Used Hammerlift Storage Cabinet With Nitrogen/Xcda Flush for sale (14,167)

Condition: used, mileage: 22,000 km, power: 353 kW (479.95 HP), first registration: 06/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,740 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #348 MAN TGS 26.480 6x2 -4 BL with combined high-pressure flushing and suction-pressure tank body ADR Type K 14.0 / 28 PE Body KROLL Fahrzeugbau-Umwelttechnik Gmb * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach stop side 5,200 mm * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tanker type K 14.0 / 28 PE * Extension piston with 3 locking points * (3,300 l water/10,600 l sludge, 5,500 l water/8,200 l sludge, 7,700 l water/6,000 l sludge) * Suction from open waters possible "comfort version" via cassette boom with integrated filter * Tanker equipment according to ADR - type class AT/FL L4BH * DRAINING: by means of a pneumatically actuated piston * MUDDING WATER DRAIN DN 80: for pushing back the dirty water via the boom into the sewer. * Manhole DN500 MAN TGS 26.480 chassis * 6x2 - 4BL * TipMatic with OMSI * 470PS/346KW * EURO 6e * Fuel capacity 400l * Chassis color RAL 9010 pure white * Color cab RAL 9010 pure white Lrodpfx Aex Rv Raogret * 2x LED rotating beacons on the cab * Reversing camera * Navigation * Air conditioning Vacuum system * CVS VacuStar 1600 approx. 1,550cbm/h at 400bar * Drive: flexible, via cardan shafts, V-belts and pneumatically switchable friction clutch from the auxiliary drive of the vehicle engine. * approx. 20m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach stop side 5,200 mm * Additional suction hose hoses with suction at the right rear with approx. 30 m DN 80 suction hose High pressure system * Uraca KD 718 approx. 315 l/min at 170 bar * Drive: elastic, via cardan shafts, V-belt and pneumatically switchable friction clutch. * approx. 240m HP hose DN 25 * Large HP hose reel for 240m 1? DN 25 180° swivel * Equipped with 240m DN 25 * small HP hose reel for 80m ?? DN 13 hydraulic * equipped with 80m DN13 Special features * Hose storage cassette with telescopic boom DN 125 * Infinitely variable height adjustment of the suction hose hydraulically via roller guide carriage * Hydraulic and telescopic extension arm for suction hose that can be swiveled through 180 * ADR version L4BH type class FL incl. EX/II, EX/III and AT * Spray gun * LED rotating beacons * Removable and swiveling halogen work lights * LED ambient lighting * Remote control of work functions via CAN-BUS technology * Radio remote control with 14 functions * Hand-washing device (warm) * Large cabinet at the rear left, e.g. for a sliding camera * Rear view camera with 7? color monitor incl. day/night switching * Sound insulation cladding in front of pump compartment * WATER MANAGEMENT WARNING SYSTEM: with buzzer in the main control cabinet and automatic pump shutdown. * Residual water drainage: pneumatic for all water-bearing parts with connection to the truck compressed air system. * Large equipment box * Tool box * Holder for traffic cone * vice * ladder * Large advertising boards on the right and left * Manhole DN500 Technical data* GGW 26.000KG * Empty weight 18,760 KG * Length 9,280mm * Height 3,740mm * Width 2,550mm * Wheelbase 3,900mm For more detailed information and/or pictures please contact us directly. You will find a large selection of other vehicles to BUY or RENT under: Subject to alterations, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods.

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Lrsdpfx Agjvhctwjret Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,500 h, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb Lrsdpeu A U Nkofx Agrot  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 2,500 kg, cooling capacity: 50 kW (67.98 HP), volume flow: 10 m³/h, The Air Liquide cooling and heating system is a process thermostat designed for optimal and precise temperature control for any application demanding rapid, precise, and powerful thermal control between -80°C and +70°C. The temperature control unit works by thermally conditioning the heat transfer fluid Syltherm XLT within a closed-loop circuit. For cooling, liquid nitrogen (LIN) is used as the cryogenic medium to lower the fluid's temperature. For heating, an integrated electric resistance heater raises the fluid temperature to a maximum of +70°C. The conditioned fluid is then circulated from the unit to the external application to enable precise process temperature control. The system is fully automated, ensuring precise and reliable process control with minimal manual intervention. Original paper documentation is included. • Year of manufacture: 2016 • Manufacturer: ALTEC GmbH Lredpfswt A Eisx Agrjt • Condition: Fully functional • Cooling Capacity: 50 kW • Operating temperature: -80°C - 70°C • Automation: Fully automated operation • Documentation: Original paper documentation included • Heat transfer fluid: Syltherm XLT • Heat transfer fluid flow rate: 10 m³/h • Material: Stainless steel 304L (1.4541) Dimensions: • Width: 1800 mm • Height: 2000 mm • Length: 3500 mm • Weight (empty): 2500 kg • Insulation: PU foam and aluminium sheet cladding Potential Applications Include: • Pharmaceuticals: API synthesis, reactor cooling, vaccine storage, biotech applications. • Food Processing: Flash-freezing, quality preservation. • Aerospace/Automotive: Component testing, material treatment. • Electronics: Manufacturing and testing. • Materials Science: Cryogenic milling and processing. • Research & Development: Any application requiring precise thermal cycling. We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: S2909535010029, travel distance X-axis: 600 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 805 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK ONE, spindle speed (max.): 16,000 rpm, coolant supply: 40 bar, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - powerful Motorized spindle HSK-A 63, 16,000 rpm - prepared for automation - IKZ 40 bar _____ Basic machine G350 access-SERIE Travel path of the X-axis 600 mm Travel path of the Y'-axis 770 mm Travel path of the Z-axis 805 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector 800 m³ Work area door, automatic, for manual and automatic loading/unloading Stainless-steel internal work area enclosure Fluid cabinet doors Lrjdpfx Agjx Ewfzsrst SIEMENS SIEMENS SINUMERIK ONE Swivel axis calibration GSC Advanced connection of an automation system - standard interface version 1.7 (GROB) Technology package SINUMERIK MDynamics - milling (SIEMENS) Rotary table with pallet clamping system GROB (B-axis, 5-axes) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW (GROB) GROB spindle diagnostics GSD Compact double disk-type magazine HSK-A 63 with 90 tool pockets Tool cleaning device Electromechanical tool breakage detection device Laser measurement system LaserControl NT LC50-DIGILOG, BLUM-NOVOTEST Pallet 400 x 400 mm, T-slots, without pallet changer hook Scraper conveyor, discharge height 1,100 mm High-pressure cutting fluid system (5-40 bar, IKZ) Continuous cooler for cutting fluid with an air cooled cooling unit (13 kW) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Air gun at the work area Flush gun at the work area Compressed air cleaner bar for safety screen in work area door Machine status light, 3-colored Machine accuracy package 1 for a machining center of the access series Radio touch probe RMP400 (RENISHAW) Remote machine diagnostics with access control switch 12-month warranty

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm Lrjdjzk Nmrepfx Agrjt - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2008, used Manufacturer: SCM Type: OLIMPIc K 200 Year of manufacture: 2008 Machine number: AF / 3623 CE type-tested: yes Feed rate m/min: 10 Cutting from the roll up to mm: yes Swiveling cutting unit 0° 3° 5° 20°: 90° Flush and radius milling with pneumatic feed: yes Radius cutting blade controlled / fixed: yes Edge thickness mm: 0.4 - 3.0 Workpiece height mm min / max: 8 - 50 Workpiece width mm min: 65 Ljdpfx Ajzbc Edogrjrt Space requirement approx. L x W x H mm: 2950 x 1250 x 1350 Weight approx. kg: 525 Storage location 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 550-4300 GX injection molding machine Year of manufacture: 2013 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 4300 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 5500 kN / 550 t Mold opening force – pressure pads: 385 kN Platen dimensions (H × V): 1430 × 1350 mm Distance between columns (H × V): 1040 × 910 mm Maximum mold opening stroke: 1350 mm Minimum/maximum mold height: 400–950 mm Maximum distance between platens: 1750 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Lrodpfx Aszvm Dlegrjt Ls/D ratio: 20:1 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Injection rate: 636 cm³/s Screw speed: 195 rpm Nozzle clamping force: 129 kN Electrical and hydraulic equipment Rated motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 728 mm Dry cycle time / stroke according to KraussMaffei standards: 2.5 s / 520 mm Oil tank capacity: 1180 l Dimensions and weight Machine dimensions (L × W × H): 8.08 × 2.80 × 2.39 m Net weight with control cabinet: 25.0 t

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used machine MAKA PM 270 R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2001 Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile control panel stand. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis) B-axis 200° (swivel axis +/- 100°) Rapid traverse speed X/Y axis 45 m/min. Z axis 24 m/min. A/B axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Lsdpfevmywqsx Agrert Tool magazine: - ISO 40 tool interface for automatic tool change system. - 1 chain tool magazine with 32 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "lifting/lowering" slide rail - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! The system can be delivered including various tool holders upon request. We would be happy to make you a separate offer for this. Vacuum supply: - 1 vacuum pump, approx. 140 m³ suction power, including a tank with a capacity of 250 liters for quick vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Raise/lower stops to position components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Mobile protective cabin with safety bumpers on the operator side.

Condition: used, mileage: 47,950 km, power: 353 kW (479.95 HP), first registration: 07/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,740 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #342 MAN TGS 26.480 6x2 -4 BL with combined high-pressure flushing and suction pressure tank body, ADR Type K 14.0 / 28 PE Body: KROLL Fahrzeugbau-Umwelttechnik GmbH * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Outreach on stop side 5,200 mm * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle Type K 14.0 / 28 PE * Extension piston with 3 locking points * (3,300l water / 10,600l sludge, 5,500l water / 8,200l sludge, 7,700l water / 6,000l sludge) * Suction from open waters possible "Comfort version" via cassette boom with integrated filter * Tank wagon equipment according to ADR - type class AT/FL L4BH * DISCHARGE: by a pneumatically actuated piston * SLUDGE WATER OUTLET DN 80: for pushing the dirty water back into the sewer via the boom. * Manhole DN500 Chassis: MAN TGS 26.480 * 6x2 - 4BL * TipMatic with OMSI * 470 HP / 346 kW * EURO 6e * Fuel volume 400 l * Chassis color RAL 9010 Pure White * Cab color RAL 9010 Pure White * 2x LED rotating beacons on the cab * Rear view camera * Navigation * Air conditioning Vacuum system * CVS VacuStar 1600 approx. 1,550 cbm/h at 400 bar * Drive: elastic, via universal joints, V-belts and pneumatically switchable friction clutch from the vehicle engine's auxiliary drive. * approx. 20m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Outreach on stop side 5,200 mm High-pressure system * Uraca KD 718 approx. 315 l/min at 170 bar * Drive: elastic, via universal joints, V-belts and pneumatically switchable friction clutch. * approx. 240m HD hose DN 25 * Large HD hose reel for 240m 1" DN 25, 180° swiveling * Equipped with 240m DN25 * Small HD hose reel for 80m approx. DN 13 hydraulic * Equipped with 80m DN13 Special features * Hose storage cassette with telescopic boom DN 125 * Infinitely adjustable height adjustment of the suction hose hydraulically via roller guide carriage * Outrigger arm for suction hose, hydraulic and telescopic, and swiveling by 180° * ADR design L4BH type class FL incl. EX/II, EX/III and AT * Spray gun * LED rotating beacons * Halogen work spotlights, removable and swiveling * LED ambient lighting * Work functions remotely controlled via CAN-BUS technology * Wireless remote control with 14 functions * Hand washing facility (warm) * Large cabinet at the rear left, e.g. for a sliding camera * Rear view camera with 7" color monitor including day/night switch * Soundproofing panel in front of the pump compartment * WATER SHORTAGE WARNING SYSTEM: with buzzer in the main switch cabinet and automatic pump shut-down. * RESIDUAL WATER DRAINAGE: pneumatic for all water-carrying parts with connection to the truck's compressed air system. * Large equipment box * Tool box * Holder for traffic cones * Vice * Ladder * Large advertising panels left and right * Manhole DN500 Technical data GGW 26,000KG * Unladen weight 18,530 KG * Length 9,280mm * Height 3,740mm * Width 2,550mm * Wheelbase 3,900mm For further detailed information and/or images, please contact us directly. A large selection of other vehicles for PURCHASE or RENT can be found at: . Ljdpfx Agoxc Sx Isrjrt Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is exclusively subject to our general terms and conditions and excludes any liability.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, DIOSNA V50 – UNIVERSAL MIXER GRANULATOR / PHARMACEUTICAL GRANULATOR For sale: DIOSNA V50 Universal Mixer Granulator in exceptionally good used condition. The machine is manufactured with high-quality stainless-steel components and is equipped with a bottom-mounted three-blade mixing tool and a high-speed side chopper. The product-contact area, and especially the interior of the processing vessel, is in outstanding condition. The vessel, mixing tools, and stainless-steel surfaces are exceptionally clean and show very little sign of wear. Lsdpfx Aszxq U Hogrert TECHNICAL DATA Manufacturer: DIOSNA Dierks & Söhne GmbH, Germany Model: V50 Machine No.: 383-001 Year of manufacture: 2007 Usable bowl capacity: 46 liters Electrical supply: 400 V / 50 Hz Rated power: 6.5 kW Rated current: 15 A CE marked Ex / ATEX marking according to machine nameplate MIXING / GRANULATION SYSTEM The DIOSNA V50 combines intensive mixing and granulation in one compact processing machine. The processing vessel is equipped with: - Three-blade bottom mixing / granulating tool - High-speed side chopper - Stainless-steel processing vessel - Large side discharge system - Hinged stainless-steel vessel lid - Inspection window in vessel lid The combination of the bottom mixing tool and side chopper provides intensive product circulation and is suitable for mixing, granulating, agglomerating, and breaking down oversized product particles. CONTROL & EQUIPMENT - Siemens SIMATIC Touch Panel - Integrated stainless-steel control cabinet - Emergency stop - Key-operated control switch - Additional process control/display unit - Clean-air connections/control - Nitrogen connections/control - Mobile design on castors - Stainless-steel construction - Additional filter elements / accessories as shown in the photographs APPLICATIONS Suitable for applications including: - Mixing and homogenization of powders - Wet granulation - Agglomeration - Preparation of pharmaceutical granules - Breaking down oversized agglomerates - Pharmaceutical and chemical processing - Pilot and small production batches CONDITION Exceptionally good used condition. The interior of the processing vessel is remarkably clean and appears to have seen very little use. The mixing tool, chopper, and product-contact surfaces are also in excellent condition. The photographs show the actual machine offered for sale. INSPECTION Inspection and demonstration by appointment at our premises in: 4226 Breitenbach Switzerland Worldwide delivery can be arranged. Further technical information and additional photographs are available on request. CYCRON GmbH Switzerland Subject to prior sale and errors.

Condition: ready for operation (used), Year of construction: 2019, X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501h, program run: 3,141h, hydraulics: 8,371h, axes: 1,863h, spindle S1: 2,377h. Equipment: roller guideways in all 3 linear axes (Taiwan manufacture), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air conditioning unit for electrical cabinet, chip conveyor (scraper-type design), chip bin, work area flushing device, tailstock support for rotary table, roller guideways in all 3 linear axes, CE-compliant design, CTS (coolant through spindle), Heidenhain linear scales X/Y/Z, workpiece probing system, transformer, oil mist extraction unit, collision protection software, spindle thermal compensation, with documentation. An on-site inspection is possible. Ledpfx Aszavyfsgrjrt

Condition: used, Year of construction: 2006, BUSKRO BK700 printer. Lredpfxoq T N T Ts Agret System on MikroJet HVT305 vacum transport table and MikroJet MJ360 receiving table (no photo). Equipped with two print heads and MikroJet Type 6521 UV fusing system. Compose IQ software. Machine in working order in continuous operation. Inspection and testing possible. In addition, I attach for replacement: 2x set of conveyor belts and 3x UV lamps.

Condition: new, mileage: 500 km, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ Internal number: #550 Mercedes-Benz Arocs 6x2 L with combined high-pressure flushing and suction pressure tank body with water recovery, KROLL Type K 1.0-13.0/29 P Body by KROLL Fahrzeugbau-Umwelttechnik GmbH * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach on pivot side 5,200 mm * Tank material S355J2+N (St. 52.3) * Water recovery unit * Sliding piston with 3 locking positions * (3,300 l water / 10,600 l sludge, 5,500 l water / 8,200 l sludge, 7,700 l water / 6,000 l sludge) * Suction from open water sources possible - "comfort version" via cassette boom with integrated filter * DISCHARGE: by pneumatically operated piston * SLUDGE WATER DRAIN DN 80: for backflowing dirty water over the boom into the sewer * Manhole DN500 Chassis Mercedes-Benz Arocs * 2548 L 6x4 * Powershift 3 * 476 HP / 350 kW * EURO 6e * Fuel capacity 510 l * Driver’s cab color MB 9147 Arctic White * 2x LED beacon lights on cab * Rearview camera * Navigation system * Air conditioning Vacuum system * Samson Truck Master 2,500 ca. 2,465 m³/h at 400 bar * Drive: elastic, via drive shafts, V-belts and pneumatically actuated friction clutch from the vehicle engine PTO * Approx. 20 m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach on pivot side 5,200 mm * Additional suction hose reel with suction on rear right with approx. 30 m DN80 suction hose Lsdpfx Asyawvzegrsrt High-pressure system * Uraca P 3-45 approx. 345 l/min at 205 bar * Drive: elastic, via drive shafts, V-belts and pneumatically actuated friction clutch * Approx. 240 m HD hose DN 25 * Large HD hose reel for 240 m, 1” DN 25, swiveling 180° * Equipped with 240 m DN25 * Small HD hose reel for 80 m DN 13, hydraulically operated * Equipped with 60 m DN13 Features * Hose storage cassette with telescopic boom DN 125 * Stepless height adjustment of suction hose, hydraulically via roller guide trolley * Boom arm for suction hose hydraulically operated, telescopic, and swivels 180° * KROLL water recovery system WRS1 with self-cleaning function * Pressure-speed control * Spray gun * LED beacons * LED perimeter lighting * Remote control of working functions via CAN-BUS technology * CAN wireless remote control * Hand-wash unit (hot water) * Rearview camera with 7” color monitor incl. day/night switch * Acoustic enclosure in pump area * WATER SHORTAGE WARNING SYSTEM: with buzzer in main control cabinet and automatic pump cut-off * RESIDUAL WATER DRAINAGE: pneumatically operated for all water-carrying components, with connection to truck compressed air system * Large equipment box and hose trays * Toolbox * Holder for traffic cones * Vice * Ladder * Electric cable winch * Mount for fall protection device * Pulley for banana/guide device * Large advertising boards right and left * Manhole DN500 Technical data GVW 26,000 kg * Unladen weight approx. 20,700 kg * Length 9,800 mm * Height 3,890 mm * Width 2,550 mm * Wheelbase 4,200 mm For further details and/or pictures, please contact us directly. A wide selection of further vehicles for PURCHASE or RENT can be found at: Modifications, prior sale, and errors excepted. The buyer is obliged to independently ascertain the condition and equipment of the goods. Sale exclusively according to our terms and conditions and under Au...

Condition: good (used), Year of construction: 2015, functionality: fully functional, Reverse Osmosis Plant for ethylene glycol recovery, with a 12 m³ raw-water storage and homogenisation tank, nominal feed flow rate of 4 m³/h at 4 bar and filter backwash flow rate of 11 m³/h at 1.5 bar. Includes an automatic downflow multimedia filter with anthracite and sand beds supported on gravel, designed to remove suspended particles and protect the membranes. Compact skid-mounted reverse osmosis unit with two-stage filtration using replaceable 20- and 5-micron cartridges, a variable-speed high-pressure pump and a two-stage (1+1) × 6 reverse osmosis membrane configuration. Equipped with 8-inch DOW spiral-wound aromatic polyamide membranes installed in GRP pressure vessels rated up to 1,000 psi. Nominal recovery rate: 90%, equivalent to a theoretical permeate production of approximately 3.6 m³/h under design conditions. Low- and high-pressure piping and interconnections manufactured from AISI 316L stainless steel. Includes recirculation, front and side permeate collection, a CIP chemical cleaning system, membrane flushing, a GRP solution-preparation tank, a 25-micron mesh microfilter and a delivery pump for cleaning solutions and permeate water. Automated control system based on a Siemens S7-200 PLC, providing measurement and control of flow rates, temperature, pressures, pressure drops, operating times, pumping, backwashing, flushing and process alarms. Operator panel with a 6-inch colour touchscreen for parameter display and configuration, start/stop control, filter washing, alarm monitoring and trend graphs. Includes a 2 m³ reverse osmosis reject-water tank for subsequent transfer to the evaporator. Serial No.: MPP51525. Lrjdpfx Aozvddcogrjt

Condition: new, mileage: 500 km, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, total width: 2,550 mm, total height: 3,790 mm, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #611 Lredpfxezbgh Ao Agrst Mercedes-Benz AROCS 2548 L 6x2 BL with Kroll K 14.0 / 28 PE Superstructure ? Kroll ADR Combi L4BH ? K 14.0 / 28 PE ? Stainless steel tank 1.4301 ? Approx. 14,000 liters tank capacity ? Approx. 8,000 liters rinsing water volume ? Approx. 10,600 liters sludge volume ? Extension piston ? Piston positions approx. 3,300 l + 10,400 l / 5,500 l + 8,200 l / 7,700 l + 6,000 l Vacuum system ? CVS VacuStar 1600 ? Approx. 1,550 m³/h ? Rotary vane pump ? Approx. 20 m DN125 suction hose ? Suction hose storage cassette ? Dirty water can be discharged via suction hose ? Water chamber can be filled via suction hose High-pressure system ? URACA KD 718 ? Approx. 315 l/min at 170 bar ? Hydraulic hose reel for up to 240 m DN25 ? Approx. 160 m DN25 rubber flushing hose ? Additional flushing hose approx. 60 m DN13 rubber ? Boom arm mounted on the tank lid ? Telescopic to approx. 4,600 mm working length ? Suction hose guide on the boom Special features ? IFM CAN control with display ? Remote control ? Air conditioning ? Navigation ? Hands-free system ? Digital car radio DAB+ ? Garbage bin / scrap container ? Vise ? Hand washing facility ? Reversing camera ? Work lights, 2 LED per side, and 1 LED on the boom ? Rotating beacon, cab 2x / superstructure 2x ? Equipment cabinet with hose tray on the right and hose tray on the left ? Soundproofing cladding ? Tool box, plastic ? Advertising panels on the left and right of the tank Technical data ? Mercedes-Benz AROCS 2548 L 6x2 ? 6x4 ? EURO VI ? 476 hp / 350 kW ? Automatic transmission ? Fuel tank approx. 450 liters ? Cab color MB 2549 pure orange ? Permissible total weight: 26,000 kg ? Vehicle condition: New ? Vehicle type: ADR Combi L4BH ? VIN: W1T96402120865352 For further detailed information and/or images, please contact us directly. A large selection of other vehicles for SALE or RENT can be found at: Changes, prior sales and errors excepted. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is made exclusively subject to our general terms and conditions and with the exclusion of any warranty.

Condition: new, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #583 Mercedes-Benz Arocs 2546 6x2 with combined high-pressure flushing and suction tank body, ADR Type K 14.0 / 28 PE This Mercedes-Benz Arocs 2546 6x2 with a combined KROLL high-pressure flushing and suction tank body is a NEW vehicle in a complete ADR L4BH configuration. Equipped with a VacuStar 1600, Uraca KD 718, large hose storage cassette, telescopic boom, and extensive special equipment, it is immediately ready for the most demanding sewer, industrial, and hazardous material operations. Body ? Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH ? Tank material: S355J2+N (St 52.3) ? ADR suction/pressure tank Type K 14.0 / 28 PE ? Extension piston with 3 locking points: ? 3,300 l water / 10,600 l sludge ? 5,500 l water / 8,200 l sludge ? 7,700 l water / 6,000 l sludge ? Suction from open bodies of water possible ("comfort version") via cassette boom with integrated filter ? Tank wagon equipment ADR - Type class AT/FL L4BH ? Emptying via pneumatically operated piston ? Sludge water drain DN80 for pumping back via the boom into the sewer ----Vacuum system ? CVS VacuStar 1600 - approx. 1,550 m³/h at 400 mbar ? Approx. 20 m HD hose DN125 ? Hose storage cassette with simultaneous telescopic boom DN125 ? Parallel routing of suction and HD hose via boom ? Right-hand suction hose reel (hydraulic) with 30 m DN75, can be suctioned through ----High-pressure system ? Uraca KD 718 - approx. 315 l/min at 170 bar ? Large HD hose reel for 240 m DN25, 180° swiveling ? Equipped with 160 m DN25 ? Small HD hose reel for 80 m DN13 (hydraulic) ? Equipped with 80 m DN13 ----Special features ? Hose storage cassette with telescopic boom DN125 ? Infinitely adjustable height of the suction hose (hydraulic, roller guide carriage) ? Boom arm hydraulic, telescopic, 180° swiveling ? ADR L4BH incl. EX/II, EX/III and AT ? Spray gun ? LED rotating beacons ? LED ambient lighting ? Working functions remotely controlled via CAN-BUS ? Radio remote control with 14 functions Ledpjzuiyaefx Agrsrt ? Hot water hand wash basin ? Large equipment cabinet at the rear left (e.g. for a push camera) ? Reversing camera with 7" color monitor (day/night mode) ? Soundproofing cladding in front of the pump compartment ? Large equipment box ? Tool box ? Holder for traffic cones ? Vise ? Ladder ? Large advertising panels on the right and left ---- Conclusion A fully equipped, new Arocs/KROLL combination vehicle with a powerful suction unit, 315 l/170 bar HD system, ADR L4BH, and extensive special equipment. Ideal for professional companies with the highest technical requirements. For further detailed information and/or images, please contact us directly. A large selection of other vehicles for PURCHASE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is made exclusively subject to our terms and conditions and with the exclusion of any warranty.

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 2019-21130, overall weight: 1,950 kg, pressure (max.): 300 bar, Equipment: type plate available, AIRCO PSAL 15 SN – Nitrogen generation system (PSA nitrogen generator), year of manufacture 2019, serial number 2019-21130. Manufacturer: AIRCO Systems GmbH, Frankfurt. Complete, turnkey PSA system for on-site nitrogen (N₂) generation – for example, for laser cutting machines, packaging, or process engineering. Equipped with an integrated AIRCO/Bauer MINI-VERTICUS high-pressure booster, control cabinet “NITROGEN N₂”, buffer tanks, and piping station. Lrjdpszlat Esfx Agret Technical data: – Type PSAL 15 SN (INMATEC technology) – Max. pressure 300 bar – Weight approx. 1,950 kg – Year of manufacture 2019, low operating hours, serviced (AIRCO Systems service) Operates on electricity – Inspection with demonstration possible by appointment. Maintenance documentation available upon request. Dismantling/loading to be carried out by the buyer or by agreement. Payment before collection. Sale as is, excluding warranty. Export possible. Please include a call-back number with your inquiry.

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #603 Mercedes-Benz Arocs 3551 8x4 BL with Kroll KS 1.0 / 17.0 / 29 P Superstructure * Kroll WRS1 water recycling unit * KS 1.0 / 17.0 / 29 P * Approx. 17,000 liter tank capacity * Approx. 7,000 liter flushing water volume * Approx. 14,000 liter sludge volume * Minimum flushing water volume approx. 3,000 liters * Extension piston * 3 piston positions (approx. 3 / 5 / 7 m³ water) Lodpjzaypwsfx Agrert Vacuum system * Samson Truckmaster 3400 * Approx. 3,415 m³/h * Water ring pump * Approx. 20 m DN125 rubber suction hose * Suction hose storage cassette * Dirty water can be discharged via suction hose * Suction hose and flushing hose guide High-pressure system * URACA P3-45 G-65 with approx. 413 l/min at 175 bar * Simultaneous boom mounted on the tank lid * Telescopic to approx. 5,200 mm working length * Approx. 200 m DN32 on hydraulic reel * Approx. 180 m DN32 rubber hose * Additional flushing hose approx. 60 m DN13 rubber hose * Meter counter for flushing hose Special features * IFM CAN control with display * Remote control * Air conditioning * Navigation * Hands-free system * Boom arm with suction and flushing hose guide * Trash can / scrap container * Vise * Hand washing facility * Rear view camera * Work lights, 2 LED per side, and 1 LED on the boom * Rotating beacons, cab 2x / superstructure 1x * Equipment cabinet with hose tray on the right and hose tray on the left * Soundproofing cladding * Toolbox, plastic * Advertising panels on the left and right of the tank Technical data * Mercedes-Benz Arocs 3551 8x4 BL * 8x4 * EURO VI * 510 hp / 375 kW * Automatic transmission * Fuel tank approx. 400 liters * Cab color: White MB * Permissible total weight 32,000 kg * Dimensions approx. 10,450 x 2,550 x 3,850 mm * Vehicle condition: New * Vehicle type: Water recycling unit * FIN: W1T96404X10857865 For further detailed information and/or images, please contact us directly. A large selection of other vehicles for PURCHASE or RENT can be found at: Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is made exclusively under our general terms and conditions and with the exclusion of any warranty.

Condition: good (used), WMA WMP 08 One-Hand Spot Welder Air-cooled one-hand spot welder for vehicle manufacturing, tank construction, steel cabinet manufacturing, sheet metal processing, and the wire industry - Effortless welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardized rotary connectors - Only one connector each for welding current cable, control cable, and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Simple and user-friendly operation - All set parameters and process variables can be read at a glance - Changes to welding parameters only by authorized personnel - Configuration and program settings can be managed via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 welding times - 8 programs - Built-in unit - Automatic Mains frequency detection 50/60 Hz - Power failure-proof parameter storage - "On/Off" switching via button Additional configuration parameters (user-locked): - Program selection - Advance contact - Advance contact time - Two-hand interlock (Check) - Start signal interlock - Current flow control - Response threshold - Current flow control - Monitoring time - Current flow control - Power factor adjustment Ledpoq H Aqxefx Agrert - First half-wave delay External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. External inputs (24V, DC stabilized and switching) - Thermal switch - Thyristor temperature - Emergency stop - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke on - Program interruption after hold time (force only) - Two-hand interlock (Check)* * These functions can be enabled or disabled via configuration parameters. ``` External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay progress contact - Relay ready Manufacturer: WMA Type: WMP 08-01 Rated voltage: 400 V Mains frequency: 50 Hz Rated power (at 50% duty cycle): 22.5 kVA Control cabinet with PLC logo PDF files available under the Documents tab Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 1988, Cylindroconical 965 hl fermentation and storage tank - designed for cooling with ammonia (can also be cooled with glycol), 1 x cone cooling, 3 x frame cooling - Swivel cone - stainless steel - insulated - Stand frame, short - Cleaning air fitting with safety valve - Vacuum valve 5 tanks, also available individually or in partial quantities. Additional title: Outdoor tanks for storing fluids; years of manufacture 1988 - 1991 Capacity: 96450 l Operating pressure: 2 bar Length: approx. 12400 mm Width: approx. 3950 mm Height: approx. 3950 mm Lsdjz Ek Tmjpfx Agrsrt Weight: 6220 kg Material: Stainless steel 1.4301 Position: vertical Base construction: short supporting skirt Features: 7 tanks; Cooling: 1 x cone cooling jacket, 3 x side wall cooling jacket; swivel cone; insulation; dearation and cleaning combination; safety valve; vacuum valve; temperature measurement

Condition: excellent (used), Equipment: type plate available, 18 x sparkling wine pressure tank/storage tank made of V2A, 8 bar, with lateral agitator mixer - second-hand - used Manufacturer: Rieger Volume approx. 52,100 liters Diameter approx. 3,250 mm cyl. height approx. 5,500 mm Total height approx. 8,000 mm Cylinder wall thickness: 11 mm Operating pressure: 8 bar Working temperature: 20 C° Internal surface: 2B=IIIC ground Surface outside: marbled Top shelf: dished bottom 3 crane eyes CIP line DN 50 drawn downwards with flange connection with pressure line DN 25 5 saddle feet Tank cylinder: Manhole oval 350 x 450 mm 1/2" sample tap with flange connection Clear drain DN 65 with angle seat valve Lateral agitator mixer, type: propeller at 315° from the manhole Complete champagne pressure fitting with safety valve, pressure gauge, vacuum valve and DN 25 angle seat valve Underbody: Lsdetvg Uyopfx Agrert dished bottom Residual drain pipe pulled forward in the middle, flush with the tank DN 65 with angle seat valve 6 sturdy with height-adjustable spherical feet and sturdy washers 9 basic tanks and 9 saddle tanks are available otherwise as per photos

Condition: used, mileage: 28,000 km, power: 353 kW (479.95 HP), first registration: 05/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2026, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,700 mm, loading space volume: 14 m³, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Lredsyg Anpspfx Agret Internal reference: #349 MAN TGS 26.480 6x2 BL Wiedemann Super 2000 8.0/5.0/1.0 MAN TGS 33.510 6x4 with high-performance Wiedemann Super 2000 water recycling unit (8.0/5.0/1.0). This vehicle is purpose-built for professional sewer cleaning and flushing operations, combining high suction capacity, efficient water recycling, and robust high-pressure technology in a durable and practical configuration. With a 14,000 l tank capacity, 3,000 m³/h vacuum performance, large-diameter DN150 suction pipe, and a powerful Uraca high-pressure system, this unit is ideally equipped for demanding municipal and industrial applications. Extensive control, comfort, and safety features ensure efficient operations even during extended deployments. Superstructure * Wiedemann enviro tec * Super 2000 8.0/5.0/1.0 water recycling system * 14,000-liter tank capacity * 1,000 liters of fresh water * 5,000 liters of flushing water * 8,000 liters of sludge capacity * Tank discharge by 45° tipping Vacuum System * Wiedemann & Reichhardt KW 4000 * 4,000 m³/h * Approx. 25 m suction hose DN 125 High-Pressure System * Uraca P3-45 65 – 413 liters at 175 bar * Approx. 180 m HD hose DN 32 * Hydraulic hose reel with approx. 80 m DN 13 Additional Freshwater System * Speck NP 25/50-150 with 50 l/min at 150 bar * Spring-loaded reel with 10 m pressure hose DN10 Special Features * Sludge tank made from material 1.4301 (stainless steel) * Suction and HD booms * 5-liter warm water hand wash system * Stainless steel toolbox * Operator cabinet with display * Engine start controllable from operator cabinet * NMV start controllable from operator cabinet * Radio remote control with display * Equipment cabinet with two hinged doors – both sides * Hose storage * Pump compartment sound insulation extended * LED work lights * Central lubrication system Technical Data * Unladen weight: 19,030 kg * GVW: 26,000 kg * Length: 9,990 mm * Height: 3,700 mm * Width: 2,550 mm Chassis * MAN * TGS 26.480 * 6x2 * 353 kW / 480 HP * EURO 6 * Automatic * Air conditioning * Self-propelled sewer cleaning machine Summary: A highly capable MAN TGS 26.480 6x2 with Wiedemann Super 2000 water recycling system, powerful vacuum and high-pressure technology, and well-designed operator and comfort features. The ideal solution for professional sewer cleaning operators who value efficiency, high performance reserves, and robust technology. For further detailed information and/or photos, please contact us directly. A wide selection of additional vehicles for SALE or RENT can be found at: Specifications, prior sale, and errors excepted. The buyer is obliged to verify the condition and equipment of the goods independently. Sale exclusively in accordance with our terms and conditions and under exclusion of any warranty.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Process Systems LEP13.2 KK6771 Package 11 System type: Temperature Control Unit – LEP13.2 AS Storage Project: Ammonium Sulfate Supply and Disposal Unit: KK6771 Year of manufacture: 2020 Serial number: 1003622 Equipment number: 20022749 LEP13.2 – AS Storage Temperature Control Unit TECHNICAL DATA Product: LEP13.2 – AS Storage Temperature Control Unit Medium: Ammonium sulfate Design: Pharmaceutical / GMP Product-contact materials: 1.4435 / 1.4301 stainless steel Dimensions (L x W x H): approx. 1900 x 1545 x 1580 mm Control air supply: 6 bar (AIP) Tested pressure range: up to approx. 3–4 bar (Leak test documented) MAIN COMPONENTS 2x centrifugal pumps Horizontal shell-and-tube heat exchanger Electric flow heater Expansion vessel Pressure and temperature measurement points Pneumatic control valves Manual ball valves (GEMÜ) Stainless steel control cabinet / terminal box Fully insulated piping APPLICATION The temperature control unit is used for precise temperature regulation in the ammonium sulfate storage system of a pharmaceutical production facility. Suitable for: - Pharmaceutical production environments - GMP-regulated systems - Media temperature control systems - Turn-over package integration DESIGN / CONSTRUCTION - Complete, pre-assembled skid unit - Stainless steel frame construction - Compact design with unobstructed maintenance access - Fully piped and insulated - Clear labeling of all measuring points and fittings - Pharmaceutical-grade execution as per CSL Behring customer specification - P&ID checked - Layout checked - Multiple documented leak tests - Calibrated measuring devices with certificates The system is fully assembled and prepared for seamless integration into existing pharmaceutical installations. CONDITION - As-new / Project system - Year of manufacture: 2020 - FAT completed - Pressure test passed - Complete documentation available COMPREHENSIVE DOCUMENTATION Includes, among others: - Factory certificates according to EN 10204 - Material lists - EU declarations - Inspection reports - Documentation of installed equipment - I&C documentation - As-built isometrics - User manual - Calibration certificates SPECIAL FEATURES - Project-specific pharmaceutical design Lrodpfx Agsyl I S Dsrot - GMP-compliant manufacturing - Complete skid-mounted construction - Compact footprint (approx. 1.9 x 1.5 m) - Maintenance-friendly layout - High-quality piping insulation - Ideal for technical areas close to cleanrooms

Condition: good (used), Year of construction: 2005, Used machine MAKA PE 70 5-axis CNC machining center for machining wood and plastic. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2005 Technical data: CNC control BWO 920 for 5-axis machining. LCD display 10.4" 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) A-axis 540° (rotation axis) B-axis 196° (swivel axis +/- 98°) Rapid traverse speed X/Y axis 45 m/min. Z-axis 24 m/min. A/B-axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power 7.5 kW (S1) 10 kW (S6), speed continuously adjustable up to 22,000 rpm, milling spindle HSK-F63, water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - HSK-F63 tool interface for automatic tool change system. - 1 horizontal drum magazine, with 20 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 x control circuits for "lifting / lowering" stops - 2 x control circuits for "lifting / lowering" slide bar - 2 x control circuits for "clamping / releasing" pneumatics - 2 x vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: - Machine designed with vacuum system. - 2 x vacuum clamping circuits - 1 vacuum pump, suction capacity per vacuum pump approx. 130 m³/h, with tank. - Vacuum supports with various suction plates. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. Work safety: - Mobile protective cabin with safety bumpers on the operator side. Repairs / maintenance before delivery: - New maintenance. - New slatted curtain on the portal - New sliding window Lsdpfx Agevr A A Torert - New Y-axis energy chain - New Z-axis energy chain - Various cables and air hoses replaced.