Used Hot Former for sale (4,540)

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope 5.4.2 Configurable In- and Outputs Ledoiu Smbspfx Ahajah 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Condition: used, Year of construction: 2022, 1 set of warning signs electric lighting freewheel drive shaft 1 set of tandem axle / with wheel 16/6.50-8 / Lasdpfx Ast Dxn Eohaeh

Condition: used, Year of construction: 2022, 1 set of warning signs electric lighting 1 set of tandem axle with wheel 16/6.50-8 / hydr. folding swath cloth Standard PTO shaft / Laedpfxjt Dxpio Ahajh

Condition: used, Year of construction: 2024, Three-point linkage Caster wheel 15/6.00-6 (balloon mounted) 1 set of tandem axle / with wheel 16/6.50-8 Hydr. folding swath cloth Set of warning signs with LED / lighting Standard PTO shaft / Lsdpfx Ahst Eay Ssasah

Year of construction: 2025, condition: new, ASK - 0 Hanger Type Shot Blasting Machine; It is used for polishing sheet and metal parts which have come out of press and heat treatment, cleaning and roughening of castings, preparation before paint and rubber coating, taking forging parts to canvases and revision of old parts. (Quantity x Diameter): Ø: 800 H: 700 has 2 turbine x Ø 325mm with 6 blades The cabin is made of ST-37 sheet metal and the hot pot area is supported by Brinell or Manganese wear plate. The interior of the cabinet is covered with a rubber sheet to prevent it from being exposed to abrasion due to the sandblasting process. Rubber sheets are fixed to the cabinet with moldings. (Coating with a complete manganese armor is optionally offered to our customers.) The wear plate cladding is screw-in design for future wear-based replacements. It can be easily changed by authorized personnel in your company. Lodpfx Asvkf Agshasah Although the cabin door can be pneumatic or manual, it is designed as a winged system and 2 pieces. The cabinet door has a lock system to prevent it from being opened during the blasting process. In addition, there is a sensor or switch on the cabinet that stops sandblasting when the door is open. The system consisting of rail line, suspension gear system and crane (optional) is designed to allow the material to be sanded to move easily inside the machine. Full automation panel is available. Panel materials are Siemens / Schineider brand. Machine control is provided with a 10” PLC screen.

Condition: excellent (used), Year of construction: 2007, Mold Masters Hotrunner external 3 zones Hotrunner TMXL-3/3-0 We have available Laedsvax Izjpfx Ahaoh 7 units

Condition: excellent (used), machine/vehicle number: 3.278-870805-1, Part No.: 42.35.53 Laedjh Eii Tepfx Ahajh Technical data and description: see pictures

Condition: excellent (used), Very well maintained blood analyzer type Reflotron IV of the world brand Roche, wave range: 567-951 nm. Laedpfx Asq Stvuehajh The device has a printer interface and connection for keyboard, and is supplied with the accessories shown. All devices were manufactured in Germany and used very little by federal companies, condition is optically and technically flawless. The following measurements can be carried out with the Reflotron system: - Glucose - cholesterol - triglycerides - HDL cholesterol - GPT (ALAT) - GOT (ASAT) - GGT (gamma-GT) - creatinine - urea - uric acid - Potassium - Alkaline phosphatase - Hemoglobin - Bilirubin - Creatine kinase (CK) - Amylase - Pancreatic amylase Scope of delivery: - Reflotron IV blood analyzer - Rack for accessories - Pipette for Reglotron IV - Applicator - Power supply unit - Manual German, English All components are in very good optical and technical condition and can be used immediately. Some discoloration on the housing is due to storage and does not limit the usability of the system in any way - see pictures. The system shown is for illustrative purposes only, all systems offered are in comparable condition. The sale is aimed exclusively at traders, you will of course receive an invoice with VAT shown. Private buyers have the opportunity to purchase the device "on behalf of a customer", a direct commercial sale to private individuals expressly does not take place! For professional use, the tests prescribed by the respective national law, such as STK / MTK, must be carried out. The goods are sold under exclusion of any warranty or liability for material defects. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health. If you have any queries, please contact us directly using the contact details provided.

Condition: used, Year of construction: 2023, Transport width 2.98m Tine arms 4x12 Hydraulic adjustment of / working height Conversion kit 5 tines for rear rotors Standard PTO shaft / standard wheels 550/45-22.5 Swath former Set of LED working lights / working width 10.0-12.50m Kre Lajdpfxorxtbuo Ahaeh

Condition: ready for operation (used), Schoppe & Faeser AEC 200 transducer, serial number as shown in the photo, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lasdpfei Ec Ibsx Ahaoh

Year of construction: 2021, condition: new, Fiber delivery cable with instalation ( splicing )on your IPG, Maxphotonic , Raycus, GW.... laser source. We are doing reparation IPG laser module in your place with warranty. Speaking English and Serbian language. Lodpfog D Urgox Ahaeah

Condition: used, hot runner control device PSG NR 4 06 6 x fach 220 V Lasdpfxog Htcve Ahash price: 1.450 Euro contact: Mr. Rainer Eckerle

Condition: new, Year of construction: 2025, Trough belt, impeller wheel, shot blasting system, 11 kW, directly driven impeller turbine with 8 throwing blades. Belt width 1000 mm and diameter 900 mm. Lsdpfx Ahehvikueaoah

Condition: good (used), AFT Lsdpfjfv Spvox Ahaoah Single shot depositor Stainless height adjustable frame, 25Kg hopper, fill range 25g - 100g, mobile, 1Ph

Year of construction: 2025, condition: new, KDT-03 Trimming Machine 380V Laodpfjfwmvhex Ahaoh Grooving machine – 380V powered electric grooving machine, equipped with a foot pedal with an emergency switch, has a retractable lower shaft. Includes 6 sets stones shown in the picture. Easy and convenient machine operation. Technical specifications Range of processed sheet metal: 1.2 mm Roller diameter: 62mm Dimensions length height: 900x450x1350 (mm) Weight: 135kg

Condition: new, Year of construction: 2025, Mechanical sheet metal guillotine Lodpfx Ajfwmydjhaoah METFORMER HCO-2x2000mm The guillotine is made entirely of steel, the structure is solid and heavy. Simple design with good looks. It is easy to use. This guillotine is widely used for cutting thin and medium steel sheets in light engineering, hardware manufacturing. The blade is made of a super strong steel alloy. Technical data: Model, HCO-2x2000, Engine power, kw, 3.0, Maximum sheet thickness (mm), mm, 2, Number of knife changes, pcs, 4, Length, mm, 2800, Width, mm, 1260, Height, mm, 1300, Weight, kg, 1350,

Condition: new, Year of construction: 2025, MDPE-1 SPOT WELDER portable 1 kVA High-performance transformer 2 levels of power regulation Electronic current and time control Lasdpfx Ahsf Eyvvoash Possibility to work with 230V power supply The range of welded sheets: to 1 + 1 mm Width: 110mm Length: 460mm Height: 300mm Weight: 12,5kg Power supply: 230V

Year of construction: 2018, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: M iClean HM mit GIO, Our 10 Meiko pot washers with the model designation DV 80.2 PW and built in 2015 2016 are for sale. Condition good, ran partly with soft water. These machines are former leasing devices. With 6 months spare parts guarantee. Preventive maintenance was always carried out with the replacement of some wearing parts. Inspection and test run on site possible and desired. Technical specifications: Performance up to 60/40/17 baskets (corresponds to approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program run times: 60/90/210 seconds Basket dimensions in mm: 500 x 500 Insertion height: 440 mm Tank capacity: 22 l Water consumption per basket: 2.6 l Tank heater: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Lajdpfepy Dxrex Ahajh Material: stainless steel Connected load: 400 V / 11.2 kW (cold), 9.7 (warm) Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical installation: Electrical connection: three-phase current 3 NPE, 400 V, 50 Hz. The circuit corresponds to the regulations of the VDE Water installation: The dishwashers can be connected to the fresh water network without the interposition of safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. The installation regulation EN 1717 must be observed. expiry ¾ ̋. On-site wall drain max. 700 mm high. Length of the connection lines approx. 1.8 m from the dishwasher. Collection of the machines desired. Dispatch by freight forwarder at cost assumption possible.

Condition: repair required (used), 616 USED Canol line for the production of: hamburgers, hot dogs, pizzas, hot dogs, lavash, pinsa, ciabatta. It has the appropriate equipment for the above-mentioned products. The machine requires renovation. Ljdpjncfgdefx Ahajah EXTERNAL DIMENSIONS (in cm): - L: 970, - W: 100 - H: 193. EQUIPMENT: - sprinkling flour under the dough - cutting station - rolling station, pressing (connecting doughs) - grain sprinkling station - guillotine with different cookie patterns to cut out - scrap removal station - sheet stacking station The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Dqz0Jh Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Year of construction: 2025, condition: new, SPIRAL PIPE MACHINE Metformer MTR1500 is intended for the production of round ducts of the SPIRAL type. The produced channel complies with the DIN EN 12237. Device for uncoiling a sheet of metal strip with a vertically adjustable brake Forming strips for the production of pipes Fast, burr-free cutting thanks to circular cutting knives Control from the LCD touch screen Essential Automatic Lubrication System Automatic angle control automatic shear during pipe production Remote access and control Reporting system (production quantity daily-weekly-monthly) Automatic error detection, Ljdep T Smlepfx Ahaoah Engine power 10.5 kW (smooth regulation) ELECTRICITY 380V / 3PH 50 / 60HZ AIR PRESSURE 6-8 BAR HYDRAULIC OIL AMOUNT 10L + 6L CALCULATED SHEET THICKNESS (GALVANIZED) 0.5-1.2 CALCULATED SHEET THICKNESS (CHROME) 0.4-0.7 DIAMETER RANGE 100-1250 MM PLATE WIDTH TO USE 137MM PRODUCT SIZE 250MM-3000MM (option 6000MM) MACHINE DIMENSIONS 1600 (W) 2400 (HEIGHT) X3050 (Length) COFFEE TABLE 3Mx 1 pcs. (OPTION 3Mx2 pcs.) MACHINE WEIGHT 1950kg STANDARD DIMENSIONS: Ø125, Ø150, Ø160, Ø180, Ø200, Ø224, Ø250, Ø280, Ø300, Ø315, Ø350, Ø400, Ø450, Ø500, Ø560, Ø600, Ø630, Ø700, Ø710, Ø1125.1000, Ø900 Ø1250

Year of construction: 2026, condition: new, Machine height : ~4300mm Machine width : ~3400mm Machine length : ~3400mm Maximum work piece height : 1400mm Maximum hook capacity : 2 x 500 kg Number of blast wheels : 2 x 7.5kW E-Eco Frequency inverter for turbine : 2 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + TP 7'' Modem : 1 pc Safety fance with fotocell : Yes Laedsi D Digopfx Ahaeh Automatic abrasive filling : Da Filter : PC4 (4.000m3/h) Total installed power : ~21kW This type of machine has all the electric cables on quick connectors, you only need three days and 2 mechanics.to prepare it for work. The machine is on stock. A test of the machine in our premises is possible with prior notice

Condition: new, Year of construction: 2025, Complete vertical packaging system for dosing coffee beans AND ground coffee and packaging in coffee stand-up pouches with aroma valve. The system is equipped with two separate dosing systems (auger filler for powder, volumetric cup dosing unit for granules) and also has a Z-conveyor, screw conveyor, outfeed conveyor and an AMTEC PRO P60L as VFFS packaging machine. A hot stamping printer for date, batch number (optional: thermal transfer printer on request), an anti-static module, stand-up pouch module (gusset device) and flat-bottom module (bottom seam is applied tightly to bottom, depending on the film material) are also part of the equipment. - Specifications VFFS: Stable film pulling by vacuum; MITSUBISHI/SIEMENS PLC, WEINVIEW touch screen operator interface; mark sensor registration control; quick change former assembly, pneumatic sealing unit; servo motor film pulling; bag size: L(100-300)xW(80-240)mm; max. speed of the machine in neutral: 60 cycles/minute; stainless steel; 220V/3.5kW; 6bar, 0.36m³/min; machine dimensions: L1550xW1160xH1480mm; weight: 600/700kg. - Specifications volumetric dosing unit: 4 cups; perfect for free flowing granulate like products (rice, salt, sugar, etc.); stainless steel; dosing range: 80-2.000ml; max. speed of the machine in neutral: 60 cycles/minute; - Specifications: stainless steel; filling system with rotating screw; Servo motor; filling weight: 10-2000g; 50 liter filling hopper; accuracy: 0.5-2%; max. speed of the machine in neutral: 60 cycles/minute; airproof; damp pressure, side opening hopper, including dust collector. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Lsdsv Nmh Ispfx Ahaoah

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NM-FF2026, Equipment: CE marking, Frozen fish weighing dispenser integrated into the fish feeding, sorting, 10 kg weighing and packaging line. Designed for installation in the customer's premises, taking into account the dimensions and ceiling height. Multi-head dosing device MBP 14C2 EW 60. Number of heads: 14 pcs. Weighing type: weight sensors. Weighing accuracy: 0.1 – 1.5 gr. Pocket volume: 5 liters. Ljdpfx Ahsv Dit Noajah Dosing in one cycle: max. 4000 gr. Pocket opening type: from two sides. Nominal speed: up to 180 cycles/min. Pocket drive: stepper motors. Air dehumidifier: above 0 degrees. Electricity AC 240V, 50 Hz, Consumption 1.0 kW; Equipment weight: 800 kg. Machine dimensions: 2600 x 2600 x 1450 mm (for clarification) Control: 12.1 ” touch-sensitive display. Number of programs: up to 99. Room temperature range: from 0 C to + 40 C; External vibration compensation: 4 built-in load sensors for external vibration compensation. Protection class: IP 66, condensation-resistant, completely washable Automatic zeroing: Yes. Self-diagnostics: Yes. Remote diagnostics: Yes. RCU cable. Conformity: CE. -Flow Pack type packaging machine PFM Zenith EW Servo. Equipment for forming pre-cut packages from a film roll. Packaging data: −Package width 100 - 320 mm. −Package length 80 - 400 mm. −Max. package volume 6 liters. −Max. roll width 700 mm. −Film roll diameter max. 350 mm. Mechanical speed: up to 90 cycles per minute. The actual speed will be specified after tests with real product and packaging material. THE BASIC SET OF THE MACHINE INCLUDES: The machine frame, electrical cabinet, melting jaws, vertical melter support made of stainless steel. Roll holder with centering cones. One forming tube made of stainless steel for pillow-type packaging (diameter optional). Photo sensor for printed film and encoder for determining the length of the package. Vacuum belts for film feeding. Machine version with a slope for product and packaging safety. Product holding mechanism before jaws. Packaging support. Vertical seam sealing bar with pneumatic drive. Machine functions are controlled via PLC Siemens. Photo sensor for working with printed film. Possibility to save up to 99 different programs. Machine control via touch sensitive panel 12.2". Machine self-diagnosis. Notes: The machine is designed to work with hot jaws MACHINE DIMENSIONS (base model): Height: 1600 mm. Width: 1280 mm. Depth: 2200 mm. Weight 550Kg. Air consumption: 350 NL/minute. Electricity consumption: 4 Kw. Connection: 400 V. 3 Ph. - 50 Hz. 2. Multifunctional line, in accordance with the requirements and premises of the customer. Designed for feeding fish from IFQ, sorting, accumulating in containers, as needed, weighing 10 kg, forming cardboard boxes and feeding tilted boxes to sealing and pallets. The line consists of: - c) Feed conveyor to weighing 10 kg - d) Reversible conveyor for feeding filled boxes to sealing - e) Reversible conveyor with control from scales with two weighing places - f) Roller, gravity, conveyor for feeding empty boxes to 10 kg weighing places - g) Roller conveyor for feeding empty boxes to the 1kg packing table - h) Work table for packing 1kg packages into boxes - i) Rotary table for accumulating 1kg packages - j) Product feed conveyor to the MFG - k) Conveyor for feeding products from the MFG to the packer - l) Conveyor for feeding 1kg packages to the Rotary table - m) carton former, automatic - n) carton sealer -p) Xray

Condition: good (used), functionality: fully functional, Processing plant for (track) ballast 40 cbm feed hopper with push cart OMT 120 kW impact mill with feed and discharge chute Laedpotpamgofx Ahaeh Double-deck screening plant 1,400 x 4,000 m with conveyor and stockpile belts Complete electrical installation

Year of construction: 2015, condition: used, Steven single shot depositor 100L stainless hopper, adjustable fill size on mobile stainless frame Ledpfx Ahodbqzdjaoah