Used Ifm Interface Ac1375 for sale (4,259)

Condition: used, mileage: 119,200 km, power: 316 kW (429.64 HP), first registration: 03/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Trailing axle, steerable and liftable. * Full service history ----Meiller hooklift system Type RS21.70, radio remote control, hydraulic internal locking, hydraulic underrun protection. ----* Connectivity board module (RIO Box) * 12-speed automatic transmission * MAN EasyStart (hill-hold assist) Hnedpfxjyl Dwvo Akrju * MAN EVBec (electronically controlled exhaust valve brake) * MAN Media System Advanced Navigation 7-inch * Front axle air suspension * Rear axle differential lock * Traction control system (ASR) * Rear axle air suspension * Digital axle load display (ALM) in the cab, air-suspended axles * Liftable trailing axle * Duomatic brake coupling * Anti-lock braking system (ABS) * Emergency brake assist (EBA) * Electronic Stability Program (ESP) * Disc brakes * Full brake assist * Attention warning system MAN AttentionGuard * Wheelbase 4,800 mm * Electrically operated sliding/lifting roof, glass version * Battery master switch * Interface, Fleet Management System (FMS) * Lane departure warning (LDW) * Exterior sun visor, transparent * Electrically adjustable and heated exterior mirrors * GM cab – the spacious option (wide, long, medium height) * Central locking with radio remote control * Immobilizer (transponder) * MAN TipMatic 12 28 OD gearbox * Automatic climate control * Additional hot water heating * Reversing warning system * 390-liter fuel tank * Fog lights * Euro 6E engine configuration * Cruise control * Engine with AdBlue technology * Tow hitch (jaw-type) * Cornering light * Lower bunk * Driver’s seat: air-suspended, heated, and ventilated * Steerable trailing axle * Refrigerator drawer under bed * EBS (Electronic Braking System) * Without spare wheel ----Sale exclusively to business customers! No guarantee for the information provided! Subject to prior sale! Only our general terms and conditions apply! We are happy to offer you a leasing or financing proposal.

Condition: new, mileage: 350 km, power: 129 kW (175.39 HP), color: white, gearing type: automatic, loading space length: 35,000 mm, loading space width: 18,000 mm, loading space height: 19,000 mm, Equipment: ABS, air conditioning, central locking, power assisted steering, To ensure you receive the best possible advice, please schedule an appointment. Mr. J. Ebert will be happy to assist you. ! Available in 12 units ! Sliding door on the passenger side, seat belts with warning signal for driver and passenger, standard seat belt color, bench seat for passenger with 3-point belt on the middle seat, standard headrests, seat belt pretensioner on the passenger side, seat covers in fabric, halogen headlights, light and rain sensor, manual high beam control, pre-wiring for trailer socket 12V 13-pin, body manufacturer interface, tinted windows, rear parking sensors, fuel filler neck in the B-pillar, standard vehicle badge, tire pressure monitoring system (TPMS), side vehicle designation, proactive lane keeping assist with lane departure warning (ELK), standard paint, autonomous emergency braking system (AEBS) with city brake, MY 2024, electrically adjustable and heated exterior mirrors, cab width 2000 mm, storage compartment above the cab, driver drowsiness attention warning, central locking with remote control, speed limiter 160 km/h, rear wall insulation, traffic sign recognition with intelligent speed assistant (ISA), electric windows for front doors, front airbags for driver and passenger with seat belt pretensioners, first aid kit, preparation for alcohol interlock system, AdBlue tank 20 liters under the cab, towing capacity 3.5 t, standard according to ZGM, weight variant 1900/2240 kg, ESP system, steel wheels, reinforced parabolic spring rear axle, single-leaf, fuel tank 63 l between frame rails, manually operated parking brake in the center, standard transverse leaf spring suspension front, standard suspension, front axle, rear axle ratio i 3.12, settings for special fuels (HVO/GTL), heated fuel filter, automatic torque converter transmission HI-MATIC 8HP, comfort noise insulation, cargo area lights 3 LED, rear door opening angle 260°, exterior cargo lights above rear doors, seat heating, luxury seat for driver with armrest and lumbar support, adjustable in height, inclination and length, hydraulically sprung, heated, preparation for digital tachograph according to EC regulations 4.1, additional speed limiter, VDI interface (Vehicle-Data-Interface) for telematics services (FMS), version 4.0, mirror for body width 2200 mm, reversing camera with dynamic lines, radiator grille with chrome inserts, My Iveco infotainment 10 inch, leather steering wheel, USB socket on driver and passenger side, air conditioning with automatic climate control, adaptive cruise control (ACC), White IC 194, tires 225/65R16 We would be happy to provide you with a quote for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will gladly provide you with an individual offer. Errors and prior sale excepted! Mr. J. Ebert will be happy to assist you by phone at: For more information, please visit our website: ... ESP, particulate filter, partition Hsdpfszwlrdex Akronu = Further information = Engine displacement: 2,998 cc GVWR: 3,500 kg Please contact Tobias Ebert for further information.

Condition: used, mileage: 164,000 km, power: 310 kW (421.48 HP), first registration: 11/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, total length: 11,600 mm, total width: 2,550 mm, total height: 3,720 mm, loading space length: 9,428 mm, loading space width: 2,470 mm, loading space height: 2,200 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, tail-lift, We are very pleased that our offer has aroused your interest and would like to assure you that you can purchase a good and affordable vehicle with a traceable service history at our company! Special equipment: Storage compartment in the engine tunnel, high, front axle load 8.0 t, equipment package: Driving, sun visor for side windows, driver and passenger door, sun visor for side window, driver's door, exterior mirror camera MirrorCam, battery 220 Ah (AGM), CB radio, cockpit multimedia interactive, navigation system, remote online function, air horn, driving assistance system: turning assistant, cab: steel sprung, comfort, vehicle without underrun protection at the rear, transmission 12-speed - type: G 211-12, mudguards 3-piece, mudguards 3-piece with splash guard, fuel tank: 390 L aluminum, left, air intake from the front, air deflector on the roof (lockable), trailing axle 7.5 t steered, relieved, liftable, wheelbase variant 5800 mm, frame overhang 2850 mm, reversing warning acoustic and warning flashing light (warning signal outside), switch for tailgate lift, interface for fleet management system, seat cover / upholstery: passenger seat velour, seat cover / upholstery: driver seat velour, seats in the cab: driver's seat comfort sprung seat, sun visor outside, socket 12V / 15 A in the passenger footwell additionally, socket 24V in the passenger footwell additionally, preparation for 4 surround cameras (display on the on-board monitor) Hedpfx Aoy Ng N Dskrjnu Further equipment: Emission standard EURO 6, axle configuration: 6x2, Actros 5, Actros cab S / M, approach / front mirrors heated, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pole, exhaust to the right outside, exhaust system two-part, batteries arranged side by side, differential lock rear axle, torque increase 12th gear, compressed air connection in the cab, compressed air container steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic switch-on for driving lights (light sensor), cab: cab entrance fixed, cab: tilting device hydraulic, cab: M ClassicSpace, 2.30 m, tunnel 170 mm, cab floor with engine tunnel 170 mm, cab: width 2.30 m, cab: height 600 mm, cab variant: M, stowage flap outside left, storage compartments with lid behind driver and passenger seat, air intake behind the cab, vehicle outline lights LED, suspension: air / air (full air), power windows, windshield tinted, vehicle without rear window, generator 100 A, speed limiter, urea tank (AdBlue): 60 L, rear axle bevel gear 440, body / structure: chassis, comfort central locking system, steering pump unregulated, steering oil cooler, air compressor 2-stage, air dryer heated, engine 12.8 L - 310 kW R6 diesel (OM 471), engine brake, engine variant OM 471, type of use: local transport, wheelbase not defined, ramp mirrors, waste heat recovery, disc brakes front and rear axle, key with remote control (2), side marker lights LED flashing, seats in the cab: passenger comfort seat, splash guard front, stabilizer front axle, stabilizer additional, rear axle / trailing axle, socket 12V in the passenger footwell, tachograph / EC control unit, Truck Data Center 7 (fleet management system), underrun protection front, preparation for toll collection, preparation Truck Data Center (fleet management system), front axle angled, water pump regulated, permissible total weight 26.00 t GERMAN VEHICLE REGISTRATION /

Condition: as good as new (ex-display), Year of construction: 2026, Striebig CONTROL Type 6224 Cutting Area: L: 5300 x Hvertical: 2240 / Hhorizontal: 2100 x D: 80 mm Technical Data: Saw weight: approx. 1,200 kg Cutting depth: 80 mm Saw motor power: 5.5 kW (7.5 HP) Saw blade diameter: 300 mm Saw blade bore: 30 mm Emission sound pressure level at workstation LpA: 89.5 dB Saw blade speed: 4,800 rpm 2 extraction ports Ø 140 mm Compressed air connection: 6-10 bar Connected load: 7.3 kW (max 10.7 kW) Power supply: 3 x 400 V / 50 Hz Continuously adjustable scoring saw unit (VSA) Small parts made of aluminium Free-standing support complete, type: 6 ExpertCut Machine data provision (Industry 4.0 ready) Striebig Service Data Import / Label Layout Hnjdpfx Asy Ehnyskrsu Customized configuration of data import interface and label layout. The customer’s .csv file is checked and tested with the import drivers for cutting optimization. The label layout is adapted and prepared to customer requirements. Location: ex-stock 54634 Bitburg - Immediately available -

Condition: used, This listing is for a Watson Marlow 530S Peristaltic Pumps The units are in full working condition and ready for immediate release. Overview & Function The Watson‑Marlow 530S is part of their 500 series cased peristaltic/process pumps. Industrial Provider It’s used for precise fluid metering, dosing, or transfer in laboratory, industrial, pharmaceutical, food & beverage, water treatment, and other process environments. As a peristaltic pump, it works by compressing a flexible tube (or tubing element) with rollers or shoes, pushing fluid forward while the fluid never contacts moving mechanical parts (only the tubing). This gives isolation and reduces contamination risk Because fluid only contacts tubing, the risk of contamination or cross‑contamination is low, and maintenance is relatively straightforward (replace tubing / elements). Very good turndown ratio (i.e. ability to dial down flow finely) thanks to the wide speed control range. The user interface is designed for operational simplicity and clarity. Hodoxv Ak Iopfx Akrenu Offers flexibility in control: it supports analog and digital remote control, SCADA integration, and bus communication. Ability to use different pumpheads and tubing materials to suit pressure, chemical compatibility, and flow requirement

Condition: good (used), Fortress Technology Phantom metal detector Phantom Metal Detectors detect ferrous, non-ferrous, and stainless-steel contaminants using precision Digital Signal Processing Technology. A wide variety of aperture sizes are available to suit any application. An extra rugged casing is utilized for increased stability and performance in harsh environments. The Phantom’s high-quality build and straightforward interface enhance ease of use for the operator. Max width 24 cm Max height 25 cm More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Hjdoz Rfzkjpfx Akrsnu Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 2022, Features of the REV Rooster: High Speed: Processes up to 75 punnets per minute, 60% faster than traditional machines.Versatile: Suitable for both plastic and cardboard crates (IFCO, CPR, EPS, CHEP, etc.) and various punnet types, such as clamshells, cardboard packaging, and net packaging.Delicate Products: Ideal for fragile products such as strawberries, grapes, cherries, peaches, and tomatoes.Ergonomic and User-Friendly: Equipped with a color touchscreen and the intuitive R-Touch interface for easy operation and production insight. Hedpfxoz Rfk Eo Akrenu Used for punnets with pearsWithout an infeed conveyor for stacks of empty crates More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Hjdpfez R Tvwjx Akrsnu Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: used, Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN, Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick/Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from an industrial setting and has been professionally operated. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated force: 10 kN Type of test: Tensile and compression test Technical Performance Data: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnenn (nominal speed) Displacement resolution: 0.038 µm Positioning repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Data transfer to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Working space width: 440 mm Working space height (bottom): 1,050 mm Weight with typical components: approx. 160 kg Electrical Data: Adjustable mains voltage: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current consumption at 230 V: approx. 3.4 A Fuse rating: ≤ 16 A Connection: 1L / PE / N Documented test and calibration records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Hnedjzizrkspfx Akreu Temperature during testing: 23.3 °C Displacement measurement system: Incremental encoder (rotary) Force sensor installed 29.01.2014 Force sensor: Xforce HP Module: DCSC Calibration at Zwick Ulm 28.08.2013 Force sensor: Xforce P Module: DCSC Rotation before test series: 120° testXpert control system Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measuring module Force sensor Xforce P / Xforce HP Incremental encoder (rotary displacement measurement system) ISO 7500-1 compliant force measurement Installed under the traverse Important Note: “The table shown in the photos is not part of the sale.” Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force sensor DCSC module Specimens / Grips Adapters and holders Tools Documentation folder with documents Scope of delivery as shown in the pictures. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled   Item description:   For sale is a Weiss Technik TS 60 thermal shock test chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., according to IEC, MIL-STD, JEDEC) and has been well maintained.   Volume & Internal Dimensions:   Test volume: 60 liters   Internal dimensions of basket / test chamber (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm   Temperature ranges & cycling   Hot chamber +50 °C to +220 °C Cold chamber −72 °C to +70 °C   Transfer time (basket between both zones): < 10 seconds   Heating rate / heating speed up to 17 °C/min Cooling rate / cooling speed up to 3.7 °C/min   In single mode (cold zone only), heating rate: approx. 3.2 °C/min   Temperature deviation & homogeneity   Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C   Load / payload & lifting system   Basket / lifting system load: 20 kg maximum load capacity Transfer basket secured by protective grilles on all sides   Other features & equipment   Noise level: approx. 58 dB(A) during operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces   Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power approx. 8.5 kW Rated current approx. 25 A Fuse on customer's side 32 A Refrigerant R-404A / R-23   Weight: 800 kg Hnedpfx Akjzii A Rjrju   For your safety as a buyer, please note the following:   The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Stäubli Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots of the TX90 series, designed for medium payloads, offer maximum flexibility for a wide range of applications due to their compact and streamlined design. Thanks to the three mounting options – floor, wall, and ceiling – the six-axis robots are easy to integrate. The fully encapsulated design (IP 65) allows for use in cleanrooms or under harsh environmental conditions. Features Fully encapsulated design with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gearbox modules Large reach Advantages Perfect protection of the components. Standard version for cleanroom class ISO 5. Easy to clean. Excellent dynamic path behavior High flexibility Precision, dynamics, and speed with reduced maintenance Optimal use of the workspace Hodpfxozh U Sbo Akrjnu Technical Data TYPE TX90L Number of degrees of freedom 6 Nominal payload 6 kg Maximum payload 15 kg Reach 1200 mm Repeatability ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options Floor / Wall / Ceiling Controller Stäubli CS8 CS8C Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack-mount version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical Data: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) Working memory 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Technik Salt spray chamber / corrosion test cabinet Weiss Technik SaltEvent SC 1000 Corrosion test equipment / salt spray test chamber For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. The device is suitable for corrosion tests, salt spray tests, material testing, surface testing, quality assurance, as well as research and development. Technical data Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Device type: Salt spray chamber / corrosion test equipment Year of manufacture: 2019 Test chamber size: Size 1000 liters Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Shelf for machine part covers: 5 kg Temperature range salt spray test: Ambient temperature +5 K to +50 °C Temperature range condensation test: Ambient temperature +5 K to +42 °C Temperature compressed air humidifier: Ambient temperature +5 K to +70 °C Temperature stability over time: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking Temperature monitoring Interface Documentation as shown in the pictures Connections / media supply Power connection: 230 V / 50 Hz Compressed air connection available Connection for demineralized water available Exhaust connection available Water drain / condensate drain available Application areas Salt spray test Corrosion test Condensation test Material testing Surface testing Coating testing Automotive Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply 1x Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Accessories as shown in the pictures Documentation as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Hsdpjzg Er Asfx Akronu Inspection possible by appointment. Loading with a forklift is available. Shipping or freight forwarding is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Stäubli Type: TX90L robot / CS8C controller Six-axis robot with controller For sale: a Stäubli TX90L 6-axis industrial robot including CS8C controller and original teach pendant. The robot is suitable for pick & place, assembly, handling, machine loading, as well as automation, testing and training applications. Programming via VAL3. Technical data – Robot Type: TX90L Axes: 6 Payload: 5–6 kg nominal, up to 15 kg temporarily Reach: approx. 1,200 mm Repeatability: ±0.035 mm Wrist protection rating: IP65 (IP67) Mounting: Floor / Wall / Ceiling Robot weight: approx. 113 kg Hodpfxjzix Uce Akrsnu Technical data – Controller Controller: Stäubli CS8C Software: VAL3 s6.7.1 Programming language: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Power supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection rating: IP20 Controller weight: approx. 50 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) Stäubli TX90L robot arm CS8C controller Original teach pendant Connection cable (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by phone.

Condition: used, Stäubli Type: TX90XL robot / CS8C controller Six-axis robot with controller For sale is a Stäubli TX90XL 6-axis industrial robot, including a CS8C controller and the original teach pendant. The TX90XL is suitable for pick & place, assembly, machine loading, part handling, as well as automation, testing and training applications. The XL version offers a large reach for flexible applications. Programming is done via VAL3. Technical data – Robot: Type: TX90XL Axes: 6 Payload: 4 kg Reach: approx. 1,400 mm Repeatability: ±0.035 mm Protection class, wrist: IP65 / IP67 Mounting: Floor / Wall / Ceiling Weight: approx. 115 kg Hodpfezix Uijx Akrenu Technical data – Controller: Controller: Stäubli CS8C Software: VAL3 Programming languages: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection class: IP20 Weight, controller: approx. 50 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) Stäubli TX90L robot arm CS8C controller Original teach pendant Connection cable (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, CTS Type: TS -70/1000-10 For sale: CTS temperature test chamber, model TS -70/1000-10. Cooling: water-cooled refrigeration unit. Compressor has been replaced! Hnodeziizyopfx Akrju Features: Multi-touch control USB and Ethernet interfaces Feedthroughs for test cables, 4 × Ø 125 mm Safety temperature limiter Application areas: Environmental and durability testing Temperature cycling tests (stress screening) Quality assurance and research & development Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: Height approx. 1000 mm, width approx. 860 mm, depth approx. 1100 mm External dimensions: Height approx. 1950 mm, width approx. 1270 mm, depth approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are reserved!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Material Testing Machine, 20 kN, Tensile & Compression Testing, testXpert III For sale is a high-quality Zwick / Roell material testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. The machine is controlled via a PC with Zwick/Roell testXpert III software (storage medium and documentation available). Technical Data: Nominal testing force: 20 kN Testing direction: Tensile & Compression Power connection: 230 V / 50–60 Hz / 1-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical Data (from documents & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: Tensile & Compression Hjdpfx Aszimgtokronu Max. testing frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Overall height: approx. 1,545 – 2,114 mm (depending on the crosshead position) Overall width: approx. 856 mm Overall depth: approx. 650 mm Working space width: 440 mm Weight: approx. 150 kg (basic unit) approx. 180 kg with typical equipment Electrical Data Power connection: 230 V AC Phases: 1-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Socket: Schuko (CEE 7) Measuring & Control Electronics Internal measurement value acquisition: 500 Hz Data transmission to PC: 10–100 Hz adjustable Interface: RS232 (COM) Protection class for electronics housing: IP32 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of supply: (See picture) Zwick / Roell material testing machine (20 kN) Electronics unit PC workstation (monitor, PC condition see pictures) 2 measuring modules (Delock units) Zwick/Roell testXpert III software (storage medium) Original operating and technical documentation Various connection and linking cables (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Thermo Fisher Scientific Thermo Fisher Scientific Flash 2000 CHNS O Analyzer with 2 x AI AS 1310 Autosamplers For sale is a used Thermo Fisher Scientific Flash 2000 elemental analyzer. The unit is equipped with two AI AS 1310 autosamplers. It is designed for automated laboratory operation. The system is used for elemental analysis in the laboratory. Sample introduction is performed via the installed autosamplers. This enables continuous and automated operation. Equipment and features: Thermo Fisher Scientific Flash 2000 CHNS O Analyzer 2 x AI AS 1310 Autosamplers Front display with status fields for operating states Gas connections for He and O2 RS232 interfaces and other device interfaces Connections for autosamplers and additional modules Power connection 230 V Accessories and parts as shown in the pictures Technical data: Manufacturer: Thermo Fisher Scientific Model: Flash 2000 Voltage: 230 V AC Frequency: 50-60 Hz Fuse: 2 x 6 A Power: 1400 VA Autosampler: Model: AI AS 1310 Supply: 24 V DC Power: 46 W per unit Serial numbers: 420126446 and 420126487 Dimensions (approx.): Main unit: Width approx. 55 to 60 cm Depth approx. 55 to 65 cm Height approx. 50 to 60 cm Overall width with 2 autosamplers approx. 100 to 120 cm Weight (approx.): Main unit: approx. 45 to 60 kg Autosampler: approx. 8 to 12 kg each Total: approx. 60 to 80 kg Condition: Hnedpfx Akoy D Sqvjrsu Used, with typical signs of wear and tear due to age and use. The condition corresponds to the pictures. Scope of delivery: Flash 2000 Analyzer 2 x Autosamplers Accessories and cables as shown in the pictures Important note: All information has been provided to the best of our knowledge, based on the pictures, nameplates, and manufacturer information. The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by phone.

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Hnjdpoy Hkd Hofx Akrou Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Keysight Mixed Signal Oscilloscope / Digital Storage Oscilloscope Keysight / Agilent InfiniiVision MSO-X 3034A 350 MHz Mixed Signal Oscilloscope with 4 analog channels, 16 digital channels, and 4 GSa/s sampling rate For sale is a used Mixed Signal Oscilloscope from the manufacturer Keysight Technologies / Agilent Technologies. The device is suitable for precise signal and measurement tasks in development, laboratories, service, training, research, as well as industrial electronics and quality assurance. Technical data Manufacturer: Keysight Technologies / Agilent Technologies Type: MSO-X 3034A Series: InfiniiVision Device type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz Analog channels: 4 Digital channels: 16 Max. sampling rate: 4 GSa/s Display: Color display MegaZoom technology Inputs: 4x analog BNC inputs Digital input / Logic connector USB port USB Device / USB Host Trigger Out Ext. Trigger / Calibration connector Power connection: 100 - 240 V AC 50 / 60 Hz Power consumption: max. 100 W Dimensions: approx. 381 × 204 × 142 mm Weight: approx. 4 kg Features Large color display Front-panel control buttons 4 analog channels 16 digital channels USB interfaces Trigger functions Analysis functions Measurement functions Storage and printing functions Carrying handle Accessories as shown in the pictures Application areas Electronics development Laboratory Service Hnsdpfx Akjzh I Dwereu Troubleshooting Signal testing Printed circuit board testing Training Research and development Quality assurance Industrial electronics Scope of delivery Keysight / Agilent InfiniiVision MSO-X 3034A 3x probes as shown in the pictures Power cable Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Device can be switched on Display and operation appear to be functioning properly Test seals / stickers as shown in the pictures are present Weight: approx. 4 kg The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, ESPEC Temperature Shock Chamber ESPEC TSA-72EL-A Temperature Shock Chamber Water-cooled For sale is a used ESPEC temperature shock chamber, model TSA-72EL-A from the manufacturer ESPEC CORP. This chamber is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, automotive applications, quality assurance, and research and development. Technical Data Manufacturer: ESPEC CORP. Model: TSA-72EL-A Type of equipment: Temperature Shock Chamber System: 2-zone testing with damper switching Design: Air-cooled Test chamber volume: approx. 72 liters Internal dimensions of test chamber (W × H × D): 410 × 460 × 370 mm External dimensions (W × H × D): 1310 × 1900 × 1470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Hedpfx Akozhkfqjrjnu Preheating temperature: up to +205 °C Pre-cooling temperature: up to -75 °C Heating time: from ambient temperature to +200 °C within approx. 15 minutes Cooling time: from ambient temperature to -70 °C within approx. 40 minutes Temperature recovery condition: +125 °C / 30 min. to -40 °C / 30 min. Temperature recovery time: within approx. 5 minutes Max. test chamber load: 30 kg evenly distributed Cable entry: Ø approx. 50 mm Compressed air supply: 0.4 to 0.7 MPa / 4 to 7 bar Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Power supply: AC 400 V / 3 phases / 50 Hz Max. current consumption: 45 A Features Color touchscreen control TFT color LCD, 10.4 inches PID temperature control Program memory Trend graphics Alarm history Eco mode Automatic defrost RS-485 interface Over-temperature / under-temperature protection Vertical sliding door Stainless steel test chamber Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulating air fan Damper drive via air cylinder 2 stainless steel test inserts Cable entry, Ø approx. 50 mm Application areas Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Component testing Material testing Quality assurance Research and development Condition Used Optical condition as shown in the images Scope of delivery 1x ESPEC TSA-72EL-A Temperature Shock Chamber 2x Stainless steel test inserts Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Inspection possible by appointment. Forklift available for loading. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Anton Paar Modular Rotational Rheometer / Precision Rheometer Software: Anton Paar Rheoplus (original CD included) Device driver and license diskette available Anton Paar Physica MCR 301 Professional rotational and oscillatory rheometer for research, development, quality control and material testing For sale is a used rotational rheometer from the manufacturer Anton Paar. The device is suitable for highly precise rheological characterization of liquids, polymers, dispersions, emulsions, pastes, gels and other materials. The MCR 301 is one of the professional laboratory instruments for research, development, quality assurance and industrial material testing. Technical data: Manufacturer: Anton Paar GmbH Type: Physica MCR 301 Device type: Modular rotational rheometer Measuring principle: Rotational and oscillatory rheometer Drive: Air-bearing EC servo motor (Air Bearing Technology) Normal force measurement integrated Modular measuring system for different measuring geometries Power connection: AC 100–240 V Mains frequency: 50–60 Hz Power consumption: 850 W PC connection: RS-232 / Ethernet (depending on the configuration) Software: Anton Paar Rheoplus Operation via LCD display and membrane keypad Environmental conditions: Operating temperature: 15 °C to 35 °C Recommended ambient temperature: 23 °C ±3 °C Storage temperature: -20 °C to +50 °C Relative humidity: 20–60 % (non-condensing) Hnodozicwuopfx Akrju Dimensions: approx. 610 × 420 × 670 mm (L × W × H) Weight: approx. 48 kg Measurement possibilities: Rotational measurements Oscillatory measurements Viscosity measurements Flow curves Shear stress Creep tests Relaxation measurements Amplitude sweeps Frequency sweeps Material characterization Equipment: Air-bearing precision drive LCD display with control panel Electronic control Measuring head Measuring platform PC interfaces Rheoplus software CD Original documentation Operating manual Diskette with software data Connection cable Accessories as shown in the pictures Application areas: Research & Development Laboratory Quality assurance Chemical industry Pharmaceutical industry Cosmetics industry Food industry Polymer technology Materials science Universities Testing laboratories Scope of delivery: Anton Paar Physica MCR 301 Original Rheoplus software CD Original operating manual Documentation folder Diskette Connection cable Other accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age are present. Nameplate is present. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder or parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone or email.

Condition: used, Thermo Scientific Type: Herasafe 2030i 1.5 Hnjdpfx Aozd Udpokreu Safety Workstation The Herasafe 2030i series of biological safety cabinets leverages years of experience in global leadership in BSC design, incorporating groundbreaking innovations to optimize contamination prevention, user-friendliness, and information management, and delivers the most technologically advanced Class II cabinets on the market. Equipped with "intelligent" safety features for self-monitoring, an intuitive graphical touchscreen user interface, and integrated connectivity for maintaining critical performance data, the Herasafe 2030i impresses with its performance and unparalleled precision for demanding cell culture applications and other sensitive tasks that require a high level of safety for product, personnel, and the environment. Suitable for working with BSL 1, 2, and 3 pathogens, EN1822 standards, dual DC motors, DAVe Plus, SmartFlow Plus, and SmartClean Plus. Features an intuitive touchscreen interface, a working height of 20 cm, electrically operated window, segmented work surface in 30 cm sections, and 316L stainless steel interior. Certified by TÜV Nord according to EN12469. Includes the option of a Thermo manually adjustable base, 1.5 m. Dimensions (L x W x H) external: 800 x 1600 x 1536 mm Dimensions (L x W x H) internal: 627 x 1500 x 780 mm 230 V, 9 A, 2010 W Condition: used / like new (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, 3D Systems Type: ProJet 3000 HD Uninspected ProJet 3D printers The ProJetTM HD 3000 prints precise plastic parts for use in functional tests, as communication models, for rapid manufacturing, rapid tooling, and other applications. With features such as a wide selection of materials, various resolution modes, and ease of use, these office-friendly 3D printers accelerate and maximize your return on investment (ROI). Printing Modes: HD - High Definition Hnsdpfx Aszdnnuskrsu UHD - Ultra High Definition Net build volume (xyz) HD mode: 298 x 185 x 203 mm UHD mode: 127 x 178 x 152 mm XHD mode: n/a Resolution: HD mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness UHD mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD mode: n/a Accuracy (typical): 0.1 - 0.2% of part dimensions Accuracy depends on build parameters, part geometry, part placement, and post-processor settings Email notification: No Build materials: VisiJet® EX200 build material: Durable solid material with a long service life VisiJet® SR200 build material: Cost-effective, multi-purpose material. Available in natural, blue, or gray. VisiJet® HR200 build material: Available in blue, specifically developed for investment casting applications. Support material: VisiJet® S100 support material: Non-toxic wax material for melting the supports without manual intervention Power supply: 100-127 VAC, 50/60 Hz, single-phase, 15A Dimensions (L x W x H) printer without packaging: 737 x 1215 x 1504 mm Weight: printer without packaging: 254 kg ProJet Accelerator Software: Easy setup of the print job, template and queue management Automatic part placement and processing optimization tools Extensive part file editing tools Automatic support generation Job statistics Network compatibility: 10/100 Ethernet interface Hardware requirements: 1.8 GHz with 1 GB RAM (Open GL support 64 MB video RAM) or more Operating system: Windows XP Professional, Windows Vista, Windows 7 Supported file formats: STL and SLC Ambient temperature: 18-28 °C Noise level

Condition: used, TRUMPF   TRUMPF TruDisk 4002 (4 C) High-performance solid-state disk laser with up to 4 kW   Hsdjzii Nqopfx Akrjnu Type: TruDisk 4002 (4 C)   The TruDisk 4002 is a powerful, energy-efficient, and modular laser solution – ideal for industrial manufacturing environments with high demands on quality, precision, and automation. The combination of high power, excellent beam quality, and Smart Factory features makes it particularly attractive for modern production lines.   System type: TruDisk 4002 (4C) Manufacturer: TRUMPF Laser GmbH + Co. KG Year of manufacture: May 2012 Drawing number: 20-10-02-A3*   No further testing was carried out in-house. The operating hours could not be read out. The laser ran perfectly until the end.   Technical features:   Power & wavelength: 80–4000 W at 1030 nm Beam quality (BPP): typically 2 mm·mrad (up to 25 mm·mrad, depending on the configuration) Modular & compact: footprint < 1 m², modular design simplifies maintenance/service Efficient energy & cooling systems: Energy-saving modes, active power factor correction, pulse function to reduce consumption Flexible cooling: integrated heat exchanger (5–28 °C), optionally with compressor (up to 38 °C inlet temperature) Reflection-resistant: special resonator design is also suitable for highly reflective metals Industry 4.0 capable: extensive sensors + data interfaces for condition monitoring, OPC-UA, predictive maintenance   Possible applications:   Scanner & hybrid welding (e.g., body construction, shipbuilding) High-speed cutting, including on reflective metals Flame cutting & surface treatment Cladding, hardening, deep welding with high precision requirements   Technical data:   Supply voltage: 380 V (-10 %) to 460 V (+10 %), 3AC + PE Frequency: 50 – 60 Hz Power consumption: 23 kW / 25 kVA Rated current: 34 A at 400 V Degree of protection: IP 54 Short-circuit strength: Icn / SCCR 50 kA   Weight: 850 kg   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, CTS Type: T-70/600/S Water-cooled temperature testing chamber Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for external control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Refrigerant: R404A / R23 Weight approx. 700 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Hjdpfozg Ty Iox Akrjnu Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.