Used Gys Other for sale (21,092)

Condition: used, Year of construction: 2006, * Doppstadt DW 2560 E-1 electric shredder / wood chipper Kdsdpfx Aieyw Exae Rer * Year of manufacture: 2006 * ??Complete repair invoice available?? * Incl. control cabinet * Incl. supports * Weight: 25,000 kg * More pictures and videos via Whatsapp * All information subject to change and prior sale reserved.

Condition: used, mileage: 33,153 km, power: 124 kW (168.59 HP), first registration: 08/1990, overall weight: 7,490 kg, fuel type: diesel, color: red, gearing type: mechanical, loading space width: 2,430 mm, loading space length: 3,000 mm, loading space height: 1,600 mm, Year of construction: 1990, total length: 7,700 mm, total width: 2,480 mm, total height: 3,000 mm, number of seats: 9, Equipment: all wheel drive, parking heater, In good condition and fully functional, with no pending repairs. +++ Vehicle is ready to drive ++ Power steering ++ 7.5 tons possible with an H-certificate +++ Recent inspection including brake fluid change, lubrication, and fuel filter replacement. In addition, the air dryer cartridge and windshield wipers will be replaced. Both starter batteries have been renewed, and the fluid levels of all components have been checked and topped up if necessary. The windshield washer system will be upgraded to an electric pump with a push-button. The exhaust system will be overhauled, with the last pipe being replaced. This 1113 runs very well and is ready to drive without any issues. 9 seats (6 seats possible with private registration as a truck), All-wheel drive 4x4, central and rear differential locks, trailer hitch with ring eye 1.5t Transfer case with off-road reduction and differential locks, Walk-in equipment box with equipment holders, Wheelbase 4200 mm +++ Maximum speed according to documents = 85 km/h, actual speed with GPS 88 km/h Interior cabin dimensions from behind the driver's seat LxWxH in mm: 1560 x 2180 x 1460 Exterior box dimensions LxWxH in mm: 3130 x 2400 x 1500 Interior box dimensions LxWxH in mm: 3050 x 2400 x 1450 GVWR is 9.0t - Changes, prior sales, and errors excepted - ?080? Kedezmqncjpfx Ai Rjdr

Condition: used, Year of construction: 2005, operating hours: 8,888 h, * Type: Paus AKR 242 * Year of manufacture: 2005 Kdsdpfxewdllae Ai Rsr * Power: 50 kW -----Internal vehicle number: 10919----Subject to errors and prior sale.

Condition: good (used), - Pneumatic Motor GAMOR - Reinforced parallelogram structure made of hard aluminum - Table mounting column - Capacity: M2-M8 - Speed: 700 RPM - Working radius max: 1900 mm – min: 200 mm - Working air pressure: max 7 bar – 840 l/min - Weight: 18 kg The welding table is not included in the sale (as shown in the pictures), only the machine, which can be mounted again on a table or similar base. Transport and loading can be organized Europe-wide upon request and at additional cost. Prices plus VAT. Inspection possible by appointment. Contact us – our team looks forward to assisting you. Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? Kdodpfxozvnhfo Ai Ror For further information or contact options, please reach us via the contact form.

Condition: used, Year of construction: 2017, operating hours: 1,331 h, Equipment: all wheel drive, JCB 9 TFT dumper from 2017 with only 1,331 operating hours! ----* Manufacturer: JCB * Type: 9 TFT * Year of manufacture: 2017 * Recorded operating hours: approx. 1,331 Kdedpjzt Uiqefx Ai Rjr * Payload: 9,000 KG * Operating weight: 4,905 KG * Good condition! * More photos + video available upon request * Price: 14,900 euros, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp All information without guarantee, errors and prior sale excepted.

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: Kdodpoxwvruofx Ai Rjr - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Year of construction: 2020, condition: like new (used), functionality: fully functional, For sale: A.Celli Nonwovens Stream In Line, manufactured in 2020 Industrial in-line winding and slitting system designed for the processing of nonwoven materials. Machine details: Kdjdpfozudfdox Ai Rjr Manufacturer: A.Celli Nonwovens S.p.A. Machine type: Stream In Line Machine version: 668 Serial number: 2020026 Year of manufacture: 2020 CE marked Country of manufacture: Italy The machine comes from an industrial nonwoven production facility and is offered as shown in the photos. The system includes the main machine structure, winding and roller assemblies, drives and associated machine components. A detailed PDF with the complete technical specification of the machine is available upon request. We will be happy to provide it to seriously interested customers. Additional photos and further information are also available upon request. Price: on request / negotiable. Please contact us for further information.

Year of construction: 2004, condition: used, functionality: unexamined, Semi-automatic flocking system Manufacturer: AIGLE Macchine srl The system is used to coat various materials. It can also be used as a painting system. In this particular case, the interior parts of car glove boxes were coated. The glove boxes were hung on a conveyor belt and first sprayed manually with glue. The boxes were then sprayed with flocking material in the individual flocking booths. The spray direction changes depending on the station. After the 4 flocking booths there are 2 cleaning booths. The blown, unbonded fibers are then reintroduced into the coating process via the flock distribution system. Similarly, the unbonded fibers from the four flocking booths are returned to the process. Ksdpfxjv Izr Ee Ai Redr Cabin dimensions: Width: 2100 mm Depth: 2300 mm Height: 3260 mm Lock door Width: approx. 880 mm Height: approx. 750 mm Productivity: 1000 - 1500 pieces in 8 hours depending on shape and materials Voltage: 400 Volt 50 Hz Installed electrical power: 26 kW Electric power supply: 480 V 60 Hz Space requirement for chain belt flocking system approx. 16 x 5 m Machine dismantled and assembled in the warehouse. The machine was operational until the last day of operation.

Condition: used, functionality: fully functional, Oil mist extraction for CNC machines, Agfa / ABSOLENT separator filter Fan power: 0.63 kW Inlet diameter: 160 mm Capacity up to 500 m3/h New main filter cartridge The Agfa / Absolent filter is one of the most efficient oil mist and oil fume filters in the world. Ksdozva Tmspfx Ai Redr It has very low maintenance requirements and can operate for several years without filter replacement, resulting in very low operating costs. Due to its design and large filter surface area, it offers both a long service life and consistently high separation efficiency. Thanks to its design, the filter can operate continuously and without interruption. The liquid collects at the bottom of the filter and can be reused.

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 2,000 kg, color: black, power: 720 kW (978.93 HP), output voltage: 400 V, output frequency: 50 Hz, continuous power (apparent): 800 kVA, Containerized Rotary UPS System Featuring Marelli Generator MJB 400 LB4 B2 & Rotabloc Flywheel Technology Model:MJB 355 MB4 B2 Rated Power: 900 kVA, 400V / 920 kVA, 440V Active Power: 720 kW Voltage: 400 V / 440 V Frequency: 50 Hz / 60 Hz Rated Current: 1155 A, 400V / 1207 A, 440V Speed: 1500 / 1800 rpm Power Factor: 0.8 Insulation Class: H Weight: 1950 kg Kdodewx H Hzjpfx Ai Ror Protection class: IP23 Bearings: 6317 C3 Lubrication: Mobil Polyrex EM Rotabloc RBT Alternator (Flywheel-Based UPS) Model Type: MJB-355 UPS Power Limitation:500 kVA Voltage Range: 400 V ±12.5% Current: 722 A Frequency: 50 Hz Speed: 1500 rpm Weight: 1950 kg Manufactured in Belgium Features & Benefits Rotary UPS – No batteries required Compact footprint with integrated cooling Ideal for grid stability and critical systems Reliable European engineering (Belgium & Italy) CE marked, ready for international use

Condition: used, mileage: 1,001 km, power: 46 kW (62.54 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 13,500 kg, empty load weight: 11,800 kg, maximum load weight: 1,700 kg, axle configuration: 4x4, number of seats: 1, first registration: 01/1979, Year of construction: 1979, operating hours: 13,655 h, front tire size: 9.00-20, driver cabin: other, wheelbase: 2,500 mm, maximum speed: 20 km/h, Equipment: additional headlights, all wheel drive, Vehicle location: Bovenden, working lights, twin tires Wheelbase: 2500 mm Approx. 13655 operating hours! Air-cooled Deutz diesel engine type F 4 L 912! High-performance double pump with total output control! Steering axle with automatic oscillation lock! Kdodpfx Aovhh Nqei Rjr Hydraulic drive by variable speed drive motor with creep speed control! Loading length approx. 7400mm! Loading width approx. 2500mm! Loading height approx. 3000mm! Bucket available at extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 55,341 km, power: 124 kW (168.59 HP), first registration: 08/1990, overall weight: 7,490 kg, fuel type: diesel, color: red, gearing type: mechanical, loading space width: 2,430 mm, loading space length: 3,000 mm, loading space height: 1,600 mm, Year of construction: 1990, total length: 7,700 mm, total width: 2,480 mm, total height: 3,000 mm, number of seats: 9, Equipment: all wheel drive, parking heater, Good condition and fully functional, no need for repairs. +++ Vehicle is roadworthy ++ Power steering ++ 7.5t possible with H-certificate +++ Fresh inspection carried out with brake fluid change, lubrication, and new fuel filters. Additionally, the air dryer cartridge and wiper blades have been replaced. Both starter batteries renewed, and fluid levels of all components checked and topped up as necessary. The front-mounted pump has been removed; the openings in the radiator grille and bumper were professionally sealed. This 1113 runs very well and is ready for immediate collection. 9 seats (private registration as a truck allows for 6 seats), All-wheel drive 4x4, center and rear-axle differential lock, towing ring 1.5t. Transfer case with off-road reduction and differential locks, Kdodpfxjy I Huwe Ai Ror walk-in equipment box with equipment mounts, Wheelbase (axle spacing) 4,200 mm +++ Maximum speed according to documents: 85 km/h, actual speed by GPS: 88 km/h Cabin interior dimensions behind the driver’s seat (LxWxH) in mm: 1560 x 2180 x 1460 Box exterior dimensions (LxWxH) in mm: 3130 x 2400 x 1500 Box interior dimensions (LxWxH) in mm: 3050 x 2400 x 1450 —Subject to change, prior sale, and errors— ?191?

Condition: used, mileage: 22,367 km, power: 90 kW (122.37 HP), first registration: 04/2002, overall weight: 3,500 kg, fuel type: diesel, color: red, gearing type: mechanical, emission class: euro3, loading space width: 1,800 mm, loading space length: 3,250 mm, loading space height: 1,870 mm, Year of construction: 2002, total length: 5,506 mm, total width: 1,998 mm, total height: 2,490 mm, number of seats: 4, Equipment: ABS, all wheel drive, parking heater, Extremely clean and like-new Fiat Ducato 2.8 JTD with Dangel all-wheel drive, differential lock, and low-range gearing. Former reconnaissance vehicle from disaster relief services, with only 22,287 original kilometers. +++ Untouched, original condition with no welding. Kdsdpfx Aieyltb De Ror Features: - 2-seater bench seat, variably mounted on airline rails with large storage compartment – approved for 4 seats - 2 built-in shelving units - Second battery with integrated charger via 220V external power supply - Power inverter - Two sliding windows in the sliding door and opposite, with curtains or roller blind on the sliding door - Small roof hatch - Auxiliary heater - Electric mirrors - ABS, airbag - Rear doors with 270° opening angle - Fog lights - Dangel 4x4 all-wheel drive with differential lock Includes technical conversion to SoKFZ (special vehicle) office vehicle with 4 seats, or as a truck – allowing full tax deductibility for businesses. Special signal devices fully functional, rotating beacon lights with faux leather covers and snap fasteners. Unladen weight: 2,694 kg GVW: 4.0 tons (can be downrated to 3.5 tons without technical modifications) Freshly serviced, including brake fluid change. Continental M+S tires, DOT 2019. Headlight adjustment has been converted from hydraulic hose system to electric actuators. Internal dimensions from partition: 3250 x 1750 x 1850 mm (LxWxH) External dimensions: 5505 x 1998 x 2490 mm (LxWxH) +++ Subject to error, change, and prior sale.

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: Kdedozu Nvzepfx Ai Rer - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Year of construction: 2005, condition: used, Serial number: MMFE 1015393 Rebuilt: 2021 by Muller Martini-8000 speed Manual feed station Number of stations: 12 Collating machine: ASAC auto set up Kodpfx Aezuw Hnji Redr Type: 3693/ 24” Self-adjusting caliper control Signature recognition system: ASIR Binding machine type: 3028 Number of binding machine clamps: 31 Touchscreen controller Milling station 2 separate roughing stations Hot-melt spine gluer with freestanding preheater Hot-melt side gluer with freestanding preheater PUR gluing system with preheater 2 Nipping stations Conveyor belt system to link Müller Martini Merit S three-knife trimmer with spare knives Overall dimensions of the setup: approximately 7,000/11,000 x 32,000 x 2,500 mm Notes: Must be professionally disassembled and loaded by the buyer Online auction of high-quality printing, finishing, bookbinding, and paper-processing machinery from a modern graphic arts production environment, including a HEIDELBERG Varimatrix 105 CS automatic die-cutting and embossing machine, a HEIDELBERG Speedmaster SM 52-5 Anicolor 5-color offset press, a BOBST BRAUSSE Bora 1050 E die-cutting machine with stripping function, 2 HEIDELBERG Stitchmaster ST450 professional brochure production lines, a HORIZON StitchLiner 6000 fully automatic saddle-stitching line, HEIDELBERG Stahl TH 66 / TH 82 and XT 94 folding machines, a MÜLLER MARTINI Bolero automated high-speed line for collating and perfect binding with PUR and hot melt, POLAR 137 XT PACE and POLAR 137 XT AT XT Plus Autotrim fully automatic cutting lines, POLAR 115 XT and 92 ED cutting machines, AGFA Avalon CTP plate setters, MÜLLER MARTINI 1571 automated collator, PALAMIDES Delta 703 bundling and strapping machines, NEOPOST DS600i inserter, the EPSON Super Color T5200 large-format printer, the TECNOMAC Evolution 76 B1 laminator, the HEIDELBERG GTO 52 with Alcolor, various HEIDELBERG sheetfed presses, stack lifts, accessories, and graphic peripherals, etc. The online auction opens Friday 14 August and closes Thursday 17 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Thursday 3 September - Thursday 10 September - Monday 14 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, mileage: 44,600 km, power: 162 kW (220.26 HP), first registration: 07/1998, overall weight: 10,500 kg, fuel type: diesel, axle configuration: 2 axles, gearing type: mechanical, Year of construction: 1998, Equipment: ABS, Manufacturer MAN Model 10.224 4x2 Autosprøjte Year 1998 Condition Very good Serial Number WMAL361117G126176 Ref. nr. 1438120 Reg. date: Last seen: 11-11-2025 Hk: 220 Km: 44600 Gearbox: Manual Diesel tank: 1 Tank liter: 100 Radio: ? Disc brake: ? ABS: ? Tire Size: 235/75R17,5 Cover% left 80 Front suspension: Springs Suspension rear: Air Toolbox: ? Hydraulic system: ? Total weight: 10500 Kg Net weight: 6450 Kg Load capacity 4050 Kg Kdedpfx Aijy Rdi Re Rsr Pump: ? Belt reel: 2

Year of construction: 1996, condition: used, machine/vehicle number: 366826, enginetype: Diesel, manufacturer: DELMAG Kdjdpfezt Uidox Ai Rer

Year of construction: 2021, condition: used, Load capacity: 2000kg, support surface per table X/Y: 1400mm/900mm, tilting angle: 100°, travel of the movable table: approx. 300mm, drive: hydraulic, control: PLC, operating modes: manual/automatic, collision avoidance in manual operation via table position and table inclination. Equipment: heavy-duty rollers, therefore movable. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1300mm, weight: 1310kg. Documentation available. Inspection possible by arrangement. Kjdjzu Sztspfx Ai Rsdr

Condition: used, color: other, Year of construction: 2004, Carrying capacity: 5 kg Lifting capacity: 5 kg Serial number: 4610/04 Equipped with an electric hoist Hoist brand: Abus Load capacity: 5 metric tons Span: 12,875 mm Kedpfxszuwtbj Ai Rjdr Single-girder construction Clear height under the bridge: 5,000 mm Power supply: 400 volts, 50 Hz Includes remote control Includes documentation and electrical schematic Radio-controlled remote Collision protection Two fixed hoisting speeds - Dual drive at the top - No rails required; the crane moves across the floor An interesting selection of overhead cranes and semi-gantry cranes from renowned brands. Brands: ABUS, Demag, and KONE Lifting capacity: 5, 10, 15, and 20 metric tons Span width: up to approximately 30 meters Years of manufacture: 1989 through 2012 Models: overhead cranes and semi-gantry cranes The lots will be loaded onto your chosen mode of transport. The price is listed for each lot. If desired, transportation can be arranged for an additional fee. View the full selection, technical specifications, and auction terms on the auction page The online auction opens Sunday 16 August and closes Friday 28 August. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 1988, Immediately available from the racing department: Kjdpfx Aiszuwgne Rjdr Hydraulic four-column press, Hymag Type HS 4 – 160 k Year of manufacture 1988 Rebuilt to meet the latest occupational safety standards in 2020 Pressing force 160 tons Table size 1500 x 850 mm Stroke 500 mm Drive power 11 kW Weight 7 tons

Condition: used, mileage: 20,000 km, power: 110 kW (149.56 HP), first registration: 05/1989, overall weight: 7,490 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2026, gearing type: mechanical, loading space width: 2,500 mm, loading space length: 3,720 mm, loading space height: 1,610 mm, Year of construction: 1989, total length: 5,950 mm, total width: 2,500 mm, total height: 2,950 mm, number of seats: 3, Equipment: all wheel drive, 1st hand – volunteer German fire brigade. Kedpfx Asxp Tagoi Redr Only 20,000 total kilometers, verifiable. In regular use as a hose truck (SW1000) until 2025. Now sold only due to internal restructuring within the fire department. TÜV inspection valid until December 2026 (inspected anew at 20,178 km, currently 20,350 km). No issues whatsoever. Extremely robust MAN-VW all-wheel drive chassis. Permanent 4x4. Leaf spring suspension. Single rear tires. Wheelbase: 3,100 mm. Original 7.49-ton 8.150 FAE model, complete with original registration documents and vehicle title, continuously registered as such until recently. Therefore, this fire truck can be driven directly with an old class 3 car driver’s license obtained before 1999. Unladen weight according to registration: 5,505 kg with the installed box body (body exterior dimensions: 3.72 m long / 2.49 m wide / 1.61 m pure box height plus roof structures). Based on experience, the bare chassis without the fire-fighting body weighs less than 4 tons. Therefore, highly attractive as a platform for building a robust expedition vehicle that, when ready for travel with practical equipment, realistically remains under the 7.49 t gross vehicle weight, perhaps even leaving some payload reserve. This example already features the newer 6-cylinder engine with 6,823 cc and 150 hp. 5-speed manual transmission with low-range and two locking differentials. 89 km/h top speed! Power steering. Tilting cab with roof hatch and 3 seats. Overall vehicle dimensions: 5.95 m long / 2.50 m wide / 2.95 m high. The roof is accessible via a ladder integrally mounted in the body. The special signaling system is still installed and functional. Tires: 10.00 R 20 (16 PR), in good condition. Two complete, good spare wheels are also available for this MAN-VW. Sale/transfer by arrangement. Small jaw-type trailer hitch, 2,000 kg max. braked trailer load or 1,500 kg unbraked. The MAN starts instantly and is ready to drive immediately. Thanks to many years of storage in a garage, this is a quality truck from a time when vehicles were still built with care. This offer is only valid for businesses or public authorities / emergency services. Subject to prior sale and errors. The stated purchase price is the final gross price = net price (differential taxation according to §25a German VAT law. Separate VAT cannot be itemized, nor will VAT be added to this purchase price).

Year of construction: 2021, condition: used, functionality: fully functional, total length: 3,900 mm, lifting height: 5,600 mm, construction height: 1,920 mm, construction width: 1,840 mm, Other Technical Condition: New Kdodpfeyafdgsx Ai Ror

Condition: good (used), Year of construction: 1995, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 32 A, cutting height (max.): 900 mm, cutting width (max.): 900 mm, Equipment: documentation/manual, lighting, motor brake, This sawmill includes: 2x clamping devices 4x vertical stops 4x leveling devices with clamps 4x log lifting arms 1x pre-cutter 1x log roller with drive 1x saw blade lubrication system 1x water lubrication system 1x electric positioning control Basic cutting length: 9.0 m Log passage: approx. 90 cm Hydraulic pump: 14 liters Motor power: 11 kW Saw blade width: 100 mm The saw was used as a secondary source of income, with approximately 500 cubic meters of timber cut per year. The friction wheel drive has been replaced with a hydraulic feed system, and the hydraulic pump has also been replaced. Kdsdpfozk Exdox Ai Rjr It has a tilting cabin and a handle heater for the fingers, which is supplied with warm hydraulic oil. The cast iron rollers were replaced about two years ago, and approximately 800 cubic meters of timber have been cut with them. Two saw bed extensions are included, one 3.0 m and one 2.0 m, for a total cutting length of 14.0 m. The saw motor was re-conditioned last year. An additional 18.5 kW electric motor is included, but has not yet been installed. Approximately 15 saw blades for hardwood and softwood are included, some of which are new. The machine runs very well, all components are fully functional, and there are no leaks in the hydraulic system. The saw can be inspected while in operation. For sale due to the purchase of a new machine.

Year of construction: 2017, operating hours: 800 h, condition: like new (used), functionality: fully functional, working width: 250 mm, For sale is a very compact and flexible dual-wave soldering system, type ATF 13/25, from the German quality manufacturer ATF. Without solder pot filling. Automation Technology GmbH (Collenberg). Very compact soldering system, can be operated in an office environment. The system does not require a compressed air connection or explosion protection. Ideal for small series production. Footprint without infeed and outfeed: 1600x850 mm Year of manufacture: 2017 Connection value: 400V/25A 14 kW Weight: 190 kg (without solder) Process width: 250 mm, maximum PCB size: 470 x 250 mm. With extended infeed and outfeed (770 mm each) Accessories: 4 pcs soldering frames, extended with center supports 1 set of various hand tools (hydrometer, spoon, spatula, etc.) The system was only operated sporadically, approximately 6 times per year for half a day. Therefore, it is in like-new condition. Since the system was used with only one soldering wave, the second solder pump is still unused and included in its original delivery condition. Self-dismantling and pickup only! No shipping possible. Kdodpfx Aijzku Rco Ror Price negotiable.

Condition: ready for operation (used), Year of construction: 1979, Available immediately ex-works: Swivel bending machine, Lotze Type 161 / 2500 / 6 Year of manufacture 1979 Bending length 2550 mm Material thickness up to 6 mm Kdjdpfezukhrox Ai Rjr Drive power 7.5 kW Weight 6 tons Price: EUR 6,750.00 plus VAT, ex-works.