Used Fortuna 60 64 110 Ø 60 Mm for sale (107,578)

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, driving flange, lathe chuck face plate, chuck flange for power chucks Ljdpfx Asv T Ua Hjcfjaf -Chuck flange: for power chucks, three-jaw chucks, four-jaw chucks, faceplate -Type: 55021/22-6 Ø 210 mm -Passage: Ø 44 mm -Bolt circle: Ø 105 mm -Mounting: cone Ø 79-82 mm -Dimensions total Ø 205 x 160 mm -Weight: 6.3 kg

Condition: good (used), rack, toothed rail -Rack: Toothed rail, straight teeth -Length: 1000 mm -Width: 60 mm -Height: ha 60 mm -Module: 6 (see photo) Lajdspxq Uvopfx Acfsf -Dimensions: 1000/60/H60 mm -Weight: 25.1 kg

Condition: good (used), fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial fan, axial fan, fan motor -Fan: axial fan axial fan -Motor: Type D 564 0.11 kW / 1350 rpm -Total dimensions: Ø 440 x 200 mm -Weight: 3.5 kg Ljdpfjuqq Nzox Acfjaf

Condition: good (used), Rotary table, rotary dividing table, dividing attachment, dividing head -dividing head: with: three-jaw chuck Lajdpfxoitv Ate Acfjf -Three-jaw chuck: Ø 160 mm, inner Ø 42 mm -Spindle bore: Ø mm -Center height: 130 mm -Total dimensions: 520/490/H260 mm -Weight: 89 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: approx. Ø 90 mm -Piston rod: Ø 60 mm -Pipe outer diameter: 120 mm -Stroke: 940 mm -Total length when retracted: 1510 mm -Piston tube mounting: Ø 25 mm -Piston rod mounting: Ø 35 mm Lajdpfxochaynj Acfjf -Ideal for building a hydraulic press -Quantity: 1 piece available -Weight: 80 kg

Condition: good (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Transport roller: Diameter 320 mm -Transport width: 605 mm -Shaft: Mountings Ø40 x 110 mm -Quantity: 1x transport roller available -Dimensions: Ø 320 x 795 mm -Weight: 68 kg Lasdpfx Aelzmxkscfsf

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Lodpfx Acsd Tdz Hjfsaf -Chuck size: Ø 160 mm -DKRD Ø: 160 mm -Weight: 15.5 kg

Condition: used, Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outside/Inside: Ø 125/60.3 mm -Height: 58 mm -Number: 12x pillows available Ljdpfx Aod Sqyiocfsaf -Price: per piece -Weight: 1.3 kg/piece

Condition: used, Pipe sealing cushions, leak sealing cushions, sealing plate, pipe sealing, breakthrough sealing -Pipe sealing cushions -Outer/inner diameter: 250/160 mm -Height: 20 mm -Hole circle: Ø 204/7 mm -Delivery of: steel/stainless steel cover plates possible -Number: 42x pillows available -Price: per piece -Weight: 0.7 kg/piece Lsdpfx Aod Ta N Recfeaf

Condition: used, Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 350/160 mm Ledped Tcmtofx Acfjaf -Height: 63 mm -Weight: 13.9 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Ljdpfod R Hrdex Acfjaf -Chuck size: Ø 160 mm -TGL: 30-2312 -Weight: 11.2 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine Laodpfed N Apqjx Acfjf -Tip height: 110 mm -Dimensions: 218/117/H190 mm -Weight: 11 kg

Condition: used, Base for folding tool, bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine -Tool for: press brake Laedpjfiqrmofx Acfof -Support for: press brake tool -see drawing: at the photos -Number: 2x documents available -Price: per piece -Dimensions: 3600/110/H32 mm -Weight: 76 kg

Condition: good (used), Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 560 mm -Wall thickness: 16 mm -Length: 2880 mm -Number: 3x steel pipes available -Price: per piece Lasdpjzfafhofx Acfef -Weight: 214 kg/m²

Condition: good (used), Ride-on scrubber-dryer, scrubber-dryer, floor cleaning machine, mop, floor cleaner, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter -Air filter: Intake air filter -Type: unfortunately without a type designation -Inside/Outside: Ø 215/350 mm Ljdpozd Ac Tjfx Acfjaf -Dimensions: Ø 350 x 605 mm -Weight: 6.1 kg

Condition: excellent (used), Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearings. Double row, unused. -Type: NNU4960E4C3DR -Outer diameter: 420 mm Ledpjzbrkcjfx Acfsaf -Inner diameter: 335 mm -Width: 120 mm -Number: 2x cylindrical roller bearings available -Price: per piece -Dimensions: Ø 420 x 120 mm -Weight: 34.7 kg/pc.

Condition: used, Battenfeld plasticising screw Ø 18 mm- as good as new - removed from Battenfeld VM75/60/60 R1040 - removed from running machine - fully functionalinlet: 17,80 mm centre: 17,80 mm outlet: 17,80 mm Lajdpfxou Tv A De Acfjf stroke volume: 22.9 cm³ injection pressure: 2593 bar manufacturer: Battenfeld type: Ø 18 mm spare part no.: 100TM842 Dition: neuwertig

Condition: used, Battenfeld plasticising cylinder Ø 18 mm, IU60 vertical- removed from Battenfeld VM75/60/60 R1040 - removed from running machine - fully functionalinlet: 18.03 mm centre: 18,01 mm outlet: 18,02 mm stroke volume: 22.9 cm³ Lasdpfx Ajrr Efrscfsf injection pressure: 2593 bar manufacturer: Battenfeld type: Ø 18 mm, IU60 vertical spare part no.: 100WW548- removed from Battenfeld VM75/60/60 R1040 - removed from running machine - fully functionalstroke volume: 22,9 cm³ injection pressure: 2593 bar manufacturer: Battenfeld type: Ø 18 mm, IU60 vertical spare part no.: 100WW548 Dition: gebraucht

Condition: new, Year of construction: 2026, machine/vehicle number: FGWPEP40EJSD07533, fuel type: diesel, motor manufacturer: Perkins 1104C-44TAG2, General information Field of application: Construction Weights Empty weight: 1.254 kg Functional Generator capacity: 110 kVA Dimensions of cargo space: 209 x 112 x 153 cm CE mark: yes Laodpfx Acsy Nhu Isfef Other information Fuel consumption: 16.5 L/Hour at 75% Load Prime Generator: FG Wilson FGL30040 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 218 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank

Condition: like new (used), Year of construction: 2022, machine/vehicle number: P 710, functionality: fully functional, power: 5.5 kW (7.48 HP), oil tank capacity: 120 l, overall weight: 6,500 kg, control type: CNC control, Machine is in as-new condition. The High Quality Press Brake (HQPB) represents the top model of the Placke range of press brakes. The entire manufacturing process, from hydraulic cylinders to control cabinet assembly, is performed in-house. By combining state-of-the-art technology with many years of expertise in forming technology, the HQPB series enables precision bending at the highest level. Even the standard configuration provides a fully functional press brake. This package of safety, reliability and efficiency, together with user-friendly operation, allows us to meet the highest demands and tolerances in the bending process. Machine Frame: - Base machine constructed from S 355 N steel - Side supports with 2 pressure pipes and an overhead oil tank, welded - Above-floor design - Coating (2-component structured lacquer), light grey (RAL 7035) and signal grey (RAL 7004) Upper Beam: - Press beam stress-relief annealed - Depth of stroke measurement, reading head guided by ball bearing rails - Separate Y1 and Y2 control, electronic monitoring of parallelism Hydraulic System: - Hydraulic proportional control valve with electronically monitored cylinder synchronization - Solid steel cylinders with inductively hardened piston rod - Low-noise internal gear pump Punch Clamping: - Upper tool holder system WILA, hydraulic clamping system, Type NSCL-II-HC, fully hardened, Maximum load: head bearing = 250 t/m, shoulder bearing = 300 t/m Lower Beam: - Narrow table incl. manual clamping strip, dimensions: 48 mm high, 70 mm wide - Reinforced lower beam. Mechanical crowning compensation is structurally unnecessary. - Single V-die holder (13x20) - Working height: 1050 mm (with 55 mm die height) Front Side of Machine: 2 aluminum support arms at the front, approx. 600 mm long, incl. 2 flip stops, measuring tape, and plastic wear strip. The support arms are adjustable via ball guides and height-adjustable from 55 mm to 100 mm die height using a slotted adjustment. The ball guide is milled into the lower beam. Control and Regulation Technology: - Operating voltage 400V / 3Ph / 50Hz - Switching and safety components by Telemecanique - Backgauge with AC servo technology - Pilz safety PLC Backgauge “2-axis control”: - X and R axes CNC-controlled - Z-axis manual Delem DA 66 Touch control panel on swivel arm. Safety devices in accordance with CE standard Technical Data and Working Range: Press force: 600 kN Working length: 1550 mm Distance between frames: 1200 mm Installation height: 400 mm Throat depth: 255 mm Ram stroke: 215 mm Ram Speeds: Rapid approach max. 280 mm/s Press speed max. 9.8 mm/s Return speed max. 170 mm/s Ram positioning accuracy: ± 0.01 mm Ram tilt: ± 10 mm Electronically limited to ± 5 mm Lower beam height above floor: 947 mm Motor power: 5.5 kW Main dimensions: Below-floor depth: 0 mm Lasdpfxoyvzkio Acfjf Pit depth for side frames: 0 mm Machine weight: approx. 6.5 t Tank capacity (hydraulic oil): 120 l (Specifications subject to change) Rear machine lighting: Work area illumination via LED light strip in the area between the side frames.

Condition: new, pressure: 60bending length: 1550column width: 1250daylight: 410stroke lenght (max.): 220column throat depth: 400messurements (LxWxH): 2445x2200x2390weight approx.: 4250motor power: 7,5 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK-Industries made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X via the control. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X  Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Ljdpfx Asd En R Djcfsaf Laser safety device on the upper beam CE protective equipment various options available Option: r-Achse                                                                                   ¤ 5.375,-- Other controls: ESA 640 2D 15'' touch screen control                                     ¤ 4,520.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)      ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)    ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)     ¤ 16.350,00

Condition: new, Your contacts within our company: Mr. Andre Evering Mr. Mario Klöver Ledjh Dv Uqspfx Acfsaf Mr. Falk Deutsch Mr. Simon Blank Technical data for the pallet racking crossbar: Racking system: Mecalux The scope of delivery includes: 01x Pallet racking crossbar, new Material color: RAL 2001 orange Suitable for frames: A103 Crossbar type: 2C-S 1115 Box profile: 110 x 50 mm Clip: G.E. - 3 Clear width: 2,700 mm Weight / piece: approx. 15.026 kg Max. load per crossbar pair: 3,000 kg, with evenly distributed load 02x Integrated locking pins, new To secure the longitudinal supports against unintentional lifting out General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices on request) Assembly, installation Please note our general assembly conditions Racking inspection Racking inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: new, For sale: high-quality BOA compensating (flexible) hose made of stainless steel, designed for industrial applications. 📋 Technical data: Manufacturer: BOA Type: SP20 (Ringwellschlauch) Nominal diameter: DN50 Length: 1100 mm Working pressure: PN16 Connections: flanged Material: stainless steel (INOX) Construction: corrugated hose + steel braid Certifications: DIN / VdS Lajdpfx Aoyzixlocfsf ⚙️ Applications: industrial installations water and gas systems heating and steam systems compensation of vibrations and thermal expansions protection of pumps and fittings 📦 Condition: New – old stock (NOS) Possible minor storage marks (visible in the photos). Product fully functional, unused. ✅ Advantages: high resistance to temperature and pressure very good flexibility durable stainless steel construction reduction of vibration and noise in the installation 📸 Included in the offer: Exactly what is shown in the photos.

Condition: new, Year of construction: 2026, Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Simon Blank Included in the scope of delivery: 1x End frame extension, new Design: Universal Material color: RAL 1018 Zinc Yellow Overall height: 650 mm Usable height: 500 mm Telescopic: 600 - 1,150 mm depth Lasdedd Ewbspfx Acfof Frame profile dimensions: 45 x 45 mm angle Hole grid: 5 x 25 mm Hole diameter: 30 x 10 mm Weight: 6.52 kg / piece Our services at a glance: (Prices on request) - Assembly, installation Please note our general assembly conditions - Shelf inspection Shelf inspection according to DIN EN 15635, carried out according to the requirements of BGR 234, visual inspection for all shelf systems - Delivery with our own fleet (without unloading) Shipping costs on request!

Condition: used, 3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg Ledpfx Aezmw Snocfjaf