Used Incoplan Wood Dryer for sale (7,618)

Condition: used, maximum load weight: 24,200 kg, overall weight: 30,000 kg, axle configuration: > 3 axles, first registration: 11/2011, Equipment: ABS, Manufacturer HFR Model 30 t. 4 axles Timber transport / Wood transport Year 2011 Condition Good Serial Number UH9PX301125HF1141 Ref. nr. 7949 Reg. date: 25-11-2011 Bjdpfxow N Uuye Aggown Last seen: 10-12-2024 Disc brake: ? ABS: ? Rear axles: BPW Suspension: Air Tire Size: 265 / 70R19,5 Cover% left 100 - 100 - 80 - 100% Total weight: 30000 kg. Net weight: 5800 kg. Load capacity 24200 kg. Inside length: 7400 mm.

Condition: excellent (used), functionality: fully functional, power: 75 kW (101.97 HP), Good condition. Can be dismantled for a separate fee. Capacity : 75 - 100m3/h Power demand : 75kW Rotation speed : 1045 rpm Bwsdpfx Agey Ti U Degsn

Condition: used, functionality: unexamined, Jensen VT 16 Bwodpfoy Uiu Hjx Aggsn

Condition: used, functionality: fully functional, Girbau Gas Dryer Bwsdpfx Agey Ugr Negen 100 kg

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. 1 aftercooler, type WFN009 DHH16 Volumetric flow rate of air (normal): 540 m3/h = 9000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded connection (air): G 2" Threaded connection (water): G 3/4" Bjdpfx Asdzqn Usggown Weight of the aftercooler: 11 kg Dimensions of the aftercooler (L x W x H): 1030 x 850 x 200 mm + 1 water separator, type CSP 008 Volumetric flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All mounted as shown in the pictures. Height when mounted vertically: 2000 mm Total weight: approx. 40 kg

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Bwsdpfxoy Tiyao Aggon A total of four dryers of this model are available.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Bsdpfx Aoy Th Ipsggewn Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available.

Condition: good (used), Year of construction: 2012, Slow-speed machine with a push-floor system. Bwodjy T Ef Eepfx Aggjn Rotor width: 830 mm. Large rotor with 38 blades. Blade size: 40 x 40 mm. 22 kW motor. Screen aperture: 25 mm.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Bwodpey Thw Rjfx Aggsn Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw

Condition: used, Year of construction: 2010, machine/vehicle number: 0226, functionality: fully functional, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, The used HELIOMAT 6K is a batch dryer specifically designed for the efficient drying of small quantities of plastic material directly before processing. It is particularly suitable for use in laboratories or when frequent material changes occur (e.g., small production runs). Batch dryer/pre-drying station with integrated absorption dryer, type TLZ 12.1. 6 x 15-liter V2A modules with sliding guide and discharge slide. 3 air filters. Recirculation air cooler. Weekly timer. 6 x red/green traffic lights indicating the end of the drying cycle or a fault at the docking station. Bedpey Tn Uvsfx Aggewn Automatic 6-stage air flow control via a frequency converter on the dryer fan. The unit is mobile. Module 10742 - 10746, 10293. Includes a dew point meter for the absorption dryer. For sale to commercial customers only, with no warranty.

Condition: used, Year of construction: 1997, functionality: fully functional, total length: 11,000 mm, RAPID Maschinenbau, TYPE: RSE, SERIES 1005, YEAR 1997 Operational. Used for cutting timber frame components and simple roof truss elements. -Horizontal swivel range from 15° left to 15° right, indicated on a display. -Vertical swivel range from 40° left to 90° right, indicated on a display. -Right-hand length stop, indicated on a display. -Documentation in German, including instructions on how to calibrate and reset. -Two-hand operation. -2 vertical clamping cylinders + 2 horizontal clamping cylinders. -Left roller conveyor, approximately 4000 mm long. -Right roller conveyor, approximately 6500 mm long. -Minimum operating air pressure: 6.5 bar. +Additionally, an industrial filter system EUROPAC CT-101, year 2008, is included. -The red box shown in the photo is not included. Bodpfoy Exxvsx Aggown youtube.com/shorts/pj_alOG0Xpo?si=MLVmkJXTL_xWzoif Please feel free to ask any questions or inquire about the price.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 3K 13/60, fuel type: electric, pre-crusher was used to pre-crush pallets after which they were turned to the right fraction in another shredder. Satrind can still be seen working and can be used immediately. Bwsdpfju Abkhox Aggen power 44 KW is 60 HP

Condition: excellent (used), Year of construction: 2000, FAMOT TNFJ under-spindle milling machine Brand: Famot Bwjdoy Twqyepfx Aggsn Model: Tnfj Description: Manufacturer: FAMOT Jvxnva Machine model/type: TNFJ Year of manufacture: 1966 MACHINE IS A COLLECTOR’S ITEM AFTER A COMPLETE OVERHAUL FAMOT MILLING MACHINE AFTER A COMPLETE OVERHAUL, NEW ELECTRICAL SYSTEM, NEW ELECTRICAL INSTALLATION, INTERCHANGEABLE SPINDLE FOR MORSE TAPER MACHINE. OVERALL CONDITION VERY GOOD. NEW MILLING MACHINE GUARD WITH NEW SUPPORT PLATES. THE MACHINE CAN BE USED AS A GRINDER. Year: 2000

Condition: new, Year of construction: 2026, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ♻ A shredding system integrated with a conveyor and magnetic separator offers a comprehensive solution for material processing and purification. ♻ The system consists of a powerful shredder capable of breaking down various materials, a conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal and a magnetic separator that efficiently removes ferrous or magnetic particles from the mixture, enhancing material purity and preventing equipment damage. Technical data: Shredder: ✔ Power: 30 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 38 ✔ Granulation: 10-50 mm ✔ Capacity: up to 8 m3/h* ✔ Filling opening: 2031 x 1565 mm ✔ Weight: 2450 kg Z conveyor: ✔ Frequency converter (adjustment of conveyor speed) ✔ Overband magnetic separator ✔ Length: 6500 mm ✔ Width: 350 mm ✔ Capacity: 0,5 kg/s Bedpfjtpwlrex Aggewn ✔ Power 0,25 kW ✔ Transport wheels 1 years warranty or 1000 working hours

Condition: new, Year of construction: 2026, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ♻ A shredding system integrated with a conveyor and magnetic separator offers a comprehensive solution for material processing and purification. ♻ The system consists of a powerful shredder capable of breaking down various materials, a conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal and a magnetic separator that efficiently removes ferrous or magnetic particles from the mixture, enhancing material purity and preventing equipment damage. Technical data: Bodpfx Astpvdhsggewn Shredder: ✔ Power: 22 kW ✔ Shaft length: 650 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 28 ✔ Granulation: 10-50 mm ✔ Capacity: up to 5 m3/h* ✔ Filling opening: 1446 x 1342 mm ✔ Weight: 1750 kg Z conveyor: ✔ Frequency converter (adjustment of conveyor speed) ✔ Overband magnetic separator ✔ Length: 6500 mm ✔ Width: 350 mm ✔ Capacity: 0,5 kg/s ✔ Power 0,25 kW ✔ Transport wheels 1 years warranty or 1000 working hours

Condition: new, Year of construction: 2026, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ♻ A shredding system integrated with a conveyor and magnetic separator offers a comprehensive solution for material processing and purification. ♻ The system consists of a powerful shredder capable of breaking down various materials, a conveyor which helps to evenly distribute the shredded material, ensuring a steady flow for further processing or disposal and a magnetic separator that efficiently removes ferrous or magnetic particles from the mixture, enhancing material purity and preventing equipment damage. Technical data: Shredder: ✔ Power: 30 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x19 ✔ Granulation: 10-50 mm ✔ Capacity: up to 7 m3/h* Bsdpfx Ajtpwh Soggswn ✔ Filling opening: 1446 x 1565 mm ✔ Weight: 2050 kg Z conveyor: ✔ Frequency converter (adjustment of conveyor speed) ✔ Overband magnetic separator ✔ Length: 6500 mm ✔ Width: 350 mm ✔ Capacity: 0,5 kg/s ✔ Power 0,25 kW ✔ Transport wheels 1 years warranty or 1000 working hours

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Bsdpfxsv Sqrps Aggewn Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput Bwodjx Af Rdepfx Aggen - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.

Condition: new, Year of construction: 2026, Delivery time approx. 3-4 months MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics Bodpfsd Dgw Uox Aggown - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine now available (ex-works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14+2 pieces, 40x40mm, reversible multiple times, Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 cbm, Hydraulically operated pusher Screen perforation of your choice (12 - 40mm) Extraction socket Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Additional row of knives + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the pusher from jamming. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control system for the conveyor belt and overband magnet + €2,750 net Bwsdpfxod E R D Ss Aggsn (start and stop synchronized with the shredder) - Special bearing + €1,540 net (rarely required. Closed, even more robust rotor bearing. May be considered for screens smaller than 15 mm or high fine content. Not necessary if bearings are greased approximately every 2 weeks in operation) Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. increase wear. We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight company and we will document the test with photos and videos.

Condition: new, Year of construction: 2024, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide Bwedjd Hkqhjpfx Aggsn - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: used, Year of construction: 2006, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 9,150 mm, inner dimension width: 1,900 mm, inner dimension height: 3,000 mm, number of chambers: 2, Drying chamber with trolleys on rails 2 trolleys dimensions: 2x 1900*3000*9150 2x 3kW fans Automatically controlled with adjustable drying programs Bjdpfx Agsy Sbutegown

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor Bedpfsr R Ewljx Aggown - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Year of construction: 2026, condition: new, I´m offering brand new stackers incl brand new belt conveyors to go with the stacker New design New Program New control system Bsdpfx Aey Tb Ivsggewn CE Marking Sew Motors for Sweeper, Length adjustment and Lift Sweeper cycle time 0,5 sec Wood Stack for boards from 450mm to 3000mm. With brick, zigzag and normal stacking. Sticks can be added as an optional. Technical info: Board length 450-3000mm Width 50-200mm Thickness 16-100mm Pack size 1200x1200 incl. pallet ( Max 2000 Kg)

Year of construction: 2026, condition: new, functionality: fully functional, I´m offering brand new stackers with CE marking New design New Program New control system Sew Motors for Length adjustment and Lift Bjdpfxsy Tb Hxo Aggswn Sew Motor for Sweeper, 60 boards pr Min / Or upgrade to servo 120 boards pr min Wood Stack for boards from 450mm to 1500mm. With brick, zigzag and normal stacking. Sticks can be added as an optional. Technical info: Board length 450-1500mm Width 50-200mm Thickness 16-100mm Board weight max 15 Kg Layer weight max 100 Kg Pack size 1200x1200 incl Pallet ( Max 1500 Kg)