Used Fmg Vacuum Pump for sale (12,219)

Condition: used, Leybold Trivac D8B vacuum pump with a single-phase motor, 230V, 50Hz. Nwedpfx Aioz Hcgbo Ton

Condition: used, Leybold Trivac D4B vacuum pump with a single-phase motor, 230V, 50Hz. Njdpfxez Hcguj Ai Tjwn

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 S/N: D18451643 MFG: 2018 New air filter Nominal pumping speed: 62 m³/h Nsdozz Tm Ropfx Ai Town Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Lubrification: dry/oil-free Cooling: air-cooled Description: The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. 3. Materials & Thermodynamics of the "O2" Variant Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Price: 3.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 2001, Pumping capacity/flow rate: 16/19 m³/h Nedpfx Aezqd Evei Tswn Pump originally from a Lisec A2RL (molecular filling system) Width: 570 mm Depth: 250 mm Height: 510 mm Condition: good, second-hand

Condition: new, functionality: fully functional, machine/vehicle number: 3514178/6526450, overall weight: 8 kg, power: 0.55 kW (0.75 HP), input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 2,870 rpm, protection type (IP code): IP55, The pump shown is a powerful vacuum pump designed for industrial and research applications. It offers high pumping speed and efficient vacuum generation, ideal for processes that require a reliable vacuum. With its robust design and user-friendly operation, it ensures a long service life and low maintenance costs. The pump is also energy efficient and helps to reduce operating costs. Thanks to its compact design, it can be easily integrated into existing systems. Nwedpfsuu R U Esx Ai Tsn

Condition: used, Leybold Sogevac 40BI vacuum pump. Nwsdpez Hc Avsfx Ai Tjn

Condition: good (used), Year of construction: 2011, Item: M-8698-Busch-Vacuum pump 75 kW Used Vacuum Pump Busch, Type WT0730AMX MAX. Vol: 73 m3/min Nwjdpfx Ajnnz Rpoi Tjn Motor: Høyer Motors Denmark 75 kW Year: 02-2011

Condition: used, Year of construction: 2007, Gardner Denver VLT 40 oil-free vacuum pump, 150 mbar, 1.5 kW Manufacture: Gardner Denver Type: VLT 40 (01) Year of manufacture: 2007 Total: 1.5 kW Speed: 1420 r/min Weight: 52 kg Air delivery: 42/50 m3/h Nwsdpfx Asufiq Eei Tsn Max vacuum: 150 mbar IP55

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 241 kg, total length: 1,144 mm, total width: 644 mm, total height: 528 mm, volume flow: 244 m³/h, final pressure: 200 bar, input voltage: 400 V, input frequency: 50 Hz, input current: 3 A, warranty duration: 12 months, BECKER VTLF 2.250 – Dry-running rotary vane vacuum pump, oil-free Nwodsz I Rcmopfx Ai Ten BECKER VTLF 2.250 industrial vacuum pump, designed for continuous operation and completely oil-free. The self-lubricating graphite composite vane technology allows for oil-free operation in the compression chamber, reducing maintenance and operating costs. Flow rate 244 m³/h, ultimate vacuum 200 mbar absolute, motor 5.5 kW, power supply 400 V three-phase – 50 Hz, air-cooled, and noise level 77 dB(A). Equipped with an integrated air filter and a regulating valve. Suitable for CNC machines and vacuum tables, woodworking, packaging, printing and paper, plastics, pick & place handling, vacuum clamping, and industrial automation. Condition: new, 2026, we ship worldwide.

Condition: excellent (used), Vacuum pump Pfeiffer (28648) Type UNO 012A Nodpjwtcr Aofx Ai Tswn Suction capacity 12 m3/h 220 Volt 0.55 kW Length 490 mm Width 220 mm Height 260 mm

Condition: refurbished (used), Busch vacuum pump RA302D, completely overhauled. 0.5 mbar, 300 cm³/h, 5.5 kW. 2 units available from stock. Nedpfjwv Rc Iox Ai Tjwn

Condition: refurbished (used), Vacuum pump unit, manufacturer Leybold, consisting of: - 01 rotary vane vacuum pump, type Trivac D65 B - 01 roots blower, type WAU 251 The fully overhauled vacuum pumps are available for delivery approximately 4-6 weeks after ordering and are ready for immediate use. We recommend installation only by trained personnel. Nsdjvyzkropfx Ai Town Adaptation materials available on request. Oil filling: LVO 100 Technical data Trivac D65 B: Including roots pump adapter Pumping speed: 65 m³/h (50 Hz) / 75 m³/h (60 Hz) Sound level according to DIN 45 635, without / with gas ballast: 57 / 59 dB(A) Dimensions (LxWxH): 794 x 234 x 317 mm Oil filling min/max: 2.0 / 3.3 l Ultimate pressure: 5x10-3 / 2x10-3 mbar Double oil filter and oil mist separator available optionally on request Automatic oil return available optionally on request Technical data WAU 251: Pumping speed: 253 m³/h (50 Hz) / 606 m³/h (60 Hz) Sound level according to DIN 45 635: 64 dB Dimensions (LxWxH): 752 x 390 x 320 mm Oil filling: 1.6 l Ultimate pressure: 2x10-4 / 8x10-4 mbar Subject to prior sale! This offer is valid only for customers within Germany and other European countries!

Condition: excellent (used), Electric Hydraulic Pump - Power supply: 380V - Oil capacity: 7 liters - Pressure: 25 Bar Nwjdpfx Ajz Sk D Iei Ten - Condition: very good.

Condition: used, Elmo Rietschle (Gardner Denver) G200 Industrial Side Channel Blower / Vacuum Pump (12.5 kW, 2BH1900-7AH17), Used Equipment Technical Data: Manufacturer: Gardner Denver Schopfheim GmbH / Elmo Rietschle (Made in Germany) Type: G 200 / 2BH1900-7AH17 Factory Identification No.: BN 10024286 007 / 1007 Protection Rating: IP55 (totally enclosed, protected against dust and water splashes) Electrical and Performance Data (50 Hz / 60 Hz): Motor Power (50 Hz): 12.5 kW (2920 RPM) Motor Power (60 Hz): 14.5 kW (3500 RPM) Supply Voltage (50 Hz): 345–415 V (Δ) / 600–720 V (Y) Current Consumption (50 Hz): 28 A (Δ) / 16.2 A (Y) Maximum Vacuum / Differential Pressure (50 Hz): -290 mbar / +280 mbar Maximum Vacuum / Differential Pressure (60 Hz): -270 mbar / +260 mbar Features: Robust industrial cast-aluminium housing with cooling fins Oil-free generation of clean compressed air / vacuum Supplied with connected extraction pipework and support frame Overall Dimensions: Nwjdpfez Rzt Ajx Ai Tsn Width: 730 mm Depth: 640 mm Height: 1090 mm

Condition: good (used), Elmo Rietschle VC300 Vacuum pump Nodpfx Aiowmdaho Tewn 3x Elmo Rietschle oil lubricated rotary vane pumps, 5.5Kw, 300 M3/H flow rate

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: DEM120281014, overall weight: 80 kg, total length: 1,000 mm, total width: 400 mm, total height: 1,000 mm, power: 1.1 kW (1.50 HP), type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,420 rpm, Schmalz VAGG 40 AC3 80 Vacuum Pump – 80 l tank, mobile, automatic ✅ Mobile on 4 wheels (easy integration) ✅ 80 l vacuum reservoir (stable pressure maintenance) ✅ Automatic control (-0.7 to -0.8 bar) ✅ Warning signal in case of underpressure/power failure ✅ Very good condition, few signs of use Ideal for CNC clamping technology, as well as for clamping and moving panels in carpentry or metal construction. Accessories for panel clamping are also available used upon request. The vacuum pump can be inspected and tested in Leinfelden-Echterdingen. Nwodezqvpyjpfx Ai Tsn

Condition: like new (used), functionality: fully functional, overall weight: 8 kg, input voltage: 220 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 2,840 rpm, protection type (IP code): IP55, The pump shown is a powerful vacuum pump designed for industrial and research applications. It offers high pumping speed and efficient vacuum generation, ideal for processes that require a reliable vacuum. With its robust design and user-friendly operation, it ensures a long service life and low maintenance costs. The pump is also energy efficient and helps to reduce operating costs. Thanks to its compact design, it can be easily integrated into existing systems. Nwjdpeuu Sh Tsfx Ai Tjn

Condition: excellent (used), Year of construction: 2021, operating hours: 21,000,575 h, functionality: fully functional, machine/vehicle number: 21000575, Peristaltic pump ALLMOVE ASH 15 GN-ID/1, year 2021, serial number: 21000575, very good condition Peristaltic pumps of the ASH series from Allweiler have a unique design that allows them to work with the most complex liquid media. They are capable of pumping almost any fluid or very viscous substances, including aggressive agents or flows contaminated with solid or fibrous inclusions. Pumps of this type are widely in demand in many industries as an effective and reliable means of transporting liquids of various natures. The working unit is based on the following design elements: a thick-walled elastic hose for conducting liquids and a rotor with a shoe for pressing and pushing the flow. With this pumping principle, there is no turbulence or emulsification of liquids. Self-priming units are easy to set up and install, with the possibility of reversible operation. Sealing of the drive with a sealing ring. The cooling agent is located directly in the pump body. Pumping liquids: highly viscous substances, containing abrasive, solid particles or fibres, gas-containing, aggressive agents. Application areas: wastewater treatment, chemical industry, paper production, food industry, agriculture, etc. Characteristics of ALLMOVE ASH 15 GN-ID • Volumetric flow: up to 60 m³/hour; • Supply pressure (PD): up to 16 bar; • Differential pressure: up to 15 bar; • Liquid viscosity: up to 100,000 mm²/s; • Permissible sizes of solid particles: 5 - 33 mm; • Permissible fiber length: 150 - 820 mm; • Liquid temperature: up to 80 °C; • Installation: dry, horizontal, on a support plate. Price Euro 2.900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Nwodpfx Aijwhmm Ho Tsn Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabilă. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français/Vorbim romana

Condition: used, functionality: unexamined, machine/vehicle number: AA40 WN, overall weight: 240 kg, volume flow: 42 m³/h, input voltage: 220 V, Used Ebara AA40 WN Dry Vacuum Pump Manufacturer: Ebara Model: AA40 WN Nodpfsxlikmex Ai Tjwn Ultimate Pressure: 0.2 Pa Capacity: 4200 L/min Power: 200/220 Volt, 50/60 Hz (3Ph.) The Ebara AA40WN dry pumping system is a microprocessor-controlled, modular dry pump package that offers exceptional control and monitoring capabilities. The AA40WN pump system can be locally operated via a handheld or mounted LCD control panel.

Condition: good (used), Item: D-01876-Busch Vacuum pump Vacuum Pump Buusch, Type WN65 AO, Nwedpfeirfa Isx Ai Tjn Motor 7,5 kW

Condition: excellent (used), Liquid ring compressors, vacuum pump, rotary vane pump, rotary vane vacuum pump, liquid ring vacuum pump, positive displacement pump -Manufacturer: Flowserve, spare parts for liquid ring vacuum pump Nwedpfx Aisvmq Nwj Tjn -Item No.: see photos -Price/Fee: complete -Transport dimensions: 350/260/H180 mm -Weight: 13.4 kg

Condition: refurbished (used), We offer you the Edwards GV600/EH4200. Condition: fully overhauled. Nwodpfxjw Afmbe Ai Tsn

Condition: new, Year of construction: 2024, Rexroth hydraulic pump set (3-pump system) Main pump (servo): • Type: Rexroth SYDFEE-20/071R • Design: axial piston pump with variable displacement • Control: electro-hydraulic (servo) • Function: adjustment of output, pressure, and power • Application: injection molding machines, energy-saving systems • This is a high-end system – precise process control Auxiliary pump: • Type: Rexroth A10VSO 71 DR • Output: approx. 71 cm³/rev • Working pressure: up to 280–315 bar • Design: axial piston pump A standard, very popular industrial pump Combined system: • Configuration: tandem / 3-pump system • Includes: Nsdoy Augqopfx Ai Tjwn o Hydraulic block o Control valves o Sensors o Control system NEW complete hydraulic module for machine (ENGEL 650 ton injection molding machine)

Condition: used, functionality: unexamined, Ferwood Code: RU0002544 - Manufacturer Code: VTLF 2.250/0-79.1 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer refurbishment services. Please contact us. 235KG 120X80X70 Nedpfx Aoyrphtji Tswn

Condition: refurbished (used), Year of construction: 2015, Technical specifications: Product number Nwjdpezvrluefx Ai Tjn WV 2000 C 001 Year of manufacture 2015 Capacity 2000 m3/h Max. vacuum 0.1 mbar For more information, please contact us by phone. The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a major overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar, as demonstrated in the recorded video.