Used Fritsch Cutting Table/Line for sale (32,979)

Condition: new, Year of construction: 2025, Max. cutting section mm. 280x95 / 240x125 / 340x15. Structure entirely in thick and reinforced painted steel. Solid ground anchoring system with flanged steel feet for the hole. Ergonomic two-hand safety cutting controls. Independent pneumatic adjustments to adapt to different types of work. Compressed air progressive starter in supply. Cutting speed easily adjustable via pneumatic regulator, on the control panel. CUTTING UNIT: Cutting unit with horizontal plane. Structure in thick and highly robust sheet metal. Ideal motor/blade weight balancing system. Shock absorbers at the end of the stroke. Swing with bearings. Motor anchoring with easy adjustment for perfect 90 degree cuts. Easy maintenance with easy access. Solid ground anchoring system with adjustable steel feet with perforated flange. Blade motor power HP=7.5 (5.5 kW). HM circular blade, diameter mm. 500. Cutting edges Z=108. Hole diameter mm. 35 Adjustable cutting time from 0.5 to 2 sec. Adjustable cutting speed via pneumatic regulator on control panel. Godpfx Aswk Himelxoub Upper piece locking presser with electro-pneumatic management. External speed and pressure adjustment on control panel. Intelligent presser: Automatic adaptation to wood thickness, thus significantly reducing cutting times Presser movement system via new ball bearing slides with double dust protection and automatic lubrication system. Long-lasting and easily interchangeable aluminum blade guards. The entire system is equipped with individual and independent pneumatic adjustments, external on control panel, to adapt to the different types of work to be performed.

Condition: new, Year of construction: 2025, Max. cutting section mm. 610x30 / 520x100 / 420x150 Structure completely in painted steel of large thickness and reinforced. Solid anchoring system to the ground with flanged steel feet for the hole. Two-hand safety cutting controls in ergonomic position. Independent pneumatic adjustments to adapt to the different types of processing. Progressive starter compressed air in supply. Cutting speed easily adjustable via pneumatic regulator, on the control panel. Cutting time adjustable from 0.5 to 2 sec. Cutting speed adjustable via pneumatic regulator on the control panel. CUTTING UNIT: Godpjwk Iphsfx Alxsub Cutting unit with extremely robust horizontal plane, equipped with galvanized idle rollers with capacity 600 kg, diameter 89 mm, width 500 mm. Tilting cutting movement with power transmission via a group of belts. Structure in thick and highly robust sheet metal. Ideal motor/blade weight balancing system. End-of-stroke shock absorbers. Swing with bearings. Motor anchoring with easy adjustment for perfect 90-degree cuts. Easy maintenance with easy access. Blade motor power HP = 14.8 (11 kW). HM circular blade, diameter mm. 600. Cutting edges Z = 108. Hole diameter mm. 35 Upper piece locking presser with electro-pneumatic management. External speed and pressure adjustment on the control panel. Intelligent presser: Automatic adaptation to the thickness of the wood, thus significantly reducing cutting times Presser movement system via new ball bearing slides with double dust protection and automatic lubrication system. Long-lasting and easily interchangeable aluminum blade guards. The entire system is equipped with individual and independent pneumatic adjustments, external on the control panel, to adapt to the different types of work to be performed.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1000030194, table length: 4,500 mm, table width: 3,000 mm, TECHNICAL DETAILS Table dimensions: 3000 x 4500 mm MACHINE DETAILS Supply voltage: 400 VAC Rated current at full load: 5.04 A Gujdpfexdkxiex Alxob Number of supply phases: 3 Power: 2.7 kW Frequency: 50 Hz Note: The machine will be available from 02/12/2025!

Condition: ready for operation (used), Maximum saw blade diameter: 550 mm Motor power: 5.5 kW Maximum cutting length: 5 m Discharge table with four ejectors Control via touchscreen panel with inPush software Loading table with chains Length: 7800 mm Godpfoxx Scfex Alxsub Depth: 1600 mm Weight: 1500 kg Saw blade speed: 2800 rpm Year of manufacture: 2014 CE marking

Condition: excellent (used), Meren Jonson Multi-Saw with Automation Powered roller infeed with centering Godjxm Sczspfx Alxjub Roller outfeed with side pusher Rubber crawler feed system Press rollers under the shaft for cutting short pieces Smooth feed speed adjustment Maximum cutting height: 100 mm Supported saw shaft Main motor: 75 HP (56 kW) Planer Double-sided planing (top and bottom) Working width: 610 mm Working height: 152 mm Bottom motor power: 15 kW Material removal: 12.7 mm Electrically adjustable working height Maximum feed speed: 30 m/min Automatic lubrication system Total power: 50 kW

Condition: ready for operation (used), Year of construction: 2004, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 2004990105, total width: 3,710 mm, total length: 21,000 mm, total height: 1,000 mm, workpiece length (max.): 6,000 mm, workpiece width (max.): 3,000 mm, No reserve price – guaranteed sale to the highest bidder! The machine was overhauled in 2021 (replacement of valves, suction cups, and cylinders) and has been operated for less than 300 hours since then! TECHNICAL DETAILS Maximum glass sheet size: 6 m x 3 m Gedpfx Aew Sk Axolxeub MACHINE DETAILS Control type: CNC control Dimensions & Weight Dimensions (L x W x H): 21,000 x 3,710 x 1,000 mm Total weight: 5,500 kg Input power type: Three-phase current Total operating hours since overhaul: < 300 hrs. EQUIPMENT Glass breaking table Control computer Additional computer with optimization software (optional to include) Grinding device for Low-E coatings

Condition: refurbished (used), PALLET LINE MULTIBLADE AND CROSSCUTTING MACHINE A.COSTA VOLLMER ARTIGLIO PRIMULTINI STORTI Gujdsqag T Aspfx Alxeb We also have all kind of Sawmill machines

Year of construction: 2009, condition: good (used), Linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis, short-stroke linear axis, linear motion rail guide, linear table, positioning table -Manufacturer: RK Rose Krieger, Flat short-stroke linear axis for manual adjustment -Type: unfortunately without type designation -Travel: 25 mm -Position indicator: Fiama OP3A -Number: 1x linear axis available -Dimensions: 315/135/H55 mm -Weight: 3.3 kg Gusdpfx Alexln T Hsxob

Condition: good (used), Year of construction: 1992, fully automatic programmable capping with additional line detection for defect capping via LUT system infeed belt 6 m Guedpsl H E Tajfx Alxeb 6 ejection stations total length 12 m The infeed belt is not running at the moment, probably because of the frequency converter.

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Gujdpfx Alew Hz T Eoxob

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm Godpfxognyglj Alxoub strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm speed: approx. 60 m/min

Year of construction: 1979, condition: good (used), strip width: 600 - 1.600 mm strip thickness: 0,4 – 2 mm edge trimming width: 5 - 60 mm speed: approx. 60 m/min Gedpegrug Rofx Alxeub

Condition: ready for operation (used), Numeriek gestuurd Japanse elektronica werkt betrouwbaar, 720 mm snijbreedte, zeer stabiel en zwaar gebouwd (1400 kg), kogelomloop spindel voor spelingsvrij instellen van het zadel. Manual en extra mes ingegrepen. Prijs “as is” geladen op uw transport, excl. eventuele gecertificeerde verpakkingskosten. Gujdpfxew R En Hj Alxsb

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, mobile circular saw for cutting bricks with extraction Gjdpfxov Ivx To Alxjub

Condition: new, Year of construction: 2026, The CNC plasma burner with a water table is a device designed for shape cutting of elements from a sheet of metal (in any shape). This machine is characterized by extreme simplicity and ease of use. Our CNC cutter guarantees repeatability and high cutting accuracy (0.1 mm), thanks to which burnt shapes can be transferred directly to the next stage of production. Gjdpfx Asg Nknyjlxjub The water table ensures low consumption of consumables, raw materials and low gas emissions. No need to use fume and flue gas extraction. Why is it worth it? water table no need to use smoke and fumes extraction small size of the machine allows it to be placed anywhere THC voltage height adjuster precise setting of the torch a very precise cut requiring no further processing plate detection system convenient control panel intuitive machine operation can cut and gouge steel machine training at the buyer's/seller's premises a library of standard geometric shapes Characteristics and equipment Workspace 1500 x 3000 Y axis range 140 mm (clearance) The use of a rigid and stable structure Water Table Voltage height regulator Torch height adjustment system Torch height and stabilization sensor FastCAM program - in Polish with a license USB port and internal and external memory Friendly user interface - simple operation even for people who have never worked in programs like FastCAM Import of drawings in *.txt format from any type of program (e.g. AutoCAD, SolidWorks, etc.) MAKRO – a library of standard geometric shapes. This allows you to create figures without having to draw. NESTING – automatic arrangement of elements on the sheet DEMO - Shows the work cycle (path) without turning on the plasma or oxygen source The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Gujdpfsduacnox Alxeb -Chuck size: Ø 250 mm -hard: interchangeable jaws -Bayonet short cone flange: cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm -Throughout: Ø 70 mm -Weight: 28 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Manufacturer: FD, three-jaw chuck mount SK40 Guodpfog Td Erjx Alxob -Chuck size: Ø 85 mm -Passage: Ø 16 mm -Weight: 2.3 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm Guodpfxod Itchs Alxjb -Passage: Ø 83 mm -Rezess: Ø 210 mm -Weight: 17.3 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck Guodped It H Ejfx Alxeb -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Weight: 18.5 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 70 mm Guodpfxsd Iuxyj Alxjb -Weight: 27.5 kg

Condition: used, Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Throughout: Ø 60 mm -Weight: 14.5 kg Gujdpjd I Ucysfx Alxeb

Year of construction: 2008, condition: good (used), Linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis, short-stroke linear axis, linear motion rail guide, linear table, positioning table -Manufacturer: RK Rose Krieger, positioning table flat short-stroke linear axis for manual adjustment Godpfx Alsxln N Ijxeub -Type: RK C 80/194 -Travel: 50 mm -Number: 6x linear axis available -Price: per piece -Dimensions: 305/80/H45 mm -Weight: 1.6 kg/piece

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -Short taper: 5 -Through hole: Ø 42 mm Gedpfsd R Excsx Alxeub -Weight: 8.7 kg -Scope of delivery according to pictures

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Gusdpfx Aled R Exdjxjb -DH: 200x3-III -TGL: 30-2332 -Chuck size: Ø 200 mm -Weight: 16.7 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm Gusdpfx Aljd It H Soxeb -Throughout: Ø 80 mm -Weight: 25.8 kg