Used Halter Loadassistant Universal Big 70 for sale (18,426)

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Nwodpfxjy Hkd Ho Ai Ten Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R-404A and R23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant Nwedpfx Ajzg Tpisi Ten 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Nwodpjzg Tp Njfx Ai Tjn Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R-404A and R23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Vötsch Type: VT 7012 S2 Water-cooled version Vötsch temperature shock test chamber / environmental simulation system Model: VT 7012 S2 Two-chamber system (hot / cold chamber) For sale is a high-quality Vötsch temperature shock test chamber for rapid temperature change tests in industry, research, and development. The device is in used condition. See pictures for optical condition. Control panel and observation window are included. Temperature data: Hot chamber: +50 °C to +220 °C Cold chamber: -80 °C to +70 °C Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K Heating rate hot chamber: approx. 11 K/min Heating rate cold chamber: approx. 2 K/min Cooling rate cold chamber: approx. 3 K/min Test chamber: Test chamber volume: approx. 125 liters Internal dimensions: approx. 470 x 650 x 410 mm Cable entry: Ø approx. 67 mm Dimensions: External dimensions: approx. 930 x 2115 x 1970 mm Electrical data: Mains connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 10 kW Rated current: approx. 25 A Refrigerant according to nameplate: R404A: 2.9 kg R23: 1.27 kg Operating pressure ND: max. 22.5 bar Operating pressure HD: max. 25 bar Weight: approx. 1000 kg Nwedpfjy Iyuwsx Ai Ten Equipment / Features: Two-chamber shock test system Rapid temperature change testing Digital control / display Program operation Observation window Cable entry Water-cooled version For your safety as a buyer, the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Scope of delivery: Vötsch VT 7012 S2 temperature shock test chamber Scope of delivery as shown in the pictures Condition & Notes: Condition: used Inspection possible by arrangement Loading can be organized (Changes and errors in technical data are subject to change!) We would be happy to answer any further questions you may have on the phone.

Condition: used, Weiss Type: WT-1300/70/15 Weiss temperature testing chamber, water-cooled with touch panel control Data for temperature tests: Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate: Heating: 15 K/min Cooling: 10 K/min Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature homogeneity spatially: ± 0.5 to ± 2 K Test chamber dimensions: Height: 920 mm, Width: 1100 mm, Depth: 1330 mm External dimensions: Height: approx. 2050 mm, Width: approx. 1300 mm, Depth: approx. 3200 mm Permissible test item weight: Total load on the test chamber floor: 150 kg Load per insert shelf: 50 kg Data according to the nameplate: Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Data for operation: Rated voltage: 3/N/PE AC 400 V ±10% 50 Hz Rated current: 63 A Nwedpfeza Dv Iox Ai Ton Rated power: 44 kW Refrigerant: R404A: 14.0 kg R23: 5.4 kg Maximum permissible pressures: R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standby pressure: 18.5 bar Equipment: Touch panel control Stainless steel test chamber Multiple insertion levels Side access Heated door seal Water-cooled refrigeration unit CEE connector CE marking available Weight: approx. 1500 kg For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Scope of delivery: (See image) Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Binder   Type: Binder MKT 240 E3 Refrigerated/Heated Cabinet -70°C to +180°C, 400V   For sale is a professional environmental simulation cabinet from the brand BINDER, model MKT 240 E3. The device is ideally suited for temperature tests in industry, research, quality assurance, as well as electronics and material testing.   Key features:   Temperature range approx. -70 °C to +180 °C 240 liter useful volume 400V high-voltage connection Power consumption 6.5 kW Precise microprocessor control Low-temperature technology with R404A / R23 Robust industrial design Made in Germany   Technical data:   Model: MKT 240 E3   Voltage: 400 V / 50 Hz / 3~ Power: 6.5 kW Rated current: 11.3 A   Max. temperature: 180 °C Refrigerant: R404A / R23 Nsdpfxeylxvyo Ai Tswn Max. operating pressure: 25 bar   Interior dimensions: approx. 600 x 650 x 600 mm Exterior dimensions: approx. 925 x 1,825 x 865 mm   Weight: approx. 320 kg   Condition: used   Scope of supply: (See image)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, CTS Type: T-70/600/S Water-cooled temperature testing chamber Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for external control of the test item Nwedpfx Aszg Ty Isi Tsn Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Refrigerant: R404A / R23 Weight approx. 700 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber, Water-Cooled The Weiss climate chamber WK11-600/70/5, with an approximate usable volume of 600 liters, is suitable for temperature and humidity testing as well as for conditioning samples and materials in the range of -70 °C to +180 °C. Simcon/32 - Net Controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door closure: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door closure: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Connections: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Nwodpfx Aiezimg He Tjn Data for temperature tests: Temperature range -70 °C to 180 °C Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviations: ± 0.5 to ± 2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Thermal compensation: at +20 °C: 5000 W at -20 °C: 5000 W Data for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 % RH Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.3 K Spatial temperature deviations: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation in the center of the usable space: ± 1 to ± 3 % RH Thermal compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Fuse on customer side: 32 A slow-blow Permissible weight of test specimen: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 675 kg Refrigerant: R452A / R23 Important note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: TS -70/1000-10 For sale: CTS temperature test chamber, model TS -70/1000-10. Cooling: water-cooled refrigeration unit. Compressor has been replaced! Features: Multi-touch control USB and Ethernet interfaces Feedthroughs for test cables, 4 × Ø 125 mm Safety temperature limiter Application areas: Environmental and durability testing Temperature cycling tests (stress screening) Quality assurance and research & development Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: Height approx. 1000 mm, width approx. 860 mm, depth approx. 1100 mm External dimensions: Height approx. 1950 mm, width approx. 1270 mm, depth approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are reserved!) Nwodsziizyopfx Ai Tjn We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2018, x-travel 620 mm y-travel 350 mm z-travel 400 mm Njdpfx Aoz St Nroi Tjwn table surface area 820 x 420 mm Maximum weight on the table 300 kg milling head -swivable +/- 90 ° Speed range - 2 levels 0 - 4.500 U/min feed speeds 0 - 2.000 mm/min rapid traverse 5.000 m/min total power requirement 7 kW weight of the machine ca. 1,65 t dimensions of the machine ca. 2,25 x 1,9 x 2 m

Condition: excellent (used), fuel type: diesel, color: yellow, mast type: telescopic, General information Year of manufacture: 2017 Year of construction: 2017 Operating hours: 2.576 Serial number: JCB5AA7GAH2569809 Technical information Chassis type: rigid Weights Empty weight: 7.220 kg Carrying capacity: 3.100 kg GVW: 10.320 kg Functional Mast length: 7 m Lifting capacity: 3.100 kg Quick coupler system: Yes Nwjdpez S Hzzofx Ai Ten Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Other information Emissions class: Stage IV Additional information Please contact Ernst van Hek for more information

Condition: good (used), Year of construction: 2008, functionality: fully functional, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, 1 Universal machining center, Grob G 350, year of manufacture 2008 5-axis simultaneous operation Nwjdpfx Aozqg Elsi Ton Control system: Heidenhain ITNC 530 Travel distances: X-axis: 600 mm Y-axis: 770 mm Z-axis: 675 mm Total power consumption: 47 kW Machine weight approx.: 13 tons Tool interface: HSK-A63 Number of tool positions in the magazine: 40 Measuring probe, infrared Dual pallet changer Coolant system, 40 bar, chip conveyor

Condition: used, Year of construction: 1982, center height: 125 mm, grinding length: 650 mm, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Working area Grinding diameter: 250 mm Grinding length: 650 mm Center height: 125 mm Distance between centers: 650 mm Grinding length in plunge grinding: 80 (100) mm Grinding depth in internal grinding: max. approx. 170 mm Grindable bore: max. 90 mm Workpiece weight: max. 80 kg Distance between workpiece spindle and tailstock center: 960 mm Spindles Internal grinding spindle speed: 9,500–50,000 rpm Grinding wheel diameter: max. 400 mm Spindle bore: 30 mm Workpiece tailstock can be swivelled: 90° Feed and table movement Workpiece table speed: 50–10,000 mm/min Feed rate: 240 mm/min Cooling Njds Aa Ai Aspfx Ai Tjwn Coolant consumption: 36 l/min Drive and power Spindle motor drive power: 6.25 kW Connected power: approx. 10 kW Total power consumption: 8.5 kW Machine data Machine weight: approx. 3.4 t Space required: approx. 3.9 × 2.5 × 1.85 m Control and drive Control: Studer Drive: electric / hydraulic Speed control: stepless EQUIPMENT Tailstock with fine adjustment and hydraulic retraction Workpiece tailstock with increased accuracy Table air lift Hydraulically foldable dressing device Radius dressing device Hydro-cyclone filter Automatic grinding wheel balancing device Automatic dressing cycle with speed compensation Internal grinding device

Condition: used, mileage: 145,000 km, power: 132 kW (179.47 HP), first registration: 07/2020, fuel type: diesel, next inspection (TÜV): 07/2028, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Special equipment: Storage compartment on the dashboard with USB connection, airbag on the passenger side, 13-pin trailer socket, comfortable dashboard, audio system: digital audio system (DAB) HI-Connect with 7" color display and navigation, body manufacturer interface, rear differential lock, rear axle suspension: trapezoid, programmable speed limiter system, automatic climate control, compressor 170 ccm, LED cargo area light, steering column (steering wheel) adjustable in height and length, exterior loading light above the rear doors, switch for lighting in the cargo area, mud flaps front and rear, auxiliary heater (hot water) with timer Additional equipment: Trailer stabilization program (TSM), trailer socket preparation, traction control system (ASR), design: C-series, exterior mirrors electrically adjustable and heated, ceiling light in the cargo area, electronic brake force distribution, driver assistance system: emergency braking assistant AEBS + City Brake, digital tachograph, front axle suspension: torsion bar spring, windshield and side windows tinted, generator 210 A, speed limiter system 90 km/h, grab handle A-pillar, urea tank (AdBlue): 20 liters, rear door (opening angle 260 / 270 degrees), body/superstructure: standard high-roof van, fuel tank: 90 liters, engine 3.0 liters - 132 kW diesel, wheelbase 4100 mm, spare wheel with road tires, spare wheel holder in the cargo area, low emissions according to exhaust standard Euro 6d, sliding door cargo/passenger compartment right, seats in the driver's cab: double passenger seat, seats in the driver's cab: driver's seat comfort (hydraulically adjustable), service indicator, permissible gross weight 7.00 t, twin tires on 2nd axle / rear axle. Nwodpfx Aij Ad Stfo Tjn

Condition: used, operating hours: 24,849 h, lifting height: 4,610 mm, free lift: 1,560 mm, fuel type: gas, mast type: triplex, fork length: 1,190 mm, fork width: 1,100 mm, total height: 2,200 mm, total length: 3,700 mm, total width: 1,180 mm, color: grey, Year of manufacture: 2018 Lifting capacity: 3.000 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - Serial number: 517387J00054 - Operating hours: 24849 - Lifting capacity: 3000kg - Lifting height: 4610mm - Overhead clearance: 2180mm - Free lift: 1560mm - Fork length: 1190mm - Maximum fork width: 1100mm - Minimum fork width: 250mm Njdpjywt N Hofx Ai Tewn - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Heating, Free-lift, Full cabin - Mast: Triplex - Inspection valid until: 12-2026 - Drive: LPG - Motor brand: Izusu - Transport dimensions: 3705mm x 1180mm x 2200mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 980 mm, area performance: 3.92 m²/h, overall weight: 32 kg, tank capacity: 20 l, The KM 70/25 C manual sweeper makes cleaning hard surfaces both indoors and outdoors effective and efficient. The sweeping roller and side brushes are battery-powered, which significantly increases working comfort: Users can effortlessly sweep corners and hard-to-reach areas with considerably less effort. The foam filter with passive extraction reduces dust development and keeps the Nedpszzylajfx Ai Town work environment clean. The sweeping roller can be adjusted in six stages, adapting its cleaning performance to different surfaces. The practical storage compartment for additional equipment such as buckets and coarse dirt tongs makes the work easier. The tool-free replacement of side brushes and filters also simplifies maintenance. The 36 V Kärcher Battery Power battery platform ensures sufficient power in every situation. The interchangeable battery can be removed for easy transport. The machine comes with a battery and a charger. Technical data: Working width with two side brushes: 980 mm Container volume: 20 liters Area performance: 3920 m²/h

Condition: excellent (used), mileage: 614,915 km, power: 427 kW (580.56 HP), first registration: 04/2015, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 7,900 mm, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, air conditioning, airbag, cruise control, electric window regulation, fog lights, power assisted steering, retarder, = Additional options and accessories = - Aluminum fuel tank - Heating - High Beams - Intarder - Leaf springs - Radio/CD/Audio system - Sun visor = Remarks = TRANSPORT TO ANTWERP 590 EURO Nedpjz St A Sefx Ai Tjwn = More information = General information Year of construction: 2015 Technical information Number of cylinders: 8 Axle configuration Front axle: Steering; Suspension: parabolic suspension Rear axle 1: Double wheels; Reduction: hub reduction; Suspension: leaf suspension Rear axle 2: Double wheels; Reduction: hub reduction; Suspension: leaf suspension Weights Empty weight: 18.240 kg Carrying capacity: 7.760 kg GVW: 26.000 kg Condition Technical condition: very good Visual appearance: very good

Condition: good (used), functionality: fully functional, Price starting from EUR 3,200 The press is ideal for gluing up to 4200 x 500 x 70 mm very practical and very space-saving 15 press cylinders (membrane cylinders) Press stroke per cylinder 70 mm, pressing force per cylinder 6800 N Nwjdpfx Aieg Uk Eis Ten 16 pressure plates Transport dimensions: L 4.5 x W 1.1 x H 0.5 m Weight: approx. 600 kg

Condition: new, Workbench V B1500xT700xH890mm, universal top, light gray, blue, 3 drawers, open compartment, ANKE * Stable base frame made of square steel tubing 45 x 45 x 2 mm * Leveling with a 25 mm adjustment range * 2 working heights: 840 and 890 mm * High-quality powder coating Total load capacity: 1500 kg Depth: 700 mm Frame: light gray, RAL 7035 Load capacity per drawer: 100 kg Height: 890 mm Nwodpfxo Acv Tge Ai Ten Worktop: universal top Width: 1500 mm

Condition: new, Work bench V B1500xT700xH840mm, universal top, light gray, periwinkle blue, 3 units, recessed, ANKE · Stable base frame made of square steel tube, 45 x 45 x 2 mm · Leveling adjustment with a 25 mm adjustment range · 2 working heights: 840 and 890 mm Nwedpfs Acv U Rjx Ai Tjn · High-quality Frame: light gray, RAL 7035 Width: 1500 mm Work top: universal top Depth: 700 mm Total load capacity: 1500 kg Height: 840 mm Load capacity per drawer: 100 kg

Condition: new, Work bench V, B1500xT700xH840mm, universal top, light grey, periwinkle blue. Number of drawers x H: 1x180, 1x360mm. Njdpfj Acw A Nsx Ai Tjwn * Sturdy base frame made of square steel tubing, 45 x 45 x 2 mm. * Leveling adjustment with a 25 mm adjustment range. * 2 working heights: 840 and 890 mm. * High quality. Height: 840 mm Frame: light grey, RAL 7035 Width: 1500 mm Depth: 700 mm Load capacity per drawer: 100 kg Worktop: Universal top Total load capacity: 800 kg

Condition: new, Workbench V B2000xT700xH840mm, universal top, light gray, periwinkle blue, number of drawers x height: 1x180, 1x360mm · Sturdy base frame made of square steel tube 45 x 45 x 2 mm · Leveling adjustment with a 25 mm adjustment range · 2 working heights: 840 and 890 mm · High quality Worktop: Universal top Frame: Light gray, RAL 7035 Load capacity per drawer: 100 kg Height: 840 mm Width: 2000 mm Njdpe Acw Dtefx Ai Tewn Depth: 700 mm Total load capacity: 800 kg

Condition: new, 31.8 x 81.3 - 28.6 x 108 Nsdpfxs Abdhvj Ai Tewn Packaging unit: piece Packaging quantity: 1 Frame size: AW 35-80

Condition: new, Suitable for: small tractors, construction machinery, timber cranes, etc. Width: 456 mm; overall height: 480 mm; depth: 518 mm; distance between adjustment rails: 270 mm. Packaging quantity: 1 Packaging unit: piece Nwsdpfx Ao Abc Alei Ten

Condition: new, L = 135; KH2/4/6 Nwjdpfe Abflpsx Ai Ton Packaging quantity: 1 Packaging unit: piece