Used Gemac Measurement Data Acquisition Device for sale (28,006)

Condition: new, BALLUFF BTL5-P1-M0400-P-SA225-KA00,5 Micropulse transducer Iaodpjzcgktjfx Anwou condition: new

Condition: used, length 800 mm width 600 mm Isdezcgfwopfx Anwjau height 600 mm weight 410 kg

Condition: used, centre height 160 mm Iodezcgb Sspfx Anwoau chucking diameter 200 mm hollow 54 mm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, 3D Coordinate Measuring Machine | Brand: MAUSER/ZEISS | Type: KMZ-G 602520 | Year of manufacture: 1988/2003 Optionally available with an air-conditioned hall. The machine has been calibrated regularly by ZEISS. The last calibration was performed on August 7, 2025, the next calibration (recommended) is scheduled for August 2026. TECHNICAL SPECIFICATIONS:: Measuring ranges (Length x Width x Height): 6.000 x 2.500 x 2.000 mm Travels: - X-axis: 6.000 mm - Y-axis: 2.500 mm - Z-axis: 2.000 mm - Length measurement uncertainty according to VDI/VDE 2617: Iodpsy Iub Sefx Anwjau U3 = (5,0 + L/250)µm, V2 = 3,5 µm - Length measurement uncertainty according to ISO 10360-2: MPE_E = (5,0 + L/250)µm - Environmental conditions for maintaining the specified accuracy: * Temperature range: 21°C +/- 3°K * Temperature fluctuation: 0,5°K/h, 1,0°K/d, 0,5°K/m - Environmental conditions for operation: * Temperature range: + 15°C up to 35°C * Humidity: 30 up to 70% General features, Equipment: - Portal measuring machine with ultra-precision guides and ball-screw drives - Second Y-axis with granite guideway and air bearing - High-resolution Zeiss scales - Positive-drive mechanisms in all three axes - Collision protection for the quill and probe head (for VAST-TK) for manual and setup modes - Safety position for crane interlock - Reference temperature compensation - Microcomputer control - Practice piece: cube, star-shaped stylus - Reference probe D = 8 mm, length: 115 mm - Reference standard D = 30 mm - includes basic software package - Load-bearing capacity: Limited only by the foundation design - Measuring system: VAST - Software: Zeiss CALYPSO - Documentation Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: new, HEIDENHAIN Length measuring system Iasdpfxozcv Tke Anweu Type: LS107-2640 Measuring length: 2640 mm Serial No.: 3608531 ID No.: 24388972 Condition: as new, in original packaging.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, paper weight (min.): 40 g/m², paper weight (max.): 300 g/m², Hunkeler RW 6 TECHNICAL DETAILS Paper weight, standard: 40–300 g/m² Isdpfxsyzppds Anweau Roll width: min. 165 mm Roll width: max. 520.7 mm Roll diameter: max. 1,370 mm Edge trim width: 8–40 mm Roll weight: max. 800 kg Speed: 10–100 m/min Note on speed: > 150 m/min from min. 200 mm roll diameter MACHINE DETAILS Nominal current: 7 A Active power: 1.1 kW Apparent power: 1.5 kVA Ambient temperature: 10 °C to 32 °C Relative humidity: 15 % to 85 % Optimal ambient temperature according to paper specification: 18 °C to 24 °C Optimal relative humidity according to paper specification: 40 % to 60 % Weight: 694 kg Hunkeler UW 6 TECHNICAL DETAILS Paper weight: 40–300 g/m² Roll width: min. 165 mm Roll width: max. 521 mm Roll diameter: max. 1,370 mm Roll weight: max. 800 kg Speed: 10–100 m/min Nominal current: 4 A Active power: 720 W Apparent power: 950 VA Ambient temperature: 10 °C to 32 °C Relative humidity: 15 % to 85 % Optimal ambient temperature according to paper specification: 18 °C to 24 °C Optimal relative humidity according to paper specification: 40 % to 60 % Weight: 648 kg Hunkeler RW 6 Vacuum Buffer TECHNICAL DETAILS Paper web width: min. 165 mm Paper web width: max. 521 mm Paper weight: 50–180 g/m² MACHINE DETAILS Ambient temperature: 10 °C to 32 °C Relative humidity: 15 % to 85 % Optimal ambient temperature according to paper specification: 18 °C to 24 °C Optimal relative humidity according to paper specification: 40 % to 60 % GENERAL EQUIPMENT Prepared for online operation with roll printer OCE Variostream 8650.

Condition: excellent (used), IM-6600 measuring system IM-6120 measuring head CMOS sensor: 6.6 MP monochrome 10.4" display LCD color monitor Field of view: φ100 x 200 mm Smallest display unit: 0.1 μm Telecentric transmitted light illumination (4-segment ring) Measuring accuracy: Wide-field measuring mode: ±5 μm High-precision measuring mode: ±2 μm Iasdpszcd A Tefx Anwou Measuring mode with large field of view: ±7 +0.02L μm Measuring mode with fixed position: ±4 +0.02L μm Table: X-axis: 100 mm Z-axis: 30 mm Load capacity: 1 kg

Condition: excellent (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Wenzel LH87 coordinate measuring machine, year of manufacture 2019. Currently available for inspection in the measuring room. Features a 6-position tool changer with scanning and rotary/swivel measuring head, and active damping in the machine bed. Complete with original Wenzel PC workstation and Quartig software with all options. New price: €110,000. Ijdpezcu Tiefx Anwjau Technical details can be found in the data sheet.

Condition: used, 1 HELLA GUTMANN MEGA MACS X diagnostic device with charging station and PANASONIC CF-D1 Toughbook Color: as shown in the pictures, according to the images and inspection Condition: used Iaedpfx Aozcmg Usnwju Location of the item: Hall 1 Payment method: prepayment by bank transfer Shipping: Self-collection only from the Hofgeismar location

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, operating pressure: 50 bar, high-pressure hose length: 1,500 mm, empty load weight: 100 kg, input voltage: 230 V, water tank capacity: 100 l, warranty duration: 12 months, We offer for sale a Pressure Washer combined with a vacuum cleaner AP 100/50M. The machine allows for the removal of residual water left on surfaces after pressure cleaning, which enables use even on floors without a drain. It is recommended for cleaning bathrooms and washrooms that need to be accessible immediately after cleaning. The AP 100/50 M is ideal for hotels and SPA centers, public facilities (stations, airports), industrial baths, restaurant kitchens, sports facilities, and many more. This is an essential machine for cleaning companies managing such premises. Condition of the machine – Very good Year of manufacture: 2014 All machines purchased from us come with a 12-month WARRANTY. Technical specification: Clean water tank: 100 l Dirty water tank: 70 l Maximum pressure: 50 bar Pump performance: 5 l/min Iaedpfxewz Nmpj Anwou Turbine power: 1800 W Pump power: 370 W Voltage: 230 V Weight: 100 kg

Condition: excellent (used), Year of construction: 2018, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 100 kg, The system was hardly used (the order was cancelled). Ijdpfx Anszb U Hajweau CMM DuraMax 5/5/5 ZEISS CNC coordinate measuring machine (CMM) with cantilever design. Maximum permissible length measuring deviation (MPE) according to ISO 10360-2:2009: - MPE_E0 (3D) = (2.4 + L/300) µm for 18 - 22 °C - MPE_E0 (3D) = (2.7 + L/250) µm for 18 - 26 °C - MPE_E0 (3D) = (2.9 + L/200) µm for 18 - 30 °C Maximum permissible scanning probe deviation (MPE) according to ISO 10360-4:2000 within the maximum permissible scanning test duration (MPT). MPE_THP = 2.9 µm within MPT_tau = 55 s. Single probe deviation form according to ISO 10360-5:2010. MPE_PFTU = 2.4 µm. Form measuring deviation according to ISO 12181:2011 (VDI/VDE 2617 Part 2.2). MPE_RONt (MZCI) = 2.4 µm.

Condition: used, Year of construction: 2017, 1 unit of RAVAGLI RAVTD1850WS wheel alignment system with various accessories Color: as shown in the pictures, based on the images and inspection Year of manufacture: 2017 Condition: used Iaodszcmdmspfx Anwju Location of the goods: Hall 2 Payment method: prepayment by bank transfer Shipping: Self-collection only from the Hofgeismar location

Condition: used, 1 HELLA GUTMANN MEGA COMPAA HG4 exhaust gas testing station with various accessories and a mobile testing unit Color: as shown in the pictures Iodpfx Aszcl T Hsnwsau Condition: used Location of the goods: Hall 1 Payment method: prepayment by bank transfer Shipping: self-collection only from the Hofgeismar location

Condition: excellent (used), Year of construction: 2018, liter capacity 200 l feed pressure max. 200 bar coolant capacity 950 l Control Siemens total power requirement 45 kW Iedozczkzopfx Anwjau weight of the machine ca. 1,9 t dimensions of the machine ca. 2,4 x 1,5 x 2,9 m

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings Iodpfxozdz S To Anweau The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Condition: new, Year of construction: 2022, functionality: fully functional, mount diameter: 38 mm, clamping range: 38 mm, 2 x Reishauer Clamping Device Base Unit Chuck FK 38 new - unused suitable for Reishauer gear grinding machine, fitting the spindle Iodpfx Aowzkcxjnweau for machines RZ 150 / RZ 160 / RZ 260 clamping diameter: 38 mm for max. speed = 3,000 rpm balanced with clamping stroke monitoring / 3-point contact monitoring and provision for additional functions clamping / air supply monitoring / clamping stroke monitoring incl. assembly and operating instructions as well as Reishauer wooden transport container Price / details on request All technical specifications subject to typing errors / mistakes. We sell exclusively to countries within the European Community.

Condition: new, HBM Piezoelectric Force Measurement Ring 1-CFW/140kN Iaodpfozcg Dasx Anweu New piezoelectric force measurement ring from HBM. The original packaging was only opened for the purpose of taking photographs. Manufacturer: HBM (Hottinger Baldwin Messtechnik) Type: 1-CFW/140kN Device type: Piezoelectric force measurement ring Measuring principle: Piezoelectric Rated force: 140 kN Available quantity: 1 piece

Condition: new, New HEIDENHAIN length measuring system. The original packaging was opened solely for the purpose of taking photographs. Iodpfx Aezcgz Eenwoau Manufacturer: HEIDENHAIN Type: LS 486C Device type: Incremental, encapsulated length measuring system Measuring length: 1020 mm Measuring method: Incremental Output signal: 1 Vpp Pitch period: 40 µm Scanning principle: Single-field scanning Protection class: IP53 Mounting type: Clamping mounting

Condition: new, New BLUM LaserControl Micro Compact tool measuring system. The original packaging was opened solely for the purpose of taking photographs. Iajdpfx Anozcgzfewsu Manufacturer: BLUM-Novotest Product series: LaserControl Micro Compact NT Type: 87.0634-014-NT-A6365/32-5/S1,6 Device type: Laser tool measuring system Design: Micro Compact NT Available quantity: 3 units

Condition: new, New HEIDENHAIN length measuring system. The original packaging was opened solely for the purpose of taking photographs. Manufacturer: HEIDENHAIN Type: LC 183 Device type: Absolute encapsulated length measuring system Measuring length: 540 mm Iodpezcgybofx Anwsau Accuracy class: 5.0 µm Measuring method: Absolute Data interface: EnDat 02 Measuring step: 10 nm Pitch: 20 µm Electrical connection: Flange box, 14-pole Mounting type: Integrated mounting strip Available quantity: 4 pieces

Condition: new, HEIDENHAIN length measuring system LC 183 – measuring length 540 mm New HEIDENHAIN length measuring system. The original packaging was only opened for taking photographs. Manufacturer: HEIDENHAIN Type: LC 183 Device type: Absolute length measuring system Measuring length: 540 mm Scanning principle: Single-field scanning Measuring method: Absolute Output signal: EnDat Mounting type: Clamping Iedpfxozcgxws Anwjau Protection class: IP53 Available quantity: 3 pieces

Condition: new, HEIDENHAIN length measuring system LC 182 – measuring length 940 mm New HEIDENHAIN length measuring system. The original packaging was only opened for the purpose of taking photographs. Manufacturer: HEIDENHAIN Type: LC 182 Device type: Absolute length measuring system Iodpfxszcgwmj Anwsau Measuring length: 940 mm Measuring step: 0.001 µm Accuracy class: ±3 µm Mounting type: Clamping Scanning principle: Single-field scanning Protection class: IP53 Supply voltage: 5 V DC ±5 % Output signal: 1 Vss

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: P20109164, measuring range X-axis: 2,000 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 900 mm, workpiece weight (max.): 2,300 kg, warranty duration: 6 months, total height: 3,328 mm, total width: 1,965 mm, total length: 3,300 mm, overall weight: 5,600 kg, Machine parameters The machine features a granite worktable and axes mounted on air bearings. Measuring range of individual axes X-axis: 2000 mm; Y-axis: 1500 mm; Z-axis: 900 mm Machine dimensions Length: 3300 mm; Width: 1965 mm; Height: 3328 mm Iajdezdnqpjpfx Anwju Weight: Machine: 5600 kg, max. weight of measured part: 2300 kg Sensing system RENISHAW PH10 sensing head RENISHAW TP20 measuring probe – Alternatively, the machine can be equipped with a Kreon laser scanning head or other components. Software and accessories With the sale of the machine, we will provide an up-to-date license for the Metrolog software and, if necessary, other accessories, according to the customer's additional requirements.

Condition: good (used), functionality: fully functional, For sale is a high-quality set of original probe heads and probe changing systems from the renowned manufacturer Renishaw. These components come from a modernization project and are ideal for expanding or as replacement parts for your coordinate measuring machine. Scope of delivery & details on the models: - Renishaw TP200 (probe head): Compact, highly precise switching probe head with strain gauge technology. Perfect for form measurements and extremely repeatable. - Renishaw SCR200 (probe changing magazine): Automatic changing magazine for the TP200 probe head. Enables quick and protected changing of up to 6 probe modules. - Renishaw ACR3 (auto-joint changing system): Passive changing system for the automatic acceptance of probe heads and extensions. Iasdozcxx Nspfx Anwju - Renishaw MSR1 (manual changing magazine): Practical, manual storage and changing magazine for up to 6 probe modules.

Year of construction: 2025, condition: new, The universal assembly and adjustment device (HSK 63) for securely clamping all types of aggregates outside the machine—regardless of the design and machine interface. In addition to maintenance work on the aggregate, shank tools or complete tool sets can be reliably mounted and set up, whether in the aggregate itself, in tool holders, or on milling arbors—quickly, precisely, and safely. Iajdpfx Ansxmb Nweweu Thanks to compatibility with all standard machine interfaces, the device can be used flexibly, independent of the position and number of locking or support pins on the aggregate. Even tool holders with nesting turbines fit without issue. Whether it’s angle adjustments on the swivel unit, adjusting tool positions on the tracing aggregate, or tool changes on a multi-spindle drilling head—our assembly and adjustment device is THE essential tool for every workshop with a CNC machine. - Simple handling of aggregates of various designs - Suitable for all common machine interfaces - Safe clamping and alignment of tools - Universal use in assembly, service, and production - Robust construction for permanent use Availability: immediately from stock Warehouse location: Flörsheim