Used Hurco Vmx 30 Hsi for sale (24,764)

Condition: used, Year of construction: 2023, surface area 1168 x 508 mm max. table load 1800 kg travel -x axis 1016 mm travel -y axis 508 mm travel -z axis 508 mm spindle taper SK40 spindle speed 10000 U/min spindle capacity 15 kW spindle torque max. 99 Nm Iedsza Hqnspfx Anyotk rapid traverse y/x/z axis 28 m/min control HURCO MAX5 total power requirement 20 kW weight of the machine ca. 4,15 t dimensions of the machine ca. 3,7 x 3,3 x 2,5 m The machine is like new !!!, only 61 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 360 mm - Max. tool weight: 7 kg Accessories: documentation

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 402 mm, turning length: 758 mm, turning diameter: 450 mm, spindle speed (max.): 3,000 rpm, turning diameter over bed slide: 582 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 450 mm Maximum turning length: 758 mm Diameter of rotation over the bed: 582 mm Diameter of rotation over the cross slide: 402 mm Spindle speed: 3,000 rpm Maximum spindle torque: 351 Nm Distance between centers: 744 mm Bar diameter: 81 mm Chuck size: 260 mm (10") Maximum bar diameter: 40 mm Axes: X, Z Number of tool positions in the tool changer: 12 Tool shank size: 25 × 25 mm Iedpfxjzgt U Sj Anyetk Travel in the X-axis: 250 mm Travel in the Z-axis: 790 mm Rapid traverse rate in the X/Z direction: 30 m/min MACHINE DETAILS Control model: Hurco WinMax Spindle power: 22 kW Power supply: 400 V / 50 Hz (market-dependent) Machine weight: approx. 5,000 kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, Controller MAX5 DSM (2 x 19" screens) Table size 762 x 406 mm X-axis travel 660 mm Y-axis travel 406 mm Z-axis travel 508 mm Ijdpfxey Du I Ro Anyotk Spindle speed 10 – 12000 rpm Tool magazine 20 positions Tool holder SK40 Rapid traverse X/Y/Z 28 m/min Power 9,4/11 kW Footprint 2000 x 1800 x 2600 mm Machine weight 2850 kgs Accessories - Software options: 3D, DXF, AVG (realistic graphics), pockets/islands, ramp function, rigid tapping, cutting, tool and material database, NCPP and ISNC (macro ISO code programming), Ultimotion - MPG - Coolant water system - Chip auger - Signal light - Machine feet

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h Ijdpfx Aszbmzvonyetk spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: not inspected (used), Year of construction: 2000, travel distance X-axis: 610 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 510 mm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, Ultimax control system Table: 760 x 400 mm Travel: 610 x 405 x 510 mm Tool changer: 24 tools Maximum spindle speed: 8,000 rpm Weight: 4,000 kg Itsdpfxjy T Ekbj Anyek

Year of construction: 2004, condition: ready for operation (used), X-axis: 660mm, y-axis: 350mm, z-axis: 450mm, table clamping surface dimensions: 762x356mm, speed: 10-10,000/min, tool holder: SK 40 DIN 69871, number of tool changer stations: 20, rapid traverse: 28m/min, control: ULTIMAX 4, length: 2000mm, width: 1800mm, height: 2660mm, weight: 2.9t, with documentation, documents, hydraulic diagram and electrical circuit diagram. An on-site inspection is possible. Ijdjztzq Uepfx Anyjtk

Condition: used, Year of construction: 2015, functionality: fully functional, Travel distances X-axis travel: 290 mm Z-axis travel: 560 mm W-axis travel: 640 mm Y-axis travel: ±55 mm Main Spindle Main spindle power: 28 kW Main spindle torque: 242 Nm Spindle nose: A2-6 Bar capacity: 64 mm Max. swing diameter: 508 mm Chuck diameter: 203 mm Spindle speed: 4,500 rpm Feedrates X-axis feedrate: 24 m/min Z-axis feedrate: 30 m/min W-axis feedrate: 30 m/min Y-axis feedrate: 12 m/min Turret Turret: 12 stations Tool holders: VDI40 Max. boring bar diameter: 40 mm Shank cross-section: 25×25 mm Driven Tools Driven tool speed: 4,000 rpm Driven tool power: 5.4 kW Driven tool torque: 24 Nm Index time: 0.16 s Sub Spindle Sub spindle max. speed: 6,000 rpm Sub spindle torque: 70 Nm MACHINE DETAILS Electrical connection values: 66 kVA / 95 A / 400 V Pneumatic connection values: 7 bar / 150 l/min Weight: 7,000 kg Operating hours Power-on hours: 60,496 h Spindle hours: 19,299 h EQUIPMENT Bar feeder IRCO/Breuning SIMAG 80.1-2R-3000 Various channels Chip conveyor Tool measurement arm (Tool Setter) Transformer Cooling unit Ijdpfxsy Dgfbe Anyetk Coolant tank Fixed and driven tool holders Replacement main spindle (unrefurbished) Various collet chucks, size 65 Documentation (circuit diagrams, operator's manual, etc.)

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 661 mm, travel distance Y-axis: 407 mm, travel distance Z-axis: 508 mm, table load: 1,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, tool weight: 7,000 g, number of axes: 3, This 3-axis Hurco VM10i was manufactured in 2016. It features an X-axis travel of 661 mm, Y-axis travel of 407 mm, and Z-axis travel of 508 mm. The machine includes a robust table size of 762 x 406 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VM10i vertical machining centre we have for sale. Contact us for further details. • CNC Control: HURCO MAX 5 (WinMax software version V10.01.131.12) • Table Dimensions: 762 x 406 mm • T-Slots: 3 x 18 mm • T-Slot Center Distance: 10 mm • Spindle Nose to Table Distance: 102 - 610 mm • Spindle Torque: 72 Nm • Rapid Traverse (X/Y/Z): 28,000 mm/min • Tool Magazine Capacity: 24 positions • Maximum Tool Diameter (Adjacent Occupied): 80 mm • Maximum Tool Diameter (Adjacent Empty): 120 mm • Maximum Tool Length: 250 mm • Machine Working Hours: 15,420 h 10 min • Spindle Hours: 2,727 h 59 min Itjdpfx Ajzgf Htsnyok • Monitor: 19" Touch Screen • Hardware: 128 GB SSD, 4 GB RAM, Dual-Core 2.7 GHz Processor • Connectivity: 2x USB 2.0 (console), 2x USB (electrical cabinet), 1x Ethernet LAN Additional equipment • Remote electronic handwheel • Auger-type chip conveyor • Wash gun (water/air) • Status tower lamp • Retention knobs • Leveling pads Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2007, x-travel 660 mm y-travel 350 mm Itedjzrh Rlepfx Anysk z-travel 450 mm Control Ultimax In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine is operational. The X-axis ball screw is making noise and should be replaced soon. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 820 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, General Control: Max 5 Year of manufacture: 2023 Working Area Travel X: 820 mm Travel Y: 550 mm Travel Z: 500 mm Travel B: +110° / -110° Travel C: 360° Tool changer: 60 stations Rapid traverse X/Y/Z: 36 / 36 / 36 m/min Spindle Speed: 12,000 rpm Power: 16 kW Tool holder: SK40 NC Rotary Table Clamping surface L x W: 600 x 600 mm Spindle nose to table: 150 - 650 mm Table load capacity: 350 kg Equipment Chip conveyor Coolant supply Direct path measuring system Itjdjyap Tfepfx Anyjk Through-spindle air 5-axis simultaneous capability Workpiece measurement Tool measurement High-pressure coolant (IKZ)

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Ijdpfx Aowuzzronyetk Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Itsdpfx Anszubtleyok Further technical documents and documentation for the system are available and can be provided upon request.

Condition: new, Year of construction: 2026, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 18,000 rpm, table load: 11,000 kg, workpiece weight (max.): 11,000 kg, rotational speed (max.): 18,000 rpm, controller model: MAX 5, coolant supply: 40 bar, We are offering the following machine for sale directly on behalf of the owner. It was delivered in 2026, but due to changed requirements, it will not be used. The machine is in its original packaging and has not been used. 5-axis CNC portal milling machine, new Manufacturer: HURCO Type: DCX 32-5 Si Year of manufacture: 2025, delivery 3/2026 Control: MAX 5, 2 screens TRAVEL RANGES X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal columns: 2,130 mm Distance spindle nose – table: 66 – 966 mm SPINDLE / HEAD Swivel head CYTEC Tool interface: HSK63-A Speed max.: 18,000 rpm Power: 63 kW Torque max.: 106 Nm Rapid traverse: 15/15/10 m/min Tool changer / ATC: 60 positions EQUIPMENT: - Internal cooling through spindle, 40 bar - KNOLL band filter system - KNOLL chip conveyor - Direct path measuring system X/Y/Z - Workpiece probe RENISHAW RMP600 - Tool measurement: RENISHAW NC4 - Calibration sphere - Rotoclear - RITTAL spindle cooler - Enclosed protective cabin - LED work area lighting - Signal light - Coolant spray gun SOFTWARE OPTIONS: - Simultaneous 5-axis machining - Dialog / NC Mix - FANUC-compatible NC mode - Macro programming - Ulti Motion (10,000 block look-ahead) - STEP and DXF import - Automatic pocket and island detection - Multi-touch Itodpfozu Nz Dsx Anyjk SERVICES: - Warranty extension + 12 months - Commissioning by HURCO (including in Germany) MACHINE DIMENSIONS Footprint: approx. 9,982 × 6,815 mm Height: approx. 5,250 mm Machine weight: approx. 37,700 kg (transport approx. 45 t)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 10,000 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco VM20i was manufactured in 2014. It features an X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 400 mm. The machine includes a table size of 1,170 x 507 mm and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VM20i vertical machining centre we have for sale. Contact us for further details. • Control: WINMAX Iodpfxjzc If Sj Anyjtk • Clamping System: SK40 DIN69871 AD/B • Tool Holder: SK40 • Table Size: 1,170 x 507 mm • Spindle Hours: Approx. 10,000 h • Condition: Used • CE Marking: Yes • Frequency: 50 Hz • Voltage: 400 V • Power Supply: 3 Phase • Largest Motor: 13 kVA • Full Load: 20 kVA • Interrupt Capacity: 10,000 A • Short Circuit Current: 22 kA RMS Symmetrical • Maximum Ambient Temperature: 35 °C Technical Specification Through-spindle Coolant No

Condition: used, Year of construction: 2011, operating hours: 5,000 h, machine/vehicle number: M344Z16201031AHC, travel distance X-axis: 2,032 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table load: 2,700 kg, spindle speed (max.): 12,000 rpm, The following repairs were carried out: Defective inverter identified and replaced Bearings in the Y-axis replaced; bearing set VTXZ Y-axis (5 pieces 35x72) Coolant system adjusted Orientation adjusted TECHNICAL DETAILS Travel range X-axis: 2,032 mm Travel range Y-axis: 660 mm Travel range Z-axis: 610 mm Spindle speed: 12,000 rpm Spindle cooling: Internal cooling Rapid traverse rate X/Y/Z: 35 m/min Power: 18 kW Tool holder: SK 40 Tool positions: 40 Tool diameter at full capacity: 75 mm Maximum tool weight: 10 kg Maximum tool length: 300 mm Table load: 2,700 kg Table clamping area: 2,285 x 660 mm T-slots in table according to DIN 650: 5 Slot width: 18 mm H8 Slot spacing: 125 mm Positional accuracy X, Y, Z: 0.02 mm Repeatability X, Y, Z: 0.01 mm MACHINE DETAILS Footprint W x D x H, doors open / with control / chip conveyor: 6,950 x 5,150 x 3,700 mm Transport weight: 20,000 kg Machine weight: 18,000 kg Operating hours Machine hours: 11,417 hrs Spindle hours: approx. 5,000 hrs The following items are not included in the scope of delivery: vices, tools, extraction system, tool cart. Itjdpfx Anozka Hioyek Further technical data can be found in the attached documents.

Condition: good (used), Year of construction: 2004, operating hours: 6,900 h, functionality: fully functional, Controller: ULTIMAX4 DSM with LCD screens Table dimensions: 762 x 355 mm X-axis travel: 660 mm Y-axis travel: 355 mm Z-axis travel: 455 mm Spindle speed: 10 – 10000 rpm Spindle taper: SK40 Ijdpfx Ajzmhy Asnyjtk Tool changer: 16-station Main drive power: 11 / 9.4 kW Machine weight: 2800 kg Machine dimensions: 1800 x 1600 x 2500 mm Accessories: - Software version 2.37 with English user interface - Software options: Rigid tapping, Pockets/Islands, AVC, Helical/Ramp, ULTINET (Network) - Coolant system - Signal lamp - USB interface - Portable electronic handwheel - Machine feet The machine is in good used condition. Still under power. It is being sold due to company liquidation.

Condition: used, Year of construction: 2016, operating hours: 762 h, functionality: fully functional, machine/vehicle number: 10022447, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, KUKA KR 30-3 robotic workstation with KRC4 controller and SmartPad. Operating time: only 762 hours. For sale: a complete robotic workstation based on the KUKA KR 30-3 industrial robot, equipped with a KRC4 controller and a KUKA SmartPad operator panel. The unit comes from a research and development laboratory and was used for testing and industrial automation projects. As a result, the robot has very low operating hours, totaling only 762 hours. This workstation is an ideal solution for system integrators, technical universities, R&D departments, and companies implementing automation and robotics solutions for processes. Technical data: Manufacturer: KUKA Model: KR 30-3 Year of manufacture: 2016 Payload: 30 kg Ijdpfsziciwex Anystk Reach: 2033 mm Controller: KUKA KRC4 Operator panel: KUKA SmartPad Operating time: 762 h Controller power supply: 3x400 V Installed software options: EthernetKRL Profinet KRC-Nexxt RemoteService RobotSensorInterface Technical condition: The robot starts up correctly, and communication with the controller works properly. The visual condition is very good. The unit comes from a research and development project and has not been used in continuous industrial production. Included: KUKA KR 30-3 robot KRC4 controller KUKA SmartPad operator panel Cabling as shown in the pictures Additional information: The workstation can be expanded with: - pneumatic or electric grippers, - vision systems, - safety fences, - safety gates, - light curtains, - additional industrial automation equipment. More products are available at tobesold.eu. Before shipment, the unit undergoes technical verification. A demonstration of the unit's operation is available by prior appointment.

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 650 mm, spindle bore: 106 mm, turning length: 2,130 mm, turning diameter: 650 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 4,290 mm, total width: 2,553 mm, total height: 2,375 mm, type of input current: three-phase, spindle motor power: 11,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 400 V, drill spindle diameter: 106 mm, nominal power (apparent): 20 kVA, number of spindles: 1, spindle nose: A1-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine: EUR 119,500.00!!!!! The machine is immediately available and NEW. Delivery of the machine in overseas packaging from our warehouse. (Transport of the machine at the buyer’s expense) Operating materials to be provided by the buyer. Commissioning and training by Milltronics: EUR 5,000.00 Leasing possible (subject to creditworthiness) Machine Details: • CNC control Milltronics 9000-DGI • 15" LCD color touchscreen • Ethernet interface • USB interface • Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI Desktop • Connection for external keyboard • Electronic handwheels for manual operation, teaching, or automatic sequences • Custom macros available • Override potentiometers for axes and spindle • Spindle load monitoring • Key switch to lock EDIT function • Lights to indicate operating status • Additional “M” function with CNC wait channel • Constant cutting speed • Rigid tapping • Spindle speed 30 – 1,600 rpm • Spindle motor 18 / 11 kW, 2-stage electronic gearbox • Spindle nose type A1-11 • Tool turret with 8 positions 25 mm • One axial tool holder for standard tools 25 mm x 25 mm • One tool holder for boring bars 38 mm • Automatic lubrication system • Full enclosure with sliding doors • Coolant system with pump • CE certification • Instruction manual, spare parts list and circuit diagrams in digital format • Operating manual and maintenance manual in digital format • Transformer for standard industrial power supply 400 volts, 3 phase • Lifting brackets for crane transport Optional accessories: Ijdpfeztrkljx Anyjtk Manual 3-jaw chuck 300 mm Hydraulic tailstock quill (only in combination with hydraulic chuck) Hydraulic 3-jaw chuck with hydraulic unit (diameter 300 mm – bore 70 mm) Fixed steady rest with rollers, range 20 – 200 mm Fixed steady rest with rollers, range 180 – 410 mm Travelling steady rest with brass pads, range 20 mm - 200 mm 38 mm boring bar holder for turret 25 mm axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Foot mat with Milltronics logo

Condition: used, functionality: limited functionality, Year of construction: 2009, operating hours: 14,021 h, machine/vehicle number: 09528020, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Omron, working width: 3,040 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, stroke rate (max.): 12 1/min, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge speed R-axis: 330 mm/s, input voltage: 400 V, input current: 17 A, type of input current: three-phase, overall weight: 5,960 kg, total length: 3,706 mm, total width: 1,355 mm, total height: 1,955 mm, year of last overhaul: 2021, Equipment: centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, FASTI 528-30/6 hydraulic guillotine shear usable length 3040mm Year of manufacture 2009, demonstration unit purchased in 12/2011 Max. sheet thickness at 400 N/mm2: 4.0mm Max. sheet thickness at 700 N/mm2: 6.0mm CNC control FM5.1 additional blade for re-sharpening Machine serviced by the manufacturer's service department Iodpfezi Uq Hjx Anystk Machine in good working order, in continuous use, minor oil leak on the right cylinder Machine for sale due to a change in the machine park

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, For sale is a vertical 3-axis CNC machining center, Hurco BMC20, with Hurco Ultimax control. The machine is ideally suited for toolmaking, single-part production, and small batch sizes. Technical data: Control: Hurco Ultimax Travel in X: approx. 560 mm Travel in Y: approx. 355 mm Travel in Z: approx. 355 mm Table size: approx. 760 × 355 mm Tool holder: SK40 / CAT40 Spindle speed up to 6000 rpm 16-tool automatic tool changer Main motor: approx. 7.5–10 HP Rapid traverse: approx. 10 m/min Machine weight: approx. 2800–3200 kg Equipment: - various accessories Condition: Iedpjy T Hkpofx Anyetk used Machine is complete Inspection possible while powered on

Condition: used, Year of construction: 2009, machine/vehicle number: PRJ 040485, functionality: fully functional, rotational speed (max.): 4,300 rpm, rotational speed (min.): 225 rpm, overall weight: 260 kg, Equipment: CE marking, The ALZMETALL ALZSTAR 30/S is a robust, precise, and durable pillar drilling machine, particularly suitable for craft businesses, training workshops, and industrial workshops. It belongs to Alzmetall's more price-sensitive "Start-Up" series but still offers the manufacturer's accustomed industrial quality. Isdpezdqdlofx Anyetk Here are the most important technical data and features at a glance: Technical Data Feature Value / Specification Drilling capacity (in steel St 60) 30 mm Drilling capacity (in cast iron GG 20) 30 mm Thread cutting max. M 16 (steel) / M 20 (cast iron) Spindle mount MK 3 (short spindle) Spindle stroke (Z-axis) 140 mm Overhang 293 mm Column diameter 115 mm Machine table (support surface) 515 x 360 mm (with T-slots) Distance spindle - table min. 132 mm / max. 724 mm Feed By hand Motor power 1.0 / 1.6 kW Spindle speed (stepless) Depending on the option: 225 – 4,300 rpm or 100 – 1,800 rpm Machine weight approx. 260 kg Standard equipment & highlights Stepless speed adjustment: The speed can be adjusted steplessly using a mechanical variator, allowing for optimal adaptation to the respective material and drill diameter. Digital speed display: The current spindle speed is displayed clearly on the front of the machine. Thread cutting device: An integrated reversing switch enables quick switching between right-hand and left-hand rotation. Safety: The machine is equipped as standard with a locking mushroom-head push button for EMERGENCY STOP, a motor protection switch, and an electrically secured spindle guard. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, overall weight: 1,750 kg, rotor diameter: 250 mm, rotor length: 600 mm, power: 30 kW (40.79 HP), Pre-shredder: 1 unit Forrec AE 600/30 single-shaft shredder: - Drive: 30 kW - Dimensions: 2,250 x 3,050 x 1,600 mm - Rotor diameter: ø 250 mm - Hopper dimensions: 1100 x 1000 mm - Hopper capacity: 750 liters - Production: 600 kg/hour (mixed cables) - Weight: 1,750 kg - 1 set of original Forrec spare parts Accessories: - Electric lift table for material feeding - Conveyor belt for shredded material discharge - Metal platform for material feeding The machine has been disassembled and is in storage. Therefore, a functional test is not possible. Pickup only in 14727 Premnitz. Itodpfxjztaurj Anyjk

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 10056 196, number of rollers: 3, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, overall weight: 34,000 kg, Haeusler hydraulic roller, type RMA 2500/30. Machine in good working condition. Itsdpjzutixefx Anyek Capacity: 30 mm steel x 2500 mm.

Condition: good (used), Year of construction: 2016, Table size 3000 x 1700mm, Traverses X Y Z 3200 x 2100 x 920mm, Table load 11,000kgs, spindle nose to table 164 – 1084 mm, Iodpfx Anjwu Dlaoystk spindle bored Din 50, spindle speed 6000 rpm, 40 station ATC, Hurco Winmax 5 control. swarf conveyor

Condition: used, Year of construction: 2005, operating hours: 11,800 h, functionality: fully functional, spindle bore: 41 mm, turning length: 750 mm, turning diameter: 330 mm, turning diameter over bed slide: 435 mm, quill diameter: 50 mm, center height: 165 mm, spindle speed (max.): 4,500 rpm, spindle motor power: 11,000 W, overall weight: 1,400 kg, Equipment: rotational speed infinitely variable, Description For sale is a cycle-controlled WEILER E30X750 CNC lathe with a Siemens 810 D control system. Manufacturer/Model: WEILER E30x750 Isdpfx Aozbybvsnyotk Year of manufacture: 2005 Control system: Siemens 810 D Condition: good, fully functional Location: near Munich Inspection: on-site or via video call by arrangement Pictures/Video: Further pictures and videos of the running machine will be provided upon request. Technical data: Working area: Center height: 165 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 160 mm Distance between centers: 750 mm Turret: Turret head DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter in the front bearing: 70 mm Max. torque on the turret: 180 Nm Main drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 min⁻¹ Number of speeds: continuously variable Feed / Rapid traverse Feed drive: Three-phase AC feed drives Feed range (continuously variable): longitudinal: 0.001–50 mm/rev (Note: additionally specified 0–20 mm/rev) transverse: 0.001–50 mm/rev Feed force: longitudinal: 6,000 N transverse: 3,000 N Max. rapid traverse speed longitudinal/transverse: 8 / 4 m/min (Note: additionally specified 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 threads/inch Tailstock / Quill: Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Dimensions / Weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Interested? Contact us for further information and to arrange an inspection appointment. Provider MT EVO, Puch bei Salzburg