Used Gratings for sale (356)

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, 3-axle MULTIMAX PLUS low-bed semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h Legal Gross vehicle weight: 49,500 kg / 31,500 kg Fifth-wheel load: 18,000 kg Axle load: 31,500 kg / 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm King pin trailing radius (rearwards) approx.: 2,100 mm Saddle height loaded approx.: 1,205 mm Loading platform length approx.: 9,600 mm Extendable by approx.: ? Loading platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm Gross vehicle weight depending on fifth-wheel load: Yes Special permit is required for exceeding country-specific regulations. Technical Description Gooseneck: Gooseneck in SNT Design for optimized loading platform length, length approx. 3,900 mm, rear with chamfer approx. 1,000 mm x 6°. Technical fifth-wheel load: 18,000 kg. For tractor units: 4 x 2 and 6 x 2. Loading platform: Loading platform, length approx. 9,600 mm with rear chamfer approx. 900 mm x 6°. Loading platform behind the gooseneck hydraulically raisable and lowerable, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-part AXS steel ramps approx. 4,920 mm long and approx. 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Ramps can be hydraulically shifted individually by approx. 235 mm outwards and approx. 365 mm inwards. Maximum load capacity and approach angle per technical data sheet: C470319 Maximum ramp angle with lowered loading platform: 9° Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Nwodpfx Agjizu Nte Def Technical axle load: 12,000 kg Air suspension with lift/lower valve. Axle tool kit. Tyres: 235/75 R 17.5 3PMSF twin tyres. Manufacturer of our choice Load index 143/141J (144/144F) Braking system: WABCO EBS-E braking system according to EU regulations. Without connecting cable to tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" version as per EU regulations. (ASS 3) Metalizing: Complete HRM metalizing (High Resistance Metallisation) Complete steel structure shot blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Aluminium 15%). Painting 6K final treatment: Complete steel structure shot blasted after welding. 1 coat zinc-based primer, 1 coat bonding primer. Final painting with 2 coats 2K (acrylic) single-colour in RAL shades of your choice, then cavity sealing with special wax. Rims in silver. Multi-colour and special painting at extra cost. Steel construction: Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified to DIN-EN 287-1. MAG welding process to EN ISO 4063. Protective gas M21 per EN ISO 14175 Front wall of steel, plug-in, approx. 400 mm high Connection board for supply lines to the tractor unit at the height of the outer frame profile. ASPÖCK-UNIBOX at the front plug connection board with sockets 24N, 24S & 15-pin. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 If your pin configuration deviates from the ISO standard, please inform us. “Anderson” socket at the front connection board. Rema 78051-00 & Amp. 150 V. Cable for supply to electro-hydraulic unit and/or electric winch (35 mm²,

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Nedpfofyadbex Ag Dowf Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 511001M, nominal power: 160 kW (217.54 HP), Complete and fully functional Lindemann ZB 120 x 100 - 160kW Schorch drive - Voith fluid coupling - Feed steel slat conveyor - Cyrus extraction vibrator - Axle puller - Hydraulic unit - Spare grates - Hammers Nedeyizcqopfx Ag Dswf - Various wear parts

Condition: new, neu ca. 4 Monate ab Auftragse Italien 72500 € 1370.25 € 35 to 500 mm 700x350 mm 700x500 mm 600 mm 250 mm 125 mm/s 43 mm/s 9 mm/s 68 mm/s 4 kW 1100 mm 1400 mm 2300 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Nsdpfx Aoynndleg Dowf Lateral fixed protrection grates CE certification following "IV enclosure" OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns

Condition: new, neu ca. 4 Monate ab Auftragse Italien 138000 € 2608.2 € 170 to 500 mm 870x500 mm 1000x600 mm 600 mm 300 mm 110 mm/s 42 mm/s 7 mm/s 70 mm/s 19 kW 1500 mm 1950 mm 2650 mm 4 guides for the slide Nwodpfxsynmx Uj Ag Djf T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following "IV enclosure" OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns

Condition: new, neu ca. 4 Monate ab Auftragse Italien 89700 € 1695.33 € 85 to 500 mm 700x400 mm 800x600 mm 600 mm 300 mm 105 mm/s 41 mm/s 7 mm/s 58 mm/s 7.5 kW 1200 mm 1600 mm 2500 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following "IV enclosure" OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Nodpfx Aoynmxzjg Dswf Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns

Condition: new, neu ca. 4 Monate ab Auftragse Italien 79500 € 1502.55 € 60 to 500 mm 700x350 mm 700x500 mm 600 mm 250 mm Nedpfx Agjynmxuj Dowf 120 mm/s 38 mm/s 8 mm/s 58 mm/s 5.5 kW 1100 mm 1500 mm 2350 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following "IV enclosure" OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT45001013946, empty load weight: 12,100 kg, maximum load weight: 37,900 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 01/2025, loading space length: 9,200 mm, loading space width: 2,480 mm, loading space height: 3,200 mm, total length: 13,750 mm, total width: 2,550 mm, total height: 4,070 mm, suspension: air, tire size: 205/65 R 17,5 ", maximum speed: 90 km/h, color: blue, Year of construction: 2024, Equipment: tail-lift, The images shown are archive photos; the vehicle may still be in use! Jumbo Low Loader Chassis for construction machinery transport up to 36,000 kg and a maximum external machine width of 2,500 mm. Fifth wheel plate with replaceable 2" king pin. Rear slope approximately 1,500 mm long at 7°. Ramp shaft closed at top with steel/checker plate. Trailer B-dimension: 12,000 mm Free rear swing radius approx.: 2,350 mm Spare wheel carrier with 1 spare wheel Plastic toolbox In the low-bed: Omega rail laterally below the outer frame as a lashing bar for tarpaulin and spacer holders for lashing pins, not within the wheel area. Lashing Points: Gooseneck: - 5 pairs of lashing points recessed in outer frame, each rated at 5 t - 2 pairs of lashing pins recessed on top and side of outer frame, each rated at 10 t Low-bed: - 7 pairs of lashing pins recessed on top and side of outer frame, each rated at 10 t - 9 pairs of lashing points recessed in outer frame, each rated at 5 t - 3 pairs of additional folding lashing points recessed in the low-bed floor, each 10 t (1x before the drop, 1x in front of the 1st axle, 1x behind the 3rd axle) Axles & Suspension: - Drum brake axles - Last 2 axles self-steering - Air suspension with lift & lower valve + auto-reset function - Raise & lower function with quick release Wheels and Tires: - 205 / 65 R 17.5 for 8,000 kg axle load technical max. at 90 km/h - Steel rims twin arrangement Brake System: - 2-line air brake system - Spring-loaded parking brake - 2 non-interchangeable coupling heads at front, without connecting line Nodpfx Asylkyweg Dewf - Knorr EBS Electrics: - 2 pairs of double LED warning panels, extendable - 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front - 24 Volt, multi-chamber LED lights - Flashing side marker lights - Beacon with holder - Interior LED work light on front wall - 2 additional LED work lights at rear, switched via reversing light Floor: - Floor designed for maximum forklift axle load of 10,000 kg at minimum 300 mm tire width (note: deformation possible!) Stakes: - 3 pairs of sliding stakes, movable along entire length, with four insert sockets each; only the rear 2 zones are of equal length! - Stake positions: 1x gooseneck, 3x in low-bed Insert Slats: - 5 rows of wooden insert slats Access Ramps: - Ramp surface with "Mega Grip" serrated grating (max. forklift axle load 9,000 kg at min. 200 mm tire width) - Hydraulically operated via independent electric unit installed in stainless steel box front-right, including ramp control; additional operation via radio remote control incl. rear support operation, customer's responsibility! NATO socket on truck required, including connecting line to truck as spiral cable; connection line must NOT be connected while driving! Truck not included. - Steel ramp full width, approx. 3,300 mm long + 3-part aluminium foldable section approx. 900 mm for total ramp length 4,100 mm; if necessary, additional phenolic board max. 9 mm thick under aluminium sections for reduced ramp angle; ramp load capacity 26,000 kg, heavy-duty version; over ramp shaft steel/checker plate; ramp secured during transit with top link. Exact specification available on request!

Condition: new, functionality: fully functional, machine/vehicle number: NEW-14, empty load weight: 627 kg, maximum load weight: 2,073 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 306 170 2700 2 Rear Tipper BRAND-NEW VEHICLE Internal dimensions: 306cm x 170cm Side wall height: 30cm Loading platform height: 66cm Total weight: 2700kg Payload: 2073kg Braked tandem trailer Overrun and handbrake by KNOTT 2 x 1350kg axles with brakes Low chassis Fully welded, hot-dip galvanized steel frame Aluminium profile drop sides with tension locks Drop sides fold down and are removable on all sides 15mm thick, anti-slip, heavy-duty phenolic plywood floor Additional steel plate on wooden floor Njdpfx Asghpcaog Dewf Automatic jockey wheel with 400kg nose weight capacity 6 noise-reducing lashing rings with 800kg tensile force Reinforced 13" C-type tyres with steel valves M+S tyres Net/rope hooks on the frame 13-pin connector plug Front LED marker lights Rear lights with reversing light, fog light, and triangular reflectors Upper frame mounted on rubber supports Large rear tipping angle of 51 degrees Hand pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Without drop sides (discount) - Increased drop side height to 35cm - Black Edition (powder-coated sides and rims in black) - Integrated loading ramps 2800kg - Electric tipper operation - Battery charger - Remote control - Bluetooth remote control - Emergency hand pump for use with electric operation - Safety supports for maintenance work when vehicle is tipped - Foldable crank rear supports - Complete LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Leaf grating in various heights, also closed - Side wall extensions 30cm with tension locks - Flat tarpaulin with or without hoops - High tarpaulin 160cm or 180cm Further accessories available on request! Price plus shipping to Gera and vehicle registration document: €200 net Pictures are examples and may show optional, surchargeable equipment. Haven't found the right trailer yet? We always have 50-100 vehicles in stock and ready for immediate collection. Our workshop is open for all types of repairs from 8:00 - 17:00 on weekdays. Specialist for axle repairs, also for caravans. Large selection of rental trailers. Additionally, we offer a wide range of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or drop by in person.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total length: 800 mm, total width: 4,000 mm, total height: 900 mm, TOP workbench AT 4000 with beech worktop, mobile Stainless steel workbench AT 4000 with beech wood worktop bottom with storage grate drawer unit on the left Dimensions: 4000 x 800 x 900 mm (W x D x H) Used unit, cleaned Top sanded and newly oiled Nwodpfx Agjykifpo Dsf We have more top-quality workbenches in stock!

Condition: new, NEW PRODUCT Price plus VAT. The goods are also available in other quantities and configurations. Included in this package: 11 uprights each 220 cm high x 40 cm deep 60 shelf panels each 130 cm x 40 cm 240 shelf supports 6 diagonal braces with tensioners This results in a single row with 10 bays and 6 levels per bay, total length approx. 1306 cm. 400 meters immediately available! Manufacturer: META Clip Type: Shelving rack Condition: New Height: 220 cm Length: approx. 1 x 1306 cm Frame depth: 40 cm Design: Boltless system Shelf load: 150 kg per shelf Accessories such as: Floor anchors Connectors Load warning signs Collision protection guards Guard rails Grated shelves Back mesh panels Nedpfoyh Dttex Ag Dswf Depth beams Barrier rails and much more... Simply send us your inquiry!

Condition: excellent (used), Year of construction: 2018, Mobile loading ramps, Butt, BKV 614 6 t – used – : Nwodpexvh Hhsfx Ag Def Ex-site price: €12,500 (net) Manufacturer: Butt Model: BKV 614 Year of manufacture: 2018 Load capacity: 6,000 kg Driveway with grating With safety railings Condition: very good Available: from approx. January 2026, possibly earlier Location: Euskirchen

Condition: excellent (used), Year of construction: 2023, 2 x mobile loading ramps, Butt, BKV 1013, 10 t, front axle ramp for straight-line loading – used - : Price ex location: €14,950 (net), including loading! Manufacturer: Butt Model: BKV 1013 Year of manufacture: 2023 Load capacity: 10,000 kg Driveway with grating Total length: approx. 12,500 mm Total width: approx. 2,300 mm Track width: approx. 1,960 mm Lip width: 2,000 mm Lip length: 600 mm Length of the straight upper section: 3,200 mm Ramp height at crossover, height adjustable: 1,200–1,650 mm With guardrail Condition: very good Available: immediately Location: 58710 Menden Nwedpfoyhxktsx Ag Dof

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately available and short-term delivery vehicles, on our website. Sample of the equipment. Full equipment details available on request. Neck (Gooseneck): * Gooseneck with front corners bevelled approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of external foldable lashing rings (LC 5,000 daN) * 2 pairs of external foldable lashing rings (LC 10,000 daN) * 1 pair of internal foldable lashing rings at the central beam front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tensioning straps (LC 2,000 daN) * Grating flooring C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), treadplate flooring over the axles Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections Nwjdpfjyhkrrox Ag Djf * Hydraulic lift unit, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock automatic via reverse gear and manual activation * Air suspension with lift and lower valve Braking System: * WABCO braking system in compliance with EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single-coloured in RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver grey Accessories included: * 2-inch king pin * Galvanized steel front wall approx. 400 mm high * Grating in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating in the platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electric-hydraulic unit at the rear under the platform * Plug-in aluminium side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H). Rear galvanized insert stanchions removable. (Body length approx. 2,560 mm) * Electric winch with radio remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide roller * Bolted approx. 5 t ring for winch cable loop on the neck without deflection pulley * One galvanized toolbox integrated in the sloped gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * 7 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform * Lift axle on the front axle, controlled by TEBS E depending on actual axle load and current loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear taper approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor approx. 30 mm thick Loading area: * Loading area after the gooseneck hydraulically liftable/lowerable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of folding outward lashing rings (LC 5,000 daN) * 2 pairs of folding outward lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over the axles checker plate Nwodeyhkqzopfx Ag Dsf Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding in/out ramp sections. Hydraulic lift system, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: 235/75 R 17.5 3PMSF – Manufacturer of our choice TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final paint in 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver grey Including accessories: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating in the gooseneck taper C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in rear taper of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Non-slip sand paint on the checker plates above kingpin and loading area * Electro-hydraulic unit at the rear under the loading area * On the gooseneck: plug-in aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized drop-in stakes are removable. (Body length approx. 2,560 mm) * An electric cable winch with radio remote control, approx. 5,400 kg pulling force, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide pulley * Bolted 5 t ring for cable winch deflection on the neck without deflection pulley * One galvanized toolbox integrated in the beveled gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 7 pairs comple...

Condition: new, maximum load weight: 36,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including immediately and soon-to-be available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. - Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, with a rear taper approx. 1,000 mm x 6° - For tractors: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets - 3 kW electro-hydraulic power pack for hydraulic operations (excluding hydraulic winches). Without supply line installation on the tractor unit - Outer beams of the gooseneck with mounting holes for boltable lashing rings. First hole approx. 200 mm from the front, subsequent holes approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper part of the gooseneck’s outer beams for a boltable lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the gooseneck’s outer beams (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - Grating covering on the gooseneck and rear taper with 5 mm steel reinforcement - 2" kingpin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit, with plug (NATO-NATO) - 1 pair of detachable aluminum side boards on the gooseneck, approx. 400 mm high, anodized finish CARGO AREA: - Cargo area, approx. 9,600 mm long, with rear taper approx. 900 mm x 6° - Cargo area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - TPMS (Tire Pressure Monitoring System) according to ECE R 141 - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle with trailing steering. 3rd axle with electromagnetic reverse lock via reverse gear and manual activation - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand of our choice, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel plating for additional reinforcement, designed for point loads: on the lift bed and cargo area - Painted sand coating on the gooseneck cover plates as well as transition areas between neck and lift bed, lift bed and cargo area, and cargo area and ramps - 1 spare wheel mounting bracket under the cargo area to the right in front of the axles - Cut-outs in the outer frame of the cargo area and lift bed for attaching tie-down straps (LC 2,000 daN) - 11 pairs of recessed, fold-out lashing rings in the outer frame of the cargo area (LC 10,000 daN): 3 pairs in the lift bed outer frame, 8 pairs in the cargo area outer frame - 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 3 pairs in the lift bed, 8 pairs in the rear cargo area - Control valves for the hydraulic ramps located on the right side of the vehicle - 1 pair of foldable mechanical rear supports, single-hand operation Nwsdpjyhkqujfx Ag Dof HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a

Condition: used, Year of construction: 1993, functionality: limited functionality, nominal heat output: 500 kW (679.81 HP), heating capacity: 500 kW (679.81 HP), operating pressure: 4 bar, Equipment: type plate available, Urbas reciprocating grate heating system with primary and secondary blower, cyclone, hydraulic fuel discharge with push rod (no auger), all hydraulically operated for coarse material. Some boiler passes are welded. Complete with control unit, has been in operation until now; plant is being dismantled due to relocation. Fireclay lining in very good condition. Njdpfxoyk Sgcj Ag Djwf

Year of construction: 2018, condition: ready for operation (used), Components: control cabinets, machine body (cabin, turbines, outlet, inlet), platform with processing unit and bunker, sound insulation cabin, impact box, bucket elevator, gratings, ladder, pre-impact box, small parts, piping, cable ducts, blasting media and refill silo, compressed air connection: 1/2 inch at 4–6bar, compressed air consumption: approx. 1.5m³/h, processed according to DIN ISO 8573-1, solid particle size: 1µm, density: 1mg/m³, water content: pressure dew point 3°C, oil content: 1mg/m³, length: 11,000mm, height: 5907mm. An on-site inspection is possible. Nedpfx Asxtprteg Djwf

Condition: excellent (used), functionality: fully functional, Pomac Cyclone Installation with Pump System Nwedpfsyku Nyjx Ag Dsf Pump brand: Pomac Overall dimensions: Height 4000 mm Technical specification: - Drum screen: dimensions 1000 x 1800 mm - Collection tank: stainless steel, dimensions approx. 1270 x 1880 x 1350 mm - Circulation pumps (2 pcs): Pomac brand, made of stainless steel - Pump capacity: 35 m³/h each, pressure 4 bar Construction: - Equipped with a protective cover - The entire system is mounted on a robust steel frame - Supplied with a grated floor (platform) and access stairs The cyclone installation is an advanced liquid separation and circulation system, designed for effective process water purification or solids separation in the food industry. The use of two high-performance Pomac stainless steel pumps ensures stable flow and the required operating pressure for filtration processes. Thanks to the integrated design with platform and stairs, the unit provides safe and ergonomic service operation at elevation.

Condition: excellent (used), functionality: fully functional, Odenberg / Tomra Potato Sorting Line Brand: Odenberg / Tomra Control System: “Tomra” Touchscreen Panel Technical Specification: - Optical Sorter: Odenberg with mechanical finger ejection system - Infeed Hopper: steel construction, with side and top inlets - Conveying System: rising inclined conveyor belt, overhead feed conveyor belt - Water Section: 2 submersed conveyor belts - Feeding Section: cross-flow feed with vibrating grate and conveyor belt - Installation footprint: Total usable floor area: 10,500 x 4,750 mm Nwsdjyku I Nspfx Ag Dof Set includes platforms with slatted flooring An advanced potato sorting line based on Odenberg and Tomra optical technology, providing a complete solution for modern processing facilities. At the heart of the system is a precision optical sorter with mechanical ejection, operated by the intuitive Tomra interface, enabling rapid product selection by quality and size. A unique feature of the line are the two underwater conveyor belts, ensuring extremely gentle handling of the produce and minimizing bruising and mechanical damage.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, DTS Bend Screen – Stainless Steel Curved Sieve Brand: DTS Type: Bend screen (slot/curved screen) Year of manufacture: 2019 Overall dimensions: 700 x 1300 x 2800 mm Working width: 650 mm Intended for first-stage separation Without platform and grating floor Nwsdpjyku E Isfx Ag Dsf The DTS steel bend screen is a modern machine designed for high-performance separation of solids from liquids in industrial processes. Thanks to its 'Bend Screen' construction with a 650 mm working width, this unit is ideal as the first stage of process water treatment or raw material recovery. The machine utilizes gravitational liquid flow across the curved screening surface, providing effective solids separation without the need for mechanical drives in the filtering section.

Condition: excellent (used), functionality: fully functional, DTS Double Screw Blancher, Stainless Steel Brand: DTS Year of manufacture: 2004 Power supply: 400 V Technical specifications: - Steam-heated system - Operating pressure: 6 bar - Screw dimensions: approx. Ø 1200 x 5000 mm - Water capacity: 1x 4.41 m³ and 1x 3.39 m³ Discharge conveyor: - Steel, dimensions: 4800 x 500 mm Total footprint: 8500 x 4300 mm Machine without platform, stairs, or grating floor Njdpoyku D Defx Ag Djwf The DTS double screw blancher set is an advanced processing unit made entirely of stainless steel, designed for the thermal treatment and conveying of food raw materials, especially potatoes and root vegetables. Featuring a high-pressure (6 bar) steam heating system and large operational capacity, this set is ideally suited for blanching, steaming, or pre-processing in high-throughput production lines. The use of two independent, large-diameter screws ensures accurate retention time control for the product, resulting in consistent processing quality while minimizing the risk of mechanical damage to the raw material.

Condition: new, overall weight: 32,000 kg, axle configuration: 2 axles, loading space length: 12,300 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Wiese 2-axle stepped saddle plateau with Fassi F545 crane Mega Lowliner Chassis Welded construction with cross beams made entirely of high-quality steel Neck height = approx. 220 mm including coupling plate with all necessary chassis reinforcements and cross connections Axles 2 BPW axles with a load capacity of 10,000 kg each with 17.5" drum brakes ABS: 1 axle sensing Wheelbase: 1,810 mm Tires 8-wheel type 235/75 R17.5 Rims Aluminum rims, 10-hole, centered, ET= 122 mm Lighting system 24V lighting system in accordance with EU directives 76/756/EEC ff. with: 2x2 three-chamber LED lights 1x reversing light LED 1x LED fog light LED side marker lights Lane departure lights License plate illumination 2x 7-pin sockets + 1x 15-pin socket connected according to EU standard Floor Galvanized grating covering on drop deck Nodpen Hrtgjfx Ag Djwf Steel tear plate in the axle area Load securing Outer frame with lashing hole profile D030 mm in the slope 2x12 lashing points 8,000 daN in the outer frame 3x combi row of stanchion pockets for 80x80 mm stanchions in the drop deck Accessories 2x wheel chocks with holder Spare wheel holder Winch 2x storage box with drawer (chain storage) Surface protection Steel construction: blasted and primed Coloring Chassis/frame/floor frame: single color in RAL 3020 (traffic red) Axle hubs: single-colored in RAL 3020 (traffic red) Axles: KTL-coated black Rims: Aluminum Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional support beam 360 ° working range approx. 90 % to the front For further information please do not hesitate to contact us

Condition: new, overall weight: 32,000 kg, axle configuration: 2 axles, loading space length: 12,300 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Wiese 2-axle stepped saddle plateau with Fassi F545 crane Mega Lowliner Chassis Welded construction with cross beams made entirely of high-quality steel Neck height = approx. 220 mm including coupling plate with all necessary chassis reinforcements and cross connections Axles 2 BPW axles with a load capacity of 10,000 kg each with 17.5" drum brakes ABS: 1 axle sensing Wheelbase: 1,810 mm Tires 8-wheel type 235/75 R17.5 Rims Aluminum rims, 10-hole, centered, ET= 122 mm Lighting system Nwsdpfxot Izpyj Ag Djf 24V lighting system in accordance with EU directives 76/756/EEC ff. with: 2x2 three-chamber LED lights 1x reversing light LED 1x LED fog light LED side marker lights Lane departure lights License plate illumination 2x 7-pin sockets + 1x 15-pin socket connected according to EU standard Floor Galvanized grating covering on drop deck Steel tear plate in the axle area Load securing Outer frame with lashing hole profile D030 mm in the slope 2x12 lashing points 8,000 daN in the outer frame 3x combi row of stanchion pockets for 80x80 mm stanchions in the drop deck Accessories 2x wheel chocks with holder Spare wheel holder Winch 2x storage box with drawer (chain storage) Surface protection Steel construction: blasted and primed Coloring Chassis/frame/floor frame: single color in RAL 3020 (traffic red) Axle hubs: single-colored in RAL 3020 (traffic red) Axles: KTL-coated black Rims: Aluminum Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional support beam 360 ° working range approx. 90 % to the front For further information please do not hesitate to contact us

Condition: excellent (used), functionality: fully functional, Screen / Sorting device with Cornell tanks Nodpfx Agjykmirs Dswf Consists of: - Screen belts (2 pcs): working width: 750 mm - Roller table: working width: 1500 mm - Stainless steel tanks (2 pcs): dimensions: 1580 x 1060 x 1170 mm equipped with "Cornell" brand pumps The device is offered without platforms or grating floors. The screen / sorting device is an advanced system designed for the preliminary selection and transport of products in the food industry. The construction, based on two screen belts and a wide roller table (1500 mm), enables efficient sorting of raw material and removal of impurities or small fractions. A key element of the set are two robust stainless steel tanks, integrated with high-performance Cornell pumps, allowing operation in systems requiring hydraulic transport or intensive product washing.