Used Indumasch V 15 for sale (43,982)

Condition: ready for operation (used), coax 5-PCD-2 15 NC cartridge valve, used, normal signs of wear, 100% functional, scope of delivery according to photos Csdpfxsi D Umas Appsrc

Condition: ready for operation (used), Delta Elektronika SM 15-200 D power supply, used, in good condition, 100% functional, delivery contents as per photos Credpsx Eq Hfofx Appjc

Condition: ready for operation (used), Step-Tec HVCS230-S-20-1.2/15-3FD-HSK-A63 high-speed spindle Id. 6014.058.A.10e removed from Norte VS500 Speed, the thread on one of the connectors is damaged, see photo, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Codpfeul Ipnsx Appjrc

Condition: ready for operation (used), AXIOMTEK P6153PR-24VDC-R Touchscreen Monitor 15" SN:P71EAP140A00026, used, normal signs of use, 100% functional, scope of delivery as per photos Crjdpfx Apop Hrzhepsc

Condition: ready for operation (used), AXIOMTEK P6153PR-24VDC-R Touchscreen Monitor 15" SN:P72EAP190A00013, used, normal signs of use, 100% functional, scope of delivery as per photos Cedpfx Apep Hrzloporc

Year of construction: 2025, condition: new, Mesh bag packaging machine. Designed to handle PE mesh film to make pillow or gusset bags, suitable for packing fresh vegetable and fruits such as potatoes, onions, apples, cabbage, peas, carrots, pears, lemons, grapefruits, kiwi, etc.. Full stainless steel version, PLC controller and touch screen. Print mark sensor. Suitable films: PE-Net, Net-film combinations, etc.. Bag styles: pillow, gusset and gusset bag with handle holes. - Specifiations: film width: max. 800mm; bag length: 100-480mm; bag width: 160-390mm; max. speed of the machine in neutral: 15 cycles/minute; compressed air: 0.40m³/6bar; power: 220V, 4kW. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Cjdpfx Asv Nm Aropperc Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Packaging machine equipped with a vacuum module for premade Doypack pouches, block bottom pouches, flat bottom pouches and other stand-up bag types. Compact construction with horizontal production processes. Batch/date printer and modules for specific pouch properties such as zipper, spout, gusset shape can be optionally integrated at a surcharge. Bag detectors checking the correct placement and complete opening of the e.g. Doypack pouch. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. The vacuuming takes place immediately before the bag is sealed by means of a lance which moves into the bag. The PLC controlled machine is operated via touch screen. Specifications: stainless steel version (SS304); max. speed of the machine in neutral: 15 cycles/minute; bag width: 100-300mm; bag length: 100-350mm; compressed air: 0.2m³/min, 5.5bar; power: 220V, 20Amps, 1 phase. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Crsdpfx Apev Nll Sspjc Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2011, Front right slider Rear hinge / Codstvfz Depfx Appsrc

Condition: good (used), Year of construction: 2004, Offer 24455 Technical data: Crodpfxeuv Eyge Appjc - Saw feed via hand lever - Saw blade diameter 315 mm - largest opening width vice approx. 160 mm - Cutting range approx. at 90° approx. 100 mm - flat up to 135 x 80 mm - Cutting range Li + RE at 45° approx. 108 mm - flat up to 100 x 80 mm - Cutting range Li at 60° approx. 80 mm - flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm - Drive 400 V / 1.3 / 1.8 kW - Coolant device - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg

Condition: excellent (used), Belt dimensions 150 x 2170 mm Two belt rotation speeds Adjustable boot Both upper parts are adjustable at an angle of 0-30 degrees Adjustable grinding height Crodpfepq R Uaex Appsc

Condition: used, functionality: fully functional, Samco Unilev 15 Edge Sander Belt dimensions 150 x 2170 mm Two belt speeds Adjustable shoe Crsdpfx Ajycpz Uoppsc Tabletop adjustable at an angle of 0-30 degrees Adjustable grinding height Pneumatic sanding belt tension Sanding belt oscillation Motor power 3kw

Condition: used, Used machine Year of manufacture: 1988 Condition: well-maintained Equipment and technical specifications: - Length of worktables: 1,440 mm Credpfxexzl Aqj Appec - Total width of two worktables: 710 mm - Worktable tilt adjustment: 0 – 30 degrees - Working pressure: 6 bar - Sanding belt length: 2,170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10 – 20 m/sec - Vertical adjustment of oscillation unit: 125 mm - Air consumption: 25 NL/min - Electrical: 400 V / 2.9 kW Weight: 490 kg Availability: short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2012, fuel type: diesel, Round Wood Stacker Svetruck, Model TMF 15/11 Year of manufacture: 2012 Operating hours: 16,370 (according to meter) Total weight: 58,500 kg Overall machine dimensions (L x W x H): 11,400 x 3,900 x 6,000 mm Machine dimensions (disassembled - L x W): 7,500 x 3,900 mm Height without cab: 4,700 mm Height without mast and carriage: 4,300 mm Mast dimensions (L x W x H): 8,000 x 1,600 x 2,000 mm Grapple dimensions (D x W, closed x H): 1,400 x 3,600 x 4,200 mm Grab arm length (open): 5,200 mm, Grab arm height: 4,000 mm Front wheelbase: 1,500 mm Height (log pusher): 250 mm Rear wheelbase: 1,600 mm Height: 400 mm Lifting capacity (telescopic boom retracted): max. 15,000 kg Lifting capacity (telescopic boom extended): max. 11,000 kg Stacking height (telescopic boom extended, open grapple): 8,000 mm Stacking height (telescopic boom extended, closed grapple): 7,600 mm Reach from center of drive axle: max. 6,870 mm Drive: 6-cylinder Volvo diesel engine with 289 kW / 393 HP Displacement: 12,130 cm³ Transmission: Torque converter automatic 3 forward and 3 reverse gears Travel speed: 27 km/h Csdpfxjyq Aaaj Apperc Tire size: 18.00 x 25 Further technical information and pictures are available upon request. This description does not constitute a binding offer and may contain errors. No guarantee for the accuracy of all details.

Condition: used, Year of construction: 2012, Round Wood Stacker Svetruck, Model TMF 15/11 Year of manufacture: 2012 Operating hours: 16,370 (according to meter) Total weight: 58,500 kg Overall machine dimensions (L x W x H): 11,400 x 3,900 x 6,000 mm Machine dimensions (disassembled - L x W): 7,500 x 3,900 mm Height without cab: 4,700 mm Height without mast and carriage: 4,300 mm Cjdpsyq Aayjfx Appjrc Mast dimensions (L x W x H): 8,000 x 1,600 x 2,000 mm Grapple dimensions (D x W, closed x H): 1,400 x 3,600 x 4,200 mm Grab arm length (open): 5,200 mm, Grab arm height: 4,000 mm Front wheelbase: 1,500 mm Height (log pusher): 250 mm Rear wheelbase: 1,600 mm Height: 400 mm Lifting capacity (telescopic boom retracted): max. 15,000 kg Lifting capacity (telescopic boom extended): max. 11,000 kg Stacking height (telescopic boom extended, open grapple): 8,000 mm Stacking height (telescopic boom extended, closed grapple): 7,600 mm Reach from center of drive axle: max. 6,870 mm Drive: 6-cylinder Volvo diesel engine with 289 kW / 393 HP Displacement: 12,130 cm³ Transmission: Torque converter automatic 3 forward and 3 reverse gears Travel speed: 27 km/h Tire size: 18.00 x 25 Further technical information and pictures are available upon request. This description does not constitute a binding offer and may contain errors. No guarantee for the accuracy of all details.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, total length: 1,800 mm, total width: 800 mm, total height: 1,700 mm, Frequency-controlled 15 kW 4-in-1 screw compressor With compressed air treatment for laser applications Attached refrigeration dryer Integrated 4-way fine filter for clean, oil-free compressed air supply Working pressure -1.6 MPa (approx. 16 bar) Cedev Uqlzepfx Apperc Delivery rate 1.3 m³/min at 1.6 MPa Integrated pressure vessel approx. 330 l

Condition: ready for operation (used), Working table length 144 cm, working table width 71 cm, operating pressure 6 bar, working table tilting 30 degrees, sanding belt width 15 cm Csdewx H A Aepfx Apperc

Condition: new, Center height: 250 mm Swing diameter over slide: 350 mm Swing diameter in the bend: 695 mm center width: 1500 mm spindle nose: DIN 55029, Camlock, size 6 bed width: 305 mm cross slide travel: 272 mm top slide travel: 155 mm spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth thread: (45) 2 - 72 TPI Metric thread: (39) 0.2 - 14 mm Diametrical thread: (21) 8 - 44 D.P.I. Module Thread: (18) 0.3 - 3.5 Module Longitudinal feeds: 0.04 - 1.00 mm/rev face feeds: 0,02 - 0,50 mm/rev motor power: 5,5 kW dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg Features: - Toolmaker accuracy - Infinitely variable speed control (3 preload stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base frame - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gear with large feed range running in closed oil bath. - Low maintenance central lubrication - Removable bridge. - CE Equipment: Cedpfx Apjgt E Ilspsrc - 3-axis digital display (resolution 0.005 mm) - frequency converter - Machine stand with high splash guard rear wall and integrated lighting - Chip tray can be pulled out to the front - 3-jaw lathe chuck - Fixed steady rest - Moving steady rest - Micrometer bed stop - Oil cooler - Two emergency stop pushbuttons and foot pedal with electric braking device - Limit switch protected chuck, rotating steel holder protection and cover of the lead and pull spindle according to the European safety standards CE - Coolant device - Fixed center punch - Reducing sleeve for main spindle - Operating tool in tool box

Condition: used, Year of construction: 2019, Highly flexible vertical machining center for milling, drilling and cutting. The BREMA patent for processing vertically, allows this series of machines to be the most flexible and productive machine par excellence to a very high quality level. Furthermore, the automatic return / rotation system of the panel makes it fully automated. Possibility of working in height up to 1300 mm, working on all 6 sides of the panel. Working dimensions: * length 300 - 2500 mm * height 60 - 1300 mm * thickness 10 - 80 mm * max weight 50 kg Machine programming and control system with PC - TPA Albatros software. Programming editor with a high-level software interface allows you to program the machine easily and intuitively and also allows: * linear, circular and helical interpolation * double zero reading * mirror program management * optimizer for revolver tool diameter * optimizer for independent spindle diameter * DXF file conversion (geometric conversion) * import of work lists in ASCII format * extra key for programming from the office * gun barcode reader * 17” LCD monitor * Windows 7 professional operating system Panel introduction and handling by means of motorized vertical transfer with rollers and rubber-coated pressers for sealing of the panel during the workings, with a motorized carpet length of 2000 mm, with speed regulation electronically adjustable with converter. The photocells and the NC program guarantee the introduction of one or more panels in sequence using selector. Panel height reading system consisting of an independent axis able to read the panel height before getting into the car. Size reading tolerance +\- 0.15 mm. In case the tolerance is exceeded a message will inform the operator and the machine will stop the operation in progress. Panel thickness reading system using a mechanical feeler Horizontal vice - M.O. axis which allows the thickness of the workpiece to be established from the program. Vertical vice - M.V. axis which allows the program to establish the height dimension of the piece being processed. Chain - X axis - patent double section with laser photocells able to read the reference zero of the panel before carrying out the work. The double section allows you to carry out machining on the lower side of the panel thus having the possibility of work the panel on 6 sides. Brushless motors with programmable speed regulation by NC. Drilling unit with independent spindles 7 + 17 x 32 mm 24 independent spindles with 32 mm pitch arranged as follows: Cedpsl Ikzgjfx Appjrc * 7 spindles aligned in X axis * 17 spindles aligned in Y axis Unit driven by a high-frequency motor that allows the rotation change of the spindles up to 7000 RPM The Brushless motor allows drilling depth control and forward speed control. Upper revolver milling group with 10 positions and tool change controlled by NC. 11 KW motor with direct transmission of movement to the tool up to 18000 RPM. The rotation of the revolver generated by controlled axis with Brushless motor allows quick tool change. 10 aggregate heads included in the revolver Automatic lubrication 180° panel translation and rotation system Movement and rotation system of the panel arriving from the machine which allows unloading or rotation of the panel and the return to the machine for machining on both surf

Year of construction: 2012, condition: excellent (used), Window production line WEINIG consists of: Unirex 3000 machining center Credjh H Iyxspfx Appec Univar 15 Unitex 15

Condition: excellent (used), MEMBRANE PRESS For overlaying MDF shaped workpieces with PVC, PP and PET With VARIOPIN system Double Automatic front loading/unloading and preparation table (1500 x 2800 mm tray) Max pressure 2,400 KN Working pressure 320 BAR Dimensions of the Platens tables mm 1500 x 2800 Useful working dimensions mm 1250 (or 2 x 600) x 2550 Cedpfx Asrwxz Roppsrc Front loading side from mm 1500 (useful width mm 1250) Separate electrical cabinet and controls ( Electronic Programmer SIEMENS SIMATIC Panel Touch Total Installed power KW 50 ca. OPTION: "Paternoster" reels Store (magazine) Unwinder (reels holder) with coating sheet cutting system

Condition: new, Chip Screen Manufacturer: Vecoplan Module: VSS 15/2 Year: 2016 Screening area: 1.5m2 Number of screen floors: 2 pcs Length: 3900mm Width: 1750mm Height: 1950mm Crsdpfx Aewqmpaeppsc Weight: 2300kg

Condition: excellent (used), Year of construction: 2015, volume flow: 2 m³/h, operating pressure: 10 bar, pressure: 10 bar, Equipment: refrigerant dryer, BOTTARINI KSV 15 screw compressor Variable speed (inverter-driven) With integrated refrigerant dryer 15 kW motor, Capacity 2 m³/min, Pressure 10 bar Year of manufacture 2015 Compressor is fully operational. Crjdswxzf Eepfx Appjc

Condition: excellent (used), Samco Unilev 15 Edge Sander Crjdpfx Aexd Rl Nsppoc Belt dimensions 150 x 2170 mm Two belt speeds Adjustable shoe Tabletop adjustable at an angle of 0-30 degrees Adjustable grinding height Pneumatic sanding belt tension Sanding belt oscillation Motor power 3kw

Condition: good (used), Power: 15 KVA Execution: 530 mm Crjdpfem Twicjx Appjc

Condition: good (used), Year of construction: 2012, Power: 320 KVA 3x400 V / 3x 200 / 115V Year of manufacture: 2012 Csdshzr Uyspfx Apperc