Used Gse Table Scale, Scale With Ball Rollers for sale (27,130)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min Kdodpfx Ajwh Rp Eji Rjr - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Laser on: approx. 40,100 h Voltage: 400 V Frequency: 50 Hz Power: 3,200 W Kedpfeyyygksx Ai Redr

Condition: excellent (used), Year of construction: 1994, power: 5.5 kW (7.48 HP), SPINDLE MOULDER GRIGGIO T270 WITH 2-POSITION TENONING SLIDING TABLE RIGHT-HAND SIDE EXTENSION ADJUSTABLE FRONT SUPPORT BAR ADJUSTABLE SPEED FEEDING DEVICE WITH 4 ROLLERS 40 MM DIAMETER SPINDLE WITH 270 MM USEFUL LENGTH 190 MM USEFUL DEPTH OF TABLE CUP MAXIMUM SIZES OF THE TOOL ALLOWED UNDER THE WORKING TABLE: 320 X 190 MM HANGING CONTROL PANEL WITH ELECTRONIC HEIGHT PROGRAMMER 8 SPINDLE HEIGHT SETTING POSITIONS LOCKING SPINDLE LEVER WORKING TABLE SIZE: 1850 X 730 MM MAXIMUM OPENING OF FRONT ADJUSTABLE SUPPORT BAR: 330 MM Kjdpoznnx Iofx Ai Rjdr WORKING TABLE HEIGHT: 900 MM SPINDLE USEFUL LENGTH: 270 SPINDLE STROKE: 250 MM SPINDLE DIAMETER: 40 MM SPINDLE ROTATION SPEED: 3000-4500-6000-8000-10000 RPM TABLE RING DIAMETER: 115-170-220-270-350 MM MOTOR POWER: 7.5 HP 2-POSITION TENONING SLIDING TABLE – WORKING TABLE SIZE: 900X300 MM TILTING: -60° +60° STROKE: 1300 MM NET WEIGHT: 900 KG VERY GOOD CONDITION

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, cutting height (max.): 110 mm, For sale: a Forma DZ 4 - 450 multi-blade saw with four positionable saw blades equipped with lasers. Each blade is driven by its own 11 kW motor. Maximum timber thickness: 110 mm. Board length: up to 6.0 meters. Kedpfezul Dnsx Ai Rjdr The set also includes an infeed roller table and an outfeed roller conveyor with side ejectors.

Year of construction: 2020, condition: like new (used), Our Dornow potato peeling line is for sale, consisting of: Storage bunker with conveyor belt (capacity approx. 1t raw material) Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector.. Subject to request) Kdjdow R T Dijpfx Ai Ror The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, overall weight: 1,500 kg, Professional grinding table, scissor type with built-in fume and dust extraction. Used in grinding, polishing, soldering, welding and cleaning processes with hand tools. Built-in metal pre-filter, which separates coarse dust particles, metal filings and is designed to capture sparks so that they do not get into the filter (spark catcher). Electrically lifted table. Table equipped with rollers and pneumatic connections for connecting tools. New filter inserts have been installed in the extractor. Built-in table lighting. Device in very good condition. Parameters: Extraction capacity - 3000 m3/h Negative pressure - 2400 Pa Year of manufacture - 2011 Work table width - 1.90m Ksdpfx Aijv Tbaaj Rodr Work table depth - 0.80m Overall dimensions: Work table: Length - 2.10m Depth - 1.40m Height - 2.30m Extraction: Length - 1.20m Width -1.00m Height - 2.35m Total weight - 1500 kg

Condition: new, Year of construction: 2026, operating hours: 1 h, total length: 9,000 mm, total width: 3,600 mm, total height: 700 mm, construction width: 3,600 mm, table height: 700 mm, table length: 9,000 mm, BOOSTON ER-00/900 – 9.0 m WORK TABLE FOR HOUSE PREFABRICATION BOOSTON MACHINERY is a manufacturer of machines and equipment for house prefabrication plants. We produce work tables, assembly tables, rotary tables, butterfly tables, and complete production lines for the prefabrication of wooden structures. TECHNICAL DATA ➡️ Table working length: 9000 mm Other available lengths: 4.5 m / 6.0 m / 7.5 m / 9.0 m / 10.5 m / 12.0 m / 13.5 m / 15.0 m ➡️ Table working height: 700 mm ➡️ Table working width: 3600 mm – other widths can be manufactured Ksdeztpznepfx Ai Rjdr ➡️ Height range of prefabricated wall using SD-01 clamping cylinder: 200–3400 mm ➡️ Vertical locking pins: 0–240 mm, diameter 35 mm (infinitely adjustable) ➡️ Hole spacing for SD-01 clamping cylinders: 150 mm ➡️ SD-01 cylinder stroke: 160 mm ➡️ Horizontal transport of finished elements – optional: a set of pneumatically lifting rollers – 2 lines of rollers, 620 mm wide ➡️ Table type: fixed table – without drives and motors ➡️ Pneumatic power supply: 8 BAR – only for the ER-00R version equipped with pneumatically lifting transport rollers ➡️ Maximum permissible load: 100 kg/m² of finished prefabricate, with a maximum element height of 3000 mm ## ADDITIONAL OPTIONS 1. SD-01 clamping cylinders 2. Set of pneumatically lifting rollers – 2 lines of rollers 3. Removable starting strip LS-01 ## BOOSTON ER-00 The ER-00 work table is an economical and efficient workstation designed for the prefabrication of walls and other elements in wooden frame construction. The table structure consists of two work sections connected by removable internal crossbars. This solution provides convenient access to the prefabricated element and allows the workstation to be adapted to the production process. The ER-00 works with SD-01 clamping cylinders, which help maintain the proper geometry of the structure during nailing and screwing of wooden elements. The modular design also allows for later expansion of the table – e.g., from 6 m to 12 m in length. The ER-00 table can operate as a standalone workstation or be connected to other BOOSTON equipment to create a complete production line for the prefabrication of wooden walls. An ER-00R version is also available, equipped with pneumatically lifting rollers, enabling horizontal transport of finished prefabricated elements between subsequent production stations. We manufacture our machines in Poland. Manufacturer: BOOSTON MACHINERY

Year of construction: 2004, operating hours: 2,500 h, condition: ready for operation (used), functionality: fully functional, Equipment: type plate available, For sale: Newtec 2009 XB Danish multihead combination checkweigher, complete with roller table and feed belt. 9-channel scale with large hoppers—ideal for vegetable packing: • Carrots • Beetroot • Celery • Onions Kdjdoy R Rpwspfx Ai Rer • Potatoes This weigher can integrate with a clipper, raschel bagger, flow wrapper, and other packaging machinery. Equipped with two discharge belts (left/right) and a central belt specifically for a clipper/central klipper, allowing connection of up to three packaging machines simultaneously. I also offer various packing machines such as: - Overwrappers - Clippers/klippers - Flowpack machines - Raschel baggers - Wrappers For more information, call: +48 880 132 668 Check my other listings for machines for vegetable production—everything from cultivation to packaging. Visit our website at www.agritrade.pl, as well as our Facebook and TikTok. USED MACHINE LEASING AVAILABLE

Condition: good (used), Year of construction: 1991, operating hours: 49,637 h, functionality: fully functional, machine/vehicle number: 9666, ram adjustment: 64 mm, conveyor belt width: 203 mm, pressing force: 50 t, control cabinet length: 940 mm, control cabinet width: 760 mm, stroke length: 1,651 mm, input voltage: 380 V, overall weight: 9,000 kg, control voltage: 24 V, sheet thickness steel (max.): 4 mm, input frequency: 50 Hz, sheet thickness aluminum (max.): 4 mm, Technical Data Manufacturer: BRUDERER AG Model: BSTA 50 EL CNC Machine Type: CNC High-Performance Punching Machine Year of Construction: 1991 Machine Number: 9666 Press Force: 500 kN (50 t) Connected Load: 40 kW Kedpozuur Uefx Ai Rjdr Main Motor Power: 25 kW Supply Voltage: 380 V / 50 Hz Control Voltage: 24 V DC Compressed Air Connection: 6–10 bar Operating Hours: approx. 49,637 h Adjustable Stroke: 16–51 mm Mounting Space/Clamping Plate: 760 x 940 mm Main Drive: 22 kW Power Supply: 400 V / 50 Hz Table Area: 940 x 580 mm Strip Feed Height (adjustable): 50–140 mm Max. Strip Width: 203 mm Max. Material Thickness: 4 mm Dimensions of machine with BBV 202: 2390 x 1270 x 3090 mm Machine Weight: approx. 9000 kg Configuration 2 x BRUDERER BBV 202/120 DOUBLE strip feeder KOHLER leveling machine 100.180/2.500.2M, year of construction 1992 Unwinding reel / coil reel Soundproof cabin Conveyor belt for part removal Lifting and sorting device for containers Roller conveyors and stacking racks Technical documentation available Description Complete BRUDERER high-performance punching line consisting of a precision punching machine BSTA 50 EL, BRUDERER strip feeder BBV 202/120, KOHLER leveling machine, unwinding reel, soundproof cabin, and discharge and conveying equipment. The system is designed for the efficient processing of strip material in high-speed punching operations. Extensive technical documentation is available.

Year of construction: 2016, condition: ready for operation (used), A Bürkle roller coater including Bürkle LZU 800 outfeed table is available. Working width: 700mm, max. mechanical feed speed: 120m/min, nominal feed speed: 25m/min, max. workpiece height: 80mm, working height range: 880mm-920mm, outfeed table length: 4000mm, operating hours: approx. 1233h. Accessories: two original Bürkle spare rollers (sealed). Documentation available. On-site inspection possible. Kdsdextfgyopfx Ai Rer

Condition: new, Year of construction: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made of strongly ribbed cast iron – for maximum stability and durability Robust welded steel base – ensures high torsional rigidity and vibration-free operation Precision sliding table made of anodised aluminium – smooth running via high-quality ball contact system Carbide guide rails – for lasting precision and minimal maintenance Tilting cast iron saw unit with double segment guide – precise zero-point tilt for highest cutting accuracy Heavy-duty rip fence with round bar guide Equipped with adjustable eccentric clamp Integrated mitre cutting device on the sliding table – for quick and precise mitre cuts Scoring unit with powerful separate drive motor Equipped with high-quality crosscut fence – with heavy-duty telescopic stop, integrated roller for easy loading and unloading, inclined scale for comfortable reading and practical eccentric clamp for secure hold Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weights Weight (net) approx. 670 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter at saw blade guard: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Kjdpsxw N Sbofx Ai Rodr Scoring motor power: 0.65 kW Rated output (motor power): 7.0 kW Duty type (main motor): S6 Duty cycle (main motor): 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Crosscutting length: 3200 mm Saw blade tilt: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Note on max. cutting height: Independent of the scorer Saw blade diameter: 400 mm Note on saw blade diameter: Independent of the scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 9200 rpm Features Scoring unit: with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscutting fence Material roller on crosscutting fence Rip fence: with round bar guide Stops: Two professional folding stops Crosscutting shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Kedpfexz Dqmsx Ai Redr Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2000, Lg.no. 24489 Technical data: - Load capacity ( vertical ) 100 kg - Flat plate diameter 400 mm - Passage opening 60 mm - Face plate manually steplessly tiltable 0 - 135 ° - Rotation infinitely variable motorized 0.05 - 5 m/min - E. foot switch for start - stop - Table height in horizontal position without rollers approx. 750 mm - 3 jaw chucks - Drive 220 V - Space requirement approx. W 450 x H 850 x D 650 mm - Weight approx. 60 kg Kedpfxsu Uqbks Ai Rsdr

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 3,000 rpm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: HEIDENHAIN, controller model: 426, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Soraluce SP 8000 was manufactured in 2000. It features an impressive X-axis travel of 6,500 mm, Y-axis travel of 1,250 mm, and Z-axis travel of 2,000 mm. The machine is equipped with a high-torque spindle motor and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Soraluce SP 8000 universal machining centre we have for sale. Contact us for further details. • Max. feed rate: 15,000 mm/min • Guideways: Heavy-duty linear/roller guideways with linear scales Kdjdpozumgkjfx Ai Rsr • Milling head: Automatic Huré-type universal head, 2.5° x 2.5° automatic indexing on both bodies • Spindle: taper ISO 50 / SK 50 (DIN 69871); direct/gearbox-driven high-torque motor • Tool changer and magazine: ATC with 30-tool chain-type, column-mounted; supports heavy-duty tooling (weight/length per standard) • CNC control: Heidenhain iTNC 530 / TNC 640 or Siemens Sinumerik Additional equipment • Chip conveyor (longitudinal, between table and column) • Coolant system (external supply to tool/head) • Enclosure (partial/perimeter protection) Technical Specification Taper Size ISO 50

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Kjdpfx Aisq H Sqdj Rodr Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2450099150, 1 No 2019 Elumatec MGS245/00+AMS Upstroke saw with 6.7m infeed roller bed, with 7.6m outfeed roller bed – however, calibrated cutting unit to 6.8m Saw fitted with calibrated automatic measuring system for accurate cutting This machine can cut straight cuts, mitres up to 55 degrees and compound mitres. Straight cut maximum in table below. Kdsdpfx Ajzupzqoi Rjr Max Width of material cutting 455mm BUYER TO ARRANGE COLLECTION OF SAW WE CAN ASSIST WITH LOADING ONTO SUITABLE VEHICLE

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, Important note! No sales/shipments to India/USA/Canada. Payment for the machine must be made in full before loading, no partial payments or installments! HENRI HAUSER OP3, unique piece / excellent condition! (Bienne/Biel, Switzerland) Coordinate drilling machine / precision drilling machine with tool set (see photos) in very well-maintained, exceptional condition, second owner (41 years in current ownership). This quality will never be produced again! The coordinate drilling machine has the rare option of motorized table drive in the X and Y axes and potentiometers. This eliminates the need for tedious manual adjustment of individual coordinates over long distances with hand cranks. Furthermore, it has rare thermal stabilization and expansion compensation. Two heaters are provided for this purpose, which can and must be switched on separately before starting work and to maintain high accuracy and dimensions. This explains the factory-set high positioning accuracy of 0.002 mm with a resolution of 0.001 mm. What is unique is that the Hauser has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a major advantage for precise drilling and machining at depth with Wohlhaupter, spindle tools, etc. With the mentioned options and in this first-class condition, it is very rare and most likely no longer available. Those familiar with these machines, which are primarily used in the watch industry, gunsmithing / defense industry, precision engineering, material testing, and the optical industry, know the value of these masterpieces of mechanical engineering. Also ideally suited for engine construction/overhaul, technical universities and training, materials technology, special machine construction, etc. All documents, manuals, electrical diagrams, etc. are, of course, available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X-axis = 400 mm, transverse travel Y-axis = 250 mm, vertical travel Z-axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle mounting MK 2, stroke of the drilling spindle (Z-axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds continuously variable from 60 rpm to 3000 rpm Feeds: Drilling spindle carriage: 2 stages from 0.03 mm/rev to 0.06 mm/rev Connection 50 Hz 3x 380 volts, spindle motor 0.80 hp Machine dimensions: Length = 1400 mm, Width = 1250 mm, Height = 1750 mm Kdedpezuvwlofx Ai Rsr Machine weight approx. 1500 kg. Shipping (direct transport without transshipment) within the EU is possible. Price net for export within the EU. Example: Secure shipping via direct transport (without transshipment!) to France/Spain/Italy etc. up to 1700 km driving distance approx. 1100 - 1450 EUR.

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Kodozukfdjpfx Ai Rodr Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Vice Various tool holders Weight 4 t Price: EUR 5,500 plus VAT ex location

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 850 mm, total length: 3,000 mm, total width: 1,500 mm, table height: 850 mm, table width: 1,500 mm, overall weight: 800 kg, height adjustment type: mechanical, Welcome, The welding table manufacturer, ATRIBU, offers a new welding table designed for both professional industrial environments and demanding hobbyist workshops. Short Description: DIMENSIONS: Tabletop: 3000 x 1500 mm with 200 mm high side walls. Both tabletop and side walls are 15.0 mm thick. HOLE SYSTEM: Precision-milled and chamfered holes, System 28 mm, 100 x 100 mm grid, with engraved scale/grid. MATERIAL: S355 J2+N Steel (high-strength structural steel). REINFORCEMENTS: Internal ribbing (160 x 6 mm plates) spaced every 40 cm for maximum stability. TOLERANCES: Maximum deviation of 0.5 mm per meter length. Maximum angular deviation of 0.5°. LEGS: 80 x 80 x 3 mm profiles, bolted, height-adjustable with swivel feet. Height adjustment range: 85–90 cm. PRICE: The price includes the table with standard metal-profile legs (wheels are not included in the base price). Swivel castors in various load capacities are available as an option for an additional fee. Full VAT invoices are issued. Detailed Description: Our tables are manufactured from high-grade S355 J2+N steel. The use of harder structural steel significantly reduces premature hole wear and ensures maximum structural durability. All holes are precision-milled and chamfered for optimal fit and tooling quality. Side walls are also made of S355 steel and feature a double row of holes. Table flatness remains within a maximum tolerance of 0.5 mm per meter. For tables of this size, we typically achieve a flatness of 0.2 mm per meter, ensuring near-perfect surfaces. The tabletop is protected with a mill scale layer for initial corrosion resistance. Additionally, each table is treated with a professional anti-spatter agent with a corrosion inhibitor prior to shipment. [Our welding tables are not plasma nitrided.] Robust internal ribbing provides necessary rigidity, even when welding heavy or complex assemblies. We also supply a full range of professional tools and accessories. Ksdjy Atrxepfx Ai Rjdr Shipping: Affordable shipping across Europe is available (approx. 50–300 EUR depending on table dimensions). VAT Information: For private customers: Local VAT rates apply. Intra-community supply (B2B): With a valid EU VAT number, purchase at 0% VAT is possible. Custom Orders & Other Systems: Need a different size or thickness? We are happy to design and manufacture a customized solution for your requirements. Available Systems & Specifications: Hole Systems: System 28 / System 16 Tabletop Thicknesses: 8.0 mm / 12.0 mm / 15.0 mm Standard Sizes: 1200 x 800 mm 1200 x 1200 mm 1800 x 800 mm 2000 x 1000 mm 2400 x 1200 mm 3000 x 1500 mm Options: Wheels with 300 kg or 100 kg load capacity, HEX grid (additional holes), 50 x 50 mm grid. Available Accessories: Table extensions, towers, clamps, squares, bolts, accessory organizers, and more. Note: Welding tables are supplied without accessories. Please consult our catalog to select your tooling set. How to Order / Contact Us: Inquiry: Please send us an email with your requirements (size, thickness, etc.). We highly recommend requesting our comprehensive catalog, as selecting the right accessory set is essential for efficient work. Order: Once you’ve finalized your configuration, orders can be placed via email. We look forward to hearing from you! We welcome both long-term cooperation and single orders. Best regards, Team ATRIBU

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, actuation type: electric, table length: 205 mm, Equipment: CE marking, rotational speed infinitely variable, We are selling a professional and immediately ready-to-use workshop set from the Austrian premium manufacturer Felder. The set consists of the precise panel saw K 700 (year of manufacture 2010) and the matching mobile dust extraction unit AF 14. Both machines are in a well-maintained, fully functional condition and have operated flawlessly in a professional workshop environment until recently. Perfect for carpentry shops, interior design, or ambitious woodworkers who are looking for a complete solution. 1. Felder K 700 panel saw: Motor power: 5.5 kW (powerful S6-40% version) Voltage / Frequency: 400 V / 50 Hz (three-phase) Features: Smooth-running aluminum sliding table, large extension table with retractable guide rail and folding stop, solid parallel fence on round bar guide with fine adjustment, workpiece clamping device (eccentric clamp). 2. Felder AF 14 mobile dust extraction unit (included): Model: Felder AF 14 (movable on rollers) Power: Powerful motor with robust steel fan wheel Airflow: Max. 2,350 m³/h for excellent chip extraction Kdjdpfx Ajzrl A Esi Ror Convenience: Practical quick-change system for chip bags Accessories: Includes flexible extraction hose (as shown) for direct connection to the panel saw. The system is completely coordinated – connect it and start working dust-free immediately! The machines can be viewed on-site and tested while powered up after prior arrangement.

Year of construction: 2026, condition: new, ceramic ball mill ,Batch ball mill ,also called ceramic ball mill ,it is used for fine grinding of feldspar,quartz,clay,ore and so on.The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving power.It can be dry or wet.The machine can use different liner types according to production needs to meet different needs.The fineness of the grinding operation is controlled by the grinding time ceramic ball mill Working principle when ball mill working,steel balls inside drum will rotate with the drum to some height,and then steel balls fall down with materials to reach the point of grinding. Working Principle of Ceramic ball mill Kdedpfx Aievzx Auo Rsr ceramic ball mill ,Intermittent ball mill grinding operation is finished in the cylinder body. When the cylinder rotates, materials ascend to a certain height and then fall along a certain path due to the balls' gravity. Two forces are generated on the balls inside. One is the force on balls through tangent direction; the other is a opposite force in the contrast to the diameter of balls, as a result of the force generated when the balls slide down. These two forces will constitute a couple for the steel balls. The balls are squeezed between the cylinder and the adjacent steel balls, so the couple can make unequal-sized friction force. The balls will orbit along with the cylinder axis and then fall down, which can produce a strong impact force on the ores in the cylinder body and, as a result, the ores will be crushed. In conclusion, the ores in the cylinder body are mainly crushed by composite effect of peeling force, impact force and extrusion force. Ceramic ball mill also named Intermittent ball mill which adopts the wet intermittent operation, is used for fine grinding and mixing the material such as feldspar, quartz, clay ceramic raw materials. The discharging and the mud size can through through 1000 sieve pore. This machine is high milling machinery, materials should be Broken in the fineness of the state into the grinding mill to get the highest efficiency and economic benefits. The cement mill is key equipment for the grinding process of the cement clinker after the crushing process of it. It is mainly used in the cement silicate product industry. After long term design and manufacture of the cement mill, our company now has series of cement mill with various specifications to meet with different requirement from our customers. Features of Cement Mill Our company adopts suitable transmission methods according to different specifications. We have brim drive and center drive as transmission form. The cylinder adopts new type step lining to increase the grinding area. And it is easily repairable and changeable. The new designed separate-chambered structure adopts flexible lifting blade and fixed lifting blade and it is easily fixed and repaired. Technical Details We have different models and options for different requirements, please contact us for more info.

Condition: ready for operation (used), Connection voltage 380V Main motor 7.5kW Scoring unit 0.75kW Variable drive Kedpfxjy Hq N Aj Ai Redr Double roller carriage 3000mm Electric height and tilt adjustment Cutting width 1000mm, CNC controlled Clamping system AKE Saw blade diameter max. 500 mm Control panel at eye level Swiveling front table Template holder 2-axis scoring unit Table extension 840mm Angle fence PQS Standard PSV with narrow and wide hood

Condition: good (used), Year of construction: 2018, Approx. 600m conveyor system, packing line, SSI Schäfer – used Price ex works (net): only €99,500, disassembled, packaged, and loaded! Manufacturer: SSI Schäfer Year of manufacture: 2018 Type: Conveyor system Many short sections/elements Roller width mainly 70cm, element width approx. 78cm Kodezpf Nyepfx Ai Rjdr Motorized roller conveyor Belt pusher Belt conveyor Incl. curved belt conveyor from Transnorm Curve/wedge merge (roller conveyor curves) Tapered roller curve Roller switch Back-up roller conveyor Folding elements/passages Etc. Ground floor, 6 roller conveyors for goods in and out with conveyor belt drive - 1st floor, five roller conveyors to supply 80 workstations with conveyor belt drive - 1st floor, five roller conveyors to remove goods from 80 workstations with conveyor belt drive - 1st floor, used cardboard belt conveyor for removing cardboard boxes with conveyor belt drive Incl. various belt conveyor curves from Transnorm Used cardboard box sizes (L x W x H): max. 800x600x320mm, min.: 340x120x119mm, max. weight 32kg, min. 1kg The offered price includes control cabinet, control system, light barriers, transitions, etc. Not included in the price (but can be purchased for an extra charge): the 80 packing tables, 2 spirals. Condition: good Available: from approx. August 2026, or by arrangement Location: Erfurt area

Condition: used, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideal for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine no.: 3229 — Technical specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on a pallet via freight forwarder possible at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and error. Kdjdpfxsxiza Uo Ai Rjr

Condition: used, functionality: fully functional, On offer: FUTURA Krono 220 four-sided planer – 5 spindles, 220 mm The machine is used, has undergone technical inspection, is fully functional, and ready for operation. It can be started and thoroughly inspected at our company's premises before purchase. The machine's greatest advantage is its five-spindle configuration with a fifth rotating spindle that can rotate 360°, providing a wide range of possibilities for planing and profiling wooden components. Separate drive for each spindle, smooth feed speed adjustment, and pneumatic pressure on the rollers ensure stable and precise machining. Specifications: • Manufacturer: FUTURA • Model: Krono 220 • Maximum working width: 220 mm • Maximum working height: 130 mm • Number of spindles: 5 • Spindle arrangement: 4 fixed spindles and a fifth rotating spindle with a 360° range • Spindle diameter: 40 mm • Spindle motor power: 4 × 4.0 kW and 1 × 5.5 kW • Spindle drive: separate motor for each spindle • Feed motor power: 1.5 kW Kdodpfx Ajzhpg Hoi Rer • Total power: 23.0 kW • Spindle motor brakes • Planing height adjustment: electric • Planing width adjustment: manual • Adjustment of the position of vertical spindles: up-down, similar to an inverted milling machine • Lower feed roller in the work table: 1 • Toothed feed roller before the first head • Pneumatic pressure on feed rollers • Feed speed adjustment: smooth, using a variator • Feed speed range: 6–28 m/min • Equipment: complete set of working heads and a cutterhead • Working heads: 3 spiral heads and 1 four-knife head • Infeed table: 2480 × 250 mm • Table lubrication pump • Soundproof cabin • Extraction ports: Ø140 mm • Year of manufacture: 1996 • Weight: approximately 1600 kg • Overall dimensions: 462 × 160 × 156 cm (L × W × H) • Original paint • Complete documentation in Italian • Head wrenches included • Complies with CE requirements Applications: • Four-sided planing of wooden components • Profiling of components using the fifth rotating spindle • Machining of components up to 220 mm wide • Machining of components up to 130 mm high Additional information: • The photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price stated in the auction applies to export sales/intra-community supply with a VAT rate of 0%; 23% VAT must be added for domestic sales Financing and transport: • We arrange transport using the MDD fleet or through external carriers • We assist in obtaining leasing or loan financing • Delivery costs depend on the destination and the method of transporting the machine