B8W, used, in good condition, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs regarding packing and shipping! Kljdpfx Ajx Erk Ssm Ner

Condition: ready for operation (used), Festo 556824 / EGC-HD-160-1650-TB-0H-GK toothed belt axis, SN: 3S7PLRPQJ2C, used, in good condition, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Kodjx Erlijpfx Am Nslr

Condition: ready for operation (used), Festo 556815 / EGC-120-1500-TB-KF-0H-GK-1HL-PN toothed belt axis SN: 3S7PLVZ1S8H – stroke: 1500 mm, used, in good condition, 100% functional, scope of delivery as per photos. Klodpfx Amox Erkxs Nor

Condition: ready for operation (used), Festo EGSL-BS-55-250-5P / 562229 linear actuator, serial number: 12081, used, in good condition, 100% functional, delivery as per photos. Kedpfx Aex Erndjm Nolr

Condition: new, A Drive M642-1340-1208-PZ servo motor SN:2002001, unused in opened original packaging, 100% functional, scope of delivery as per photos Kodpfxsi D Ewao Am Nslr

Condition: new, A-Drive Technology M644-1340-1208-06MPZ SN:2003004, unused in opened original packaging, 100% functional, scope of delivery as per photos Klsdoi D Ewdepfx Am Nor

Condition: new, Festo DGSL-12-50-Y3A Mini slide 543979 ,unused in sealed original box, 100% functional, scope of delivery according to photos Kljdji D U Iuepfx Am Ner

Condition: ready for operation (used), Festo Electronic E.FEA-88 , serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos Kjdpfxei D U Ngs Am Nelr

Condition: good (used), functionality: fully functional, Item: AV-12266-AV12270-Vertical21800L Kodpev I Hbxefx Am Nelr Stainless steel Vertical Insulated Jacketed tank, Capacity 21,800 L Exterior dimensions: Dia Ø 2500/2600 mm Total H 6500 mm. Vertical isolated, stainless steel tanks with cooling jacket - 3 pcs. Manhole bottom. AISI 316

Condition: used, functionality: fully functional, Vertical insulated stainless steel tank Exterior dimensions: Dia Ø 2850/3000 mm, total height 5500 mm. Vertical, insulated stainless steel tanks – 2 units. Capacity: 30,000 L 50 mm insulation, completed with aluminium TRP plates. Conical bottom with 3" outlet. Conical top with ventilation. Manhole in lower part of the cylinder. Brand: Gjettermann & Nielsen A/S Kedpfsxp Hihjx Am Nolr Quality: AISI 316 (V4A).

Condition: good (used), Year of construction: 2001, The Fladder 300/GYRO is a machine designed for processing flat surfaces (e.g., sheets, aluminum parts, steel components, or plastics). Main applications: - Deburring (removal of sharp edges), - Cleaning surfaces after laser, plasma, or punching processes, - Edge rounding, Ksdpfx Amsw Uabpe Nelr - Surface preparation for painting/coating, - Removal of rust, scale, and residual oxides. Technical specifications: Model: Fladder 300/GYRO-1300 VAC Working width: 1300 mm Power supply: 3 × 400 V, 50 Hz Current consumption: 63 A Protection class: IP54 Motors: independent drives for working units and conveyor belt Conveyor belt feed speed: adjustable GYRO system: orbital-rotational working heads (uniform deburring and surface finishing) Equipment: conveyor belt with dust extraction (VAC), control panel, emergency STOP button Year of manufacture: 2001 Machine in good technical condition Complete, ready for operation On-site inspection possible

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 20161259/2017, Filling system for all liquids. The system was used to fill disinfectant bottles. The system was put into operation in 2017 and is still as good as new, having only been in operation for a few hundred hours. The article produced was only sold during Corona. It is also possible to purchase the complete product. Unfortunately there are only a few photos, but we would be happy to send you a video of the system in operation. Klsdpsvmnkrefx Am Ner

Condition: new, Year of construction: 2025, operating hours: 3 h, functionality: fully functional, feed rate X-axis: 7 m/min, workpiece weight (max.): 1,000 kg, working width: 2,500 mm, volume flow: 8,000 m³/h, year of last overhaul: 2025, overall weight: 3,200 kg, type of input current: three-phase, passage height: 210 mm, total height: 2,350 mm, total length: 2,450 mm, total width: 3,500 mm, working height: 950 mm, Ceetec DuoFlex Spray – The Coating Machine for Joiners, Furniture Makers, CLT and Glulam BSH Suppliers, and much more cases. Wherever a solid, straightforward, yet exceptionally well-equipped machine is needed, the DuoFlex Spray surface spray machine comes into play. Spraying doesn’t have to be complicated – not when you have a robust, long-lasting machine (made in Denmark, electronics from Germany – Beckhoff and others) that puts the operator at the center of it all. Everything is intuitive and easy to use, yet you get features you’ll struggle to find elsewhere – or only in significantly more expensive machines. Here are some hard facts about the DuoFlex Spray: Kedpfx Amoffc Tye Njlr 1. Color changes in just 3–5 minutes 2. System volume only 2.5–3L of paint/lacquer 3. Suitable for both solvent-based and water-based coatings 4. Two fully separated circuits – ideal for solvent/water or clear/topcoat separation 5. Maximum reproducibility – thanks to smart programming that stores all key parameters automatically 6. Quick to learn – after just 4–6 hours of training, even a baker can spray better than a manual sprayer with 10 years’ experience 7. Modular expandability – drying systems, sanding units, preheating, robotic integration – all from a single source 8. Service that speaks your language – our owner spent nearly 10 years as a coatings manager and brings hands-on expertise to your shop. The machines are extremely durable, and if anything should go wrong, we maintain well-stocked spare parts warehouses in both Germany and Denmark Processing dimensions for the DuoFlex Spray: 1. Standard: 1,300 mm width × 200 mm height 2. Larger: 1,800 mm width × 200 mm height 3. Up to: 3,200 mm width × 330 mm height Length: from 250 mm up to virtually unlimited. If you want to coat CLT ceiling panels 16, 18, or 20 meters long, we’ll simply build the right handling system for you. Sound interesting? Would you like to try the machine in our technical center? Do you have specific requirements and wonder if we can deliver? Then I’ll be happy to help you personally. Best regards, Martin Bruhn Owner, Bruhn Lackieranlagen // Exclusive Sales Partner of Ceetec A/S – Middelfart, Denmark