Used Iemca Pra40/12/R for sale (78,349)

Condition: used, mileage: 24,691 km, power: 177 kW (240.65 HP), first registration: 04/1994, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 1994, Equipment: ABS, all wheel drive, compressor, parking heater, Mercedes-Benz 1124AF 4x4 all-wheel drive fire engine LF16/12 according to DIN 14530, 177 kW/240 hp with 9 seats and auxiliary heating First registered: 04/1994 Mileage: 24,691 km ----* 6-cylinder OM 366 LA engine with 240 hp. * 6-speed manual transmission with low gear ratio * 2x differential locks (longitudinal and transverse) * ABS (deactivated via push button) * Warm air auxiliary heating * 90 km/h according to the documents * Compressed air connection for external filling of the brake system * Crew cabin with 9 seats, all with seat belts, including 2 emergency seats * Unladen weight: 7,610 kg. * Gross vehicle weight: 12,000 kg. * Small tow bar with 2000 kg towing capacity * Rotating beacons * Searchlights * 9R22.5 tires in good condition * Wheelbase: 3640 mm * Overall vehicle length: 7300 mm * LF 16/12 fire engine with mast body * 1270-liter fire water tank * Rosenbauer FP 16/8 centrifugal fire pump * Storage for generator in body * 1 spare wheel * Roof storage compartments for ladders and hoses Ncodpfx Aowawdgokyjr ----TÜV valid until 11/2025 Good technical and visual condition, ready to drive and use immediately! Full service history! Perfect off-road base vehicle for a robust camper/expedition vehicle or other all-wheel drive vehicle applications. Subject to errors and changes!

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: R-2000iB/125L R-30iB, load capacity: 125 kg, arm reach: 3,010 mm, controller manufacturer: Fanuc, controller model: R-30iB, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. 100% complete and fully functional: robot arm, controller, all cabling and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: FANUC Type: R-2000iB/125L Controller: R-30iB General purpose: Heavier payload floor mount with long reach. Payload: 125 kg Reach: 3.01 m Robot mass: 1190 kg Ncsdpfx Ajyb Swpokyer Delivery time: By mutual agreement IRS Robotics® Refurbished: 77-Point Protocol – thoroughly tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily business is the supply of refurbished A-Brand robots: ABB – KUKA – ABB – YASKAWA. Est. 2002. We ship worldwide!

Condition: used, mileage: 56,386 km, power: 235 kW (319.51 HP), first registration: 06/2020, fuel type: diesel, number of seats: 60, gearing type: mechanical, emission class: euro6, color: other, brakes: retarder, total length: 12,400 mm, total height: 3,350 mm, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, = Other Options and Accessories = - Retarder - Webasto Ncedpfsyyldnex Akyjr = Further Information = Damages: none = Company Information = We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, featuring a large parking area that serves as a showroom. We always have a wide selection of buses of all makes, capacities, models, and price ranges in stock. We can find the right coach, school, or city bus tailored to your needs and budget. All details are provided without guarantee. Subject to error, prior sale, and typographical mistakes. Opening hours for viewing used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 9,150 kg, load capacity per storage section: 3,050 kg, total length: 22,800 mm, total height: 3,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 3,500 mm, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 22,800 mm, 4 double-bay pallet racks (M35112711-3) Each 5.7 m long, 3.5 m high, 1.1 m deep, Each with 2 bays, 2.7 m wide, Each with 3 beam levels, shelf load capacity 3000 kg. - 12 frames (RM3511 - RAL5019) - 24 base plates, shim material, fastening material - 48 floor anchors (ZZBA1210) Ncodjyz Iccspfx Akysr - 48 single beams (T2711 - RAL2008) - 4 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Max. 20 working days after receipt of payment - Delivered free to site/installation location - Unloading from the truck to be carried out by the buyer using their own lifting equipment - Deliveries available throughout the Federal Republic of Germany (except islands); deliveries to EU countries upon individual agreement.

Condition: used, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 16803, fuel type: electric, empty load weight: 750 kg, total length: 1,810 mm, construction height: 1,500 mm, drive type: Elektro, construction width: 1,225 mm, sweeping width: 1,000 mm, Sweeper-scrubber machine Chassis number: 16803 Condition: As new Technical condition: Very good Battery voltage: 24V Battery capacity: 240Ah Battery manufacturer: Hoppecke Aquamatic Ncjdpeyytixjfx Akyer Battery type: PzS Battery year: 2024 Battery condition: 80 - 100% Description: 1,000 mm working width, 6,000 m²/h surface performance, 120 l container capacity, hydraulic high dump, round filter, automatic filter cleaning, 3.5 h battery runtime, right-hand side brush, gradeability 12%, working speed 6 km/h, suitable for indoor and outdoor use.

Condition: used, mileage: 650,000 km, fuel type: diesel, Year of construction: 2021, IVECO S-WAY 480, year 12/2021, automatic transmission, retarder, intelligent third axle, curtain-sided body measuring 7.40 x 2.55 x H 2.60 m with lift/lower and sliding roof, retractable Anteo tail lift with 2,000 kg capacity, /70 tires, full air suspension, 650,000 km. Financing or leasing available on site. Nsdpoy Dglhsfx Akyocr

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 130 h, load capacity: 200 kg, mast type: telescopic, lifting height: 12,100 mm, platform length: 850 mm, platform width: 1,100 mm, overall weight: 2,550 kg, empty load weight: 2,550 kg, next inspection (TÜV): 08/2026, fuel type: electric, tire condition: 100 %, drive condition: 100 %, wheelbase: 1,900 mm, color: green, Equipment: UVV, differential lock, The aerial work platform was acquired in 08/2024. Self-propelled and fully electric. 12.1 m working height. 6 m telescopic outreach to the side. Due to its low tare weight, it can be transported on a 3.0 t trailer by car. Travel speed 6 km/h. The batteries last for several days under normal operating conditions. Non-marking, solid rubber tires. Controls are the same as all Nifty systems. UVV inspection is new. If required, the transport trailer can also be purchased, but it is not included in the price of the articulated boom lift. We would be pleased to provide you with an offer if interested. Ncsdpfxjw Sgu De Akyer

Condition: used, mileage: 420,232 km, power: 157 kW (213.46 HP), first registration: 05/2017, fuel type: diesel, tire size: 265 / 70 / R19.5, axle configuration: 4x2, wheelbase: 4,800 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 6, suspension: steel-air, number of seats: 2, total length: 9,090 mm, total width: 2,550 mm, total height: 3,850 mm, permissible axle load (axle 1): 5,000 kg, permissible axle load (axle 2): 9,440 kg, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 2,560 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, soot filter, spoiler, tail-lift, Technical information Number of cylinders: 4 Engine capacity: 4.500 cc Transmission Transmission: ZF, 6 gears, Automatic Axle configuration Tyre size: 265 / 70 / R19.5 Make axles: DAF Brakes: disc brakes Front axle: Max. axle load: 5000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 9440 kg; Tyre profile left inner: 20%; Tyre profile left outer: 20%; Tyre profile right outer: 20%; Tyre profile right outer: 20%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 6.390 kg Carrying capacity: 5.600 kg GVW: 11.990 kg Functional Tail lift: Dhollandia DHSM.20, slider lift, 1500 kg Make of bodywork: van Bekkum Carrosserie Curtainside / Schuifzeil / Pritsch - Plane Sliding roof: Yes Interior Interior: grey Environment Emission class: Euro 6c Condition General condition: average Technical condition: average Visual appearance: average Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Armrest - Car kit - Low-noise - Particulate filter - Radio, MP3 enabled - Radio/CD player - Remote central locking - Speed limiter - Spoilers Ncsdpsyx Swrjfx Akysr - Stability control - Toolbox - Visor

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 177 kg, fuel type: gasoline, color: yellow, power: 13.5 kW (18.35 HP), output current: 16 A, Wacker Neuson GS 12 AI Generator NEW Wacker Neuson GS 12 AI Generator – NEW | Continuous output: 5.0 to 9.4 kVA | 12 kW Honda petrol engine | Electric start | 230 / 400 V voltage | incl. trolley frame | Operating weight: 177 kg Item number: 5000620317 Technical Specifications: Manufacturer: Wacker Neuson Model: GS 12 AI Condition: NEW Operating Weight: 177 kg Continuous Output: 5.0 to 9.4 kVA Engine: Honda GX 630 petrol engine Engine Power: 12 kW Starting System: Electric Voltage: 230 V / 400 V Connections: 2 x Schuko 230 V / 16 A, 1 x CEE 230 V / 16 A, 1 x CEE 400 V / 16 A, 1~ CEE 7/3 Special feature: Incl. trolley frame Highlights & Features: - Powerful generator – ideal for construction sites & industry - Robust Honda engine – reliable & easy to maintain - Electric start – convenient & fast - Integrated chassis – mobile & versatile - Made by Wacker Neuson – proven quality & immediately available Applications: ✓ Construction site supply & trades ✓ Events & temporary power supply ✓ Agriculture & municipal operations Nsdpfoyyprcox Akyjcr ✓ Workshop & emergency power supply ✓ Commercial use Location: Warehouse D-46514 Schermbeck (NRW) – Inspection and collection possible Delivery: Germany-wide & international upon request Pricing: ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to prior sale and errors. Prices plus VAT / VAT excluded Other models and sizes available! Also in stock: GV 7003 A etc. ➡️ New & used machines, accessories & spare parts Buy a Wacker Neuson Generator | GS 12 AI NEW | 12 kW petrol generator | Construction site generator with 400/230 V | Honda GX 630 engine | Wacker Neuson quality Your reliable partner for generators & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Contact us now & secure immediately available new equipment! A virtual inspection of the machine via video call is available on request.

Condition: used, mileage: 251,000 km, power: 162 kW (220.26 HP), first registration: 11/2002, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, brakes: retarder, color: silver, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, compressor, navigation system, parking heater, MAN 12 220 Horse Truck for 5 Horses, Living Quarters Excellent Condition. Accommodates 5 horses, with side and rear ramps, storage cellar under the living area, storage compartments around the truck, fresh water tank, 3–4 sleeping spaces, living room, large bed above bathroom, groom’s bed, video surveillance and temperature monitoring for the horse compartment. LG stationary air conditioning, auxiliary heating, TV/Satellite, fine wood interior, bathroom with shower and toilet, air conditioning, kitchen, leather seating group, microwave, refrigerator, external tack compartment, winch, cruise control, alloy wheels, air suspension, trailer hitch, and much more. Errors/input mistakes & interim sale reserved. * NET PRICE SALE POSSIBLE. Nedpfxjyygixo Akyjcr * Top leasing offers Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all brands of horse transporters and trailers. Please schedule an appointment in advance with Richard Theurer or Andreas Theurer.

Condition: new, Year of construction: 2018, Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Nodpfx Asd Ambtekyscr Passive vibration isolation pads Software: metrolog AN Scan Standard Geosurf Advanced SP Step converter I ++ interface Technical specifications Measurement paths: X: 1200mm Y: 2000mm Z: 1000mm Max workpiece weight: 1200kg Weight of the measuring system: 5700kg Overall dimensions: 3020x2190x3750mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.9μm Volumetric length measurement deviation: MPEE = 2.9+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 120NI / min

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, color: black, number of seats: 13, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Sprinter 315 Lord Comfort H2 L2 Length 5993 mm, Height 2780 mm incl. air conditioning Nodpsx Rrmqjfx Akyecr - 11+1+1 seats + 1 Dos a Dos table - Reclining sleeper seats with magazine nets (rearward adjustable) - Acoustic and thermal insulation in passenger compartment - Multi-level night lighting in white/blue - USB sockets at every seat row - Original electric sliding door and entry step (Mercedes-Benz) - VIP Black double glazing with curtains - Gerflor Yellowstone flooring - Convector heating - Webasto/Riga air conditioning in passenger compartment with dual compressor - Passenger compartment clock Optional equipment: 3-button remote for central locking system, passenger airbag, acoustic package, trailer hitch: electrics for trailer socket, straight rear-exit exhaust, electrically folding external mirrors, mirrors with blind spot assist, DAB tuner (digital radio), grab handle on rear right D-pillar, driver assistance systems: active brake assist, lane keeping assist, Attention Assist (drowsiness detection sensor), tachograph control in front under headliner, suspension: stabilization level I, vehicle without lowering function, no cargo area partition, 250A alternator, B-pillar grab handle, A-pillar grab handles, interior: air vents in dashboard, folding lid for glovebox, color display instrument cluster, dashboard charging package (additional USB sockets and 12V outlet), cable ducts at rear portal, cable ducts at side wall, multifunction steering wheel, alloy wheels 6.5x16 (6-spoke), side marker lights, fog lamps with cornering light function, programmable special module, park package with rear view camera, tire pressure monitoring system, interior rearview mirror, rain sensor windshield wipers, right-hand electric sliding door, front and rear mud flaps, comfort driver seat, driver seat with lumbar support, electric entry step under right sliding door, center dashboard USB port (charging only), reinforced front axle, tachograph pre-installation, heat-insulating glazing (front windscreen with top band filter), additional electric air heater, supplementary hot water heating Further equipment: 3rd brake light, overhead storage above windscreen, under-dashboard glovebox on passenger side, rear towing eye, adaptive brake light, driver airbag, Hill Start Assist, traction control (ASR), washer fluid level indicator, heated and electrically adjustable exterior mirrors (both sides), outside temperature display, automatic driving light activation, entry grab for sliding door at bulkhead, electronic brake force distribution (EBV), breakdown management assist, crosswind assist, external noise reduction measures, 9-speed GTronic automatic transmission, rear doors (180-degree opening), body/build: standard van, Keyless-Start, child safety lock, communications module (LTE) for digital services, main fuel tank: 71 liters, mechanically adjustable steering column, headlamp leveling system, commercial vehicle registration, Mercedes-Benz emergency call system, engine 2.0L – 110 kW CDI CAT, radio pre-wiring, wheelbase 3665 mm, Euro 6d emission standard, right sliding door (cargo/passenger compartment), seat belt warning for driver and passenger, fabric seats/upholstery, adjustable passenger seat, start/stop function engine, fleece battery

Condition: used, Year of construction: 2014, operating hours: 3,085 h, load capacity: 800 kg, lifting height: 1,580 mm, fuel type: electric, construction height: 1,860 mm, gearing type: automatic, overall weight: 679 kg, empty load weight: 495 kg, total length: 1,777 mm, color: red, mileage: 3,085 km, first registration: 11/2014, suspension: other, number of seats: 1, driver cabin: other, emission class: none, fuel: electricity, The BT SWE 080L stands for a proven combination of efficiency, stability, and precise control in daily warehouse operations. This model is aimed at companies seeking to optimize their internal processes reliably and economically, without sacrificing performance. The electric drive enables quiet and emission-free operation, which is a key advantage, especially in enclosed halls and sensitive working environments. The automatic transmission ensures a particularly smooth driving experience and intuitive handling, allowing workflows to be carried out seamlessly without unnecessary interruptions. With a lift height of 1,580 mm, this stacker provides optimal conditions for efficiently moving goods on different levels and making the best use of warehouse space. This not only increases productivity but also leads to sustainable improvements in warehouse organization. Its compact design, with a width of only 726 mm, makes it a dependable partner even in narrow aisles and confined spaces. At the same time, the robust construction ensures stability and safety during every operation, even under heavy use. The 3,085 operating hours reflect solid, continuous use and show that this unit is built for everyday practical applications. With first registration in November 2014, this is a mature and field-tested model that has proven itself over many years. This stacker represents a well-considered investment for companies seeking durable technology, low operating costs, and reliable performance. With the BT SWE 080L, you are securing an industrial truck that will optimize your workflows and deliver tangible benefits in daily operations. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Subject to prior sale and errors. Ncedpeymgvdofx Akyjr

Condition: used, GS international Capacity 12 tons Year of construction 2010 Immediately available Loading bridge needed on site? We can transport the loading bridge for you Njdpsyxv E Hjfx Akyocr

Condition: used, Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm # 6726 Weinig Unicontrol 12 CNC ----- Sale on behalf of a customer. Machine connected and ready for demonstration. Including used window tools for Unicontrol 12, OERTLI for various wood thicknesses ----- Brief Summary: ----- - 2 x tenoning spindles each 640 mm length, CNC controlled - "Vario-Table" - 3 x profile spindles each 400 mm length, CNC controlled - FItting spindle + grooving units (top and bottom) - Includes used window tools for Unicontrol 12, OERTLI programmed and set up for various wood thicknesses and systems (see pdf attached). Detailed Description: ----- crosscut saw ----- Crosscut saw electronically, horizontally infinitely adjustable Number of tools: 1 pc. Spindle speed: 3000-6000 rpm Spindle diameter: 40mm Tool diameter max.: 400 mm Motor power: 3 kW Laser guide light to identify the saw section rounding aggregate ----- Position: horizontally below Motor power: 1 kW Spindle diameter: 20mm Spindle speed: 9000 rpm Tool flight circle max.: 130 mm electronic length stop, length: 3500 mm ----- Nedeyyqm Iopfx Akyecr 1. tenoning Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 2. Tap and Slot Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 1. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 2. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 3. Profiling spindle ----- Position: horizontally above Tool clamping length: 40 mm Spindle speed: 9000 rpm Spindle diameter: 40mm Tool flight circle max.: 130 mm Motor power: 3.7 kW 4. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Hori...

Condition: used, Manufacturer: DMG Gildemaster Country of Origin: Italy CNC Control: FANUC 16i-TB with 7 axes CE Declaration of Conformity Technical Data - Number of axes: 7 - Number of spindles: 2 Travel distances: X1 axis: ±30 mm Z1 axis: 120 mm Y1 axis: 195 mm X2 axis: 30 mm Ncodpfeygl N Nsx Akyjr Z2 axis: 180 mm MAIN SPINDLE - Max. bar diameter: 12 (13) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (13) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: Tool drive power: 1.1 kW Max. speed: 6,000 rpm IEMCA SMART 316 bar feeder Chip conveyor Machine dimensions: approx. 2043 x 1200 x 1750 mm Machine weight: approx. 2,200 kg Main spindle and counter spindle with new bearings!

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Nodekvnumjpfx Akyscr Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 634,895 km, power: 243 kW (330.39 HP), first registration: 12/2011, fuel type: diesel, number of seats: 38, gearing type: automatic, emission class: euro5, color: other, brakes: retarder, total length: 1,000 mm, total height: 3,250 mm, Year of construction: 2011, Equipment: ABS, air conditioning, cruise control, = Additional Options and Accessories = - Air conditioning = Further Information = Damage: minor damage Ncjdpfx Aewxxczekyjr = Company Information = We are an international company based in Belgium, located near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, offering an extensive parking area that serves as a display space. We constantly have a wide range of buses of all brands, capacities, models, and in every price range in stock. We can find the right coach, school, or city bus for you, tailored to your requirements and budget. All information provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Opening hours for viewing used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: used, functionality: fully functional, machine/vehicle number: 2496288, Year of construction: 2020, load capacity: 227 kg, lifting height: 3,650 mm, fuel type: electric, overall weight: 864 kg, color: red, tire size: 12x4x8, platform length: 850 mm, platform width: 690 mm, transport length: 1,370 mm, transport width: 770 mm, transport height: 1,790 mm, Equipment: UVV, Technical data Year of manufacture: 2020 Working height: 5.65 m Platform height: 3.65 m Platform dimensions (L x W): 0.85 m x 0.69 m Overall dimensions (L x W x H): 1.37 m x 0.77 m x 1.79 m Load capacity: 227 kg Total weight: 864 kg Drive: DC power supply 24V Gradeability: 30% Turning radius (outside): 1.40 m Travel speed: 0.80 - 4.0 km/h Tyres: Solid rubber Ncjdoyx S Ecjpfx Akyjr UVV, fully functional, normal signs of use

Condition: used, functionality: fully functional, machine/vehicle number: 2496058, Year of construction: 2019, load capacity: 227 kg, lifting height: 3,650 mm, fuel type: electric, overall weight: 864 kg, color: red, tire size: 12x4x8, platform length: 850 mm, platform width: 690 mm, transport length: 1,370 mm, transport width: 770 mm, transport height: 1,790 mm, Equipment: UVV, Technical Data Year of manufacture: 2019 Nsdpfsyx S D Sox Akyjcr Working height: 5.65 m Platform height: 3.65 m Platform dimensions (L x W): 0.85 m x 0.69 m Overall dimensions (L x W x H): 1.37 m x 0.77 m x 1.79 m Payload capacity: 227 kg Total weight: 864 kg Drive: 24V DC power supply Gradeability: 30% Turning radius (outside): 1.40 m Travel speed: 0.80 - 4.0 km/h Tyres: solid rubber UVV safety inspection, fully functional, general signs of use

Condition: used, functionality: fully functional, machine/vehicle number: 2495848, Year of construction: 2018, load capacity: 227 kg, lifting height: 3,650 mm, fuel type: electric, turning radius (outer): 1,400 mm, overall weight: 864 kg, color: red, tire size: 12x4x8, platform length: 850 mm, platform width: 690 mm, transport length: 1,370 mm, transport width: 770 mm, transport height: 1,790 mm, Equipment: UVV, Technical data Year of manufacture: 2018 Working height: 5.65 m Platform height: 3.65 m Platform dimensions (L x W): 0.85 m x 0.69 m Overall dimensions (L x W x H): 1.37 m x 0.77 m x 1.79 m Load capacity: 227 kg Total weight: 864 kg Drive: 24V DC power supply Climbing ability: 30% Turning radius (outside): 1.40 m Travel speed: 0.80 - 4.0 km/h Tyres: solid rubber UVV, fully functional, typical signs of use Nedpfx Aoyx S D Eokyecr

Condition: used, functionality: fully functional, machine/vehicle number: 2495668, Year of construction: 2017, load capacity: 227 kg, lifting height: 3,650 mm, fuel type: electric, overall weight: 864 kg, color: red, tire size: 12x4x8, platform length: 850 mm, platform width: 690 mm, transport length: 1,370 mm, transport width: 770 mm, transport height: 1,790 mm, Equipment: UVV, Technical Specifications Year of manufacture: 2017 Working height: 5.65 m Platform height: 3.65 m Platform dimensions (L x W): 0.85 m x 0.69 m Overall dimensions (L x W x H): 1.37 m x 0.77 m x 1.79 m Load capacity: 227 kg Total weight: 864 kg Drive: DC power supply 24V Nodpfx Aoyx Snqjkyjcr Gradeability: 30% Turning radius (outer): 1.40 m Travel speed: 0.80 - 4.0 km/h Tyres: Solid rubber UVV, fully operational, general signs of use

Condition: used, functionality: fully functional, machine/vehicle number: 2495368, Year of construction: 2016, load capacity: 227 kg, lifting height: 3,650 mm, fuel type: electric, front tire size: 12 x 4 x 8, rear tire size: 12 x 4 x 8, overall weight: 864 kg, total height: 1,790 mm, total length: 1,370 mm, total width: 770 mm, color: red, tire size: 12x4x8, transport length: 1,370 mm, transport width: 770 mm, transport height: 1,790 mm, Equipment: UVV, Technical specifications Year of manufacture: 2016 Working height: 5.65 m Platform height: 3.65 m Platform dimensions (LxW): 0.85 x 0.69 m Load capacity: 227 kg Total weight: 864 kg Drive: DC power supply 24V Climbing ability: 30% Ncjdpfx Aoyx Snkskyer Turning radius (outer): 1.40 m Tyres: solid rubber UVV, fully functional, typical signs of use

Condition: used, Part suitable for: trucks Ncodpfeywr Rpex Akyjr Price: On request VAT/margin scheme: VAT deductible Type number: 2189380

Condition: used, mileage: 611,100 km, power: 188 kW (255.61 HP), first registration: 05/2011, fuel type: diesel, number of seats: 35, gearing type: automatic, emission class: euro5, color: green, Equipment: ABS, * 36 seats * 61 standing places * Driver's seat air conditioning * Door I double width * Door II double width * Accident data recorder * Radio clock * 34 seats, 2 folding seats * Matrix display front, side, rear (Lawo) * Good tires * Split front windshield Ncedpfx Aksyyfkzsysr * Voith transmission * Stroller space * Wheelchair space with partition wall * STOP button Errors and prior sale excepted.