Used Heidelberg Stahlfolder St 100 for sale (36,073)

Condition: new, mileage: 50 km, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes Benz Sprinter 519 CDI 5.0t with Rockstroh Drain Jet 100-2 High-Pressure Flushing Installation Internal Number: #499 Rockstroh Drain Jet 100-2 * PTO from the Sprinter * Pratissoli KF32 high-pressure pump * approx. 120 liters/minute at 180 bar (40KW) * Pressure control and safety valve * 1st hydraulic HD hose reel for approx. 120m DN13 * 2nd hydraulic HD hose reel for approx. 80m DN19 * Filling hose reel with approx. 40m DN20 * approx. 1,000 liter water tank * Low water cut-off protection * Electric filling equipment and overflow protection * Electronic speed regulation * Bypass circuit * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED beacon lights * Various storage options * Waterproof plastic floor coating with non-slip surface * Basic set of cleaning nozzles Special equipment: Fsdpsxc Syrofx Aagjph 2nd battery (auxiliary battery) interior, 3-button remote for central locking, 13-pin trailer socket, 1-pole battery isolator switch, driver assistance system: traffic sign recognition, tachograph control in front under headliner, chassis: stabilization level III, all-weather floor mats, vehicle without tie-down points, transmission lock for PTO, front cup holders, A-pillar grab handles, additional main key, rear door (opening angle 270 degrees), hinged lid for storage compartment, terminal strip for electrical connections (driver’s seat console), comfort lighting in passenger/load compartment, dash load package (USB ports and additional 12V socket), wiring duct at rear portal, wiring duct at side wall, navigation system for MBUX multimedia, fog lights with cornering light, PTO 2B with intermediate shaft, parameterizable special module, cross member for trailer hitch, cross member with integrated step, sliding door left side load/passenger compartment, rear mud flaps, driver’s cab seats: comfort driver’s seat, sensor for auxiliary heater tank, additional battery separation relay, reinforced front axle, provision for transmission oil cooler, provision for load area partition, winter package, soft-close sliding door left, soft-close sliding door right Further equipment: 3rd brake light, overhead storage above windshield, storage compartment below dashboard passenger side, adaptive brake light, passenger airbag, driver airbag, acoustics package, hill start assist, trailer coupling: electrics for trailer socket, electrically folding exterior mirrors, electrically adjustable and heated exterior mirrors (both), exterior mirror with blind spot assist, outside temperature display, DAB tuner (digital radio), ceiling light in cargo space with door contact, automatic driving light control, entry grip on right rear pillar, entry handle for sliding door at load area partition, driver assistance system: turn assist, driver assistance system: active brake assist, driver assistance system: active lane keeping assist, driver assistance system: start info assist, driver assistance system: attention assist (fatigue detection sensor), driver assistance system: intelligent speed assist, driver assistance system: breakdown management, driver assistance system: crosswind assist, digital tachograph, 250 A alternator, speed limiter system 90 km/h, body/superstructure: standard high roof van, instrument cluster with color display, communication module (LTE) for digital...

Condition: used, net belt width ± 600 mm total electrical power 33 kW thermal connection: NW32 2x5 tiers product height: ± 100 mm cooking time min/max : 4-40 min max. temperature: 200°C Fsdpoy Ur A Tsfx Aagjph automatic elevator with belt wash system suitable for CIP-cleaning suitable for steam injection (heating and product yield): 4-8 bar, connection: NW 40 turning to the left

Condition: used, mileage: 217,170 km, power: 130 kW (176.75 HP), first registration: 02/2010, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 06/2028, color: orange, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Internal vehicle no.: G300103 German vehicle On our lot in Kaufungen - Kassel, immediately available More INFO at: * Luis Lucena (German, English, Spanish, French) *Viktoria Sologubova (Polish, Russian, Ukrainian, English) VIDEO: Sewer cleaner with 2,875 operating hours Rockstroh Dran Jet 100 Year of construction 2010 Pump performance 91l/min - 150 bar 115l/min - 120bar 128l/min - 160 bar* Fjdpfx Aasv Rt T Hogoph 120l/min - 180 bar* 106 l/min - 200 bar* 92 l/min - 210 bar* *only for vans High-pressure system half-side positioned high-pressure unit safety, overflow, and pressure control valve, 1.5" water filter Pump drive PTO vehicle drive (van) hydraulic (van or box body) Hose reels 1 x 80/100/120m DN10/13 1 x 80m DN16/19 1 x 40m water filling reel 3/4" Financing example: * Internal number: G300103 * Purchase price: 29,900.00 € * Down payment: 10% * Term: 60 months * Monthly payment: 468.31 € Residual value: 5,980.00 € If you like this offer or want to adapt it to your needs, contact us (Mr. Enchev). We look forward to your call Errors excepted We are happy to accept your used vehicle as trade-in. Financing directly with us is possible. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Year of construction: 2006, condition: like new (used), Zum Verkauf steht ein hochwertiger Posten pneumatischer Industrie-Zylinder des Herstellers SMC. Gesamtmenge: 5 Stück Serie: C92 (ISO-Standardzylinder) – robuste Heavy-Duty Ausführung – geeignet für höhere Kräfte und industrielle Anwendungen – standardisierte Bauform (ISO), universell einsetzbar – kompatibel mit gängigen Ersatzteilen und Dichtungen Die Zylinder stammen aus industrieller Anwendung und wurden fachgerecht demontiert. Optischer Zustand gut, mechanisch intakt wirkend. Eine vollständige Funktionsprüfung aller Einheiten wurde nicht durchgeführt. Geeignet für: – Industrieautomation – Maschinenbau – Produktionsanlagen – Wartung und Ersatzteilversorgung ISO-Standardzylinder der SMC C92 Serie sind weit verbreitet und langfristig verfügbar. Neupreis vergleichbarer Einheiten: ca. 250–450 € pro Stück. Sehr interessanter Posten für Industrie oder Handel. Verkauf vorzugsweise komplett als Set. Preis: 790 € VB Standort: Slowakei (EU) Versand europaweit möglich 🇬🇧 PREMIUM VERSION For sale: high-quality lot of pneumatic industrial cylinders by SMC Total quantity: 5 units Series: C92 (ISO standard cylinders) – heavy-duty industrial design – suitable for higher force applications – standardized ISO construction (universal compatibility) – spare parts and seals readily available The cylinders originate from industrial application and were professionally dismantled. Good visual condition, mechanically appear intact. Full functional testing has not been performed. Suitable for: – industrial automation – machinery – production lines – maintenance and spare parts SMC C92 ISO cylinders are widely used and remain standard in industrial systems. Estimated new price: approx. 250–450 € per unit. Very attractive lot for industrial users or resellers. Fedpfjy Nf Dmsx Aageph Preferably sold as a complete set. Price: 790 € negotiable Location: Slovakia (EU) Worldwide shipping available

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 7363-0044, Plastic injection moulding machine | Sumitomo SHI DEMAG - Systec 100/420-310 (1000-310) Clamping force [kN]: 1,000 Number of injection units: 1 Clamping platen width [mm]: 600 Clamping platen height [mm]: 600 Tie bar spacing horizontal [mm]: 420 Tie bar spacing vertical [mm]: 420 Locating ring diameter [mm]: 125 Minimum mould height [mm]: 250 Maximum mould height [mm]: 500 Maximum daylight [mm]: 500 Maximum ejector stroke [mm]: 150 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 149 Aggregate configuration: EE1: horizontal Equipment: 1 core pull, stacking station, with robot Inspection possible at any time by arrangement. Free loaded onto truck (Butzbach). Fedpfx Aaeygiafsgsph #Tags: Sumitomodemag | Systec400 | 100-420-310

Condition: good (used), Manufacturer Thurm Fodpfxsmw Uncs Aagjph type B 20 R 100 L 4-2 HL H STR Engine number 12618430011409 power 3,7 / 4,4 kW speed 1.425 / 2.890 rpm Shaft length Shaft diameter Weight 48 kg Dimensions Motor of milling machine Deckel FP3A CNC machine number 2206 - 0443

Condition: used, Max. punching force: 600 kN Max. shear force: 1000 kN Punches 20 mm holes in 19 mm steel Cuts on the flat bar shear up to 500 mm with material thickness of 12 mm steel Further technical data on request With a range of punches and dies as desired Fedpfxsq D E Tco Aagsph Very good condition

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross vehicle weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg King pin height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS KING PIN HEIGHT: Precise king pin height is 1,150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: Large disc Wheel offset: ET 120 Brake wear indicators (BVA) included The first axle is a self-lifting axle controlled via the EBS-E system. The third axle is a trailing steering axle. CONNECTIONS BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. Including traction aid. TRACTION AID: The traction aid is activated by pressing a button in the truck (button in truck not included). AIR SUSPENSION: Lifting and lowering function. Aluminum air tanks. STEERABLE TRAILING AXLE LOCKING: Locking of the steerable trailing axle is managed as follows: - via reverse lights - by button in truck (button in truck not included) TYRES: 6 x 385/65 R 22.5 tyres for regional haulage (manufacturer's choice) on ALCOA MATT aluminum rims, ET 120. BRAKING SYSTEM - EBS: EBS-E system WABCO 2S/2M - PREMIUM MODULATOR Dual-line compressed air braking system in accordance with CE guidelines. Spring-loaded parking brake operating on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK: 24 Volt electrical equipment. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED lighting mounted on the trailer side. Without junction box at rear - NORDIC. REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is installed in the fixed aluminum underrun protection. With foldable aluminum lighting cover. 2 x 1 five-chamber lamp - EUROPOINT III - LED version. HYDRAULICS POSITION: Connection at the front wall. With additional connection option below the body in front of support legs. ACCESSORIES EXTENDIBLE LADDER AT REAR: Extendible ladder integrated at rear of vehicle, right side. PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER: Single aluminum spare wheel holder. 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminum plank profiles. INTERNAL SEALING BETWEEN FLOOR AND FRONT WALL: Fixed sealing between floor and front wall using aluminum profile and PVC gasket. Fpjdpfx Aaoxplxzsgeh SIDE WALLS: Inner and outer surfaces smooth. Double-walled side wall profiles, 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain specification). Side wall profiles are fully welded on the inside. WEAR PLATE: Aluminum wear plate, rectangular, inside rear, 2000 (L) x 1500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electric control. 21-board floor system. Drive unit consists of 3 double-acting hydraulic cylinders with 200 mm stroke. Rear end plate in stainless steel. FLOOR SYSTEM OPERATION: Electric control with radio remote (genuine Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation using unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 aluminum floor boards - 8 mm ribbed, with welded aluminum end caps. REAR DOOR: 2 portal h

Condition: new, Year of construction: 2025, Zero mistakes, zero waste, and higher productivity! We thought SalvaStop_100 as a fundamental component to give your work an edge. Through numerical control, this electronic stop manages the push, stop and positioning of the profiles to be cut, regardless of the material. So you can reduce human errors, avoid waste and decrease labor costs. Fpedpfx Askzhb Uoagsh SalvaStop_100 is integrated with exclusive software that is easy to use thanks to an immediate, easily understandable and complete graphic interface. You can have the SalvaStop stop alone or combined with one of our Legend crosscutting saws to improve performance, work in complete safety and minimize human error.

Condition: good (used), overall weight: 41,000 kg, Year of construction: 2004, operating hours: 5,500 h, Single-toggle jaw crusher Fpodpfx Aotpaktsagsh Inlet: 1,000 x 650 mm Finished product: approx. 0/70-0/200 mm Feed hopper, vibrating feeder Electric drive with 220 kVA generator Side and main discharge conveyor Overhead magnet

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,977 h, functionality: fully functional, machine/vehicle number: MM0008-000192, turning length: 1,020 mm, turning diameter: 540 mm, travel distance X-axis: 565 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 1,050 mm, controller model: FANUC Series 31i-MODEL B, TECHNICAL DETAILS Turning length: 1,020 mm Turning diameter: 540 mm Swinging diameter over the machine bed: 750 mm Swinging diameter over the top slide: 540 mm Swinging diameter over the cross slide: 270 mm Fedpey Tw Uljfx Aagsph Travel range X-axis: 565 mm Travel range Y-axis: 170 mm Travel range Z-axis: 1,050 mm Rapid traverse rate X-axis: 36 m/min Rapid traverse rate Y-axis: 26 m/min Rapid traverse rate Z-axis: 36 m/min Power of the spindle motor: 22 W Spindle speed main spindle (max.): 5,000 rpm Spindle bore: 76 mm Spindle speed milling spindle (max.): 12,000 rpm Bar passage: 76 mm Bar diameter (max.): 65 mm Spindle nose: A2#6 Spindle diameter: 110 mm MACHINE DETAILS Control system: FANUC Series 31i-MODEL B Chuck outer diameter: 210 mm Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,850 x 2,525 x 2,805 mm Total weight: 12,000 kg Operating hours: 8,977 h EQUIPMENT Documentation/Manual

Condition: good (used), pressing force: 100 t, total width: 3,000 mm, Manufacturer: AMADA Type: HFE 100-3L + ASTRO 50Y Control: Operator Year of manufacture: 2007 Long stroke CNC Press brake Fodpfxevwcduj Aagsph 8 Axis controlled ASTRO 50Y AMADA Robot ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. When machining medium / fine thick and large dimension parts. Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. Programming has become particularly easy through EASY CAM software Safety CE Fence around machine and tobot Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) Length 8000mm Width 4000mm Please note: The information on this page is correct to the best of our knowledge and belief, and where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: excellent (used), Rear wall grating for shelf rack Schäfer R3000 Approx. 100 pcs. Used, very good condition, see pictures dimensions: 126 x 147 cm Mesh size: 5 x 5 cm Negotiation price: € 25,-- net per pc. ex stock Numerous gratings with different mesh sizes and bearing bars available! Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Fsdjiix D Eepfx Aagjph Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: refurbished (used), Year of construction: 2016, operating hours: 3,162 h, load capacity: 1,400 kg, lifting height: 7,700 mm, fuel type: electric, construction height: 3,100 mm, Friedmann Forklifts – Remade for Action Used industrial trucks from select premium manufacturers, comprehensively serviced, tested, and expertly refurbished by us according to FEM-4.004 (UVV) standards. Custom modifications of any kind available upon customer request. International transport with suitable vehicles and customs clearance available upon request. See for yourself and visit us at our facility. Friedmann Forklifts – Quality Commitment - Full functionality as per FEM-4.004 - Inspected & tested battery (C5 test) for electric units (at least 70% capacity) - Usable tires meeting FEM-4.004 requirements (minimum 70% tread depth) - Mast, fork carriage, attachments, and hydraulic system inspected - Steering axle safety checked - Forks and lift chains with a maximum wear limit of 40% - As-new driver’s seat and seat belt - New paintwork in original colors with original decals Industrial Truck Specifications - Manufacturer: Jungheinrich - Model: ETV 214 – Reach Truck - Drive type: Electric - Load capacity: 1,400 kg - Lift height: 7,700 mm - Load center: 600 mm - Year of manufacture: 2016 - Operating hours: 5,536 - Serial number: 91106310 - Mast type: Triplex - Fork length: 1,150 mm - Overall height: 3,100 mm - Own weight: 3,500 kg incl. battery Battery & Charger - Battery voltage: 48 V - Battery maintenance: 03/2024 Fpjdpfoy Rm Tfox Aagoh - C5 capacity test: minimum 70% - Charger voltage: 48 V (available upon request) Attachments & Special Equipment - Attachments: Side shifter - Special equipment: - Front tires: 0 x / Polyurethane / - Rear tires: 0 x / Polyurethane /

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Fedpfx Ajy Slzweagoph Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, battery capacity: 465 Ah, remaining battery capacity: 100 %, battery voltage: 48 V, total length: 1,030 mm, total width: 350 mm, total height: 785 mm, overall weight: 770 kg, fuel type: electric, Forklift Battery 48V 3PzS465 Battery 100% TESTED Year of manufacture: 2022 Dimensions (LxWxH): 1030mm x 350mm x 785mm Weight: 770kg Battery has been serviced and tested by a specialist company. Capacity test (C5 discharge test): 489/465Ah battery Residual capacity: 100% With Aquamatik filling system (BFS) With pole bolts but WITHOUT end discharge cable Suitable for the following models: ATLET UHE, ULS 120, ULS 140, UND 120, UNE Baumann EVU, EVU 20 - 30 Bison P2004, P 2504 Caterpillar NOH 10 K C, NOH 10 NH, NR 16 C Crown ESR 5220-1.4 DIMOS EFY P 1004-R Ford FOR 410 Hyster R 1.4, R 1.6 N, R 1.4 Indos S 16 Jungheinrich ETM 12.5, ETM 13.5, ETM 14, ETM 20, ETM/V-Q 13.5-20, ETV 10, ETV 12.5, ETV 13.5, ETV 14, ETV 16, ETV 20, ETV 220, ETV-Q 20, ES15 Komatsu FB 14 RW-3E, FB 16 RW-3E LAFIS LEV 16, LEV 20, LEV 25, LEV 30 Fpedpfsy Ryu Nex Aageh Lansing EKH 10.3, ERT 12/13.5, ERT 12/16, V 10 E 01, V 10 E 02 Linde A (CHASSIS 1120), R 10 BN, R 10 CN, R 10 N, R 12 BN, R 12 CN, R 12 N, R 14 CN, R 14 N, R 14 SN, R 16 CN, R 16 N, R 16 SN, R 20 N, R 20 W, V 10 E, MIC, WR 14, WR 16 Mitsubishi/NYK OPBH 10 KC, OPBH 10 NH, RB 16 NC Nacco A 350 Nichiyu FBRF 14, FBRF 16 Pimespo THESI A, XR 12N, XR 14 N ROCLA PHS 10, PHX 10, TEC, STB, WR 12, WR 13, WR 14, WR 16 Still/Saxby/Wagner FM 14 N, FM 17 N, FM-X 10 N, FM-X 12 N, FM-X 14 N, FM-X 17 N, FRER 12, GX-X Unicarriers/Nissan/Atlet UNG C-SIZE U4 LIGHT YALE MO 10 S, MR 14, MR 16, MR 16 N

Year of construction: 2004, condition: excellent (used), REEPACK REEFAST 100 ID.NO. 1866 Trough sealer Reepack mod Reefast 100 years mod 2004 associated gas mixer. Closes 3x troughs at the same time automatically. Fpsdof Ddbnspfx Aageh Dimensions trough 190 x 140 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2022, battery capacity: 625 Ah, remaining battery capacity: 100 %, battery voltage: 24 V, total length: 825 mm, total width: 325 mm, total height: 630 mm, overall weight: 448 kg, Forklift battery 24V 5PzS625, battery 100% TESTED Year of manufacture: 2022 Weight approx. 448kg Dimensions: 825mm x 325mm x 630mm Battery serviced and tested by a specialized company Capacity test (C5 discharge test): 651/625 Ah battery Remaining capacity: 100% With Aquamatik filling system (BFS) Fpsdjy N T Dbspfx Aagjh With pole screws but WITHOUT end discharge cable

Condition: excellent (used), functionality: fully functional, power: 11 kW (14.96 HP), Steel bar shears make Schubert, type STS 100 Used, very good condition Fpsdpstukqqjfx Aagoh Technical data: Shearing force/diameter (max.): 1000 kN/52 mm Drive power: 11 kW Equipment/special features: bar magazine, 6 m, length stop 650 mm, safety device

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Fpodpfx Asyg Eu Ssagjh Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: new, TIGERMETAL WH100 – Hydraulic Workshop Press 100 Tons | Electric + Manual Pump Instead of €10,489 gross RRP, now only €6,699 net (€7,972 gross incl. 19% VAT). You save -24% compared to the RRP! The TIGERMETAL WH100 workshop press is a high-performance and robust industrial press designed for demanding applications in workshops, production, and maintenance. With a pressing force of 100 tons, the machine is ideal for heavy-duty straightening, pressing, and bending operations. Thanks to the combination of electric drive and manual hand pump, the press offers maximum flexibility: fast operation in automatic mode and precise fine control for sensitive applications. 🔧 Technical Data: Model: WH100 Manufacturer: TIGERMETAL Pressing force: 100 tons Drive: Electric motor + manual pump Motor power: approx. 3 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 320 bar Stroke: approx. 400 mm Working width: approx. 1000 mm Max. working height: approx. 1000 mm Weight: approx. 820 kg Advantages: ✔ Combined operation (electric + manual) ✔ Extremely high pressing force for heavy-duty applications ✔ Precisely controllable pressure ✔ Laterally movable cylinder for flexible positioning ✔ Height-adjustable crossbeam Fpodpsf Sqcysfx Aagsh ✔ Heavy-duty, durable steel construction ✔ Integrated pressure gauge (manometer) ✔ Safety valve for overload protection ✔ Optionally expandable with accessories The laterally movable cylinder and the height-adjustable working table allow optimal adaptation to a wide variety of workpieces and applications. The massive steel construction ensures maximum stability and a long service life—even under intensive industrial use. The WH100 is the perfect choice for anyone looking to combine maximum pressing power with precise control and industrial reliability. A wide range of additional workshop presses in various designs, sizes, and optional equipment is available! Some images may show a slightly different version than the one offered here. The version shown in some pictures may include an additional automatic function. Available versions: 30 tons 60 tons 100 tons 150 tons 200 tons 200 tons: on request Custom machines: on request New machine! We are also happy to manufacture a custom-built press tailored to your requirements. The press can be tested on-site under power. ----- We are happy to provide individual consultation and prepare a tailored offer. Simply send a non-binding inquiry! ----- The stated price is net plus 19% VAT. All information without guarantee! Delivery available throughout Europe! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, phone, messaging platforms). You will first receive a non-binding offer including our general terms and conditions as well as information on your right of withdrawal before any purchase/contract is concluded.

Condition: good (used), Year of construction: 2000, machine/vehicle number: M 100-34 E3-D, Offer 24371 Fpodsu Rartspfx Aagoh Technical data: - Machine for the production of closed cold-formed corners - Material thicknesses 0.8 to 2.5 mm - max. achievable shelf height see table - min. Workpiece length / min. workpiece width 120 mm - Production time per formed corner, independent of material 10 sec. - Drive 400 V / 4 kW - Control panel with E - foot switch - Space requirement station 1 approx. W 1100 x H 1650 x D 1100 mm - Weight of station 1 approx. 800 kg - Space requirement for station 2 approx. W 800 x H 1400 x D 900 mm - Weight of station 2 approx. 500 kg

Condition: used, Year of construction: 2012, operating hours: 766 h, functionality: fully functional, machine/vehicle number: 103BS00126, fuel type: gas, empty load weight: 1,300 kg, construction height: 2,140 mm, drive type: Treibgas, Sweepers Chassis number: 103BS00126 Technical condition: good Fpedpfx Aasuhwv Ujgeh Description: Dulevo 100BS No.: M0143 Year of construction: 2012 Operating hours: 766 The machine is visually in a very good and technically in a good condition. Subject to errors and prior sale. If you have not found your truck, please contact us. We have a large selection of other trucks on site.

Condition: used, Year of construction: 2010, HORIZON VAC-100a + 4x VAC-100m + ST-40 (2010, Used) 1. Configuration VAC-100a Air Suction Collator Tower × 1 VAC-100m Air Suction Collator Tower × 4 ST-40 Stacker × 1 Language: English Interface Total Stations: 50 Bins 2. Specifications VAC-100 Series Max. Sheet Size: 350 × 500 mm Min. Sheet Size: 120 × 148 mm Paper Weight Range: 40 ~ 250 gsm Bin Capacity: 55 mm per station Power Requirement: 230V / 60Hz Feeding System: Air Suction System Fedpfx Aajy Rixqegoph ST-40 Max. Sheet Size: 350 × 500 mm Min. Sheet Size: 182 × 128 mm Stacking Capacity: Approx. 360 mm

Condition: new, pressure: 100motor power: 4messurements (LxWxH): 1.600 x 850 x 2.500oil filling: 29performance of pump: 14,5speed: Vorlauf 8,5 mm/sec, Rücklauf 13,43 mm/secweight approx.: 1.000column width: 1000 x 350Standard Equipment: High-quality hydraulic press can be operated both manually and motorized. Cylinders can be shifted sideways. Fjdpfx Aaonzwhajgjph CE certified Pressure adjustment 1-year warranty Pressure gauge (manometer) User manual (manual) Option :  Clearopening -> 1200 x 400 mm (750 ¤ extra)