Used Gildemeister As 16 / 08 for sale (23,867)

Condition: used, Year of construction: 2006, Technical details: turning diameter over bed: 500 mm turning dia. over face-slide: 290 mm turning length: 850 mm centre distance: 850 mm longitudinal traverse (z-axis): 900 mm facing movement (x-axis): 260 mm control: Manuaplus 4110 revolution per minute: 10 - 3000 / 2x seples U/min max. torque on the spindle: 920 Nm spindle bore: 70 mm facing movement (x-axis): 8 m/min. longitudinal traverse (z-axis): 10 m/min. operating hours - idle run: ca. 34.600 h tailstock taper ISO: MK 5 tailstock quill stroke: 180 mm total power requirement: 24 kVA Weight approx.: 5,2 t dimension machine xH: 2,2 x 3,2 x 1,9 m Multifix steel holder size C 3-jaw chuck Ø 250mm chip tray manual hour counter live center in tailstock Operation control panel and monitor Accessories: 4-jaw chuck Ø 250mm with internal jaws various chuck keys Machine lighting 8x foot plates 4x wedge lifters various pairs of jaws 1x steady rest Ø 100mm closed Bodewtct Hopfx Adiedc *

Condition: used, Technical details: Bsdpfsvc Dv Aox Adiedc jaw width: 160 mm weight of the machine approx.: 13,5 kg span width: 208 mm *

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm Bsdpfxsw S Efzj Adiodc z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: good (used), mileage: 45,500 km, power: 121 kW (164.51 HP), first registration: 09/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 6,890 mm, total width: 2,200 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,100 kg, loading space length: 4,300 mm, loading space width: 2,140 mm, loading space height: 2,210 mm, Year of construction: 2023, Equipment: ABS, EBS, air conditioning, central locking, cruise control, electric window regulation, fog lights, power assisted steering, power mirror, spoiler, tail-lift, traction control, = Additional Options and Accessories = - Automatic low beam headlights - Heated exterior mirrors - Co-driver's seat - Roof spoiler - Third brake light - Euro 6 emission standard - Driver's airbag - Remote central locking - Cruise control - Wood slat paneling - Air conditioning - LED daytime running lights - Front center armrest - Fog lights Bodpoy Tmaqefx Adijdc - Rain sensor - Sliding side door - Immobilizer - Advertising (applied as a sticker) - Partition with window = Additional Information = General Information Number of doors: 2 Cabin: single License plate: V-74-PLN Technical Information Number of cylinders: 4 Engine displacement: 2,299 cc Transmission: RENAULT, 6 gears, manual transmission Front axle: Max. axle load: 1850 kg; steered Maximum rear axle load: 2100 kg Weights Unladen weight: 2,614 kg Payload: 886 kg GVWR (Gross Vehicle Weight): 3,500 kg Functional Tail lift: D'HOLLANDIA, tailgate, 750 kg Maintenance, History, and Condition APK (Technical Inspection): valid until 09/2026 Technical condition: good Optical condition: good

Condition: ready for operation (used), Zeiss 608093 9203 ÄZ02 35/05 Path measurement 32 Prismo / Wegmessung 32 Prismo-ST 608093-9203-701, used, as good as new condition, 100% functional Bedpfoy T Dp Asx Adiodc

Condition: used, Year of construction: 2001, operating hours: 2,500 h, total length: 3,540 mm, total width: 1,500 mm, total height: 2,330 mm, Colour: Grey Weight: 8.230 kg - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 5356 - Operating hours: 2500 - Drive system: Conventional - Power [kW]: 11.0 - Press force [ton]: 160 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 200 - Tools included: Yes - Transport dimensions: 3540mm x 1500mm x 2330mm (l x w x h) - Transport weight [kg]: 8230kg Bedpfx Aey Thmxsdisdc - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2007, operating hours: 7,990 h, functionality: fully functional, turning length: 600 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, DMG GILDEMEISTER CTX 410 V3 Centrum tokarskie CNC z osią C i narzędziami napędzanymi Producent: GILDEMEISTER / DMG Model: CTX 410 V3 Rok produkcji: 2007 Miejsce Produkcji; Niemcy Sterowanie: HEIDENHAIN plus IT Opis maszyny TOKARKA CNC DMG GILDEMEISTER CTX 410 V3 w bardzo dobrym stanie technicznym i wizualnym. Maszyna wyposażona w oś C oraz narzędzia napędzane, umożliwiające wykonywanie operacji toczenia, wiercenia, frezowania oraz gwintowania w jednym zamocowaniu. Maszyna była regularnie serwisowana. Możliwość weryfikacji historii serwisowej Bdedpfjzaqmaex Adijc DMG MORI , Maszyna była objęta pakietem kompleksowej ochrony obejmujących regularna przeglądy oraz wymianę elementów eksploatacyjnych. Historia serwisowa od 2007 – 2025 zapisy w książce serwisowej oraz w systemie DMG MORI POLSKA. Tokarka kompaktowa, bardzo sztywna i dokładna, idealna do produkcji seryjnej oraz precyzyjnej obróbki detali. Maszyna posiada jedynie około 7921 godzin pracy wrzeciona, co jak na rok produkcji jest bardzo niskim przebiegiem. Możliwość sprawdzenia maszyny pod napięciem. Parametry techniczne Parametr Wartość Producent DMG GILDEMEISTER Model CTX 410 V3 Rok produkcji 2007 Parametr Wartość Sterowanie CNC HEIDENHAIN plus IT Maks. obroty wrzeciona 5000 obr./min Wrzeciono główne Uchwyt hydrauliczny 3 szczękowy 210mm Max średnica toczenia oś X: 320mm Max dł. toczenia oś Z: 600mm Oś C Tak Narzędzia napędzane Tak Typ rewolweru VDI Konik Hydrauliczny Przenośnik wiórów Tak Układ chłodzenia Tak Układ smarowania Automatyczny Zasilanie 400 V / 50 Hz Moc przyłączeniowa 44 kVA Maks. pobór prądu 64 A Godziny pracy ok. 7921 h Wyposażenie maszyny • Sterowanie HEIDENHAIN plus IT • Oś C • Narzędzia napędzane • Uchwyt hydrauliczny • Konik hydrauliczny • Przenośnik wiórów • Układ chłodzenia • Automatyczne smarowanie • Elektroniczne pokrętło ręczne • Zabudowana przestrzeń robocza • Oprawki narzędziowe w zestawie Stan techniczny Maszyna utrzymana w bardzo dobrym stanie. Wnętrze czyste, komponenty mechaniczne zadbane. Rewolwer, wrzeciono oraz osie pracują płynnie. Bardzo niski przebieg jak na maszynę z 2007 roku. Maszyna podłączona do zasilania

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Bodpfx Adoyxr T Toiedc Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: used, carrying capacity 16 weight 7,1 kg The load ring must be mounted with a block (made of high-quality weldable material weldable material 1.0577+N St. 52-3) Support stand with spacer studs 180° tiltable Ring made from high-quality material Bedsvg R Uyspfx Adiedc According to EN 1677 Unit price: € 95.00 plus VAT from 2 pieces: 10% discount from 10 pieces: 20% discount

Year of construction: 1999, condition: good (used), Kolb Double-Paddle Mixer, Model 16-17. This double-trolley mixer is used for mixing candied fruit. The machine is in perfect working order. Bodpfoy Uvx Ssx Adisdc

Condition: used, mileage: 121,454 km, power: 120 kW (163.15 HP), first registration: 02/2012, fuel type: diesel, empty load weight: 2,586 kg, maximum load weight: 914 kg, overall weight: 3,500 kg, tire size: 235/65 16C, tire condition: 90 %, axle configuration: 4x2, wheelbase: 4,450 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, total length: 3,240 mm, loading space volume: 11 m³, loading space length: 3,240 mm, loading space width: 1,760 mm, loading space height: 1,940 mm, Year of construction: 2012, operating hours: 121,454 h, front tire size: 235/65 16C, rear tire size: 235/65 16C, Equipment: ABS, airbag, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, trailer coupling, truck registration, Vehicle number for inquiries: 81101 Mercedes-Benz, Sprinter * Year of manufacture: 2012 * ABS, Anti-lock Braking System * Trailer coupling * ESP (Electronic Stability Program) * Power windows * Particle filter * Power steering * Immobilizer * Sliding door, right side * On-board computer * Double cab < 7.5 tonnes * Radio/CD player * Airbag * Electric windows and mirrors * Remote central locking * MP3 interface * Transmission type: Manual * Suspension: Leaf spring * Gross vehicle weight: 3,500 kg * Unladen weight: 2,586 kg * Payload: 914 kg * Permissible gross vehicle weight: 3,500 kg * Tire condition, 1st axle: 90% - 90% - Tire size: 235/65 R16C * Tire condition, 2nd axle: 90% - 90% - Tire size: 235/65 R16C * Wheelbase: 4,450 mm * Tire size: 235/65 R16C * Interior dimensions: L = 3,240 mm, W = 1,760 mm, H = 1,940 mm Bjdpfx Aoy Tttksdisdc * Interior volume*: 11 m³ * Pallet spaces: Disclaimer: Subject to changes, prior sale, and errors. You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering export license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading/load securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Operating hours: 68,816 h, condition: ready for operation (used), functionality: fully functional, overall weight: 5,500 kg, total length: 4,500 mm, total width: 1,950 mm, total height: 1,750 mm, torque: 263 Nm, turning diameter: 290 mm, bar diameter (max.): 72 mm, bar passage: 72 mm, chuck outer diameter: 200 mm, feed length X-axis: 212 mm, feed length Z-axis: 640 mm, quill diameter: 80 mm, quill stroke: 100 mm, rapid traverse Z-axis: 15 m/min, rapid traverse X-axis: 10 m/min, rotational speed (max.): 5,000 rpm, rotational speed (min.): 25 rpm, swing diameter over bed slide: 500 mm, swing diameter over cross slide: 290 mm, turning length: 640 mm, type of input current: three-phase, machine/vehicle number: 310142, Equipment: documentation/manual, Basic Data Manufacturer: Gildemeister Type: CTX 400 Machine No.: 310142 Year of Manufacture: Not specified, presumably early 1990s Control System: Gildemeister EPL / Grundig Bsdpfx Aoy Tx Awediodc Operating Hours: 68,816 h Weight: 5,140 kg Dimensions L x W x H: 4,527 x 1,940 x 1,730 mm Connection: 400 V / 50 Hz Power: 45 kVA Turning Data Minimum Spindle Speed: 25 rpm Maximum Spindle Speed: 5,000 rpm Maximum Torque: 210 / 263 Nm Turning Diameter: 290 mm Turning Diameter over the Way Rest: 500 mm Turning Diameter over the Facing Slide / Facing Guide Cover: 290 mm Turning Length: 640 mm Bar Diameter / Spindle Bore: 72 mm Chuck Outer Diameter: 200 mm Axes / Travels Feed Travel X-axis / Facing Travel: 212 mm Feed Travel Z-axis / Longitudinal Travel: 640 mm Rapid Traverse X-axis: 10 m/min Rapid Traverse Z-axis: 15 m/min Y-axis: Not available / leave blank Tailstock Quill Diameter: 80 mm Quill Stroke: 100 mm Quill Taper: MK 4 Maximum Quill Pressure: 800 daN Tool Holder Tool Stations: 12 Tool Holder: VDI 30 Powered Tools: Not available / do not enter C-axis: Not available / do not enter

Condition: used, Year of construction: 2007, functionality: fully functional, Technical details turning diameter 100 mm turning length 320 / 345 mm control Siemens 840 D swing diameter 145 mm spindle distance 580 mm slide I - cross travel (X1) 220 mm slide I - longitudial travel (Z1) 320 mm y-axis +/- 30 mm rapid traverse (X/Y/Z) 30/15/30 m/min slide II - cross travel (X2) 120 mm slide II - longitudial travel (Z2) 345 mm rapid traverse (X/Z) 30 m/min Travel subspindle (Z3) 380 mm vertical stroke (X3) 145 mm bar material dia. max. 36 mm rapid traverse (X/Z) 20/30 m/min Bdjdpfsy Tvn Rsx Adiec power capacity (40/100 % ED) 26/21 kW spindle turning speed range 40 - 7200 U/min total power requirement 42 kVA weight of the machine ca. 5,3 t Additional information CNC turning and milling centre with Y-axis, 2 turrets, subspindle and bar feeder. A total of over 44,000 EUR has been invested in necessary repairs and maintenance over the last 5 years by DMG MORI (replacement of the main spindle S4, ball-screws, etc.). Equipment: - SIEMENS 840 D powerline CNC control - Number of controlled axes: 9 - 2 x C-axis - Y-axis in upper turret - Pick-up device with gripper - 2 SAUTER turrets with 12 tool positions (driven), VDI 25 - Tool drive with a speed range of 30 to 6000 rpm - Coolant system with paper band filter - Chip conveyor - Collet chuck on main and subspindle - Bar loading magazine, make: IEMCA BOSS 332 E 32 L, max. bar length 3180 mm

Condition: used, mileage: 378,584 km, power: 120 kW (163.15 HP), first registration: 05/2019, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 10/2027, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,420 mm, total width: 2,000 mm, total height: 2,850 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Audio system Audio 10 (radio with CD player), automatic activation of headlights, windows for rear doors/tailgate with wiper/washer system, window in the cargo/passenger compartment: - fixed, rear, window in the cargo/passenger compartment: - fixed, front left, window in the cargo/passenger compartment: - fixed, front right, additional main key, rear door without glazing (opening angle 180 degrees), wooden floor in the cargo area, comfort lighting in the passenger/cargo area, fuel tank: enlarged, cargo area partition with sliding window, cargo area partition with window, tire pressure monitoring system, seats in the driver's cab: driver's seat comfort, special paint finish, heat-insulating glazing, two-way speakers in the front Bsdey T Akfepfx Adiodc Additional equipment: 3-button remote control for central locking, 3rd brake light, adaptive brake light, airbag on the passenger side, airbag on the driver side, hill start assist, exterior mirrors, aspherical, both, exterior mirrors mechanically adjustable from inside, both, outside temperature display, roof rack fastening rails, brake assistant, braking system with ABS+ASR, ceiling light in the cargo area, driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: breakdown management, driver assistance system: crosswind assist, windshield with antenna, generator 150 A, cup holders in the rear, cup holders in the front, seatbelt pretensioners, grab handle on the passenger side, lockable glove compartment, body/superstructure: standard van, body/superstructure: compact, communication module (LTE) for digital services, load securing/tie-down points, Mercedes-Benz emergency call system, engine 2.1 L - 120 kW CDI CAT, rear fog light, wheelbase 3200 mm, interior rearview mirror, low emission according to emission standard Euro 6, sliding door cargo/passenger compartment right, safety belt system with warning system (driver/passenger side), seat cover/upholstery: fabric, window pillar trim, interior trim in the cargo/passenger compartment: hard fiber, half-height, tie-down rails in the cargo area - side wall to roof frame, service interval display Assyst

Condition: new, Year of construction: 2006, type of input current: three-phase, total height: 800 mm, total width: 520 mm, total length: 800 mm, input voltage: 400 V, Professional Jackle Power Plasma 160A cutting machine for sale. German-made industrial equipment, suitable for a variety of metal cutting applications. Power supply: 400V, three-phase. Cutting current adjustable from 20A to 160A. The machine is in working condition. Bodpfx Aoy U Izfodiodc

Condition: used, mileage: 232,000 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 07/2022, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, Special equipment: Audio system Audio 15 (radio with color display), BlueEfficiency package, vehicle without speed control system (cruise control), rear door without glazing (opening angle 180 degrees), wooden floor in the cargo area, spare wheel holder under the end of the frame including jack, reversing camera, seats in the cab: passenger seat as a double seat, lining in the cargo/passenger compartment: plywood, lashing rails in the cargo area - side wall on the safety belt, fleece battery 92 Ah, heat-insulating glazing, two-way speakers in the front Bdedpfxjy Unv Ns Adiec Additional equipment: 3-button remote control for central locking, 3rd brake light, adaptive brake light, airbag on the passenger side, airbag on the driver side, hill-start assist, exterior mirrors, aspherical, both, exterior mirrors, mechanically adjustable from the inside, both, outside temperature display, mounting rails for roof racks, brake assist, braking system with ABS+ASR, ceiling light in the cargo area, driving assistance system: Attention Assist (fatigue detection sensor), driving assistance system: breakdown management, driving assistance system: crosswind assist, windshield with antenna, generator 150 A, cup holders in the rear, cup holders in the front, seat belt pretensioners, grab handle on the passenger side, lockable glove compartment, body/superstructure: standard van, body/superstructure: long, communication module (LTE) for digital services, fuel tank: main tank 57 liters, continuous cargo area bulkhead, load securing/lashing points, Mercedes-Benz emergency call system, engine 2.1 liters - 120 kW CDI CAT, rear fog lamp, wheelbase 3200 mm, low emissions according to emission standard Euro 6, sliding door cargo/passenger compartment on the right, safety belt system with warning system (driver/passenger side), seat cover/upholstery: fabric, trim on window pillars, trim in the cargo/passenger compartment: hard fiber, halfway up, lashing rails in the cargo area - side wall on the roof frame, service interval indicator Assyst, permissible total weight 2.80 t

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: A-200711, total length: 2,450 mm, total width: 780 mm, total height: 1,150 mm, input voltage: 220 V, A washing system for anilox rollers and sleeves is for sale. Further information can be found in the photos. Bdsdpfxoww Tzio Adioc

Condition: used, mileage: 121,454 km, power: 120 kW (163.15 HP), first registration: 02/2012, fuel type: diesel, empty load weight: 2,586 kg, maximum load weight: 914 kg, overall weight: 3,500 kg, tire size: 235/65 16C, tire condition: 90 %, axle configuration: 4x2, wheelbase: 4,450 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, total length: 3,240 mm, loading space volume: 11 m³, loading space length: 3,240 mm, loading space width: 1,760 mm, loading space height: 1,940 mm, Year of construction: 2012, operating hours: 121,454 h, front tire size: 235/65 16C, rear tire size: 235/65 16C, Equipment: ABS, airbag, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, trailer coupling, truck registration, Vehicle number for inquiries: 811012 Mercedes-Benz, Sprinter * Year of manufacture: 2012 * ABS, Anti-lock Braking System * Trailer hitch * ESP (Electronic Stability Program) * Power windows * Particle filter * Power steering * Immobilizer * Sliding door, right side * On-board computer * Double cab < 7.5 tonnes Bdjdpfx Asy Tg Riedisc * Radio CD * Airbag * Electric windows and mirrors * Central locking with remote control * MP3 interface * Transmission type: Manual * Suspension: Leaf spring * Gross vehicle weight: 3,500 kg * Unladen weight: 2,586 kg * Payload: 914 kg * Permissible total weight: 3,500 kg * Tire condition, 1st axle: 90% - 90% - Tire size: 235/65 R16C * Tire condition, 2nd axle: 90% - 90% - Tire size: 235/65 R16C * Wheelbase: 4,450 mm * Tire sizes: 235/65 R16C * Internal dimensions: L = 3,240 mm, W = 1,760 mm, H = 1,940 mm * Internal volume*: 11 m³ * Pallet spaces: Disclaimer: Subject to changes, prior sale, and errors excepted. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, mileage: 121,454 km, power: 120 kW (163.15 HP), first registration: 02/2012, fuel type: diesel, empty load weight: 2,586 kg, maximum load weight: 914 kg, overall weight: 3,500 kg, tire size: 235/65 16C, tire condition: 90 %, axle configuration: 4x2, wheelbase: 4,450 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, total length: 3,240 mm, loading space volume: 11 m³, loading space length: 3,240 mm, loading space width: 1,760 mm, loading space height: 1,940 mm, Year of construction: 2012, operating hours: 121,454 h, front tire size: 235/65 16C, rear tire size: 235/65 16C, Equipment: ABS, airbag, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, trailer coupling, truck registration, Vehicle number for inquiries: 811013 Mercedes-Benz, Sprinter * Year of manufacture: 2012 * ABS (Anti-lock Braking System) * Trailer hitch * ESP (Electronic Stability Program) * Power windows * Diesel particulate filter * Power steering * Immobilizer * Sliding door on the right * On-board computer * Radio/CD player * Airbags * Electric windows and mirrors * Remote central locking * MP3 interface * Transmission type: Manual * Suspension: Leaf spring * Gross vehicle weight: 3,500 kg * Unladen weight: 2,586 kg Bdjdpfx Adey Tg Rpoiec * Payload: 914 kg * Permissible total weight: 3,500 kg * Tire condition, 1st axle: 90% - 90% - Tire size: 235/65 R16C * Tire condition, 2nd axle: 90% - 90% - Tire size: 235/65 R16C * Wheelbase: 4,450 mm * Tire sizes: 235/65 R16C * Internal dimensions: L = 3,240 mm, W = 1,760 mm, H = 1,940 mm * Internal volume*: 11 m³ * Pallet spaces: Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering export license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading/load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained staff; we will be happy to advise you.

Condition: used, mileage: 121,454 km, power: 120 kW (163.15 HP), first registration: 02/2012, fuel type: diesel, empty load weight: 2,586 kg, maximum load weight: 914 kg, overall weight: 3,500 kg, tire size: 235/65 16C, tire condition: 90 %, axle configuration: 4x2, wheelbase: 4,450 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, total length: 3,240 mm, loading space volume: 11 m³, loading space length: 3,240 mm, loading space width: 1,760 mm, loading space height: 1,940 mm, Year of construction: 2012, operating hours: 121,454 h, front tire size: 235/65 16C, rear tire size: 235/65 16C, Equipment: ABS, airbag, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, trailer coupling, truck registration, Vehicle number for inquiries: 811011 Mercedes-Benz, Sprinter * Year of manufacture: 2012 * ABS, Anti-lock Braking System * Trailer hitch * ESP * Power windows * Particulate filter * Power steering * Immobilizer * Sliding door, right side * On-board computer * Radio/CD player * Airbag * Electric windows and mirrors * Remote central locking * MP3 interface * Transmission type: Manual * Suspension: Leaf spring * Gross vehicle weight: 3,500 kg * Unladen weight: 2,586 kg * Payload: 914 kg Bdedpfx Adsy Tg Rcjisc * Permissible gross vehicle weight: 3,500 kg * Tire condition, front axle: 90% – 90% - Tire size: 235/65 R16C * Tire condition, rear axle: 90% – 90% - Tire size: 235/65 R16C * Wheelbase: 4,450 mm * Tire sizes: 235/65 R16C * Interior dimensions: L=3,240 mm, W=1,760 mm, H=1,940 mm * Interior volume: 11 m³ * Pallet spaces: Disclaimer: Subject to changes, prior sale, and errors. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering export license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading/load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: used, mileage: 50,000 km, power: 118 kW (160.44 HP), fuel type: diesel, overall weight: 3,500 kg, maximum load weight: 2,998 kg, first registration: 01/2024, emission class: euro6, number of seats: 3, For information Bdjdpjy Dtmfefx Adisc

Condition: used, Year of construction: 2007, CNC Turning-Milling Center CTX 410 - Year 2007 Heidenhain Plus IT control - 3-jaw chuck - Driven tool stations - Tailstock - Chip conveyor - Coolant tank Bodpfx Adexy Nqcoiodc

Condition: used, Year of construction: 2003, Technical details: turning diameter: 720 mm turning length: 2000 mm control: 4110 Bodey Tnaxjpfx Adiodc total power requirement: 40 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 4,5 x 2,3 x 1,9 m turning length: 2000 mm centre height: 345 mm internal taper -metric: 100 mm spindle bore: 92 mm tailstock-quill taper dia.: 100 mm turning diameter over bed: 720 mm

Condition: used, mileage: 651,784 km, power: 375 kW (509.86 HP), first registration: 03/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro5, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 960 mm, Year of construction: 2013, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, soot filter, Construction: * Flatbed with aluminum sideboards, * Dimensions: approx. 6,500mm x 2,480mm x 960mm, Crane: * Atlas crane model 186.3, year of manufacture 2014, * 2-point outrigger system, * Elevated stand, * Slewing servo Reach/Lifting Capacity: * 5.9 m = 3,200 kg, * 8.5 m = 2,120 kg, * 11.2 m = 1,600 kg, Equipment: * L ClassicSpace, * Suspension: Air / Air (full air suspension), * Steerable trailing axle, liftable, * Axle load front axle 8.0 t, * Trailer hitch with standard and DuoMatic braking connection, * 12-speed transmission - Type: G 281-12, * Fuel tank: 630 liters, aluminum, * Side windows rear left/right, * Seats in the cab: Comfort driver's seat with massage function, * External sun visor, * Manual lifting roof (steel), * Air conditioning, * Auxiliary heater (water) Technology: * Audio system: CD radio comfort (Bluetooth), * Fleetboard preparation, * CB radio, * Cooler box / refrigerator, Safety/Environment: * Retarder, * Differential lock rear axle, * Bi-Xenon headlights, * Emission standard EURO 5, Other: * Engine 12.8 liters - 375 kW R6 diesel (OM 471), * Maintained by Mercedes Benz service (11 service entries), last one in 09/2022 at 623,723 km, * Service brake renewed in 2022, Bdedpfx Adevcgqcjioc * Payload 10,800 kg according to registration certificate, * Permissible total weight 26.00 t, A stone clamp can be purchased for an additional charge. Since 1972, your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near the Bremen motorway interchange. Behnke Commercial Vehicle Center always has approximately 200 vehicles from the areas of vans, commercial vehicles, and construction machinery in stock! We offer you attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! We are happy to accept your commercial vehicle/construction machine in trade. If a new TÜV (technical inspection) is desired, we will gladly provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. The delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the Internet, price tags, and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may need to be checked separately. Subject to errors and prior sale.

Condition: used, Year of construction: 2003, turning diameter 210 mm turning length 580 mm control 840 D Siemens centre height 190 mm turning diameter over bed 330 mm turning dia. over face-slide 260 mm turning speed range - main spindle max. 4.000 min/-1 power capacity - main spindel 10 / 7,5 kW max. Torque 115 / 86 Nm spindle bore 68,5 mm max. usable bar diameter 51 mm C - Axis 0,001 ° travel -x axis 185 mm travel -z axis 455 mm number of toolpositions 12 pos. tool taper VDI 30 Driven Tool Stations: 6 pos. tailstock adjustment 400 mm intake pressure max. 4.000 N rapid traverse X: 20 / Z: 30 m/min Feed force ( X / Y / Z ) 4,5 kN Bjdpfx Ajtqmmuodiedc total power requirement 21 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 8,0 x 2,2 x 2,0 m CNC Turning- and Milling Center GILDEMEISTER - CTX 310 V3 - incl. bar loading magazine IRCO Breuning - incl. 2x collet chucks - incl. 2x jaw chuck including various clamping jaws - various VDI30 rotary holders - various reducing tubes - approx. 20x collets 173E - Pressure sleeve for collets 185E (for bars up to Ø50) - 11x collets 185E