Used Fps 620M-Nc for sale (4,281)

Condition: new, dimensions of saw-band 3650 x 27 x 0,9 mm speed 15 - 100 m/min vice 335 mm capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330 x 260 mm capacity 45 degrees: round 260 / 200 mm capacity 45 degrees: square 250 / 180 mm capacity 45 degrees: flat 270 x 200 / 200 x 160 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170 x 170 mm total power requirement 2,2 kW weight 1.105 kg dimensions 2700 x 2300 x 1800 mm Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left) - Semiautomatic dynamic system (manual lowering of the saw band bow up to the desired position and cycle start via the push button.) - Manual or semi-automatic-dynamic cycle to cut directly without Programming. Some features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines to display the technical parameters such as: - Saw blade speed - Number of programmed and executed cuts - saw blade thickness - feed length - cutting time - ammeter - belt tension - Display of (about 100) diagnostic messages and warnings, everything in the respective user language. - Display and entry of the alarm and error messages with the possibility of display incidents that have occurred. - automatic parameter setting via control, if a new driver or Inverter is mounted. Nodpfx Akoyv Nylsuoct - Electronic inverter for continuous regulation of the belt speed of 15 up to 100 m / min. - New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. - New material supply of 600 mm with stepper motor and ball screw mounted on opposite ball bearings. - Hublauf the saw blade directly from the control panel programmable, for Adaptation to the cutting material. - Electronic band tension control. - Automatic monitoring of the cutting load by a direct on the Cylinder mounted servo valve. - The coolant sump (equipped with 2 electric pumps for lubrication and Cooling of the saw blade) is installed in the base. - Swarf drawer (can be replaced by a chip conveyor - see Optional) - Preparation for the installation of the minimum lubrication set of the saw blade (Optional), in addition to conventional standard lubrication with emulsion oil. Chip removal brush. - Machine is intended for lifting truck transport. - Bi-metal saw band for solid and profile material.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 350 mm dimensions of saw-band 4640x34,1,1 mm 355 mm sawband speed 15-115 m/min weight of the machine ca. 2800 kg Ncsdpjyv Nd Refx Akujt dimensions of the machine ca. 3050x2190x2200 mm

Condition: new, dimensions of saw-band 3650x27x0,9 mm speed 15/100 m/min capacity 90 degrees: round 280 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330x260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270x200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170x170 mm total power requirement 2,2 kW vice 340 mm weight 1240 kg dimensions 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Ncjdsyv I Syopfx Akuot Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows "CE" based MEP-50 controller and 7 "touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings; Single stroke 600 mm - repeatable to saw any length. Simple programming - Enter cutting length and quantity and press "START". - Electronic band tension control - Automatic monitoring of the cutting load by a servo-valve mounted directly on the cylinder - Rotation control of the belt with immediate stop in case of a blocked saw band Späneräumbürste and emulsion coolant pump as standard.

Condition: used, Year of construction: 1970, faceplate diameter 1400 mm swing diameter 1600 mm turning height 1500 mm Control Siemens type 840 D workpiece weight 6500 kg Slide movement vertical 1000 mm turning speeds 10-315 U/min Feed 3600 mm/min The machine was overhauled in 2009. Control: Siemens 840 D The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Njdpfxjyqvuqj Akuect Your Markus Hirsch Team

Condition: used, The ABS 325 S NC is a robust and precise addition to the category of Horizontal Mitre Cutting Bandsaws, belonging to the Auto Miter Bandsaw group by KNUTH. This high-performance production band saw features a dual column design that enhances stability and cutting accuracy. The material feed is powered by a controlled servo motor with ball screw drive, offering a remarkable positioning accuracy of ±0.2 mm. Users can easily program and manage operations via the Omron touchscreen controller, which supports up to 30 programs with 50 steps each. For added flexibility, the ABS 325 S NC includes an option for hydraulic bundle clamping, alongside a digital display for easy reading of manually set miter angles. This fully automated saw excels in applications requiring mitre cuts in solid materials, tubes, and profiles, and is designed for high durability in demanding environments. With features like a hydraulic cutting angle clamping and automatic stroke height control, this saw ensures minimal downtime. You can request a quote for the ABS 325 S NC in the category of Horizontal Mitre Cutting Bandsaws and discover why this Auto Miter Bandsaw is a perfect fit for your production needs. Ncodpfx Akeyq N Iqjujt

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm Ncjdpfx Aehlnzkekust column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: new, For technical specifications, see the PDF file. Nedpfx Aksxp H H Housct

Condition: new, For technical specifications, see the PDF file. Nedpsxp H Nnjfx Akujct

Condition: new, For technical specifications, see the PDF file. Nedpfx Akoxp H Rlsuoct

Condition: new, Bernardo GB 55 NC Vario geared pillar drilling machine Technical specifications Drilling capacity in steel 50 mm Drilling capacity in cast iron 60 mm Thread cutting max.M42 Drill chuck 1 - 13 mm / B 16 Morse taper MK 4 Spindle speed / 2 steps 50 - 316 / 316 - 2200 rpm Feed range 0.08 / 0.12 / 0.17 / 0.24 / 0.35 / 0.50 mm/rev Projection 360 mm Distance spindle / table max. 580 mm Distance spindle / base plate 1185 mm Quill stroke 225 mm180 mm Column diameter Table size / T-slot size 570 x 480 mm / 14 mm Working surface base plate 435 x 445 mm Motor power 3.0 kW Machine dimensions (W x D x H) 750 x 1020 x 2340 mm Weight approx. 630 kg Scope of delivery Sprocket chuck 1 - 13 mm / B 16 Drill chuck arbor MK 4 / B 16 Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 Motorized table stroke Coolant device Touch screen Automatic tool ejector Electromagnetic spindle feed Thread cutting device Initial filling with Shell Tellus 46 LED machine light Digital speed display Ncedpfsrivbvsx Akuot Digital drilling depth display Height-adjustable protective cover

Condition: new, For technical specifications, see the PDF file. Ncodpfx Aksxp H Hmeujt

Condition: new, For technical specifications, see the PDF file. Ncodpfx Aksxp H Idouot

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 10 cup wheels vertical edging machine + Clean 20 floculant water treatment system variable angle 0-45° glass thikness : 3 - 55 mm min. glass dimension : 100 x 100 mm max. load : 1800 kg Ncsdpfx Asymxk Hskust height of work surface : 840 mm total power : 20 Kw tank capacity 340 L forward speed : 0,4 - 5,5 m/min. total weight : 3800 kg

Condition: used, Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm control CNC, Weinig PC-Nexus Ncedpfx Akeyrtzkjuot Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table ..... The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) ..... crosscut saw ..... > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate ..... > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length stop ..... > Length 4500mm 1. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered 2. Tap and Slot Spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment range: 580 mm NC axis, stepless > Spindle speed: 2,800-4,000 rpm > Tool diameter: 380-400mm > Overrun counter, complete clamping length is countered transfer tape ..... Included for transferring the parts to longitudinal processing Separation of double parts before entering longitudinal processing. 1. Profiling spindle (synchronous and counter-rotating) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 2. Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment range 350 mm NC axis, stepless > Radial adjustment range 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Minimum tool flight circle: 140 mm > Tool flight circle max.: 232 mm 3. Profile milling unit (grooving device from above) ..... > Position: horizontally above > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial adjustment range 30 mm NC axis, stepless > Radial adjustment range 125 mm NC axis, stepless > Spindle speed: 9000 rpm > Tool flight circle max.: 130 m...

Year of construction: 2023, condition: like new (used), Binder FP 400 Laboratory Oven Year of manufacture: 2023. Like new, unused. 2-year warranty on spare parts Binder FP 400 Material Test Chamber The BINDER FP 400 material test chamber is specifically designed for demanding applications in biological, chemical, medical, and food industry laboratories. It features exceptionally precise temperature control and uniform temperature distribution throughout the entire chamber. This makes the device an ideal foundation for reproducible materials and stability testing, incubation, or developmental processes. Compared to similar test or climate chambers, it sets itself apart with high efficiency, energy savings, and user-friendly operation — greatly simplifying daily laboratory workflows. Technical features and advantages in everyday laboratory use: The advanced FP 400 technology meets the highest standards of safety, energy efficiency, and ease of operation. This material test oven allows precise control of temperature conditions across a wide range of testing and development processes—from microbiological cultivation and chemical reaction studies to stability testing of sensitive samples. Key technical specifications at a glance: Njdpeyt A Enjfx Akujct - Temperature range: approx. 5 °C above ambient up to max. 300 °C - Internal volume: 400 liters; maximum total load capacity: 90 kg (up to 35 kg per shelf) - Temporal temperature deviation: ±0.3 K; spatial temperature variation: 1 K at 70 °C, 2.5 K at 150 °C, 4.8 K at 300 °C - External dimensions: 1235 x 1025 x 765 mm (W x H x D); internal dimensions: 1000 x 800 x 510 mm (W x H x D) - Power supply: 400 V, 3 N ~, 3.4 kW, 50/60 Hz - Power consumption: 520 W (70 °C), 1200 W (150 °C), 2340 W (300 °C) - Protection class: IP 20 according to EN 60529, certified according to DIN 12880 Additional features: - Interior made of high-quality stainless steel – ensures maximum durability and exceptionally easy cleaning - Digital temperature display and intuitive operation via ergonomic control panel - Practical door lock; quiet operation; low working noise - Environmentally friendly and energy saving due to low energy consumption and advanced insulation design - Flexible interior configuration with optional shelves and drawers (up to 10 shelves can be installed) - Two inner glass doors allow quick visual inspection without affecting temperature levels - Optimized air flow ensures optimal temperature uniformity - Easy to transport and install thanks to its compact design and ergonomic handle The steam chamber has a large capacity of 498 liters, and the advanced air exchange system (16–18 exchanges per hour depending on temperature) ensures rapid stabilization of conditions. The recovery time to set parameters after a brief door opening remains minimal, even at high temperatures—crucial for frequent routine operations. Compliance with globally recognized standards DIN 12880 and EN 60529 (IP 20) guarantees safe and standards-compliant operation for daily use. This device is thus perfectly suited for quality control laboratories, industrial test applications, and academic research projects where the highest precision is required.

Condition: excellent (used), Motor-driven NC rotary table Stepless rotary table (pitch 0.001°) Attached pallet station: pallet changing table (2 pallets) Manufacturer: Rückle Type: PKTF 1200 Table size: 1200 mm x 1200 mm Total height: 660 mm Centring hole: 100 H6 mm Clamping grooves: 7 pieces Slot dimension: 22 H7 mm Njdjfk R Tdjpfx Akusct Slot distance: 160 mm The displacement is measured via a ROD 250 rotary encoder. Condition: Very good (used) Optionally with machine bed (travel = 2000 mm ) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a free specialist for SHW machine tools. Our main focus lies in the field of tool milling machines. Our services include the supply of spare parts, on-site customer service, machine overhauls and control modernization. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - control modernization

Condition: ready for operation (used), DECKEL FP 2E tool milling machine from educational institution - Travel ranges X / Y / Z 400x200x400mm - Automatic feeds & rapid traverse in X/Z axes - Spindle speed range 40 - 2000 rpm - Tool holder ISO 40 - Vertical / horizontal milling configuration - Swivelling vertical head with quill feed - Machine with sliding head / extendable Y travel - New control cabinet - Coolant system - Chip tray - Documentation Dimensions: LxWxH 1.5x1.6x1.8 meters / Weight 1500 kg Errors and omissions excepted. Ncedpfeypltajx Akust

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg Nodpfx Aeul Svlskujct The machine is fully refurbished and tested.

Condition: new, functionality: fully functional, input voltage: 400 V, tool diameter: 50 mm, spindle mount: MK 4, actuation type: electric, rotational speed (max.): 2,200 rpm, rotational speed (min.): 55 rpm, table width: 800 mm, table length: 260 mm, overall weight: 800 kg, Equipment: CE marking, rotational speed infinitely variable, The GB 55 SK NC VARIO drill press is equipped as standard with a large cross table and a 2-axis digital readout, allowing not only drilling but also precise milling operations. The automatic spindle feed and tapping function significantly enhance the capabilities of the machine. Stepless spindle speed adjustment is available within the range of 55–2200 rpm. Thanks to its robust construction and large drilling capacity, this model is well-suited for series or industrial production. The NC version features a programmable controller for setting, among other things, drilling depth, spindle speed, and automated tapping. Drilling capacity is 50 mm, tapping up to M42. Key features: - NC version with programmable controller for setting drilling depth, spindle speed, and automatic tapping, etc. - 6-range automatic spindle feed, adjustable electromagnetically including tapping function - Rigid machine construction ensures vibration-free operation - Powerful drive motor suitable for continuous operation - 2-axis digital display for high machining accuracy - Heavy-duty base plate with T-slots and integrated coolant system - Comprehensive standard equipment - Quiet machine operation thanks to hardened and ground gears - Safety covers meet latest CE standards - Automatic tool ejector - Quick tool change enabled by the automatic ejector - Electronic indicators for drilling depth and spindle speed as standard - Stepless speed adjustment Technical Specifications: - Maximum drilling capacity: 50 mm - Drilling capacity in castings: 60 mm - Maximum tapping capacity: M42 - Drill chuck capacity: 1–13 mm / B16 - Spindle taper: MK 4 - Spindle speed min.: 55 rpm - Spindle speed max.: 2200 rpm - Speed change: stepless (55–348/348–2200) Nsdpfxjytfuxe Akuoct - Drive transmission: gear - Automatic spindle feed range: 0.08 / 0.12 / 0.17 / 0.24 / 0.35 / 0.50 mm/rev - Drilling table tilt: -45° to +45° - Max. distance spindle/column: 380 mm - Max. distance spindle/table: 480 mm - Max. distance spindle/base: 1165 mm - Quill stroke: 210 mm - Column diameter: 150 mm - Table size (width): 800 mm - Table size (depth): 280 mm - Cross table travel (X x Y): 415 x 290 mm - T-slots (number, size): 14 mm - Motor power S1 100%: 3.0 kW - Voltage: 400 V - Dimensions (W x D x H): 1230 x 1240 x 2310 mm - Weight approx.: 800 kg Scope of delivery: - 2-axis ES-12H LCD digital display - Cross table - Drill chuck 1–13 mm / B16 - MK4 / B16 arbor - Reducing sleeves MK4/3, MK4/2, MK3/1 - Coolant system - Tapping mode - Electromagnetic spindle - Automatic tool ejector - LED lighting - Movable guard - Electronic indicators for drilling depth and spindle speed - Stepless spindle speed adjustment

Condition: good (used), Year of construction: 2008, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, Heidenhain TNC 124 control quill electronical hand wheel coolant device Technische Daten: Njdpfxerb A Tcj Akuoct Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: refurbished (used), Year of construction: 2019, TECHNICAL DETAILS Drilling depth: 1,400 mm Full drilling range: 40 mm Spindle speed: 670 - 3,560 rpm Center height over bed: 380 mm Center height over floor: 1,400 mm Table length: 1,200 mm Table width: 1,200 mm Cross table travel: 2 x 400 mm Center height over table: 250 – 600 mm Z-axis Feed rate: 0-7,000 mm/min W-axis - 400 mm Feed rate: 0-7,000 mm/min X-axis - 800 mm Feed rate: 0-2,000 mm/min Y-axis - 350 mm Feed rate: 0-3,000 mm/min Rapid traverse speed: 3.5 m/min Ncedpsw Ekfuefx Akujt Motor nominal speed: 8,000 rpm Motor rated output: 18.5 kW MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 40 kW Total length: 6,500 mm Total width: 3,500 mm Total height: 2,900 mm Weight: 8 t EQUIPMENT Manufacturer: Siemens Sinumerik 840 Dsl Including 1,700 l coolant system 20 solid carbide single-lip drills, diameters 6 mm to 20 mm, lengths 1,200 mm to 1,750 mm

Condition: excellent (used), Year of construction: 2010, Palmary GU20x40NC universal grinding mahcine Year: 2010 SPECIFICATIONS: Capacity Swivel over table Ø210 mm Distance between centers 400 mm Max. external grinding diameter Ø200 mm Max. load of centers 60 kgs Grinding wheel O.D. x width x I.D. Ø355 x 38 x Ø127 mm Linear velocity 33 M/s Grinding wheel - X axis Manual distance 135 mm Auto. rapid advance 25 m/min Max. stroke 185 mm Min. setting unit 0.001 mm One turn of handwheel (graduation) 2 (0.005) mm Table - Z axis Traverse speed 1.5 m/min Max. stroke 480 mm Auto. reciprocate min. stroke 8 mm Feed of one turn of handwheel (2-step) 20 mm (2 mm) Swivel angle -3° , +12° Work spindle head Swivel angle -30° ~ +90° Center taper M.T. No. 3 Spindle speed (variable) 10~300 r.p.m. Max. load of spindle (tool holder included) 15 kgs (max. length: 100 mm) Tailstock Center taper M.T. No. 3 Stroke 20 mm Fine adjustment range ±0.03 mm Motor Wheel spindle 2.2 kW (4HP) Power Nedpfx Akjytftbsusct Total voltage 7 KVA Tank Wheel spindle lubricant tank 7 L Hydraulic tank 46 L Coolant tank 110 L Machine weight 2000 kgs Accessories/options: - grinding wheels - flanges - internal grinding spindle - Marposs activ measuring system - DRO system for 2-axis, SINO - hand tools - documentations Under power in our warehouse.

Condition: used, Mechanical pull-down NC machine vice FRIBOSA type size B Precision machine vice, grinding vice, clamp Jaw width 100 mm Jaw height 34 mm Clamping width 0 to 130 mm guideway height 40 mm guideway length 270 mm - mechanical machine vice - Clamping range via trapezoidal spindle Ncsdpfoilx Ufox Akujt - Stable base body ground on all sides - Can be clamped horizontally, vertically or laterally Dimension L x W x H 310 x 100 x 77 mm weight: 10 kg good condition

Condition: used, 2-axis removal machine, inserter, servo robot, workpiece gripper, pick-and-place machine, removal robot Removal device, handling device for presses, lathes, etc. GETECHA Type GL-20S No. 13836 Year of manufacture 10/2003 Z-axis travel 1900 mm Travel distance Y-axis 250 mm Travel speed Z-axis max. 1100 mm/sec. Travel speed Y-axis max. 227 mm/sec. infinitely variable travel speed in Y- and Z-axis via SMB servomotors - precise axis movement via linear guides - epis control system - Control panel opposite Ncsdpoharwyofx Akust - Control for conveyor belt, gripper magnets, bead breaker cylinder, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic - Mounted gripper with 3 lifting magnets, 3 pneumatic push-off cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours 25998 hrs. The system was used as an inserter/removal device on a press. Space requirement L x W x H 2900 x 1800 x 2000 mm Weight approx. 800 kg good condition

Condition: used, NC Multi-Blade - Double-Blade Saw for Light Metal MIKSITZ Year of manufacture: 1991 Circular saw, aluminium circular saw, table circular saw, mitre saw For cross-cutting and notching aluminium profiles Saw blade travel: 500 mm Max. cutting height: 100 mm Saw blade speed: approx. 5000 rpm Installed saw blade diameter: 300 mm Max. saw blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz Table size: 1100 x 1100 mm Ncjdodzp Snspfx Akust Table opening: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Several saw blades can be mounted on a single work shaft with double-sided bearing - A long SK40 arbor serves as the work shaft - Belt drive between the drive motor and saw shaft - Table height adjustable via hand crank (to set cutting depth) - Fixtures and stops can be mounted on the table - Saw blade movement via ball screw spindle with servomotor - Single-axis NC control for the cutting movement, LENORD + BAUER type GEL 7541.0000 - Separate control cabinet Space requirement (L x W x H): 1800 x 1600 x 1700 mm Weight: approx. 1100 kg