Used Kaltenbach Kks for sale (244)

Condition: used, axle configuration: 3 axles, first registration: 08/2006, total length: 9,770 mm, total width: 2,450 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,790 mm, Year of construction: 2006, Equipment: ABS, = Additional options and equipment = - Lift axle - Air suspension Dedpfjywz Epox Ad Nocg = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 15%; Tyre tread right: 15% Rear axle 2: Tyre tread left: 15%; Tyre tread right: 15% Rear axle 3: Tyre tread left: 15%; Tyre tread right: 15% Weights Unladen weight: 3,850 kg Payload: 35,150 kg Gross vehicle weight: 39,000 kg Condition Damages: none Identification Registration number: OJ-20-KK

Condition: used, maximum load weight: 37,640 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 04/2014, next inspection (TÜV): 02/2026, loading space length: 9,230 mm, loading space width: 2,550 mm, loading space height: 900 mm, loading space volume: 21 m³, Equipment: ABS, * 2-line air connection * Rear support * Front landing gear * ABS * Lift axle * SAF axles ---- Structure: Kaessbohrer LB4E EX-1 KK Lowbed semi-trailer (2,350 mm/Gooseneck + 9,230 mm/Deck), loading height approx. 900 mm, extendable width up to 3,160 mm, extendable in 12 stages to a total length of 19,575 mm / Min. deck length 12,000 mm, max. 18,000 mm., 3rd and 4th axles with trailing steering, loading ramps - ALU. Steel/wood floor, lashing rings, twistlock mounts. Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE MUST BE PAID!!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our General Terms and Conditions (see imprint) form the basis of all purchase agreements, invoices, pro forma invoices, orders, and sales discussions. Dcjdjw Ririepfx Ad Neg

Condition: used, Year of construction: 2012, turning diameter 320 mm turning height 750 mm Control Siemens max. turning speeds 4500 min/-1 drive capacity - main spindle 26,8 / 20,9 kW max. torque 256 / 200 Nm spindle bore 52 mm spindle head KK A6 (DIN 55026) chucking diameter max. 315 mm number of tool places 8 Pos. tool taper Capto C5 max. workpiece diameter 50 mm max. workpiece weight 0,5 kg x-axis 450 mm Dsdpfxjxq Hkze Ad Nocg z-axis 300 mm rapid traverse x 45 / z 40 m/min total power requirement 68,3 kW weight of the machine ca. 11,0 t dimensions of the machine ca. L 3,7/4,2 x B 1,6 x H 3,0 m In our opinion, the machine is in very good condition condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 2001, condition: excellent (used), machine/vehicle number: R2D P1503, Spindle Ø (tong passage): 32 mm Max. Turning Ø: 140 mm Distance between the spindle noses: 720 mm Main spindle, mounting acc. To DIN 55026: KK 4 Passage in the draw tube: 32 mm Counter spindle, mounting acc. To DIN 55026: KK 4 Dcjdjf Ddafepfx Ad Neg Travel z: 510 mm Travel speed: 24 m / min Main spindle drive, AC motor: 10 kW Infinitely variable speed range: 0 - 8000 rpm Counter spindle drive, AC motor, power at 40% ED: 10 kW Infinitely variable speed range: 0 - 7000 rpm Disk turret tool system with directional logic, 25 holders Number of driven tools: 12 Rotation speed of the driven tools: 0 - 6000 rpm electr. Connection: 400 V Weight approx .: 3000 kg Required space: 2600 x 1980 x 2350 mm

Condition: excellent (used), Year of construction: 2018, HT 45 SM2Y / SIEMENS - with driven tools + Y-axis CNC turning machine for complete machining of turned/milled components with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on the main and sub-spindle (water-cooled), preloaded roller guides. Drive power: Dcsdpfx Ajwvlvvjd Neg Main spindle - 15 kW Sub-spindle - 15 kW Speed range: Main spindle 0 - 7,000 rpm Sub-spindle 0 - 7,000 rpm Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar capacity Ø 45mm) Sub-spindle: KK5 Y-axis: • Travel range: +40/-30mm • Rapid traverse: 15m/min Includes: • Hollow clamping cylinder on the main spindle • Draw tube for main and sub-spindle • Mechanical spindle brake (main/sub-spindle) • Part ejector and flushing through the sub-spindle • Sinumerik 840D-sl / OPERATE control o SHOPTURN dialog programming o USB interface o Network drive / Ethernet o 15" TFT color monitor o 3D simulation o and much more • 2x 12-station tool turrets VDI 25 radial version with directional logic for up to 2x 12 driven tool stations! Swivel speed adjustable via feed switch! Performance data: o Max. 4kW at 2080 rpm o Constant torque 16 Nm o Speed range 0-6000 rpm o C-axis for main and sub-spindle o TRANSMIT software for easy C-axis programming • Chip conveyor with programmable ejection height of 1100mm (Type "hinged belt") • Coolant system integrated into chip conveyor 2 pcs. high-pressure pumps, 14 bar each 2 pcs. flushing pumps, 3.7 bar each • Hydraulic unit • Machine light • Documentation Includes: DE6400 1 pc Control language German S3Z580 1 pc 22-inch multitouch operating unit HT45 X3Z160 1 pc Tool monitoring Siem. 840Dsl X3Z690 1 pc SHOPTURN/MILL expansion kit 840DSL/828D X3Z710 1 pc 4-axis turning/balance 840DSL/828 S3Z20S 1 pc Glass scale X1 SIEMENS S3Z21S 1 pc Glass scale Y1 SIEMENS S3Z23S 1 pc Glass scale X2 SIEMENS X1Z140 1 pc Loader interface A8, S2, S3, S4, S6, R2, R6, R9PM S30593 1 pc Surcharge for flat chip conveyor S3Z610 1 pc Tool measurement HT45 S4Z140 1 pc Coolant gun S3Z160 1 pc Cooling unit HT45 S3Z010 1 pc Oil mist separator MT45/HT45/E45 S3Y300 1 pc Band filter 600l+conveyor HT45 S30605 1 pc Preparation HT45 sub-spindle unloading S30595 1 pc Robot interface HT45 S30596 1 pc Interface to measuring station S30597 1 pc Interface for unloading unit S30598 1 pc Wireless measuring probe Renishaw S30599 1 pc Tool layout by Emco 990717 1 pc Loading system IRCO ILS-RBL-8008 990718 1 pc Unloading system IRCO ILS-REX-8008 ..... Year: 2018 Machine No. S3A182001

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-Axis CNC Turning Center with automatic tool changer, Y-axis and B-axis, for complete machining of turned-milled parts. Integrated spindle motors (ISM) on main and sub-spindle with thermocompensation system (liquid cooled). Dsdpsxz Ab Rsfx Ad Njcg Drive power: Main spindle - 29 kW Sub-spindle - 22 kW Speed range: Main spindle 0-5000 rpm Sub-spindle 0-7000 rpm Spindle interface (DIN 55026): Main spindle KK 6 (bore 65 mm) Sub-spindle KK 6 Y-axis: travel range +/- 50 mm The Y-axis is designed so that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control technology, includes: * Hollow clamping cylinder incl. draw tube * Part ejector and coolant supply through the sub-spindle * 12-position VDI 30 radial tool turret with directional logic for up to 12 driven tool stations Swivel speed adjustable with feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0-5000 rpm - C-axis for main and sub-spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished parts * Sinumerik 840D * Chip conveyor with a programmable discharge height of 1200 mm (hinged belt type) * Coolant system integrated in the chip conveyor: 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 flushing pumps with 3.7 bar * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine lamp * Interface for foot switch * Documentation Included: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Swing-out window - Cleaning gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Condition: excellent (used), functionality: fully functional, Commissioning: as Okuma stock machine 09.2017 Control OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor with 32 kW output Torque 955 Nm ▪ Hollow clamping cylinder Ø 127 mm SMW VNK 320-127 with bore Ø 127 mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance self-cleaning function ▪ Drum sump filter TMF300 with clean tank 980 l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for the lower turret) ▪ Automatic door ▪ Robot interface type E for connecting other loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in a CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22 kW / 700 Nm / 50–4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2-stage Range switching at full speed ▪ Lower turret: 12 stations In ZB-axis with cylindrical roller guide In XB-axis with slide guide ▪ Real-time collision avoidance system CAS ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touchscreen/panel with vertical display and tiltable keyboard (adjustable angle) ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° steps ▪ Y-axis with travel +150/-150 = 300 mm ▪ B-axis 240° Positioning in 0.001° steps ▪ Tool spindle (Okuma motor spindle): 22 kW / 120 Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. pressure 20 bar Including bag filter, external cooling tool spindle, pump with max. pressure 3 bar ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement system (with standard chuck) for safe setup Dcedsyviigjpfx Ad Nog ▪ Machine management MacMan with integrated BDE (operating data acquisition) ▪ Parts program memory 2 GB ▪ Max. length individual part program 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation via periodic speed change ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection) ▪ Coordinate conversion (shift, rotate) ▪ Electronic spindle orientation + / - 0.1°

Condition: good (used), Year of construction: 1987, functionality: fully functional, 1 x optical profile sanding machine Doebelie Dedpfx Asqu Rh Njd Njcg OP 125 X year of construction:1987 with dust extractor Esta KK 5 S in good condition. The machine can be inspected under power.

Condition: used, Year of construction: 1996, Bottle Filler and crown capper, make Krones, type: Mecafill VKV 24/KK 6-94 LM, 24 filling valves, Vacuum pump, hot water injection before closing, 6 head bottle cap closing, bottle burst control, Crown Cork feeder + bin electr. height adjustment, direction: counter clockwise / right to left. Dsdpfsunh I Aex Ad Nocg

Condition: new, pressure: 320bending length: 6050column width: 5100daylight: 650stroke lenght (max.): 350column throat depth: 450weight approx.: 23.1004 axes (Y1, Y2, X, R): Ja alle Achsen über Steuerung Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Steuerung Esa S630 (2D Grafik Steuerung)motor power: 30Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Dedsd Ehh Tspfx Ad Necg

Year of construction: 2021, condition: ready for operation (used), total height: 1,300 mm, product length (max.): 4,500 mm, Pipe Production Line manufactured in 2021. This Bazhou Wanxin machine features a dual-station decoiler, hydraulic shear and butt-welding machine, and a cold saw for precise cutting of pipes. It accommodates round pipes with diameters from Ø16-63.5 mm and offers a feeding speed of up to 120 m/min. Consider the opportunity to buy this Bazhou Wanxin Pipe Production Line. Contact us for further details. • Dual-station decoiler • Function: Passively unwinds the coil • Construction: Dual-station with 180° rotation; manual expansion • Advantage: Fast loading, simple operation • Hydraulic shear and butt-welding machine • Function: Cuts front/rear strip ends, centers, and re-welds • Construction: Manual hydraulic shear with boom; front/rear pressure rollers; front/rear centering rollers; welding device • Cutting method: Hydraulic shear • Pressing method: Double-cylinder press • Welding method: Manual welding • Coil accumulator • Function: Ensures continuous production during strip changeover • Construction: Frame type with movable and fixed frames (incl. feeding device) • Feeding speed: max 120 m/min • Storage speed: max 200 m/min • Stored strip length: 200–400 m • Pinching roller motor: AC 11 kW • Forming and calibration machine • Working height: +850 mm • Main drive power: AC/DC motor 160 kW, 1000–2000 rpm; reducer: gear-hardened; gearbox: spiral bevel gear • Entry/formation: Passive 5-roll straightener; vertical rolls for strip feeding; forming via 7 horizontal + 8 vertical roll stands • Guiding/pressing/deburring/cooling/calibration: 6 horizontal + 5 vertical roll stands; 1 round calibration stand • Round calibration stand: 1 smoothing device; 2 sides with 8 rolls (4 per side); Ø30 mm rolls, 40Cr, quenched/tempered/hardened • Horizontal roller shaft: Ø60 mm, bearing position 55, material 40Cr; surface hardening HRC 50–55 • Vertical roller shaft: Ø40 mm, material 40Cr, quenched/tempered/hardened • Bearing slider: Forged steel 45# • Stand style: Gantry type; opening width 120 mm; horizontal stand clamping adjustable via worm gear • Stands material: Welded, aging annealed • Pinching roller shaft: Ø50 mm, 2 rollers, manual screw adjustment • Guide shaft: Ø40 mm • Deburring knife: 2 pcs (1 in use, 1 spare) • Cooling tank: Included • Cold saw (Type KK-5-50) • Function: Cuts pipes to preset length at line speed • Pipe diameter: Round Ø16–63.5 mm (and corresponding square/rectangular) • Cutting length: 1–6 m • Material thickness: 0.6–2.5 mm • Saw motor: 11 kW AC with frequency inverter • Feeding motor: 2.9 kW servo (Yaskawa) • Drive motor: 11 kW servo (Yaskawa) • Feeding mode: Servo multi-stage speed • Speed following: max 110 m/min • Clamping: Pneumatic • Saw blade: Ø400 mm • Saw reducer: Model KK-80 • Sawing stroke (rack length): 3 mNote • The technical data and descriptions are transcribed from the original order confirmation and are for informational purposes only; they are not binding. Additional equipment • Conveyor track, table, and packing machine • Function: Automatic pipe transfer from mill to table; packages into hexagonal bundles • Roller track length: 16 m Dsdpeyhfvljfx Ad Necg • Drive: 1 motor YCT200-4A, 5.5 kW

Condition: used, 2 clamping plates for KK 8, ribbed cast iron plate, diameter 800 mm and 780 mm Dsdoyr R Dijpfx Ad Necg

Condition: excellent (used), Eccentric chuck with key (28134) in a sturdy wooden transport box Brand Klopfer Type EZ 32 Diameter 160 mm Diameter 265 mm Height 180 mm KK holder size 5 Cone diameter 82.575 mm Bolt circle diameter 104.8 mm Eccentric adjustment range 0 - 32 mm with one set of drilling jaws Dcsdpfx Ajgzlmzod Nog with one set of turning jaws 41.5 kg weight with case 55 kg Hole flange can be replaced if necessary

Condition: excellent (used), Epson G10-854SR Robot Assembly Station and Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 KK+SW Assembly Area, and 3.3 Front Assembly Area. (KK = Heat Sink, SW = End Wall Bracket) St. 3.1: Dispensing Area: - A workpiece carrier (WT) with mounted chassis and PCBs enters the dispensing area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. - The X-Y-Z handling moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling moves to the rest position, and the WT is placed back on the belt. - Continued transfer to the KK+SW assembly area (provided there is no WT in the mounting position). St. 3.2: KK+SW Assembly Area: - A WT from the dispensing area arrives in the KK+SW assembly area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. The chassis side walls of the partially assembled unit are aligned. - KK tray and SW tray positioning occurs simultaneously. - A stack of 12 KK trays and a stack of 12 SW trays are manually placed on their respective infeed conveyors outside the safety enclosure. - The two safety shutters are opened, and the loaded tray stacks move into the gripper position of the respective stacker. - The safety shutters are closed again. - The respective grippers pick up the corresponding tray. - The tray is separated using the Z-axis and transported upward (above the normal pick-up height). - For centering and stabilization, a centering support is positioned beneath each tray using X-axis handling. - With the stacker's Z-axis, the respective tray is placed on the centering support. - The trays are ready for component pick-up. - With the multi-gripper on the SCARA robot, the KK is picked up from the tray and placed in an intermediate position as an alignment aid (to achieve exact pick-up positions for assembly). - The KK is scanned, picked up again, and if the scanner result is OK, mounted onto the WT. - Any KK that is not OK is placed in a reject box. - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position. Dsdpfjibx S Njx Ad Necg - The SW is picked up again and mounted onto the WT. - Assembly continues in the front assembly area. Technical Data: Design: SCARA (4-axis robot) Nominal Load Capacity: 5 kg, Maximum: 10 kg Horizontal Reach: 850 mm Vertical Reach: Axis 3: 420 mm Orientation Range: J4: +/- 360° Repeatability (Horizontal): +/- 0.025 mm Repeatability (Vertical, J3): +/- 0.01 mm Repeatability (Orientation, J4): +/- 0.005° Maximum Working Range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum Operating Speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible Inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User Wiring (electrical): 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Outer diameter: 25 mm Press-in Force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting Type: Ceiling IP Protection Class: IP20 Power and Signal Cables: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: good (used), Year of construction: 1999, Nema NCG 4390 S Temperature shock chamber -40°C to +180°C Manufacturer: Nema Type: NCG 4390 S Temp. range: -40°C to +180°C Dew point range: +5 °C to +89 °C Mains voltage: 400 V Rated current: 32 A Nominal output: 15 kW Refrigerant: R 404 A Year of construction: 1999 Weight: 2720 kg External dimensions: W 3950 x D 1700 x H 2280 mm Chamber: W 3000 x D 1300 x H 1170 mm WLG STEAM-O-MAT Electric automatic steam humidifier and producer of mineral-free and odorless steam Manufacturer: WLG STEAM-O-MAT Type: EDB 8 Dsdpfx Ajuzgt Eed Nscg Heating voltage: 400 V Output: 6 kW Steam quantity: 8 kg/h Water-cooled condenser Manufacturer: Bitzer Water-cooled Mains voltage: 400 V Rated current: 13 A Nominal capacity: 4 kW Refrigerant: R 404 A Weight: 145 kg KK-08 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale: (For more extensive technical data, see PDF) Technical details of the machine: - Long-tube filling system with 40 filling valves and 8 KK plungers. - Pre-evacuation system to reduce oxygen intake. - Hygienic bottle table and stainless steel components for durability. - Mechanical adjustment range: 3,000 to 15,000 bottles/hour. - Performance range: 0.33l LN 3,000–13,500 bottles/hour, 0.5l NRW 3,000–12,000 bottles/hour. - Minimal oxygen intake: maximum 0.02 mg O2/l. - Conversion parts available for different bottle types (0.33l longneck, 0.33l Steini, 0.5l NRW). Advantages of the machine: The machine offers numerous advantages that enhance the quality of the filling process. - Gentle, product-friendly filling under CO2 atmosphere. - 50–60% less CO2 consumption compared to short tube filling systems. - High longevity thanks to reinforced drive components. - Hygienic design for easy cleaning. - Short changeover times. - Convertible to cans according to manufacturer specifications (conversion kit not included). Low operating hours: 3 days per week, 7 hours each; rarely operated for 4 days per week. Dcsdpfx Aswqz Nnjd Nsg Annual maintenance by the manufacturer. The machine is immediately available; it was only removed from production about 5 months ago. Original purchase price was approx. €330,000.

Condition: good (used), Vötsch VCS 7100 Climatic Test Chamber -70°C to +180°C Manufacturer: Vötsch Type: VCS 7100 Temp. Range: -70°C to +180°C Line Voltage: 400 V Rated Current: 17 A Rated Power: 11 kW Refrigerant: R404A Height: 1980 mm Width: 1350 mm Depth: 2060 mm Chamber: Height: 900 mm Dodpfxeuuix Ns Ad Njcg Width: 970 mm Depth: 1400 mm KK-05 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), Vötsch VCS 4100 Climatic Test Chamber -40°C to +180°C Manufacturer: Vötsch Type: VCS 4100 Dcjdpfeuuiygex Ad Neg Temp. Range: -40°C to +180°C Line Voltage: 400 V Rated Current: 17 A Rated Power: 11 kW Refrigerant: R404A KK-07 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, Year of construction: 2009, machine/vehicle number: 0701-250008, Rösler roller conveyor for the longitudinal transportation of profiles and sheet metal. This stable roller conveyor system is suitable for transporting materials in the steel trade or steel construction. The roller conveyor is 9.60 m long. The roller conveyor is powered and was used as a connecting roller conveyor between a Rösler blasting system and a Kaltenbach drilling saw system for transporting steel profiles and steel sheets. Dodpfoyild Asx Ad Nocg The height of the Rösler roller conveyor is 640 mm and the roller width is 2700 mm. The diameter of the transport rollers is 140 mm. Cross tractors are also available as a lifting carriage system on request at an extra charge.

Condition: used, Synchronous servomotor with holding brake and gearbox, geared motor, electric motor, angular geared motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8016 Machine type: Permanently excited synchronous servo motor DC link voltage of the controller Uzk: 560 VDC Rated power: 14.51 kw Rated speed: 3000 rpm Rated torque Mn: 46.2 Nm Standstill torque M0: 83.4 Nm Rated current In: 31.5 A Standstill current I0 / I0max: 54.9 / 219.6 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length 50 mm - Shaft journal with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver 1-pole pair - Option KK Terminal box - Option T1 (DIN-PTC double base insulated) - Power connection 8-pin junction box - Resolver connection 12-pin junction box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order no.: 718690 Art. No: Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 65 Nm Angular gearbox WESTFALIA Systemtechnik Hollow shaft output: internal Ø 65 mm Hollow shaft length: approx. 280 mm Djdpfx Adsf Dlzuj Nscg Gearbox output speed: max 450 rpm Speed gearbox input: max 4500 rpm. Transmission ratio: 10:1 - Shaft journals also ground on the outside - Gearbox can be mounted on two flange surfaces - Mounting hole on gearbox 180 x 180 mm / 180 x 230 mm Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg good condition

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Dcsdpjt Rmhajfx Ad Nog Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: used, Year of construction: 2011, machine/vehicle number: 1799-250034, The KUKA KRC2 / KR 60L30-3 robot was used for the automatic removal of components from a Kaltenbach KF 1606 flame cutting machine with a Remmert storage system. The KUKA KR60L30-3 robot with the associated control cabinet and controller is currently for sale. The Remmert storage system and the longitudinal traversing rail are no longer available. Dedpfxsyilcrj Ad Nocg

Year of construction: 2015, condition: ready for operation (used), Offered is an incomplete returnable glass filling and packaging line consisting of the following machines and units: Unloader: Kettner, crate washer: Bohrer, insert screens, 1x zone, 2 inverters, unpacker: Kettner Blitzpac A35 T1 year 2002, unscrewer: Adelski, cleaning machine: Krones Einend KESK year 1994, approx. 19.303h, EBI inspection machine: Heuft Spectrum Inline IR year approx. 2015, filler: Cobert, 60 filling stations, approx. 15,000 bottles/h at 1.0l, 1 pc. SV 10-digit, 2 pcs. KK 10-digit, twist-off capper: SWC year 2008, cooler: NIKO year 2015, temperature control: approx. 85°C - 30°C, labelling machine: Krones Prontomatic K090-A43, body, front and back labelling, dating: Markem Image, loader: Kettner Bojok, Born Binder. Processable containers/formats: bottles 0.2l/30-case, 0.25l (RW), 0.5l/24-case, 0.7l juice bottle, 0.75l (EW), 1l VdF/6-case/12-case, crates/formats: 1l VdF/12-case/6-case KuKa, 0.75l VdF/12-case KuKa, 0.2l/30-case KuKa, 1l/12-case carton. Viewing possible by appointment. Dcjdpfxjx Aupve Ad Nog

Condition: excellent (used), Three-jaw chuck Dedpfx Adjvwk Eae Nscg Make: Forkhardt Type F 200 Diameter 200 mm Short taper mount KK 8 Taper diameter 139.7 4 stud bolts M 16 Pitch circle diameter 171.4 Through hole 52 mm Weight 24 kg

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid Dcjdpfx Aeyidvded Neg - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Further technical information and documentation available upon request.