Used Kässbohrer Tieflader Mit Hydr. Schwanenhals for sale (10,823)

Condition: new, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, total height: 1,180 mm, Equipment: ABS, Availability: Immediately NEW VEHICLE Kässbohrer Platform Light MEGA SPS 3 # Empty weight 6,100 kg # Fifth wheel load 15,000 kg # Fifth wheel height: 980mm # BPW axles with disc brakes # 1st axle as lift axle # Jost support feet 24t # Wabco 4S/2M EBS with RSS Lredpjvm Nm Isfx Agrot # 2 x 7 and 1 x 15-pin electrical connections # 24V lighting system Aspöck # Tires 6 x 445/45 R19.5 branded tires on steel rims # 2 plastic wheel chocks Equipment: # 30 mm hardwood floor # Over-width device (4x over-width panels galvanized with LEDs + 1x rotating beacon) # 2 stainless steel tool boxes in the direction of travel right & left # 6x2 Jost container locks, retractable # Stake holder mounted on front wall + 20 stanchions (1500 mm) # 4 rows of stake pockets # 10 x 2 stake pockets in the frame # 7 x 2 lashing rings 4t on the platform 108 lashing points in the outer frame with 2t each # Side walls 600mm high & removable including depot under the vehicle # Chassis KTL coated and painted in RAL 3020 # Front wall RAL 3020 ----Errors, changes and prior sale reserved! Location: KTH-Trailer GmbH in Goch

Condition: new, maximum load weight: 36,020 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our full vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Complete equipment details available on request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate above the axles Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating covering C40/5 (point load approx. 2.8 t on a surface of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections and hydraulic lifting system * Maximum load per pair: 30,000 kg Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock activated via reverse gear and manually * Air suspension with raise/lower valve Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations, LED lighting 24V ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to guarantee optimum corrosion protection * Finishing coat: 2 layers 2K topcoat, solid colour RAL 3002 carmine red as per RAL system 841GL * Rear section metallised and painted RAL 9010 (pure white) Ledpfx Agey Auhuersrt * Rims in silver Included accessories: * One bracket for warning signs on the gooseneck and at the rear left and right, including socket * 1 spare wheel holder under the loading area, right in the direction of travel * 2" kingpin * One galvanized steel front wall * Yellow-red air couplings on the galvanized front connection bar * 4 wheel chocks with brackets on the bulkhead * 3 height wooden boards * Galvanized folding supports under the loading area bevel * Bracket for rotating beacon at rear of trailer * Height-adjustable tarpaulin structure – approx. 3,960 mm * Galvanized front wall with tensioning system for sliding curtains, height adjustable by approx. 400 mm * EDSCHA roof, sliding forward on aluminum roof girder profiles (screwed to front and rear wall) * 3 pairs of sliding stakes in the loading area * The body is hydraulically extendable to the left and right at the rear by approx. 750 mm * Sliding roof with pivoting portal crossbeam * Sliding curtain with approx. 700 mm reserve length, ratchet straps at approx. 600 mm intervals. Height O

Condition: used, empty load weight: 16,200 kg, maximum load weight: 48,050 kg, overall weight: 64,250 kg, axle configuration: > 3 axles, first registration: 08/1976, loading space length: 7,800 mm, loading space width: 3,150 mm, loading space height: 1,380 mm, total length: 13,100 mm, suspension: steel, tire size: 445/65R22.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 4 axles, Kässbohrer axles, leaf suspension, forced steering, lashing rings, 2-piece loading ramps, front support. Bodywork: 750 mm ramp width, fifth wheel height 1550 mm, king pin 3 ½", 4 x 13t axles, 4 axles with hydraulic forced steering, overall length 13,100 mm. ACCESSORY DETAILS WITHOUT WARRANTY, subject to modifications, intermediate sale and errors excepted! Lrodpjxyzyiefx Agrjt

Condition: used, maximum load weight: 30,850 kg, overall weight: 35,500 kg, axle configuration: 3 axles, first registration: 07/2017, loading space volume: 35 m³, Equipment: ABS, Kässbohrer cement silo 35,000 liters 3 axles, air suspension, pneumatic handrail, BPW axles, disc brakes, ABS. Unladen weight: 4,650 kg Payload: 30,850 kg Lrsdpfx Aoxthh Hjgrot

Condition: used, functionality: fully functional, empty load weight: 10,210 kg, maximum load weight: 35,790 kg, overall weight: 46,000 kg, axle configuration: 3 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, loading space length: 8,500 mm, loading space width: 2,525 mm, suspension: air, tire size: 235/75, tire condition: 80 %, color: silver, Equipment: ABS, Object number #31045 BPW axles Steering axle A3 Lift axle Drum brake Tires 235/75 R 17.5 Low-loader 8,500 x 2,525 mm Platform, front, including ramp 3,300 x 2,495 x 500 mm Ledpjz Dwdcofx Agrsrt Hydraulic ramps 4.65 x 0.72 m Excavator arm rest Bucket recess 2 pairs of wheel recesses 4x extendable warning signs Wabco Smart Board Can be widened to 3,000 mm Various heavy-duty tie-down straps ABS/EBS Raise/Lower LT aluminum support legs 2x rear support Work lights Side underrun protection Rotating beacon Perforated outer frame, platform, front Leasing or financing possible upon request!!!

Condition: as good as new (ex-display), Year of construction: 2018, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, warranty duration: 12 months, total height: 3,650 mm, type of input current: AC, total width: 2,200 mm, total length: 3,350 mm, overall weight: 6,100 kg, input voltage: 230 V, table load: 2,500 kg, We are selling our test and demonstration machine from our Solution Center. Further machines are available. Please feel free to contact us. Mitutoyo | CRYSTA Apex 122010 Coordinate Measuring Machine Coordinate measuring machine equipped with the latest Renishaw 5-axis technology, year of manufacture 2018. Measuring range XYZ: 1200 x 2000 x 1000 mm Dimensions (XYZ): 2200 x 3350 x 3650 mm Max. workpiece weight: 2,500 kg Measurement uncertainty MPE (E0): 2.3 + 3.0 x L/1000 in µm Equipment: • Renishaw UCC S5 controller, SPA3 servo amplifier, MCU5-2 joystick, I++ server • Temperature compensation with workpiece sensor • Active damping • Renishaw REVO 5-axis measuring system for single-point and scanning, incl. RSP2, 1x RSH175, 2x RSH250, and RSP3-3 kit (3xSH) including all probe changers • Modus measurement software, latest version with STEP CAD import, including 1 year software maintenance • PC system with Windows 11, 2 x 27" TFT monitors NEW, including height-adjustable desk • Control cabinet with current safety technology • Base plate M6 (loading drawer optional - see pictures) Original price in 2018 plus VAT: €245,640.00 Lrjdpsyibp Uofx Agrst Machine sales and service only available within Germany! Optional service package available: Delivery to site (free to kerbside) | Commissioning | Inspection | Accuracy acceptance according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and accessories available upon request

Condition: used, empty load weight: 16,200 kg, maximum load weight: 52,400 kg, overall weight: 68,600 kg, axle configuration: > 3 axles, first registration: 06/1979, loading space length: 7,800 mm, loading space width: 3,150 mm, loading space height: 1,380 mm, total length: 13,100 mm, suspension: steel, tire size: 445/65R22.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-piece drive-on ramps, front support, twin tires. Body: 750mm ramp width, fifth wheel height 1550mm, kingpin 3 ½", 4 x 13t axles, 4 axles with hydraulic forced steering, total length 13,100mm. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Lredpfx Ajwh Uipegret

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Ljdpfjz An Ilox Agrert

Condition: new, maximum load weight: 32,969 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,900 mm, loading space width: 2,390 mm, loading space height: 1,690 mm, loading space volume: 27 m³, total width: 2,550 mm, total height: 3,430 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer SKS.Y 27m³ Steel Tipping Body | BPW | Lift Axle | Cramaro | NEW Vehicle Description: For sale is a new Kässbohrer 3-axle steel semi-circular tipping body with a loading volume of 27 m³. The vehicle is ideal for the transport of sand, gravel, excavated material and other bulk goods. Technical Data: Kässbohrer SKS.Y / K.SKS B / 27-12/27 * 3-axle semi-trailer tipper * Loading volume: 27.0 m³ * Permissible total weight: 39,000 kg * Axle load: 27,000 kg * Kingpin load: 12,000 kg * Tare weight: approx. 6,031 kg * Loading length: 7,900 mm * Internal width: 2,390 mm * Overall width: 2,550 mm * Tipping body internal height: 1,690 mm * Saddle height: 1,220 mm * Overall length: approx. 8,675 mm * Vehicle height: approx. 3,430 mm Order_KB_254601-2 Order_KB_254601-2 Chassis / Axles: BPW AL II axles * 3 x 9,000 kg * Air suspension * Disc brakes * Lift axle on the 1st axle * Automatic EBS-controlled lift axle control * WABCO EBS 2S/2M * RSS stability control system * eTASC electronic/manual air suspension control * Automatic bellows discharge system when tipping * Tilt angle warning system at more than 3° inclination * KTL-coated chassis * High-strength S700 MC steel Order_KB_254601-2 Order_KB_254601-2 Tires: 385/65 R22.5 * Premium European tire brand, at Kässbohrer's choice * M+S tires * Steel rims ET 120 * 6 wheels Order_KB_254601-2 Tipping Body: Steel semi-circular tipping body * 27 m³ volume * Front wall: 4 mm HB450 * Side walls: 4 mm HB450 * Rear wall: 4 mm HB450 * Floor: 4 mm TUF500 * Mechanical rear gate with double hinge * Double compression lock * Rubber seal on the tailgate Order_KB_254601-2 Cover / Hydraulics: Cramaro Cabriole Type C * Electric cover system * Remote control * 300 mm bow height Ledsz Ec Uijpfx Agrert * 5-stage HYVA tipping cylinder * Max. working pressure 250 bar * Pneumatic operation * 2 m hydraulic hose Order_KB_254601-2 Additional Equipment: 2 work lights at the rear * Tire pressure monitoring system (TPMS) * Body-Fix system for stabilizing the tipping body * Plastic tool box * 40-liter water tank * Document box * Folding aluminum underrun protection * Aspöck Europoint III lighting * LED side marker lights * Automatic safety braking system when the tipping body is raised Order_KB_254601-2 Order_KB_254601-2 Order_KB_254601-2 Order_KB_254601-2 Color: Tipping body: Blue * Cover: Red We are happy to provide you with further information.

Condition: used, mileage: 300 km, power: 231 kW (314.07 HP), first registration: 04/2026, fuel type: diesel, overall weight: 30,000 kg, gearing type: automatic, Year of construction: 2026, Equipment: air conditioning, all wheel drive, crane, TECHNICAL CONSTRUCTION DESCRIPTION KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production year. Inspection/Initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in difficult terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting, and transport work in rough terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot TERRAIN CAPABILITIES ? Gradient climb: up to 60% ? Side slope: up to 40% ? Wading depth: up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive areas ? Ideal for work off paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control terminal ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Continuous slewing system ? Hydraulic six-section boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outrigger ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Special forestry work ? Work in moorlands and nature reserves Lodpfxjzdl Sdo Agrjrt ? Disaster relief and rescue operations ? Assembly and lifting work in hard-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most difficult conditions ? Economical alternative to mobile cranes in rough terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the PALFINGER PK 23002 SH E Power Link Plus mounted on it combines maximum off-road performance with powerful crane technology. Due to the extremely low ground pressure, the high payload, and the reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: used, maximum load weight: 30,754 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2019, next inspection (TÜV): 11/2026, loading space length: 7,200 mm, loading space width: 1,300 mm, loading space height: 2,420 mm, total width: 2,550 mm, total height: 3,150 mm, Equipment: ABS, Schmitz Cargobull tipper semi-trailer with 3 axles 2 units in stock Brakes: Drum brakes Axles: SAF Includes tarpaulin cover Lrjdpfoy Scpxox Agrjt Length: 7.20 m Width: 1.30 m Height: 2.24 m We would be happy to assist you with financing/leasing options through our partners. All information is subject to change without notice. Errors and prior sale excepted.

Condition: new, mileage: 40 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 3,000 kg, maximum load weight: 500 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, additional headlights, air conditioning, central locking, crane, differential lock, hydraulics, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, FUSO Canter 3S15 tipper truck with crane and remote control, delivery time 2 months, the vehicle is available for rent with an option to purchase. Chassis: Fuso 3S15 Canter - Gross vehicle weight 3500kg, payload of the finished vehicle with crane and tipper body approx. 500kg - Manual transmission - Limited-slip differential - Batteries 2 x 100 AH - Trailer coupling, ball hitch 3500kg with electrical connector (factory-fitted) - Heated exterior mirrors - Automatic climate control - Radio with hands-free phone system - Reversing warning system - Auxiliary drive with speed increaser - Battery cover and AdBlue tank cover - Preparation for battery disconnect relay - Traction tires Continental 195/75/R16C - Seat covers Aluminum tipper body - Controllable manually and via crane remote control - Internal dimensions: 2575 mm x 1775 mm x 400 mm - Prepared for side extension to 580mm - Loading height unladen 980mm - Aluminum floor - 6 lashing points, recessed, according to DIN EN12640 1000kg - Aluminum side walls, folding, upper edge protected - Rear wall with pendulum automatic and folding - Work light Crane: F32 with remote control, 3 x hydraulic, 1 x mechanical extensions - Lifting capacity according to manufacturer: 3.20m = 815kg, 4.40m = 575kg, 5.60m = 400kg, 6.80m = 300kg, 8.05m = 220kg - Design according to CE directive (EN 12999) - Slewing range 370° (mechanical slewing range limitation 190°) - All hydraulic cylinders are double-acting - Piston rods are hard-chrome plated - Pressure relief and load holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33l) with filter, mounted on the crane base - Support legs extendable on both sides, special support, support width 3.10m - Hydraulic support legs, swiveling 30° and 180° - CE, incl. M.O.L. - Standard color RAL 3020 traffic red - all cylinders painted black - Load hook and mounting brackets - Dead point above the support legs (cannot be tilted) - Painting with epoxy primer and topcoat: two-component or powder coating - Support plates - Articulated support plates (2 pcs) for support legs - CE version Lodpfx Aozv Nr Ejgrsrt - Subject to errors and prior sale. ?si=wuCaQnJSZ8LahUV9 ... Climate control, climate control system, VAT can be shown separately, ASR, ABS, radio, on-board computer, heated mirrors, electric immobilizer, central locking with remote control, trailer coupling, power steering, rev counter, limited-slip differential, tinted glass, spare wheel, twin tires, cab: short cab, electric windows, auxiliary headlights, thermal protection glass, auxiliary drive, crane, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, rentable, particulate matter sticker: 4 - green.

Condition: used, functionality: fully functional, empty load weight: 3,720 kg, maximum load weight: 14,280 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2025, next inspection (TÜV): 06/2027, suspension: air, tire size: 235/75 R 17,5, tire condition: 90 %, color: grey, Equipment: ABS, center pivot plate, Item number: 31046 BPW axles Drum brakes Twin tires 235/75 R 17.5 Hydropneumatic tipping gear 2 pairs of UVV lashing eyes Pneumatically lowerable drawbar Lifting/lowering function Lrjdpsz Dvr Sefx Agret ABS/EBS Toolbox Tool chest Work lights Duomatic coupling Side underrun protection Hot-dip galvanized 40 mm towing eye Leasing or financing options available upon request!

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: BE 05.20.1920, SHRINK TUNNEL KALLFASS COMPACT 650 S WITH FOIL PACKAGING MACHINE UNIVERSA 500 Commission No.: 25.156.72 Equipment / Additional information: WITH FOIL PACKAGING MACHINE UNIVERSA 500 (M. No.: M 05.20.1614 // Commission No.: 25.156.72) Technical Specifications Adjustable working height: 800 – 900 mm Tunnel opening width and height: 650 mm, 200 / 400 mm Length of heated tunnel hood: 1200 mm Power supply: 208 – 480 V Temperature: continuously adjustable up to 190°C Conveyor speed: 5 – 17.5 meters/minute Installed heating power: 13.5 kW Advantages Suitable for PE and PO films Maintenance-free plastic modular belt Ljdpfxjz D U N Ae Agrsrt Consistent heat transfer for perfect packaging results Efficient energy recirculation via ring-nozzle heating technology High-quality insulation and compact design for rapid heat-up times Easy adjustment of basic parameters Constant operating temperature without extreme fluctuations Easy maintenance thanks to carefully selected components

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2022, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 2,720 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 8,770 mm, color: white, Year of construction: 2022, Equipment: ABS, = Additional Options and Accessories = - Rear doors - Lift axle - Air suspension - Fog lights - Disc brakes - Toolbox = Additional Information = Axle configuration Tire size: 385/65 R 22.5 Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Lrjdpfjzyp Rcjx Agrjt Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 50%; Tire tread depth right: 40% Rear axle 2: Max. axle load: 9000 kg; Tire tread depth left: 80%; Tire tread depth right: 80% Rear axle 3: Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 90%; Tire tread depth right: 80% Weights Unladen weight: 7,740 kg Payload: 34,260 kg GVW: 42,000 kg Maintenance APK (Technical Main Inspection): valid until 12/2026 Condition Technical condition: very good Optical condition: very good Damage: none Identification License plate: OT-82-PR

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating Ljdpfozbr U Usx Agrjrt -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording -Separate control cabinet -Audible alarm and alarm light -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet -DGUV V3 test currently valid with report -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace

Condition: used, empty load weight: 18,500 kg, maximum load weight: 59,200 kg, overall weight: 77,700 kg, axle configuration: > 3 axles, first registration: 10/1978, loading space length: 9,650 mm, loading space width: 3,150 mm, loading space height: 1,100 mm, total length: 14,200 mm, suspension: steel, tire size: 8,25 R 15 PR 18, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: in transit, 6 axles, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-part loading ramps, front support, twin tires Body: 600mm ramp width, 1950mm between ramps, 6 axles, 3rd, 4th, 5th, and 6th axles hydraulically forced steered, fifth wheel height 1,550mm loaded, kingpin 3 ½", 6 x 10.55t axles, total length 14,200mm. Lsdjxwa Uyspfx Agrort All information provided without guarantee, as the vehicle is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: used, maximum load weight: 4,500 kg, overall weight: 6,500 kg, axle configuration: 2 axles, first registration: 07/1979, next inspection (TÜV): 04/2026, loading space length: 4,000 mm, loading space width: 1,900 mm, loading space height: 380 mm, total width: 2,500 mm, total height: 3,000 mm, Year of construction: 1979,

Condition: used, functionality: fully functional, power: 10 kW (13.60 HP), fuel type: diesel, empty load weight: 1,615 kg, Year of construction: 2018, operating hours: 3,542 h, drive type: Diesel, Mini excavator Condition: Ready for operation and fully functional Technical condition: good Ledpfez Edqfex Agrert Description: Mini excavator KUBOTA KX, year of manufacture 2018 - - 3542 operating hours - - 1615 kg operating weight - - HYDRAULIC quick coupler for attachments CW05 - - 2 pcs. digging buckets 25 + 35 cm - - 1 pc. ditching bucket 100 cm - - HYDRAULIC adjustable undercarriage 100 - 130 cm - - Work lights front and rear - - Full cab, heating - - 3-cylinder Kubota diesel engine 9.6 kW - - Rubber tracks approx. 50% remaining - - Hammer line available - - Excavator in good condition Quick coupler, buckets, 3rd valve, work light rear, work light front, heating, full cab.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We offer you: CNC machining center, universal, with pallet automation Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: Machine 2023 / Automation 2025 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Lrjdpfxjz A A Dxs Agrst Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4020 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Scraper-type chip conveyor with cleaned filter screen - Internal coolant supply (IKZ) 40 bar, consisting of: - Paper band filter - 600 l tank - Cabin roof - Rotary through-feed in the spindle - Double filter - Blow-off air through the spindle center - Rotating viewing window - Flushing gun for chip removal - Oil and emulsion mist separator - Infrared measuring probe, manufacturer Heidenhain TS 460 (if available) - Tool measurement system, manufacturer Heidenhain TT160 (if available) - Preparation for 3D quickSET - Automation interface PH Cell, consisting of: - Interface - 4-channel rotary through-feed - Automatic loading door - Operating mode 4 - Tracy surface interpolation - Pallet loading and unloading system PH 150, consisting of: - 10-position pallet storage - External electronic handwheel (if available) Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to change and errors in the technical data and information, as well as prior sale!

Condition: good (used), Year of construction: 2020, functionality: fully functional, total length: 9,000 mm, Adhesive application cell with ABB robot IRB 4600-60/2.05. Lrodpfxszz Agmj Agrst Included in the adhesive application cell: Robot (weight 425 kg, payload 60 kg, year of manufacture 2020) 7th axis + steel structure (unlike in the images, the axis and steel structure have been extended to approximately 9 m) Adhesive application units Protective fences, etc. Not included: Roller shutter doors Fixturing device (available separately) Detailed drawings available upon request.

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production run. Acceptance/initial registration is from 2026. Lrjdpfezgzavex Agret GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER PK 23002 SH E Power Link Plus loading crane ? Suitable for assembly, lifting, and transport work in difficult terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Can turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60% ? Side slope up to 40% ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Ideal for work off paved roads CAB ? Safety cab with ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Endless slewing ring ? Hydraulic six-stage extension boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning thanks to sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection system ? HPSC stability monitoring system ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Specialized forestry work ? Work in peatlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most challenging conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road capability with powerful crane technology. Due to its extremely low ground pressure, high payload, and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machines.

Condition: excellent (used), axle configuration: 3 axles, first registration: 10/2018, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, wheelbase: 8,770 mm, color: other, Year of construction: 2018, Equipment: ABS, = Additional options and accessories = - Central lubrication - Rear doors = Remarks = WKVDAF10300095134 = More information = Empty weight: 7.400 kg Carrying capacity: 34.600 kg GVW: 42.000 kg Technical condition: very good Visual appearance: very good Registration number: OR-76-ND = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Lodpfsymquqox Agrort Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, We offer you: Ljdpfx Agjz A A E Nsrert CNC machining center, universal, with robotic automation Manufacturer: DMG MORI Type: DMU 50 3rd with Lang RoboTrex52 Year of manufacture: Machine 2017 / Automation 2021 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 60 Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 32,000 h Spindle hours: approx. 12,000 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Drag chain chip conveyor - Internal coolant supply (IKZ) 40 bar, includes: - Paper band filter - Tank 600 l - Canopy - Rotary feedthrough in spindle center - Compressed air through the spindle center - Flushing gun - Oil and emulsion mist separator, mechanical - Infrared measuring probe, manufacturer Heidenhain TS 649 (if available) - Preparation for 3D quickSET - Operating mode 4 - ATC – Application Tuning Cycle - Tool breakage monitoring TRS2 (if available) - Tracy surface interpolation - Automation system Lang RoboTrex 52 Accessories, tools, and clamping devices shown in the images are only included in the scope of delivery if this is stated in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, empty load weight: 8,850 kg, maximum load weight: 31,150 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 08/2019, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading platform length approx. 9,500 mm, lowbed loading platform length approx. 7,360 mm, loading height approx. 910 mm, 14 pairs of lashing eyes. Vehicle is offered on behalf of the customer. -- Subject to errors, misprints, and changes. Sample images -- More data at: !, More Details: ! Ledoz Anzlepfx Agrjrt