Used Hydraulic Test Press 102 X 142 Cm - 600 Tons for sale (88,002)

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: Iasdpfx Ahozimcbjzow For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – Fully Functional Description: For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g., in the automotive, mechanical engineering, or research sectors. Technical Highlights: - Max. test force: 100 kN (up to ±150 kN) - Max. torque: ±2000 Nm (up to ±4000 Nm) - Linear stroke: ±50 mm (max. ±75 mm) - Max. rotation angle: ±50° - Servo-hydraulic control - Control via Sincotec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Stand: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Total stand height: approx. 3.30 m Hydraulic Power Unit (separate): - Height: 2085 mm - Length: 2714 mm - Width: 1820 mm Ijdpfxozimb Do Ahzjaw Fully functional before dismantling Power Supply / Electrical (from nameplates): - Single units / Motors - 230 V / 50 Hz - Drain oil pump: 0.18 kW / 1.5 A - 400 V / 50 Hz (three-phase current) - Traverse: 0.25 kW / 0.79 A - Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Delivery includes: (see photos) (Specifications and details subject to change or error!) For further questions, feel free to contact us by phone.

Condition: used, Year of construction: 1994, machine/vehicle number: 6915, functionality: unexamined, operating hours: 27,436 h, pressing force: 80 t, stroke length: 300 mm, table width: 500 mm, table length: 700 mm, ram plate width: 400 mm, ram plate length: 500 mm, distance table to ram: 500 mm, oil tank capacity: 485 l, overall weight: 6,500 kg, Equipment: documentation/manual, safety light barrier, We are offering this used HYDRAP PRESSEN HPSK80 hydraulic press, year of manufacture 1994. Manufacturer: HYDRAP PRESSEN Model: HPSK80 Year of manufacture: 1994 Condition: used Category ID: 1330 Type ID: 1231 Machine type: hydraulic press If you have any questions or require further information, please feel free to contact us by message or phone. Iodpfxsx Ti Auj Ahzeaw

Condition: used, Year of construction: 1980, For sale is a robust mechanical eccentric press / stamping press from the manufacturer MGR. The machine is ideally suited for punching, forming, and pressing operations in the metalworking industry and comes from industrial use. Technical data: Manufacturer: MGR Type: 45R Year of manufacture: 1980 Pressing force: 45,000 kg (45 tons) Stroke: 230 mm Ram stroke: 80 mm Ram adjustable: 55 mm Adjustable stroke: 9 – 120 mm Motor power: 3.5 hp Isdpfxoy Unmbo Ahzoaw Voltage: 380 V Machine no.: 311860

Condition: used, Year of construction: 2019, machine/vehicle number: 6003801003F, functionality: unexamined, Machine Data Model: pegas600 CAMEL Weight: approx. 2580 kg Technical Data Connection: 3 × 400 V, 50 Hz Main motor: 4.0 kW Saw blade Blade dimensions: 6040 × 41 × 1.3 mm Blade speed (frequency converter): 20–100 m/min Cutting Capacity Roll width: 600 mm Max. cutting width: 700 mm Round material Ø 350 mm (at 0°) Ø 600 mm Rectangular material 600 × 480 mm 600 × 415 mm Functions Movement of the saw frame: hydraulic Material feed: manual Material tensioning: hydraulic Blade cleaning: brush Blade tensioning: hydraulic Cooling Flow rate: 40 l/min Iaedpfx Ajzkf Rtjhzjw Tank volume: 40 l Transport Dimensions Length: 1350 mm Width: 2850–4180 mm Height: 2180–2600 mm Table height: 800 mm

Condition: excellent (used), CTS Climate Test Chamber Type: C -40/600, Air-Cooled (converted to R-452a refrigerant) Test chamber volume: 600 liters Temperature tests: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time (at stabilized condition) - Average temperature rate of change (without test load and radiant heat): - Heating: 2.5 K/min - Cooling: 3.0 K/min - Maximum radiant heat input: 2500 W at +20°C Climatic tests: - Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. Iaodpfx Ahjziizgezow - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Chamber internal dimensions (approx.): Height: 850 mm, Width: 850 mm, Depth: 830 mm External dimensions (approx.): Height: 1900 mm, Width: 1115 mm, Depth: 1850 mm Refrigerant: R-452A Power connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your purchase! The following checks and procedures are performed on all our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), functionality: fully functional, conveyor belt length: 2,500 mm, conveyor belt width: 300 mm, Length: 250 cm Width: 30 cm Stud height: 1.5 cm Height adjustable 5 units available Iasdpfoyh Rq Ssx Ahzew Price: 850 EUR per unit

Condition: good (used), For sale is a hydraulic hot plate/molding press manufactured by Italpresse. Technical specifications: Manufacturer: Italpresse Type: GL 14-6/180 Machine designation: PRE46 Press force: 180 t Max. hydraulic pressure: 600 bar Cylinder stroke: 325 mm Opening: 325 mm CE marking present Control system with operating panel/CNC Condition: used, ready for operation Equipment: Enclosed safety cabin Hydraulic press system Hot plate press / molding press Industrial design Electronic control Condition: The machine comes from ongoing production and is in used, functional condition. Inspection possible by arrangement. Iajdpfey Ufqqsx Ahzow

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Iaodpfxjzh Htwe Ahzjw Including metal struts to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), CTS Type: T-70/600/S Water-cooled temperature testing chamber Refrigerant: Converted to R-452A Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions: height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions: height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components Iaodpfx Aezh D E Rehzjw 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: used, Clamping cube for radial drilling machine Clamping plate, clamping cube, clamping block Clamping surface on top: L x W = 600 x 500 mm Clamping surface on the side: L x H = 600 x 460 mm Overall height: 505 mm T-slots: 20 mm T-slot spacing: 150 mm Overall dimensions L x W x H: 680 x 500 x 505 mm Weight: 150 kg Good condition Isdpfx Ahezinz Sezsaw

Condition: good (used), Year of construction: 1991, Electric workshop hydraulic press Iaedpfjzhfzmox Ahzew Capacity: 50 tons. Table width: 800 mm, cylinder stroke: 200 mm.

Condition: used, Year of construction: 1996, functionality: fully functional, We are selling our used Dunkes HDS 100: Pressing force 1000 kN Iedpfezi D R Asx Ahzsaw Ram stroke 300 mm Installation height 400 mm Table height above floor 950 mm Table surface W x D 830 x 630 mm Ram surface W x D 830 x 630 mm Ram bore / tool clamping diameter Ø 50 mm Machine dimensions W x D x H 2120 x 1565 x 4000 mm Oil volume 650 liters Rapid traverse or approach speed 400 mm/s Screen control, type CNC50 PLC control S5-95U Available upon agreement. Sold without warranty or right of return.

Condition: excellent (used), Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 600 mm Ijdpewv Nl Ijfx Ahzjaw -Length: 3.0 m -Transport dimensions: Ø 110 x 600 mm -Weight: 4.2 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 400 x 600 mm -T slots: Slot width 12 mm -rotatable -tiltable and swivelling via cranks -Fits Deckel Mikron WMW and other milling machines Iodpfxsb A Iyuo Ahzsaw -Weight: 200 kg -Quantity: 1 available Price: per piece

Condition: good (used), Year of construction: 1952, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Safety cage fully enclosed -pneumatic viewing window with finger protection -Pressure force: 35 tons -Protrusion: 190 mm -Stroke rate: 105 strokes/min -Adjustable plunger: 50 mm -Pulley surface 250 x 200 mm -Adjustable stroke: 15-70 mm Iajdob A Hwhepfx Ahzsw -Table size: 540 x 310 mm -Protrusion: 180 mm

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table -Table surface: 600 x 220 mm -Y-axis: 130 mm movable, hand crank with fine adjustment, see photos -T grooves: groove width 12 mm, groove spacing 45 mm Iedpjqddi Uefx Ahzeaw -Total dimensions: 690/490/H300 mm -Weight: 72 kg

Condition: good (used), Year of construction: 1986, Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Heilbronn, single column eccentric press type NEPD 50 -Pressure capacity: 50 tons -Clutch: pneumatic -Stroke: adjustable 8 - 100 mm -Table size: 500 x 650 mm Iasdpfx Asi Agynshzjw -Table recess: Ø 240/100 mm -Projection: 255 mm -Punching fixture: Ø 40 mm -Insertion height 355 mm -Dimensions: 1800/1080/H2260 mm -Weight: 3050 kg

Condition: good (used), Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door Ijdod Sm U Djpfx Ahzeaw -Profile door KTS for: refrigerator -TS single door: 600 x 2000 RAL 7035 -Article No.: 5050154 -Dimensions: 2040/645/H90 mm -Weight: 33 kg

Condition: good (used), Computer cabinet, server cabinet, control cabinet, network server cabinet, computer enclosure -Manufacturer: apra net Ijdpfx Aheb Riacozjaw -double opening -Dimensions: 600/600/H600 mm -Weight: 54 kg

Condition: good (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Transport roller: Diameter 320 mm -Transport width: 600 mm -Shaft: Mounts Ø50 x 95 mm -Quantity: 1x transport roller available Iaodopul T Tspfx Ahzew -Dimensions: Ø 320 x 790 mm -Weight: 70 kg

Condition: good (used), Year of construction: 1974, Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press Iasdpfx Asigwdwjhzew -Manufacturer: Kalisz, manual screw press type YB-1 with solid base -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg

Condition: good (used), Year of construction: 2010, Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor -Manufacturer: Transnorm, belt conveyor type 1100 Iodpfx Aheihc U Njzsaw -Speed: frequency controlled, up to 83.5 m/min -Drive: SEW-Eurodrive 1.1/0.11 kW, see photo nameplate -Belt width: 600 mm, up to 800 mm possible -Conveyor length: approx. 13400 mm -Set-up dimension: 13495/940//H340 mm -Transport dimension: 4150/940/H670 mm -Total weight: 422 kg

Condition: good (used), Year of construction: 2010, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor Isdpfx Aoihi T Tjhzjaw -Manufacturer: Transnorm, belt conveyor type 1100 -Speed: frequency-controlled, up to 83.5 m/min -Drive: SEW-Eurodrive 1.1/0.11 kW, see photo of nameplate -Belt width: 600 mm -Conveyor length: approx. 6000 mm -Installation dimensions: 6000/940/H340 mm -Transport dimensions: 4200/940/H490 mm -Total weight: 269 kg

Condition: good (used), Year of construction: 2010, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor -Manufacturer: Transnorm, belt conveyor type 1100 -Speed: frequency-controlled, up to 83.5 m/min Iaedjihi Ubspfx Ahzow -Drive: SEW-Eurodrive 1.1/0.11 kW, see photo of nameplate -Belt width: 600 mm -Conveyor length: approx. 6000 mm -Installation dimensions: 6010/950/H340 mm -Transport dimensions: 4140/950/H430 mm Total weight: 300 kg