Used Husmann Compactor for sale (472)

Condition: used, HSM 4012 Automatic Baler Pressing force: 45 tons Motor power: 15 kW Power supply: 400 V / 50 Hz Itedpsv Ak Dgjfx Abbof Bale dimensions: approx. 900 × 720 × 600–1200 mm Bale cross-section W x H: 900 x 720 mm Tank capacity: 300 l Bale weight: up to 400 kg depending on material Tying: 3-fold automatic wire tying Loading opening: 820 × 1250 mm, suitable for continuous loading, e.g. by conveyor belt Machine dimensions and weight: approx. 6180 × 3190 × 2540 mm, weight: approx. 7–8 t Materials for baling: cardboard, paper, plastic films, light packaging waste The baler was serviced by HSM

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, power: 160 kW (217.54 HP), input voltage: 380 V, warranty duration: 12 months, year of last overhaul: 2023, Equipment: documentation/manual, 1 pellet press make: Buhler DPAB inner diameter die 660 mm tread die 138 mm Press is equipped with 1 motor 160 KW . Press door is made of Stainless steel with overload valve in door. 2 Roll press with 2 rolls on the press overhauled in dimple or racked version Press is complete with die lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Also new V-belts Isdpforah Evsx Abbotf Also, all safety devices will be observed and appropriate switches on Friction protection , door switch and inspection hatches will be fitted.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: M32961, year of last overhaul: 2025, Self-press container (skip), year of manufacture: 2015 Unladen weight: 2,500 kg Serial number: 31047, color: blue Last service: 05/2025, last UVV inspection: 05/2025 It was in active use until January 2026. The compactor has a top structure in which weighing technology was installed. This has been removed. Material is loaded into the compactor via the side door. The enclosure can be dismantled at any time by loosening the bolts. After that, the compactor is in its standard condition. Location: DE - 58730 Fröndenberg Iedpoyymraefx Abbstf

Condition: new, empty load weight: 2,030 kg, maximum load weight: 11,970 kg, overall weight: 14,000 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,800 mm, suspension: steel, tire size: 285 /70 R19,5, color: other, gearing type: other, front tire size: 285 /70 R19,5, rear tire size: 285 /70 R19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ZINCED, closed floor, skip according to DIN 30720 up to max. 15 cbm, or for ASK waste compactor, 2 x support, rear, loading height approx. 900 mm, toolbox, , surcharge for ramps 1.800 ¤ net, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ijdpfx Absyy Ur Uebjtf

Condition: excellent (used), Year of construction: 2023, operating hours: 12 h, functionality: fully functional, machine/vehicle number: 630207349, HSM V-Press 825 Plus Pro – barely used, only 16 bales pressed For sale is an HSM V-Press 825 Plus Pro in exceptionally low-use condition. Itodpfoyy Ddasx Abbef The machine has produced just 16 bales in total and is therefore practically as good as new. Ideal for businesses seeking a high-quality baler without paying the price of a new machine.

Condition: new, empty load weight: 2,030 kg, maximum load weight: 11,970 kg, overall weight: 14,000 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,800 mm, suspension: steel, tire size: 285 /70 R19,5, color: other, gearing type: other, front tire size: 285 /70 R19,5, rear tire size: 285 /70 R19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ZINCED, closed floor, skip according to DIN 30720 up to max. 15 cbm, or for ASK waste compactor, 2 x support, rear, loading height approx. 900 mm, toolbox, , surcharge for ramps 1.800 ¤ net, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ijdpfeyyzdwsx Abbjtf

Condition: new, empty load weight: 2,030 kg, maximum load weight: 11,970 kg, overall weight: 14,000 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,800 mm, suspension: steel, tire size: 285 /70 R19,5, color: other, gearing type: other, front tire size: 285 /70 R19,5, rear tire size: 285 /70 R19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ZINCED, closed floor, skip according to DIN 30720 up to max. 15 cbm, or for ASK waste compactor, 2 x support, rear, loading height approx. 900 mm, tool box, , surcharge for ramps 1,600 ¤ net, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Itsdjyyy U Uepfx Abbsf

Condition: new, Year of construction: 2026, Briquetting press NEM 900: production time appr. 5 months for briquetting aluminum chips Throughput: up to maximum 320 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Silo rollers: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Isdpfx Asgfm Ryjbbetf Hydraulic pre-compression via slide Main press cylinder Vertical cylinder Above for connecting a cooling unit . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, Presto HG20R Compactor container for roll-off trucks Iedox Svx Tjpfx Abbotf 3 units available 20 m³ usable volume Top-hinged discharge door Dual-sided hook uptake Split lid over the filling opening, opening left/right Prepared for ramp operation Machines are overhauled, checked, serviced, and repainted in the desired standard RAL color. We are happy to provide an offer including delivery. Images are reference photos of machines of the same type we have manufactured.

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2026, Plastic squeeze dryers are a vital part of plastic film washing lines. Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Itsdpfowg Sd Usx Abbjf Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Ijdpfxowg R Rtj Abbstf

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour. Iedpfxjwg Sgce Abbjtf

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: – HSM VK 8818 R-FU baler – Maintenance platform – Bale chute – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor – Transverse sliding belt conveyor – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. Itjdjyz Af Eepfx Abbsf We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97020-0010, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, power: 45 kW (61.18 HP), operating pressure: 250 bar, Equipment: documentation/manual, This baler is sold by Bollegraaf Recycling Solutions. This is a HBC80 baler (45kW) with cross wires. Bale press built: 1997 Baler Bollegraaf HBC80 45 kW Bale dimensions: 1100 x 720 mm 45 kW main motor Iedjxvh Dyjpfx Abbotf Intermediate hopper Conveyor chute Control cabinet Schneider PLC

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 305.537.1992, warranty duration: 12 months, Le Meccanica CLM630ST 630/150 die and rolls Force Feeder with a 0.9KW motor Iedpfxev Sq Rls Abbotf Currently undergoing full refurbishment - Seals &bearings included Colour - customers option Customer to arrange collection and freight

Condition: used, Year of construction: 2023, operating hours: 700 h, functionality: fully functional, machine/vehicle number: 3617, Model/Type: RUF 15/4000/70 Machine No.: 3617 Year of construction: 2023 Drive motor: 15 kW Throughput capacity up to max.: 450 kg/h (depending on material) Pressing pressure: approx. 4000 kg/cm² Briquette size: 70 mm Running hours: approx. 700 h Warranty: 12 months after delivery Availability: approx. 8 weeks after receipt of down payment Details: + Siemens TP 700, Siemens S7-1200 + Hopper extension with grid Itsdpst Sgrzsfx Abbjf + Electrical emulsion pump + Spraying device + Inspection door in hopper

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 9484, Husmann interchangeable container Iedpfjwcdr Njx Abbotf Unloading door / closing slide converted for a L&M KBW-TS

Condition: used, Year of construction: 2011, functionality: fully functional, Ludden & Mennekes interchangeable container Itsdewcdtgjpfx Abbjf Specially for paper/cardboard Compatible with Ludden & Mennekes KBW stationary press. This container has the opening at the container intake (front). The paper/cardboard is pressed into the container from the front. Because the container is conically constructed in the direction of the discharge door, the material can be emptied very easily. In contrast to 'standard' interchangeable containers, this makes unloading much easier.

Condition: new, empty load weight: 2,030 kg, maximum load weight: 11,970 kg, overall weight: 14,000 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,800 mm, suspension: steel, tire size: 285 /70 R19,5, color: other, gearing type: other, front tire size: 285 /70 R19,5, rear tire size: 285 /70 R19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ZINCED, closed floor, skip according to DIN 30720 up to max. 15 cbm, or for ASK waste compactor, 2 x support, rear, loading height approx. 900 mm, tool box, , surcharge for ramps 1,600 ¤ net, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Isdpeyxyufjfx Abbjtf

Condition: good (used), Year of construction: 2001, functionality: fully functional, KAMPWERTH SHD 1600 horizontal baler, incl. 3 interchangeable containers 48000x2800x3000 Paper baler // Waste baler // Refuse baler Baler, 1 unit • Type: Kampwerth SHD 1600 • Year of manufacture: 2001 Iedpfx Abjxm Skrobjtf • Unladen weight: 3,500 kg • 15 kW • Dimensions: 5000x2300x3700 mm (disassembled for transport) Container box for baler, 3 units • Year of manufacture: 2001 • Volume: 28 m³ • Unladen weight: 3,100 kg • Filling weight: 12,000 kg • Dimensions: 7000x2400 mm Location: Bielefeld

Condition: used, Technical data: Pressing force: 178 kN Drive power: 4 kW Work cycle time: 23 s Loading height: 928 mm Loading opening width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg Iedpfxsv Akmzo Abbotf 4-fold with polyester tape Year 2010-2013

Condition: used, Year of construction: 2017, operating hours: 630 h, CAT CS66 compactor, operating hours: only 630h!, air conditioning, weight: 12,362kg, tyres: 90%, previous owner: German Armed Forces, engine: CAT C4.4 [117kW/160hp], smooth drum, very good condition, immediately ready for use! Leasing or financing offers through Mercedes-Benz Bank are available upon request. Mr. Mihm (phone) will be happy to assist you. For further details, please visit our homepage. Subject to errors and prior sale. Rental possible. = More Information = Itedpoyxkpmjfx Abbef Please contact Tobias Ebert for more information.

Condition: excellent (used), functionality: fully functional, mileage: 225,089 km, power: 235 kW (319.51 HP), first registration: 10/2013, fuel type: diesel, empty load weight: 15,800 kg, maximum load weight: 10,200 kg, overall weight: 26,000 kg, axle configuration: 6x2, next inspection (TÜV): 04/2026, fuel: diesel, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: steel-air, Year of construction: 2013, _____ Itjdpfx Aboyxdvaobsf Mercedes Benz Actros 2532/MP3/Faun Powerpress/Schmaedeke Compactor • Manufacturer: Mercedes Benz • Model: Actros 2532 • Mileage: 225,089 km • First registration: 10/2013 • Power: 235 kW / 319 hp • Transmission: Manual gearbox • Suspension: Leaf/Air • Central lubrication system • Body: Faun Powerpress • Compactor: Schmadeke U2500 • Axle configuration: 6x2 • TÜV (MOT): April 2026 • Unladen weight: 15,800 kg • Payload: 10,200 kg • Permitted gross weight: 26,000 kg • Euro 5 Emissions • German vehicle • German documentation / papers • Immediately ready for operation • This offer is non-binding and subject to prior sale. - Intermediate sale reserved, - Errors and/or typographical mistakes excepted. - Sale subject to our terms and conditions.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, pressing force: 48 t, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, year of last overhaul: 2026, Equipment: documentation/manual, HSM VK 4812 P Year of production: 2017 Fully automatic baler. The device has service and maintenance work by an authorized HSM service with a branch in Germany. The baler comes complete with a ramp for ejection of finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage / frequency: 400 V / 50 Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Total length x width x height: 6661 x 3994 x 2583 Machine weight: 10.2 t Compressed material: foil, mixed paper, cardboard, die-cutter waste Bale tying: 4-fold with wire We also have other presses in stock. Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. Itedoyyi Svspfx Abbsf We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: used, Out of insolvency: Rilco shaking bottle Itodorkzt Uepfx Abbof 56mm untested