Used Floating Pontoon for sale (250)

Condition: used, Used cutter suction excavator Z-243 Operating hours: approx. 600 Application: self-maneuvering cutter suction dredger for cleaning water bodies, sludge removal from water bodies Pumping capacity: up to approx. 350 m3/h Suction dredger depth: approx. 5 m Total length with extension: 13,20 m Overall width: 2.90 m Overall height: 2.70 m Depth: 0.75 / 1.18 m Draught: ready for operation 0.62 m Suction pipe diameter: 150 mm Excavator depth at an angle: 45° for extension 5.0 m Fuel capacity: 300 liters Guedpfxorq I I Ne Ahvoc Cutting speed (variable speed): 0-90 rpm and vice versa Cutting power: 10 kW / 13 hp Deutz main engine: 90 kW / 120 hp Transportable on the road: Yes Largest part for transport: (main pontoon with extension) 11.60 x 2.50 x 2.50 m, approx. 10 tons Cabin: One-man operation in comfortable, low-noise cabin Transport: Can be dismantled and transported by road, overseas transport in containers Pontoons: The hull consists of several pontoons connected by a proven coupling system Coating: Marine coating system and cathodic protection for optimum protection Consumption: Low fuel consumption and low total cost of ownership System: Closed throat cooling system

Year of construction: 2008, condition: excellent (used), We offer a KRONEN GEWA 3800V PLUS vegetable washing machine (year 2008, 6.3 kW, 3×400 V) complete with a KRONEN GE 11 air blow-off unit (year 2008, 2.2 kW, 3×400 V, 50 Hz) a professional, continuous washing and dewatering solution for lettuce, vegetables, herbs and fruit. The GEWA 3800V PLUS is a universal washer for pre-washing, washing, disinfecting, mixing and rinsing both cut and whole products such as baby leaf, iceberg, vegetables, herbs and fruit. It uses KRONEN’s HELICAL washing system, where the product travels through the wash tank in a spiral water flow up to ten times the tank length. This ensures thorough yet gentle cleaning, optimal product distribution and significantly reduced water consumption compared to conventional flotation washers. Floating and sinking products are conveyed through the tank by the helical water flow. At the end of the tank, product and water overflow to the vibration outfeed, where the product is sprayed with fresh water and pre-dewatered, while the water is filtered and returned to the pump tank for reuse. A built-in sand trap separates heavy dirt such as sand and small stones at the bottom of the tank, preventing it from returning to the product flow. The machine is built entirely from AISI 304 stainless steel with excellent hygienic design and easy access for cleaning and maintenance. All pipes, pump casing, wash and pump tanks and covers are stainless steel; in the PLUS models with vibration outfeed there are no screws in the product area, which further improves hygiene. The set includes a KRONEN GE 11 air blower (2008, 2.2 kW, 3×400 V, 50 Hz), designed to blow off water from the product surface after washing. Placed after the washer, it improves dewatering, reduces the load on subsequent centrifuges/dryers and enhances shelf life and appearance of the final product. Technical specification KRONEN GEWA 3800V PLUS Manufacturer: KRONEN GmbH Model: GEWA 3800V PLUS (with vibration outfeed) Year of manufacture: 2008 Max. capacity: up to 2,500 kg/h (depending on product and dwell time) Power: approx. 6.3 kW, 3-phase Voltage: 3×400 V, 50 Hz Gjdpfx Ahjytthmevjuc Tank volume: approx. 800 l (GEWA 3800 PLUS series) Material: AISI 304 stainless steel – pipes, pump casing, wash and pump tanks, covers Outfeed: vibration outfeed with fresh water spray and pre-dewatering Function: continuous pre-washing, washing, disinfection, mixing and rinsing of cut and whole lettuce, vegetables, herbs and fruit Washing system: HELICAL spiral washing system with adjustable water flow Features: Sand trap sedimentation unit for heavy particles Reduced water consumption through recirculation and filtration Compact, modular design – easy integration into processing lines Technical specification KRONEN GE 11 air blow-off Model: GE 11 air blower Year of manufacture: 2008 Function: air blow-off / dewatering after washing – removes surface water from product Power: 2.2 kW Voltage: 3×400 V, 50 Hz

Year of construction: 2026, condition: new, machine/vehicle number: neu, Description: Screening machine on hoe lift with place chassis. Screening in 2 fractions 0-12 mm and oversize larger than 12 mm Throughput capacity greater than 80m³/h (depending on material) Foil sorting via separating chamber and exhaust fan Conveying fan adjacent Discharge belt hydraulically hinged on Central control cabinet with networking possibility to the existing machines (emergency stop) Technical data: Transport width : 2.500 Transport height : 2.700 Transport length : 7.800 screen deck: area length = 4.240 mm; width = 1.200 mm o Screening area 5,4 m², number of shafts 32 pieces o Drive 2 x 7,5 kW gear motors speed adjustable (FU) o Screen body polyurethane (star screen) o Screen shafts as plug-in system (adaptation to other grain sizes easily and cost-efficiently possible) o Central lubrication of the bearings screen deck ( 64 lubrication points) Hopper: capacity approx. 3m³ o Drive 2,2 kW gear motors speed adjustable (FU) A-belt and oversize belt are assembled on site by means of a plug-in system o Total power: 26,5 kW o Hydraulics: via battery 24 V with integrated charger Color: black RAL 9017 / green RAL 6018 or according to customer specification Description: Conveying fan for suction and discharge of floating plastic foils on the screen deck (foil size of the parts max. L= 1.000 mm) suction hose D 300 mm Gjded Rbyhepfx Ahveuc Pressure hose D 350 mm ventilator in the frame adjacent to the screening machine with attachment points and fork holders ( for fork-lift trucks ) Control cabinet with FU from ABB 15 kW control placed outside (control cabinet door) Networking possibility to the existing machines (emergency stop) Delivery time approx. 25 weeks

Condition: new, working width: 85,000 mm, For enquiries regarding the attachment, please contact Mr. Herden (by phone). Seppi M. H3 085 Mulcher / NEW / in stock & immediately available Price: €6,890.00 net / €8,199.10 gross - Working width: 85 cm - Total width: 97 cm - Depth: 80 cm - Height: 66 cm - Weight: 181 kg - Mulching head for mounting on a hydraulic arm - Mulches grass and brush up to 3 cm diameter - Suitable for excavators from 2 to 5 tonnes Gsdpfeyi Ryxex Ahvsuc - Suitable for mounting on various adapter plates - Floating attachment (parallelogram linkage) - Indirect V-belt drive with 3 V-belts - Drive designed for hydraulic motor, depending on the carrier’s hydraulic flow rate - Housing made from wear-resistant AR400 steel - Front protection with chains - Rear guard made of rubber - Reinforced support roller with double taper roller bearings, height adjustable - Colour: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW flails (standard) - 9 pieces, spare part no. 150.02.041 OPT 428 Hydraulic gear motor 11cm³ - With flow control valve and motor safety valve DRAIN SAFE TM to protect the motor in case of improper use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 20 - 50 OPT 529 DRAINLESS system with pressure accumulator (NO leakage oil line required!) - Includes hoses and non-return valve Optional: MS03 adapter plate incl. bolts and installation = €530 net Two hydraulic lines are required: supply and return. No leakage oil line is needed! The unit is supplied without hoses or couplings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a large selection of various Seppi M. products in stock, all immediately available! Simply contact us at / . Financing offer available on request. We are official Seppi M. distributor and service partner. We are official Magni telehandler distributor and service partner. We are official DMS distributor and service partner. We are official Westtech distributor and service partner. We are official JCB construction machinery distributor and service partner. We are official Mercedes-Benz distributor and service partner. We are official Iveco distributor and service partner. We are official Holp distributor and service partner. We are official OilQuick distributor and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Errors and prior sale excepted. = Further Information = Please contact Marius Herden for more information.

Condition: new, working width: 105,000 mm, For inquiries regarding the attachment, Mr. Herden will assist you (by phone at ...). Seppi M. H3 105 Mulcher / incl. rotation motor / NEW / in stock & immediately available Price: €10,590.00 net / €12,602.10 gross - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulching head for mounting on a hydraulic boom - Mulches grass and brush up to 3 cm Ø - Suitable for excavators from 2 to 5 tons - Compatible with various mounting plate systems - Floating mount (parallelogram guide) - Indirect V-belt drive with 3 V-belts - Drive suitable for hydraulic motor depending on the carrier machine's hydraulic flow - Housing made of wear-resistant AR400 steel - Front protection with chains - Rear protection with rubber guard - Reinforced support roller with double taper roller bearings, height-adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW hammers (standard) - 9 pcs., part number 150.02.041 OPT 429 Hydraulic gear motor 17 cm³ - With flow control valve and "DRAIN SAFE TM" motor safety valve protects the motor in the event of incorrect use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 35 - 60 OPT 529 DRAINLESS system with pressure accumulator (NO drain line required!) Gusdpjyix Htjfx Ahvec - Including hoses and check valve OPT 372 Hydraulic 190° rotation device Optional: MS03 adapter plate incl. intermediate flange, bolts and installation = €700 net Two hydraulic lines are required: supply and return. No drain line needed! Additionally, a separate hydraulic circuit is required for the rotator. The machine is delivered without hoses or couplings. Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a wide selection of various Seppi M. products available from stock! Feel free to contact us at / . Upon request, we are happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. product range! Subject to errors and prior sale! = More information = Contact Marius Herden for more information.

Condition: new, working width: 85,000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H3 085 direct / Flail Mulcher / Mulcher / NEW unit / In stock & immediately available Price: €6,690.00 net / €7,961.10 gross - Working width: 85 cm - Total width: 102 cm - Depth: 80 cm - Height: 53 cm - Weight: 165 kg - Mulches grass and brushwood up to 3 cm Ø - Suitable for excavators from 2 to 5 tonnes - AR400: Housing made of high-strength, wear-resistant AR400 steel - Universal interface for mounting various adapter plates - FLOAR: Floating mounting (parallelogram linkage) for adapting to ground contours - Direct drive, no V-belts - Drive for hydraulic motor depending on oil flow - Housing made of wear-resistant steel - Front guard with chains - Rear guard made of rubber - Height-adjustable support roller 133 mm Ø - Colour: anthracite RAL7021, red RAL3020 OPT 039 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMW flails (standard) - 9 pieces, part number 150.02.041 OPT 428 PLUG & PLAY Godsyix Hgspfx Ahvjuc - Hydraulic gear motor 11 cm³ with flow control valve - Required hydraulic pressure in bar (min-max): 150 - 230 - Required hydraulic flow in l/min (min-max): 25 – 60 OPT 529 DRAINLESS system with pressure accumulator (NO drain line required!!) - (max. return line (T) pressure 5 bar) Two hydraulic lines required: supply and return. No drain line! The unit is supplied without hoses or fittings. Optional: MS03 adapter plate including bolts and assembly = €530.00 net We also have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We keep a very large selection of Seppi M. products in our warehouse – all immediately available! Mr. Herden (tel.) will be happy to assist you. Upon request, we are happy to provide you with a financing offer. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Westtech. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Holp. We are an official sales and service partner for DMS. We are an official sales and service partner for Magni telescopic handlers. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Errors and prior sale excepted! = Further Information = Please contact Marius Herden for further information.

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Following brake plates transfer the required longitudinal press force to the wood via friction. Gusdpsv T Aqyofx Ahvsc Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Floating brake elements Pressing force measurement via contact manometer Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed speed adjustable 10-70 m/min Drive power Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Thickness-width ratio 6:10 Wood cross-section for 15/16.5 mm fingers max. 90 cm²

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. High Stability: ±0.02 °C for stable temperature control. Gsdpfx Aexhfl Eohveuc Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Condition: used, • Machine No.: 2529 • Year of manufacture: 2021 • Automatic positioning stops for length adjustment • CNC control system with operator guidance via monitor • Integrated cutting plan display • 2 special cutting heads for laminated glass (VSG) cutting • Lower cutting head can be deactivated for float glass cutting Gujdpfx Ahew Uptzsvjc • Automatic cutting oil supply for both upper and lower cutting heads • Cutting oil canister with fill level monitoring • Automatic breaking roller for opening the lower cut • Lowerable take-off table for opening the upper cut • Separation device with hold-downs, also suitable for LOW-E coated glasses • Continuous special heating element beneath, swiveling • Thermal-mechanical separation device for dividing multiple interlayers • Cut line marking for diagonal cuts by visible laser • Glass flow direction: right to left • Maximum cutting length VSG: 3700 mm • Maximum glass size: 6100 mm x 3210 mm • VSG glass thickness: 2x3 to 2x8 mm • Interlayer thickness: 0.38 to 3.8 mm • Working height: 940 mm +/- 20 mm • Cutting speed: 90 m/min • Cutting accuracy: +/- 0.5 mm • Length alignment: 25 mm to 3700 mm • Automatic length alignment: min. 230 mm x 800 mm • Operator-side turning device • Price on request

Condition: new, ADVANCED FILTERING SOLUTIONS: Filtra.4 made by EUROMAQUINA Filtra4 is the optimal filtration system to achieve a high degree of filtration and purification of industrial liquids. Design and implementation of complete turnkey systems IT ELIMINATES THE IMPURITIES that affect the quality of the emulsion. • Mechanical chips & swarfs • Floating solid elements • Insoluble oils (from greasing, oil carried by raw material, hydraulic oils, oils from slides, etc.) APPLICATIONS of Filtra4 Filtra4 is the optimal solution for various sectors such as: • Tube: both welded as Seamless • Machining centers: grinding, turning • Bars: turning, straightening and polishing • Steel transformation / forming plants • Forging or cold stamping IT IMPROVES THE EFFICIENCY of uour industrial processes 1. No consumables It completely eliminates the use of expensive consumables such as filtering paper or mesh. Filtra4 is an automatic filter that does not require consumables, saving both operating costs, and waste management by extracting them separately. 2.“Zero” maintenance Thanks to its internal self-cleaning system, Filtra4 remains in optimal condition without requiring maintenance intervention. With Filtra.4, you enjoy continuous operation and increased operational efficiency, without concern for maintenance tasks that cause downtime. Gedpfxswq Ngus Ahvjuc 3. High degree of filtration Filtra4 offers highly efficient multi-stage filtration that ensures accurate separation of floating particles and non-soluble oils. 4. Full-surface rotating skimmer Our rotating skimmer allows complete separation and removal of undesired oil contaminants. 5. Automatic mixing addition Forget about adding oil manually. Our system allows to add the necessary amount of soluble, with the desired % of oil. 6. Single or integrated Filtra4 adapts to your needs. It can be integrated into an existing production line to optimize its performance, new and individualized for a specific equipment or centralized to supply multiple lines, providing the flexibility and efficiency that your industry demands. For detailed information, visit our dedicated website: No consumables: Automatic filtering without the use of consumables such as paper or filter mats “Zero” maintenance: Internal self-cleaning system High degree of filtration: Multi-layer filtration with separation of sludge, fine particles and non-soluble oils Full-surface rotating skimmer: Complete and separate removal of contaminating oils Automatic mixing addition: with the desired % of oil Individual or integrated: Can be integrated in one line or centralised for several production lines

Year of construction: 2008, condition: ready for operation (used), A vertical washing and drying system for flat glass is offered: 3 cleaning zones, 6 roller brushes, drying zone (warm air), warm water treatment (heating tank), quartz sand filter, recirculation system, suitable for: float glass, laminated glass, load capacity: 150kg/m², glass thickness: up to 15mm, working height: approx. 2000mm. Inspection possible by arrangement. Gujdpfox Hff Sox Ahvec

Year of construction: 1985, condition: ready for operation (used), Workpiece width: 3200mm, max. force: 555kN, line force: 150N/mm, including Küsters floating roller (S-roller), 1x Raculan, 1x steel roller, on-site inspection is possible. Gusdpfxerm S Exe Ahvec

Condition: new, Year of construction: 2026, Three-phase 400V motor with frequency converter (kW) 3 Saw blade dimensions (mm) 5200 x 34 x 1.1 Flywheel diameter (mm) 480 Cutting speed (m/min) 20 – 120 Clamping width (mm) 610 Working height (mm) 780 Machine dimensions without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard features Ergonomically designed, robust welded frame construction for miter cuts from 0° to 60° right/left Sturdy, low-vibration frame construction with arm joint mounted on plain bearings Clearly arranged control panel on the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for maximum cutting performance Cutting Accuracy Requirements Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed: hydraulic including automatic cutting pressure regulation Miter adjustment and clamping (manual) Hydraulic full-stroke cylinder for vise (pull-down version) Floating vise Blade tension and saw blade breakage monitoring Easily removable chip collection trays Hydraulic blade tension indicator Integrated coolant supply (30 l tank capacity) LED work light Gsdpsukgiqjfx Ahvouc Digital miter indicator Including saw blade with 3/4 combi-toothing Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 12-month warranty for single-shift operation Please inquire about additional accessories. DELIVERY: FREE DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, DIP-TECH AR 6000 (2013) + Integrated Drying Module Gujdpfeymb Tqex Ahvsc Technical specifications: • Max glass size: 3000 × 6000 mm • Min. glass size: 500 × 500 mm • Glass thickness: approx. 4–19 mm • Printing technology: Digital ceramic ink printing directly on glass • Drying module: Integrated dryer included • Ink type: Ceramic inks – tempering compatible • Printing technology: Digital ceramic in-glass printing • Application: Architectural & interior glass • Glass types: Float, tempered, laminated Key Advantages ✔ Large-format industrial printer (6-meter capability) ✔ Integrated drying module – faster production cycle ✔ Improved ink stabilization before tempering ✔ Reduced print defects and handling risks ✔ Suitable for façade, architectural and interior glass ✔ Machine in production – ready for immediate operation Inspection possible under power.

Condition: new, functionality: fully functional, This listing is for information purposes only and does not constitute a legally binding offer. The WARRANTY applies exclusively to machines purchased DIRECTLY from us, not from other dealers. KINGWAY DEUTSCHLAND is the only authorized stationary specialist dealer for the Kingway brand on the German market, with its own dedicated service department. ORDER YOUR MACHINE FROM A DEALER OPERATING NATIONWIDE ACROSS GERMANY! WHEN PURCHASING FROM US, YOU ARE GUARANTEED SERVICE AND THE POSSIBILITY TO MAKE WARRANTY CLAIMS – UNLIKE WITH OTHER DEALERS. Model: ZL918 Neon Operating weight: 4,150 kg Max. load capacity: 1,800 kg Bucket capacity: 0.65 m³ Dumping height: 2,850 mm 4-cylinder diesel engine: 36.8 kW / 2,200 rpm Hydraulic pressure: 16 MPa Steering angle: ±35° Turning radius: 4,500 mm Tyres: 20.5 / 70-16 Ground clearance: 200 mm Travel speed: 28 km/h Dimensions: 5,050 x 1,750 x 2,520 mm FEATURES: - Exceptionally high-quality and robust build - Lockable cab, fuel tank, and engine hood - Heating / ventilation - Rear-view camera - Spacious comfort cab - Easy handling - Highly maneuverable - Compact and versatile - Fully road-compliant lighting system - Hydraulic quick-coupler system - Dedicated hydraulic circuit for attachments - CE certified according to the latest standards and directives - Purchase possible WITHOUT VAT (only with valid VAT ID) - FINANCING available SCOPE OF DELIVERY: - FREE delivery within a 200 km radius - Wheel loader / yard loader ZL918 NEON - Including 4-in-1 bucket + pallet forks - Hydraulic quick coupler - Joystick control - 4x4 all-wheel drive - Float position For each of our loaders, you can additionally order: - Tow bar, - Counterweights, - Any type of accessory, such as push brooms, grapple buckets, snow ploughs, high-volume buckets, sweepers, grab buckets. Gjdpfx Ahsyk Sngjvjuc PRICE: EUR 20,000 net EUR 23,800 gross

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), overall weight: 2,500 kg, lifting power: 1,700 kg/m, This listing is for informational purposes only and does not constitute a legally binding offer. FARMER 810 XL Compact. Powerful. Professional. In response to customer needs, we present the new FARMER 810 XL, featuring a maximum lifting capacity at attachment point of 2,000 kg and a maximum lifting capacity with pallet forks of 1,900 kg. A perfect, agile machine suitable for both private users and businesses! The machine is equipped with a powerful 4-cylinder KUBOTA engine, two driving ranges, and a differential lock. Owing to its weight, it can be transported with a car trailer up to 3.5 t – ideal for landscaping and construction companies. ⸻ ⚠️ IMPORTANT WARRANTY NOTICE The WARRANTY only applies to machines purchased DIRECTLY from us – not from other dealers. ⸻ FACEBOOK GROUP We warmly invite everyone to join our Facebook group “KINGWAY Maschinen.” Here, you’ll find information about new offers and receive support for all questions regarding our machines. ⸻ ⚙️ TECHNICAL DATA Manufacturer: KINGWAY DEUTSCHLAND e. K. Model: FARMER 810 XL • Enclosed cab with heating and ventilation • Road and work lighting • Rear-view camera • Radio • Suspension comfort seat • Heavy-duty axles • Including forks and bucket ⸻ ENGINE SPECIFICATIONS • Engine: KUBOTA V1505 Diesel • Cylinders: 4 • Emission standard: Euro 5 • Power: 18.2 kW / 25 hp at 2,800 rpm • Maximum torque: 92.6 Nm at 1,700 rpm • Cooling: water-cooled • Noise level: 92 dB • Voltage: 12 V • Battery: 12 V / 60 Ah ⸻ ⚙️ DRIVE • Hydrostatic drive with cardan shaft • Bondioli-Pavesi pump • 2 speed ranges + differential lock !!! • Speed range 1: 0–8 km/h • Speed range 2: 8–20 km/h ⸻ CAPACITIES & PRESSURES • Fuel tank: 40 l • Hydraulic oil tank: 50 l • Hydraulic flow rate: 46 l/min • Hydraulic pressure: 180 bar ⸻ ⚖️ WEIGHTS • Operating weight: 2,500 kg • Maximum tipping load: 2,000 kg • Maximum lifting capacity with pallet forks: 1,900 kg • Maximum lifting capacity at attachment point: 2,000 kg ⸻ DIMENSIONS • Steering angle: 42° • Turning radius inside/outside: 1,869 / 3,172 mm • Maximum lift height: 2,210 mm • Dumping height: 1,650 mm • Dumping angle: 45° • Bucket volume: 0.5 m³ • Length: 3,500 mm without bucket • Width: 1,490 mm • Height: 2,320 mm ⸻ TYRES • Standard: 31x15.5-15 agricultural tread ⸻ ⭐ FEATURES • Very high-quality & robust build • EURO attachment system (as standard) • Lockable cab, fuel tank, & engine hood • Heating & ventilation • Rear-view camera • Radio • Spacious comfort cabin • Highly maneuverable & compact • Hydraulic quick coupler system • 3rd and 4th hydraulic circuit • CE certified according to the latest standards • Sale possible WITHOUT VAT (with valid VAT ID) • FINANCING available ⸻ DELIVERY SCOPE • Free delivery up to 200 km • FARMER 810 XL wheel loader • Bucket + pallet forks (4-in-1 bucket on request) • Hydraulic quick coupler • Joystick control • 4x4 all-wheel drive • Road approval (COC) Gsdeyk Edbepfx Ahvsuc • Float function • Operating permit • Differential lock ⸻ ACCESSORIES (OPTIONAL) • Tow hitch • Additional counterweights • Snow blade, sweeper • Grapple, clamshell bucket • High-volume buckets • Work platform ⸻ PRICE €22,500 net €26,775 gross

Condition: used, This listing is for a Raymond A Lamb E65 paraffin section floating out bath. The Paraffin Section Flotation Bath is designed to assist with the handling of paraffin wax samples in histology and pathology laboratories. It is essentially a hot distilled water floating out bath that allows for the meticulous manipulation and location of sections onto glass slides Black interior provides high contrast for viewing samples Temperature range: Ambient to 65°C Analogue control of temperature Heater and overheat lights 22cm Diameter of bowl Dims 33cm (D) x 28cm (W) x 14cm (H) Listing: Raymond A Lamb E65 Paraffin Section Floating Out Bath Guedpfjxzhtrsx Ahvjc

Condition: used, Year of construction: 2022, Overview The rotary filling and capping machine manufactured by Bertolaso in 2022 is currently used for vinegar production. It features 30 filling valves and 4 capping stations and operates based on the atmospheric filling principle. The machine can be used with a wide range of shape-stable containers and is suitable for filling low-viscosity, non-carbonated liquids. Technical details:  Filler: 30 valves (Ø16 mm), model Olimpia 30/1050 Capper: 4 Pick & Place heads, model Sigma P&P 4/350 Bottles: 600 ml & 1000 ml cylindrical (range Ø55–95 mm, H160–360 mm) Caps: Pre-threaded plastic Output: 8,000 bph (600 ml) / 6,000 bph (1000 ml) Material: All product-contact parts in AISI 316 stainless steel Bowl: Electrically height-adjustable, mechanical float level control Features: Automatic valve opening/closing Centralized fill-level adjustment (±50 mm) Maintenance-free lifting cylinders Automated lubrication system Integrated washing/CIP system Remote teleservice via Ethernet Safety: CE compliant, transparent guards with microswitches Includes: Format parts for 600 & 1000 ml bottles; adjustable star wheels (+/- Ø55-95mm)   Gusdpfx Asxqz D Aehvsc

Condition: new, functionality: fully functional, power: 26.48 kW (36.00 HP), color: red, overall weight: 2,800 kg, Year of construction: 2024, operating hours: 1 h, Equipment: 4 in one shovel, all wheel drive, cabin, pallet forks, We deliver machines to any European country! The FARMER 811 PRO wheel loader is one of our most popular models. We have been selling it for 10 years, meaning that hundreds of satisfied customers rely on it. Equipped with a 4-cylinder, 36 HP engine and a 2-speed transmission, this is a reliable machine for all industries. Its strong and robust design ensures operation under all conditions. TECHNICAL SPECIFICATIONS: - Manufacturer: KINGWAY DEUTSCHLAND e. K. - Model: 811 PRO - Full cab with heating, ventilation, road and work lighting, rear-view camera, radio - Hydraulic quick coupler - Suspension seat ENGINE DETAILS: - Engine: Yunnei DEF20NJF4 - Diesel - Cylinders: 4 - Emission standard: Euro 5 - Max. rated output: 18.2/25 kW / 25/36 HP at 2,800 rpm - Max. torque: 66.9 Nm at 1,600 rpm - Cooling system: Water-cooled - Noise level: 101 dB - Power supply: 12V - Battery: 12V / 120 Ah DRIVE: - Drive unit: Torque converter (2 driving ranges) - 4x4 wheel drive - Travel speed (range 1): 0-8 km/h - Travel speed (range 2): 8-20 km/h CAPACITIES AND PRESSURES: - Fuel tank capacity: 40 liters - Hydraulic oil tank capacity: 55 liters - Max. hydraulic oil flow: 48 L/min - Max. hydraulic pressure: 180 bar WEIGHTS: - Operating weight: 2,800 kg - Max. tipping load: 1,800 kg - Max. lifting capacity (at mount): 1,000 kg DIMENSIONS: - Steering angle: 42° - Turning radius (inner/outer): 2,350 mm / 4,200 mm - Lift height (lower edge of standard bucket): 2,580 mm - Dumping height (with standard bucket): 2,080 mm - Dumping angle: 39° - Standard bucket: 0.5 m³ capacity - Overall length: 4,650 mm - Overall width: 1,600 mm - Overall height: 2,450 mm - Track width: 1,270 mm - Wheelbase: 2,140 mm TYRES: - Standard: 31x15.5-15 agricultural tread - Optional: 10-16.5 industrial tread FEATURES: - Very high-quality, robust construction - Standard Euro mount - Lockable cab, tank and engine hood - Heating / ventilation - Rear-view camera - Spacious comfort cab - Easy operation - Extremely maneuverable - Compact and highly versatile - Lighting system / road lighting - Hydraulic quick-change system - Third hydraulic circuit for attachments - CE certified to the latest standards and guidelines Gujdpfxsvz U Sxe Ahvec - Sale available net of VAT (with VAT ID only) - FINANCING available SCOPE OF DELIVERY: - FREE delivery within 200 km - One FARMER 811 wheel loader / yard loader - Including bucket + fork (4-in-1 bucket available on request) - Hydraulic quick coupler - Joystick control - 4x4 all-wheel drive - EURO MOUNT - ROAD APPROVAL - Float position - Operating permit for Germany For any of our loaders you can also order: - Trailer coupling - Additional counterweights - Any possible accessories such as scraper, grapple, snow plow, high-volume buckets, sweeper, grab bucket PRICE: €17,800 net €21,182 gross WARRANTY: - Each machine comes with a 12-month warranty, extendable for an additional year. - After the warranty expires, we ensure access to all spare parts for our customers. SERVICE: - We have our own mobile service, which supports all our customers both within and outside of Germany.

Condition: new, functionality: fully functional, Year of construction: 2026, Chain excavator WOODGRAIN GF-1500 max 12/15KM EXCAVATION DIMENSIONS 600 X 100 MM The WOODGRAIN GF-1500 chain excavator is a professional machine designed for excavating for cables, pipes, irrigation, digging trenches for water installations or irrigation systems. Thanks to its precision, speed, dimensions, it will easily perform excavations near fences or other objects, in hard-to-reach places even with very hard ground! Only one person is required for operation. Machine Specification CE Certificate, DTR: YES Engine Capacity: 420cc Fuel: Petrol Efficiency: 60m/h Digging Width: 100mm Digging Depth: 150,300,450,600mm Teeth: 27 carbide teeth Chain Length: 2000mm Chain Speed(Max): 550m/min Tire: 145/7.0-6 Height: 1100mm Length: 2100mm Width: 720mm Gross Weight: 188 kg Engine technology: 4-stroke, Single cylinder, air-cooled, OHV (overhead valve) Gedsvzqk Rjpfx Ahveuc Displacement (cm3): 420 Cylinder: Cast iron sleeve Cylinder diameter (mm): 90.0 Stroke (mm): 66.0 max 3600 rpm Fuel tank capacity (l): 6.6 Oil system capacity (l): 1.1 Dry engine weight (kg): 31.0 Dimensions: length (mm): 499 Dimensions: width (mm): 370 Dimensions: height (mm): 443 Max engine power (EPS*): 15 HP *EFFECTIVE POWER SOLUTIONS Engine Features: OHV Technology - optimal performance guaranteeing longer engine life and greater fuel savings. Lo-Tone PRO Muffler - Lowest audible sound level (significantly lower DB) TWO air filters - no airborne contaminants into the engine (protection) Speed ​​control - regulates speed to provide more usable power in difficult conditions. Cast iron sleeve - reinforcement and durability, providing resistance to wear and overuse while improving oil control. Double ball bearings - provides additional durability and extends engine life. Float carburetor - the right amount of fuel, which improves engine start-up along with fuel economy High torque - more power, higher efficiency! Protective cover against ejection of excavation spoil

Year of construction: 2026, condition: new, Manual Bag-in-Box Filler with Digital Scale • Made entirely of stainless steel, including all fittings, floats, and nuts • Steam sterilizable • Capacity: 130 l/hour per filling tube Guodpfx Aov Srgbohvec • With mechanical float valve in the reservoir • Optional pump ⚙️ Technical Information Capacity: up to 400 L/h Material: WNr. 1.4301, AISI 304 stainless steel Dimensions: Length: 820 mm Width: 500 mm Height: 1910 mm Weight: 22 kg With Bag-in-Box filling systems: 32 kg Optional pump

Year of construction: 2025, condition: new, Stainless steel bottle filler with 3 filling heads The bottle filler with pump is made entirely of stainless steel. The filler is equipped with heavy-duty, industrial filling heads that allow for automatic and adjustable filling height of the bottles. The system is suitable for wine, beer, oil, detergents, and more. • Made entirely of stainless steel, including all connections, floats, and nuts • Can be steam sterilized • Capacity: 130 l/hour per filling tube • With mechanical float valve in the reservoir • 3 filling heads • Optionally with pump This bottle filler is equipped with filling heads for fruit juice as standard. ⚙️ Technical information Capacity: up to 400 L/h Gjdjv Srcijpfx Ahvsuc Material: WNo. 1.4301, AISI 304 stainless steel Dimensions: Length: 820 mm Width: 500 mm Height: 1910 mm Weight: 22 kg With bottle filler: 28 kg

Year of construction: 2025, condition: new, These tanks are ideal for cider mills and wineries for contract pressing. They can serve multiple customers simultaneously and continuously without having to stop pressing. With the help of valve settings, you can designate the specific tank for specific customers. The juice does not mix with other juices. Depending on customer preferences, we manufacture containers in various sizes: 200 L, 500 L, 1000 L. Technical Information • Capacity: 300 L (3x100L) • Material: Wnr. 1.4301, AISI 304 stainless steel • With floating lid Gujdpfx Ahotpxm Dovoc • Fill level indicator Dimensions: • Length: 1250mm • Width: 508mm • Height: 350mm • Diameter: 398mm • Overall height: 1100mm • Tank height without legs: 850mm • Leg height: 250mm • Weight: 60kg The dimensions apply to one container!

Condition: excellent (used), Edging line edger with optimization PAUL AB920 - in a warehouse - German production - DTR - optimization of the cutting width - cross cut saw - automatic disc spacing TECHNICAL PARAMETERS: - max. workpiece width 920 mm - max. workpiece height 90 mm - max. workpiece length 6000 mm - main engine power 37 kW - disc diameter max. 300 mm - spindle diameter 60 mm - sleeve diameter 70 mm Guodpfx Aeia Nypshvsc - fixed sleeve 60 mm long - floating sleeve for 1 disc - floating sleeve with a spindle 100 mm long - number of measuring heads 15 - spacing of measuring heads 350 mm - distance between the measuring heads - total feeder power 10 kW - cross-cut saw for cutting the material to a length of 2630 mm - saw leveling the material - cascade for transporting the board - hydraulic feed with smooth speed regulation - hydraulic material pressure - hydraulic material height adjustment

Condition: excellent (used), Year of construction: 2006, USED HOMAG HPP250R/44/44 PANEL SAW TECHNICAL CHARACTERISTICS. Godpfjixz A Esx Ahvjuc Specifications: Cutting width of (4,400 mm) maximum cutting height (72 mm) of the main saw; 10 HP (7.5 kW) and 3 HP (2.2 kW) scoring motor, 4400 RPM main blade and 5100 RPM scoring blade. saw cart working speed of (80 M/min), return speed of (80 M/min), driven by AC electronically controlled inverter drive; Quick blade release "Power-Lock" system. automatic cut length controlled by optical sensor that detects the blade through the cut Pliers pusher: (7) material grippers, (0-60M/min) forward speed and (0-60M/min) return speed, AC inverter driven, center mounted rack and pinion servo motor; Friction-free contact measurement system, magnetic measurement system. Control and machine operator: Controller software PC with: Homag "CAD MATIC " Operating system + "Windows"; full "REAL TIME" user friendly operating menu; 15" full-color graphics monitor, standard optical mouse and keyboard for data entry; basic on-board "Easy Cut Optimizer" organizes up to (15) pieces of (3) different materials, data loading from a PC from the office is possible, the possibility to link third party optimization software. With complete : (4) air float tables (600 x 1,800 mm), tables are individually selectable with a common 5 HP (4 kW) blower motor HOMAG MODEL HPP250 R 44/44 USEFUL CUT 4,400 X 4,400 MM USEFUL CUTTING HEIGHT 72 MM Nº4 FRONT AIR TABLES Nº 7 PNEUMATIC PLIERS TO FIX BOARDS LOWER PNEUMATIC SIDE LAYER SILENT DRIVE CARRIAGE SYSTEM ACTUATED BY RACK AND PINION ELECTRICAL PANEL WITH AIR CONDITIONING OPTIMIZATION SYSTEM WITH LABELING MACHINE