Used Heidelberg Sheetfed Offset for sale (996)

Condition: excellent (used), functionality: fully functional, power: 110.32 kW (149.99 HP), first registration: 11/2021, fuel type: diesel, fuel: diesel, driver cabin: day cab, operating hours: 172 h, Equipment: air conditioning, all wheel drive, car registration, 1352T BOKI MUNICIPAL VEHICLE 1352T Length x Width x Height – 5,070 x 1,700 x 2,190 mm (excl. mirrors) Wheelbase 2,400 mm / 990 mm Tank volume: Diesel 50 liters, AdBlue 25 liters, hydraulic oil 50 liters Additional equipment affects unladen weight, payload, and dimensions Engine FPT F1C 1152, EU 6C, 110kW (standard) FPT, type F1C, 2,998 cm³, 4-cylinder diesel engine 110 kW / 150 HP at 3,000 rpm. Torque: 370 Nm at 1,320 rpm. Emission standard Euro 6C (Stage V in vehicle documents) Steering (standard) Hydraulically steered front axle with up to 40° steering angle Left-hand drive Third axle forced steering and can be lifted Hydraulic Load-Sensing 2-circuit system Load-Sensing variable displacement pump with 2 hydraulic circuits (LUDV) Independently switchable electrically Proportional adjustment Nominal flow rate: max. 80 l/min per circuit Total flow rate: 135 l/min at 3000 1/min, max. 200 or 300 bar, manually switchable Two pressure and tank lines at the front and rear, including return flow filter With drip-free flat-face quick couplings Including leak oil line at the front and rear With separate filtration Including 2 oil flow regulators Floating position for double-acting control valve Floating position for 1 double-acting control valve at the front Double-acting control valve at the front 1 double-acting valve with 2 drip-free flat-face quick couplings at the front Operation via buttons on the joystick Air conditioning Air conditioning integrated into the vehicle's heating and ventilation system Vehicle height remains unchanged Control panel holder Control panel holder for spreader control unit Exterior mirrors adjustable and heated Electrically adjustable and heated exterior mirrors Accelerated lifting and lowering, fixed mounting plate Accelerates the lifting and lowering of attachments with their own hydraulic system Used with attachments with a high flow rate at the control function. Only in combination with: FPT engine, LS hydraulics, fixed mounting plate DIN 76060-B Rear connections offset for roll-off systems Hydraulic connections on the bulkhead placed to the outside, to allow collision-free mounting of roll-off systems Preparation for tipper cylinder Preparation of the vehicle for the later installation of a tipper cylinder, Electrical connections prepared, hydraulic connection prepared With the following additional equipment: Lodpfezf Eh Uex Aa Rorr Central lubrication system vehicle Consisting of the required lubricant distributors, Connection fittings at the lubrication points and the Distributors, as well as the lubricant lines: Front axle 10 lubrication points Rear axle 14 lubrication points Total 24 lubrication points ILC MINI MAX 12V 1.0 kg R, CT, PE Stirring impeller Control with: Operating pressure: 200 bar Speed: 22 rpm Container: 1.0 kg Grease follower lid: No Stirring impeller: Yes Low level indicator: No Outlet/number: G1/4" / 2; M10x1.8" Pump element with: Cable: Yes Clamping: Bayonet 7-pin Voltage: 12 V Connection: M12x1 IP67 Without attachments. Suitable attachments can be purchased separately: Vario snowplow HUMMEL LF-D 2700 - €7,500.00 net Roll-off tipper AR-L55-2 new - €17,500.00 net Spreader or wet salt spreader available at an additional price. Subject to changes, printing errors, mistakes, and prior sale. All information is provided without warranty. The sale takes place with the exclusion of any guarantee or warranty.

Condition: excellent (used), functionality: fully functional, power: 30.16 kW (41.01 HP), color: green, fuel: diesel, Year of construction: 2021, operating hours: 360 h, Equipment: all wheel drive, car registration, Roberine F3 base machine with the following features: Engine: 3-cylinder Yanmar turbo diesel engine 30 kW (41 hp) at 2650 rpm Displacement 1500 cm³ Fuel tank 45 liters – sufficient for a full day’s work Speed: Mowing: Forward 13 km/h Reverse 9 km/h Transport speed: Forward 25 km/h Reverse 9 km/h STANDARD EQUIPMENT: 12V socket Cruise control Command arm Weight transfer system Standard delivery with a maximum speed of 20 km/h Traction and Drive Drive: Automatic hydraulic four-wheel drive (Drive by Wire) Mowing system: Hydraulic axial piston pump for the mowing units Hydraulic tank: Capacity 55 liters with oil level sight glass Tires, Brakes and Steering Front tires: Vredestein Greentax Turf 320/55 – 12 (26x12-12 8 PR) Rear tires: Vredestein Greentax Turf 250/50 – 10 (20x10-10 6 PR) Braking system: Maintenance-free hydrostatic braking system Parking brake: Maintenance-free disc parking brake on the front wheel motors Steering: Fully hydraulic rear-wheel steering including adjustable steering column Track width 150 cm Seat: Standard fully adjustable, comfortable air-suspension Grammer seat with automatic weight adjustment and control lever Indicators: Dashboard warning lights: Battery, engine oil pressure, cruise control, turn signals, low fuel level in tank, coolant and hydraulic oil temperature Indicators: Fuel level indicator, hydraulic oil level sight glass, digital hour meter Weight and Dimensions: Overall length: 280 cm Height: 234 cm with ROPS / 166 cm with ROPS folded down Overall weight without cabin: 1225 kg with ROPS Lrsdpfxjzhkk Tj Aa Rjr Certifications F3 and R3: Certified according to CE Machinery Directive, protective device on the front of the two front flail mowing units ISO 17101-2, certified according to ISO 21299 for ROPS, STVZO-TÜV With the following options: MOWING UNITS ROBERINE F3 Number of mowing units: 3 independent, hydraulically driven flail mowing units through axial piston motors 3500 min-1 Mowing unit configuration: Fixed flail mowing unit with 12 flails Diameter 25 cm Equipped with a 3" support roller Mowing width: Variable 77 cm – 215 cm Height adjustment: 25 mm – 85 mm Weight transfer system: Electrically operated for better traction through weight transfer from the mowing units to the wheels ROPS frame Set, reversible fan Reverse fan for optimally clean ventilation grille in the hood Set, deflector Set, lighting kit (required for STVZO) Set, rotating beacon (frame) Set, protective covers for cutting units (required for road travel) Subject to changes, typing errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any warranty or guarantee.

Condition: used, Year of construction: 2016, Suitable for automatically grinding chip breaker grooves in HSS, segmented and TCT circular saws. Accessories: Control system for automatic offset of grinding spindle, coolant system, stepless adjustable working rate, machine light. 1 sawblade mount. Lrsdpfxsza Eaho Aa Rer Circular saw blade diameter: 165 - 630 mm Tooth pitch: 3 - 50 mm Saw blade thickness: 2 - 6 mm Working speed: continuously adjustable from 24 - 50 z/min. Grinding wheel diameter: 25 and 30 mm Grinding wheel width: 0.3/0.4 and 0.5 mm Connected load approx.: 0.4 kW (400 V / 50 Hz) Weight approx.: 210 kg Dimensions W x D x H approx.: 1020 x 900 x 1620 mm colour: light grey RAL 7047

Condition: new, Original-packaged Sanyo Denki servomotor for the dampening system drive in Ryobi offset printing presses. Lrjdok H Hdwjpfx Aa Rjr

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Only 110 operating hours! Features and technical specifications: Machining paths: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen boards Milling bed made from 19 mm MDF as a sacrificial plate with guide rails and slot blocks, used as a clamping method. Base frame with bracing, cast in polymer concrete, prepared for transport by pallet truck or forklift. Mechanical kit comprising profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control kit comprising a Triple Beast for controlling 3 axes, with an Ethernet connection. Leadshine driver board for the fourth motor. Four stepper motors, 5.0 A, 3 Nm, with motor cables, plus a switching power supply rated at 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wires, wire end ferrules, control cable, heat-shrink tubing and cable lugs. Fully installed in an aluminium housing, including electrical kit and emergency stop. - 21.5-inch monitor as a built-in display, including a mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining the length and adjusting the active zero-point offset. Optional extras: - High-frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. - PC with 8 GB RAM and AMD processor Lrsdpfx Aajzk Npgj Ror - Rhino 5.0 CAD software for creating both simple 2D data and 3D solid models Availability: at short notice Storage location: Flörsheim

Condition: used, functionality: fully functional, machine/vehicle number: W09507250AOK51648, first registration: 06/2010, fuel type: diesel, color: orange, driver cabin: day cab, number of seats: 2, Year of construction: 2010, operating hours: 4,890 h, Equipment: car registration, Vehicle • Model: BOKI HY 1251 Municipal Vehicle • Manufacturer’s No.: W09507250AOK51648 • Engine: IVECO Type F1C • Without tipper body Chassis & Drive • Extended wheelbase from 2,000 mm to 2,300 mm • All-wheel drive • Increased top speed to 50 km/h (instead of 40 km/h) • Performance Package III • Hydraulic Package II • Tires: 225/75 R16 • Increased permissible total weight to 5,000 kg Cab • Air-suspended Grammer comfort seat for the driver • Protective cover for driver and passenger seat • Sun visor for passenger • Interior mirror • Ventilation flap (550 × 260 mm) • Cyclone separator Other Equipment • Towing hook for maneuvering at walking speed • BOKI swivel container system, Type 130T (1,300 mm wide) • Hydraulic swiveling • Two different chain lengths for various containers Included NEW demountable tipper body • Capacity approx. 1.3 m³ • Open, symmetrical design for Multicar system • Completely welded • Floor: 4 mm • Side walls: 3 mm • Height: 770 mm Optionally available: Transport pallet ASK MC PALETTE 1800 • Dimensions: 1,800 × 1,100 mm • Manufactured according to DIN 30735 • With DGUV inspection sticker • Completely welded • Floor 4 mm with reinforcements Lrjdpezf Eawofx Aa Rer • Primed and 2-coat painted in desired RAL color • Price: €1,950 plus VAT Subject to changes, typographical errors, errors and prior sale. All information is provided without warranty. The sale is made excluding any guarantee or warranty.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Used, fully automatic 8up thermal CTP system Kodak Magnus 800 plate setter. Includes 5 MCU cassettes, UDR-C, and Glunz & Jensen MK III unloading and stacking unit. Year of manufacture: 2018. Prinergy TIFF Shooter on Dell Optiplex 3050 Intel Core i3. Prinergy Evo version 8.1 on Dell T-310 workstations. Plate size max: 950 x 1163 mm. Plate size min: 330 x 305 mm. Speed: F 28 plates/h. Standard resolution: 2400 / 1200 dpi. 1 pair Heidelberg Autoplate punches 425 mm. 1 pair Manroland Autoplate punches 780 mm. Lrsdpfx Ajytp Txja Rjr

Condition: new, maximum load weight: 29,260 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space height: 900 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2026, Equipment: ABS, Technical Data: Model and Manufacturer * Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 * Manufacturer: Kässbohrer * Type: Extendable lowbed semi-trailer with wheel recesses, suitable for transporting vehicles and heavy machinery. Lrjdpfxou Tarpe Aa Rsr Dimensions * Total length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Extension: 3,500 mm (Pe) * Overall width: 2,550 mm (extendable by 600 mm with side extensions) * Saddle height: 1,250 mm * Platform height: 875 mm * Ramp length: 2,750 mm * Ramp width: 850 mm * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm Weights and Load Capacities * Gross vehicle weight rating: - 52,800 kg at 60 km/h - 48,000 kg at 80 km/h * Unladen weight: 12,744 kg ±3% * Axle load capacity: 30,000 kg (10 tonnes per axle) * King pin load capacity: 18,000 kg Axle Equipment * Number of axles: 3 (2 rigid at front, 1 trailing axle at rear) * Lift axle: Manually load-dependent (1st axle) * Axle make: BPW axles with drum brakes Tyres and Wheels * Tyre size: 245/70 R17.5 * Brand: GOODYEAR * Tyre markings: M+S label and 3PMSF marking * Tyre pressure monitoring system: Increases fuel efficiency and extends tyre life * Number of wheels: 12 (steel rims with ET120 offset) Chassis and Suspension * Suspension: Air suspension with load gauge * Brake system: Two-line compressed air brake by WABCO, EBS 4S/3M with ABS and RSS (roll stability control) Lighting and Electrics * Lighting system: 24V, multi-chamber lamps by ASPÖCK, LED side markers and tail lights * Coupling type: Standard yellow/red for air supply connection * Connectors: NATO socket with 2 x 50mm² intermediate cable (3 m length) Ramps * Ramp type: Foldable hydraulic loading ramps with sliding mechanism * Capacity: 40 tonnes * Ramp floor: Made of hardwood * Safety features: Ramp safety tension chain included Load Securing * Lashing rings: - 2 x 2 with 5,000 daN capacity each - 1 x 2 with 10,000 daN capacity at the gooseneck - 4 x 2 lashing rings with 6,000 daN in the recess area * Container lock cases: Suitable for transporting 1 x 20 FT or 1 x 30 FT container * Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Special Features * Gooseneck: With 90° vertical corners, robust and durable * Floor covering: 45 mm thick hardwood and steel deck with checker plate * Wheel recess bridge: Removable hardwood bridge sections with steel supports to cover wheel recesses * Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Colours * Chassis: Traffic red (RAL 3020) * Partial metallization of contact surfaces Condition * New and immediately available. * Perfectly suited for heavy haulage and use in construction or machinery relocation.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Lodjwllmmopfx Aa Rsrr Vehicle description for: TGS 35.520 8x2H-6 BL CH Detachable platform body, Jost fifth wheel coupling, fully clad in stainless steel (V2A) Commercial tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side exhaust silencer, right Downward exhaust outlet 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical demands 390 l fuel tank capacity, left 35 l AdBlue tank capacity, right Air compressor, 1 cylinder, 360 cc, with fuel-saving system Pneumatically controlled air dryer Compressed air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on 2nd front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN diesel engine D2676 LFAX, 382 kW (520 hp), 2,650 Nm torque, Euro 6e Heated fuel filter, for fuels up to cleanliness class 25 Fuel pre-filter, with oil/water separator, water sensor, heated (mixing valve) F1150RA.2.28 L616 winch + 2-person basket (available as option at extra charge) Unlimited slewing range All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle boom system with PROLINK (overbending offset boom by up to 12°) Electronic overload protection with FX900 FASSI stability control FSC incl. LMB II Emergency stop, with optical alarm (90% and 100%) Pressure limiting and load holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and pressure value display (in bar and %) and 90%/100% warning on display Danfoss D900 control block with 4 control valves mounted on crane column Emergency operation for crane control High-pressure filter supplied piped Separate hydraulic tank (260 l) with filter and oil cooler mounted on crane base Hydraulic outriggers, extendable on both sides, support width 8.84 m Supports operated via radio with proportional control block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red - all cylinders painted black Load hook and mounting clevises (short / 500 mm) Travel position: boom folded transverse to vehicle direction Note: Observe onboard voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 connection box Low profile foundation 180° hydraulically upward-and-outward swinging support legs / both sides Control system for auxiliary function - winch / xhe-dynamic Control system for 2 auxiliary functions with 2 hose guides / xhe-dynamic Prepared for operation with variable displacement pump (LS) Work lights operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LEDs for 2 support legs, not mounted (crane) LEDs for 2 support legs, not mounted (additional outriggers) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS Radio remote control V7 RCS Fassi radio remote control V7S: available with 6 or 8 functions, with linear levers or joysticks. V7S with 4.3" color display / 24bit – 480 x 272 px, with 8 push buttons Engine start/stop, speed up/down, 6 x ON/OFF functions, 10m cable and various working speed regulations, incl. spare battery, charger, neck and waist belt

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,330 mm, loading space height: 2,400 mm, loading space volume: 51 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, KEMPF SKM 36/3 SHL-Light ? 3-Axle Steel Tipper New Vehicle Expected delivery date: February 2026 General Specifications Type: SKM 36/3 SHL-Light * Design: 3-axle semi-trailer tipper with conical steel trough * Permissible gross weight: 36,000 kg * Axle load: 3 x 8,000 kg * Fifth wheel load: approx. 12,000 kg * Nominal saddle height: 1,200 mm (technical: 1,200–1,260 mm) * Loading length: approx. 9,000 mm * Loading width: front 2,280 mm / rear 2,330 mm * Trough height: approx. 2,400 mm * Trough volume: approx. 51.1 m³ * Overall height: approx. 3,805 mm to loading edge (loaded) Chassis KEMPF welded fine-grain steel construction, sandblasted * Conical-offset design (offset approx. 80 mm) * All attached parts hot-dip galvanized * Chassis color: Jet Black (RAL 9005) * Trough color: White Aluminium (RAL 9006) * Tarp color: Silver (Mehler 911) * Side (white) and rear (red) contour marking to EC Directive Axles, Tyres & Suspension SAF INTRADISC plus Integral (Offroad version) * Disc brakes Ø 430 mm * Chassis laser-aligned (optimized tyre wear & consumption) * Lift axle (fully automatic, forced lowering when unladen) * Air suspension system with compact 300-mm bellows and lift/lower device * Quick air release fitted * Load gauge, tonne graduations, front left * Tyres: 385/65 R 22.5 * Rims: Alcoa Ultra ONE aluminium rims, Dura-Bright EVO, 11.75 x 22.5, ET 120 Braking System & Safety Electronic braking system (Knorr EBS) with RSP (Roll Stability Program) * ABS 4S/2M with stop light supply * Tyre pressure monitoring to ECE R141 (TPMS) * Trailer Info Module TIM G2 with brake wear indicator * Acoustic reversing warning system * Folding underrun protection (ECE R58.03) with spring lifting aid * Removable towing coupling (right side) * Reflex panel (200 x 1,130 mm) Hydraulics Front tipper cylinder Hyva (single-circuit hydraulic system, 190 bar) * Hard-chromed piston * Hydraulic connection: Edbro 1" screw coupling * Tractor unit pressure can be adjusted if necessary Trough/Superstructure Conical steel trough (wider towards the rear) * Material: HARDOX steel (HB 450 / HB 500) * Floor: 5 mm HARDOX steel, continuous * Side walls: lower 4 mm / upper 3 mm HARDOX with reinforced edges * Front wall: 20° inclined, 3.2 mm HARDOX steel * Rear wall: * Double-winged (1/3 left, 2/3 right) * Non-swivelling, manual hook locking * Grain-tight with rubber seal * Slide gate 400 x 400 mm, manual lever operation * Rear wall approx. 40 mm lower (tarp can remain open) * Pneumatic vibrator, switch operation rear left * Catwalk with guard rail per accident prevention regulations, ladder left side, 2-step entry * Internal access via steps on the front wall * Shovel and broom mount on front wall Tarp & Roof Bows Roll tarp made of high-quality PVC (680 g/m²), color silver * 3 arched roof bows (1 fixed steel, 2 telescopic aluminium) * Crank operation right side, central locking left side * Aluminium tarp guard, swiveling and lockable * Accessories: stainless steel hooks/tension rod Lighting & Electrics Complete LED equipment to EC/ADR standard * LED three-chamber lights with chrome rings * LED rear fog lamp, LED license plate lighting * LED side markers with indicator function * Brake light (LED) * 2 additional LED reversing lights (side mounted) * Internal trough lighting (LED, switch left on frame with indicator) * Socket: 15-pin Lrodexn Eckspfx Aa Rsr Accessories Two PVC toolboxes (each 660 x 500 x 4

Condition: new, maximum load weight: 29,260 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space height: 900 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer SLAR3 Tele Lowboy Trailer with Wheel Recesses Technical Data: Model and Manufacturer: Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 * Manufacturer: Kässbohrer * Type: Extendable, wheel recess lowboy trailer, suitable for the transport of vehicles and heavy machinery. Dimensions: * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Extension: 3,500 mm * Overall width: 2,550 mm (expandable by 600 mm via side extensions) * Fifth wheel height: 1,250 mm * Platform height: 875 mm * Ramp length: 2,750 mm * Ramp width: 850 mm * Wheelbase: 7,800 mm * Axle distance: 2,260 mm Weights and Load Capacities: * Permissible total weight: * 52,800 kg at 60 km/h * 48,000 kg at 80 km/h Lodsx Epaqspfx Aa Rsrr * Tare weight: 12,744 kg ±3% * Axle load capacity: 30,000 kg (10 tons per axle) * Fifth wheel capacity: 18,000 kg Axle Configuration: * Number of axles: 3 (2 fixed axles at the front, 1 trailing axle at the rear) * Lift axle: Manually controlled, load-dependent (1st axle) * Axle material: BPW axles with drum brakes Tires and Rims: * Tire size: 245/70 R17.5 * Tire brand: GOODYEAR * Tire markings: M+S label and 3PMSF marking * Tire pressure monitoring system: Increases fuel efficiency and extends tire life * Number of rims: 12 pieces (steel rims with offset ET120) Chassis and Suspension: * Suspension: Air suspension with load gauge * Braking system: Two-line pneumatic brake system by WABCO, EBS 4S/3M with ABS and RSS (roll stability program) Lighting and Electrical System: * Lighting system: 24V, multi-chamber lights by ASPÖCK, side markers, and rear lights in LED * Coupling type: Standard yellow/red for air supply connection * Connections: NATO socket with 2 x 50mm² intermediate cable (3 m length) Ramps: * Ramp type: Folding hydraulic ramps with sliding mechanism * Capacity: 40 tons * Ramp surface: Made of hardwood * Safety devices: Ramp protection chain included Load Securing: * Tie-down points: * 2 x 2 with a load capacity of 5,000 daN each * 1 x 2 with a load capacity of 10,000 daN on the gooseneck * 4 x 2 tie-down points with a capacity of 6,000 daN in the platform area * Container lock housings: Suitable for the transport of 1 x 20 FT or 1 x 30 FT container * Stake pockets: 5 x 2 stake pockets (50 mm x 100 mm) Special Features: * Gooseneck: With 90° vertical corners, stable and durable * Floor covering: 45 mm thick hardwood floor and steel floor with a drop-pattern structure * Wheel recess bridge: Bridges made of split hardwood pieces with sheet metal supports to cover the wheel recesses * Tool box: PVC-coated steel, dimensions 750 x 400 x 360 mm Colors: * Chassis: Traffic red (RAL 3020) / also available in black * Partial metallization of the support surfaces Condition: New and ready for immediate use. * Perfectly suitable for heavy transport and for use in the construction industry or for relocating machinery.

Condition: used, mileage: 699 km, power: 129 kW (175.39 HP), first registration: 06/2026, fuel type: diesel, empty load weight: 3,690 kg, maximum load weight: 3,800 kg, overall weight: 7,490 kg, wheelbase: 2,800 mm, next inspection (TÜV): 08/2027, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,600 mm, loading space width: 2,200 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, airbag, central locking, differential lock, electronic stability program (ESP), parking sensors, power assisted steering, second-hand vehicle warranty, trailer coupling, Exterior * Trailer hitch / Towing capacity 3,500 KG * Heated mirrors Interior * Automatic climate control * Driver's comfort suspension seat, horizontal suspension Safety * Airbag Comfort and Environment * Rearview camera * Lane keeping assist * Blind spot assist * Rear warning system Multimedia * Tire pressure monitoring system Other * 2 DIN 7" touchscreen radio, including Apple CarPlay and Android CarPlay, and hands-free system * Cover, exhaust system * AdBlue tank cover * Trailer socket with electrical system * Battery cover, double * Side guard * Three-way tipper, side walls and floor made of steel 3600 x 2200 x 400 mm * Spare wheel holder, double-secured * Euro 6 OBD Step E * Gearbox PTO 200 Nm for hydraulic pump * Manual throttle control, engine speed * Rear underrun protection * LED headlights * Lease purchase/financing or leasing via Daimler Truck Financial Service Germany (DTFSD) is possible. We will gladly prepare an offer for you. * Payload 3800 KG * Protective grille for taillights * Fuso safety package including floor mats * Short mirror bracket including wide-angle mirror * Valve extensions * Toolbox, side, lower * XMC module (parameterizable special module) * Limited-slip differential Other: * Nationwide delivery for €399 net plus VAT (€474.81 including VAT). * For all vans: Upon request, a 12 or 24-month Mercedes-Benz used car warranty is possible. * We will gladly take back your current vehicle, offset it against the new vehicle, or pay you the purchase price. * Leasing/financing via Mercedes-Benz Bank. We will gladly prepare an offer for you. Ledpfx Aozq E T Isa Rjrr * No liability for printing and typographical errors * Errors and prior sale excepted.

Year of construction: 2017, condition: like new (used), used RENNER REKO 550 / 50VE compressed air compressor 10 bar with petrol engine for use without power connection (for example emergency service vehicles of breakdown service or Tire service) The compressor is used, built in 2017 and has 50 operating hours. Lrsdpfx Aaed H Dr So Rer The gasoline-powered, robust reciprocating compressors not only offer you the usual advantages of the RENNER systems, but also flexibly available compressed air on construction sites, in service vehicles and in many other applications "without power outlets". They guarantee a constant compressed air supply regardless of location. The small version is mobile and quickly offset by the ergonomic handle. Thanks to its compact design, the large version can be easily moved with pallet trucks or forklift trucks and loaded onto vehicles. VE = electric start. Please note: will be delivered without battery Technical specifications: Suction capacity 550 l / min Eff. Delivery quantity 400 l / min Gasoline engine 3.6 kW Honda power unit with 4.8 hp Max. Pressure 10 bar Cylinders / stages 2/1 Speed ​​1400 rpm Sound level 98 dB (A) Compressed air tank 50 l Dimension L x W x H 810 x 460 x 830 Weight 70 kg Visit our shop in Erlangen. We have a large selection of new and used compressors.

Year of construction: 1992, condition: used, machine/vehicle number: 1784, ITEK Graphix 985CF / Ryobi 3202MCS – 2-colour continuous forms offset press Year: 1992 Condition: used Price: €3,250 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands ITEK Graphix 985CF, the ITEK version of the Ryobi 3202MCS, 2-colour offset press for printing continuous stationery and fanfold forms. The machine is equipped with tractor feed and pack-to-pack delivery. The press comes from a small printing company which ceased its activities due to serious health problems of the owner. The machine was mainly used for single-colour printing. After arrival at our warehouse, the machine was thoroughly cleaned. The machine runs and turns mechanically, but it has not printed again after cleaning. Therefore, no recent print test is available. The electronic counter is currently not working because its internal battery is exhausted. The total impression count is therefore unknown. Technical specifications * Number of colours: 2 * Application: continuous stationery / fanfold forms * Feeding system: tractor feed * Delivery: pack-to-pack * Paper width: approximately 127–356 mm / 5–14 inches * Form length: approximately 178–356 mm / 7–14 inches * Length adjustment: in increments of 1/6 inch Lodpfxezqhgdj Aa Rjrr * Maximum printing size: approximately 330 × 355.6 mm * Paper thickness: approximately 0.06–0.20 mm * Production speed: approximately 4,000–6,000 forms per hour * Dampening system: molleton * Electrical supply: 230 V, single phase, 50 Hz * Power consumption: approximately 550 W * Dimensions: approximately 1,500 × 900 × 1,410 mm * Weight: approximately 550 kg Included * Original Ryobi operating manual * Original Ryobi parts catalogue * Safety documentation * Various loose rollers * Additional trays, shafts, rods and tools * Other accessories shown in the photographs The machine is offered in its present condition and can be inspected by appointment in Son en Breugel, the Netherlands.

Condition: used, Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, OUTSTANDING FINISHING WITH SPOT UVDIGITAL EMBOSS AND HOT FOIL STAMPING Professional Performance * Communications Impact * Flat & 3D Effects * 100% Digital Performance (No plates, no Screens) * High-Gloss Coating * Spot Varnish, Inkjet Technology * Fast Output * Extended Formats * Production Cost Analyser MGI JETVARNISH 3DS With iFOIL S * High-Pile Output Stacker Lrsdszltluepfx Aa Rjr * Digital Advantages * Konica Minolta PrintHeads * Eco-Friendly In-Line Led Dryer * Varnish DIgital And Offset Prints * Variable Varnish Thickness * Variable Data Option * Software Suit Included * Artificial Intelligence Smartscanner automatic registration (AIS) * High Productivity With Single Pass Printing * Up to 1500 A3 Sheets/ Hour Media Processing * Wide range of paper weights of 135- 450 gsm * Format min. 21x29,7cm, max 36,4×102 cm * Printing on most matte or glossy laminated surfaces, with or without coating, layered paper, plastic, PVC and other closed surface materials * Spot 3D coating directly onto most digital prints with lamination or coating required Status: In production – test available Please contact us so we can share details, or video sample prints

Condition: used, technical details: new parts Lredpswmga Dofx Aa Rer special accessories original parts machine Ryobi mm Big stock of new and original Ryobi parts for all offset presses Just asking for with spare parts number and model of the machine Big Discount possible!

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 116245, GM DC330 Digital die cutting machine/ converter Compact footprint Unwind Web guide Web width 330 In / Outfeed nip for tension control Magnetic die station 200z / 25inch to support die plates of 50mm to 520mm Distortion/ Dispro factor to handle other tooth size plates Re Reg mark reader to support the printed web Die-cut offset possible inline Lateral/ Cross movement possible Waste rewinder Slitting station with manual 7 air pressured V-knives Upper and Lower rewind with options of clock or anti clockwise rotation Label or meter counting Core mandrels/spindles of 25mm, 38mm, 44mm and 76mm x 2 Cold foil Self adhesive lamination Laminator unwind and rewind Silencer to reduce noise when using the lamination Full Flexo station Lsdjylpvdepfx Aa Rsrr Varnish tray, Picking roller, Anilox roller, Print roller included GEW UV lamp Min 6 bar air pressure required Machine Weight 1200Kg !! Available for immediate sale !!

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 17271 - 17272, number of ink cartridges: 10, color channels: 10, number of print heads: 40, resolution (max.): 1,200 dpi, paper weight (min.): 28 g/m², paper weight (max.): 300 g/m², paper width (min.): 200 mm, paper width (max.): 540 mm, paper height (min.): 200 mm, paper height (max.): 100 mm, number of feeding trays: 1, total length: 12,000 mm, total width: 3,300 mm, total height: 2,400 mm, space requirement length: 18,000 mm, space requirement width: 5,000 mm, space requirement height: 3,500 mm, year of last overhaul: 2026, type of input current: three-phase, input current: 150 A, input voltage: 400 V, Equipment: auto duplex, documentation/manual, raster image processor, Canon ProStream 1000 – High-Speed Full-Color Inkjet Web Press Canon ProStream 1000 digital inkjet web press in excellent working condition. Lrjdpfszrmwdjx Aa Ror The press has been in regular production until recently and is fully operational. It has been professionally maintained and can be inspected while running by appointment. Equipped with Canon ColorGrip technology, the press delivers outstanding print quality on both coated and uncoated offset papers, providing exceptional color consistency and productivity. Key Features Canon ProStream 1000 continuous-feed inkjet press Up to 80 m/min printing speed CMYK full-color duplex printing Canon ColorGrip system included Prints on coated and uncoated offset papers Excellent mechanical and cosmetic condition Well maintained throughout its service life Available for inspection Dismantling and loading assistance can be arranged upon request This is an excellent opportunity to acquire a high-performance production inkjet press with proven reliability and industrial productivity at a fraction of the cost of a new machine. Please contact us for further technical information, photographs, maintenance records, or to arrange an inspection.

Condition: new, Year of construction: 2026, CORMAK 330 × 700 230V Universal Lathe is a precision conventional lathe designed for machining steel, non-ferrous metals, and engineering plastics. Supplied with a heavy-duty steel stand and a complete set of seven 16 × 16 mm indexable turning tools, it provides a fully equipped workstation ready for immediate operation. Powered by a reliable 1.1 kW / 230 V induction motor, featuring a 12-speed gearbox and a 160 mm wide bed, the machine delivers constant torque, excellent stability, and consistent machining accuracy, making it ideal for both workshop and production environments. Key Features 12-speed gearbox – delivers full torque throughout the 65–1650 RPM speed range without power loss. 160 mm Meehanite cast iron bed – induction-hardened and precision-ground guideways minimize wear, vibration, and ensure long-term accuracy. 38 mm spindle bore with MT5 spindle taper – suitable for machining long shafts and compatible with a wide range of tooling and accessories. Lead screw – provides automatic longitudinal feed and metric (0.5–4 mm) as well as imperial (9–40 TPI) threading as standard. Complete set of seven 16 × 16 mm indexable turning tools – ready for turning, grooving, threading, and boring operations. Tailstock with ±10 mm offset adjustment and compound slide swivelling ±45° – enables easy taper turning and machining of complex profiles. Full CE / DIN compliance – equipped with safety switches, protective guards, and motor thermal overload protection. Construction and Technology The machine frame is manufactured from high-density cast iron, providing excellent vibration damping and long-term dimensional stability. The spindle is supported by P5-class double-row angular contact bearings, ensuring spindle runout of ≤ 0.015 mm for high-precision machining. The ergonomic control panel allows quick selection of spindle speeds and feed rates, while the hardened gearbox gears ensure quiet operation, high durability, and smooth power transmission. Ljdomtyi Njpfx Aa Rorr The machine is supplied with a heavy-duty steel stand featuring an integrated storage cabinet, eliminating the need to build a separate workstation. Standard Equipment Heavy-duty steel stand with storage cabinet 160 mm 3-jaw chuck with internal and external jaws MT3 dead center Change gears for thread cutting Oil can Chuck key and service tools Complete set of seven 16 × 16 mm indexable turning tools CE-compliant safety guards Polish user manual CE Declaration of Conformity Technical Specifications Specification Value 3-jaw chuck 160 mm Swing over bed 330 mm Swing over cross slide 220 mm Distance between centers 700 mm Maximum workpiece length 650 mm Bed width 160 mm Spindle bore 38 mm Spindle taper MT5 Tool post dimensions 75 × 75 × 20 mm Maximum tool size 16 × 16 mm Top slide travel 100 mm Cross slide travel 150 mm Longitudinal carriage travel 620 mm Number of spindle speeds 12 Spindle speed range 65–1650 RPM Individual spindle speeds 65, 90, 120, 160, 220, 300, 380, 500, 640, 850, 1100, 1650 RPM Metric thread range 17 pitches, 0.5–4 mm Imperial thread range 26 pitches, 9–40 TPI Longitudinal feed rates 0.105–1.396 mm/rev Cross feed rates 0.022–0.296 mm/rev Tailstock quill diameter 32 mm Tailstock quill travel 70 mm Tailstock taper MT3 Main motor (S1/S6) 1.1 / 1.32 kW, 230 V Machine dimensions (L × W × H, with stand) 1500 × 730 × 1200 mm Weight (with stand) 320 kg ±2%

Condition: used, Second-hand machine Features and technical specifications: Drilling unit comprising a drilling motor with a holder for threaded drill bits Lrsdpfx Aozk N Trsa Rer with the option to accommodate 6 drill bits in accordance with the drilling pattern of which 5 are for a row of holes spaced 32 mm apart and 1 is offset to the rear at a distance of 32 mm from the Row of holes, e.g. for Häfele Varianta with roller conveyors to the left and right of the drilling machine Availability: at short notice Storage location: 63934 Röllbach

Condition: used, UV drying system Totalisator operating hours 1484 The system was connected to a Heidelberg GTO 52 with LACO 52-Lackiersystem. Lredezr I U Dspfx Aa Rsr No direct connection to the pre-machines/devices is required. It is a used UV lamp ADNOS 04204B4 (current designation ADS 53-160) installed.

Condition: used, This listing is for the Cole Parmer MasterFlex LS Pump Head 07528-10 with easy load ll pump head The unit is in full working condition and is ready for immediate release Cole-Parmer Masterflex L/S Easy-Load II Pump Head The Cole-Parmer Masterflex L/S Easy-Load II Pump Head is a high-performance peristaltic pump head designed for laboratory and industrial applications that require precise fluid handling. This updated model builds upon the original Easy-Load design, offering enhanced features for improved efficiency and ease of use. Key Features New Design and Automatic Tubing Retention: The updated design allows for easy tubing changes without removing the head from the drive. Automatic tubing retention secures the tubing without the need for manual adjustments, simplifying setup and reducing the risk of errors. Three-Roller Design: This design provides smooth and consistent flow, reducing pulsation and improving fluid transfer performance. Adjustable Occlusion: Fine-tune the occlusion to balance tubing life and pressure performance. By adjusting the "squeeze" on the tubing, users can optimize pressure, suction capabilities, and extend tubing life. Stainless Steel (SS) or Cold-Rolled Steel (CRS) Rotor/Roller: Choose between stainless steel or cold-rolled steel for increased durability and enhanced chemical resistance, catering to various operational needs. Stackable Design: The pump head is stackable for multichannel applications, and the rollers are offset by 45° to minimize pulsation when multiple pump heads are combined. Ljdpexuqh Ejfx Aa Rorr Compact Design: The compact design ensures efficient use of space in laboratory or industrial setups. Multiple Tubing Sizes Compatibility: The pump head accepts various tubing sizes, including L/S 13, L/S 14, L/S 16, L/S 25, L/S 17, and L/S 18. This provides maximum flexibility for different fluid handling applications. Automatic Tubing Retention for Easy Setup: The automatic tubing retention system eliminates the need for manual adjustments, ensuring an easy setup process, improved tubing life, and better overall performance. Flow Rate Range The pump supports flow rates from 0.06 to 2300 mL/min, depending on tubing size and drive settings, providing flexibility for a wide range of applications.

Condition: new, Year of construction: 2026, Efficient, quiet, and powerful mechanical machine Technical specifications: Working length: 4040 mm Total length: 5352 mm Depth: 2232 mm Working height: 950 mm Total height: 1924 mm Weight: 5,000 kg Maximum bending thicknesses: Steel: 1.5 mm Aluminum: 2.00 mm Stainless steel: 1.00 mm Copper: 2.00 mm Galvanized sheet: 3.00 mm Standard equipment: • 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam • Foot switch (MAF 400/CNC model delivered with a second foot switch) • Soft start for the bending beam • Electrically driven back gauge, 8-1000 mm Lredox Hyhbepfx Aa Rjr • 5 m power cable with 32 A mains plug (EU version) • Supply voltage: 3 x 400 V, 50 Hz (EU version) CNC S-Touch control: From profile concept to bending precision in record time Standard features at no extra charge: • Graphical display of the bending sequence for the selected program • Graphical representation of sheet position before every bend • Operator guidance – each work step visually explained via the graphic control system • Programming without submenus • Profile correction by direct touch in the desired section of the profile • Programmable angle correction • Set repeat cycles for special radius arcs • Cutting program for RSL rotary shears • Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges • Profile search possible by name, sketch selection, and profile drawing on the touchscreen • 21.5-inch LCD touchscreen with best-in-class graphics • USB port for program backup and transfer • Non-volatile memory for over 3,000 programs • Freely assignable program names (profile names) • Registration of produced quantities and machine operating time • 16 languages • Remote support (Team Viewer) • Soft start for bending beam • Back gauge with drive, 6-1000 mm • Foot switch For EU market: • 16 A plug with 5 m power cable • For MAF and MAZ models, 32 A plug with 5 m power cable

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: PB33313, input voltage: 230 V, measuring range X-axis: 50 mm, measuring range Z-axis: 300 mm, total width: 650 mm, total length: 500 mm, total height: 1,100 mm, overall weight: 110 kg, operating temperature: 20 °C, input current: 2 A, repeat accuracy: 0 mm, input frequency: 50 Hz, workpiece height (max.): 270 mm, workpiece width (max.): 40 mm, Equipment: documentation/manual, For sale: Highly precise optical measuring machine, VICI VISION scanner Lsdey Rzdljpfx Aa Rerr - Type: MTL-300 EVO - Year: 2013 - Serial No.: PB 33313 - Weight: 110 kg I am selling a new, complete and highly accurate optical measuring scanner for fast and precise measurement of complex shapes: diameters, lengths, radii, grooves, angles, offsets, and various surfaces on the same part. 50 or more measurements per minute. The machine includes additional equipment: a stable table, computer, and software for generating measurement reports and certificates. Regularly serviced by the manufacturer. It is connected to the mains and ready for immediate operation.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Equipment: brochure finisher, Equipment: Counter Color: 3,469,135 B/W: 881,076 Fiery Color Controller E-43-A Vacuum Feed LCIT RT5100 Finisher SR5050 Buffer Pass Unit Type S3 Scanner Monitor, Keyboard, Mouse The Ricoh Pro C7100S is a powerful digital printing system for professional production printing, combining impressive offset-like quality with high speed (up to 80 pages/min), flexible media handling (up to 360 g/m²) and an integrated scanner, making it ideal for demanding print service providers. Lrodpfszbyh Ajx Aa Rjr Reliable High-Performance Production The Ricoh Pro C7100S is the ideal solution for print shops, agencies, or in-house print departments that want to take their productivity and media versatility to the next level. With a constant printing speed of up to 80 pages per minute (in color and black and white) and a maximum monthly volume of up to 240,000 pages (duty cycle up to 700,000 pages), this system delivers maximum efficiency for both small and large print runs. Excellent Image Quality Thanks to the modern VCSEL laser technology and a resolution of up to 1,200 × 4,800 dpi, you get razor-sharp text, the finest color gradations, and accurate image reproduction. The advanced PXP-EQ toner process expands the color gamut and ensures that the first print is just as brilliant as the last. Includes Color Controller (Fiery) Equipped with an external/integrated Fiery Color Controller (e.g., E-43A / E-83A) for seamless integration into your workflow. Enables professional color management, RIP acceleration, and easy handling of variable data printing jobs (VDP). Technical Data at a Glance: - Model: Ricoh Pro C7100S (MFP / incl. scanner) - Printing Technology: Laser / 4-color printing system - Speed: 80 pages/minute - Max. Paper Size: A3+ (oversize) - Paper Weight: 52 to 360 g/m² - Max. Paper Capacity: Up to 16,200 sheets - Dimensions (W x D x H): 1,320 × 910 × 1,218 mm - Weight: approx. 580 kg Subject to prior sale and errors.